operable windows

Similar Questions

• What are the drivers, I need to connect to the internet for a GT5432 of operating Windows XP and not Vista?

  I asked before, but try to reformulate my question. In my opinion, it miss a driver I need or have bad installed. (of the re - install after a storm)

  Charter, my I, said that there is a problem with my drivers or the Ethernet connection. I installed a new Ethernet connection-SMC1244TX. Still no connection.  I called SMC customer support number - they me Charter connected - which gave me the number to the catwalk, who want to $99-149 to ask a question because it is not under warranty, because someone changed the Vista to Windows XP, I thought I found the download for the correct drivers, but when I put my flash drive on GT5432 - I was not able to get the files-now I can't locate the download again.

  So what are the real drivers that I need on the GT 5432 operating Windows XP so you can connect to the internet?

  I just skimmed the old thread. It's too long. I think you should have stayed there.
  This has probably already been given to you in the old net but that's...
  Go to http://www.smc.com/index.cfm?event=downloads.doSearchCriteria&localeCode=EN_USA&productCategory=9&modelNumber=1537&partNumber=0&downloadType=1&knowsPartNumber=false and download the driver. You will need your card, part number. He also says it's a SMC1244TX-1. Don't know if it's the same thing as what you have.

  I can offer help any more than that. If you need additional help, go to the old thread.

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• How can I remove vista of pc operating windows.old 1525 dell?

  How can I remove vista of pc operating windows.old 1525 dell?

  Hi Randy,

  Please contact the Microsoft Community Forums.

  Looks like you need assistance to remove the folder Windows.old in Windows Vista.

  You can use the disk cleanup tool to remove folders and files Windows.old. I suggest you to read this article for more information:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  How can I remove the Windows.old folder?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  This link also applies to Windows vista.

  Hope this information helps. Get back to us if you have more queries about Windows.

• Sistema hora Nome of the toda of operational Windows 7 Starter Evento de Problema reinicia: BlueScreen

  Problem event name: BlueScreen
  Versão sistema operational: 6.1.7600.2.0.0.768.11
  Identificacao da Localidade: 1046
  Ilha de sober information o problema:
  BCCode: 116
  BCP1: 84FF7008
  BCP2: 9103C9B0
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Quando appears a tela azul, as vezes, I can not burn nada, e muito rapido. QDO. travou vez, o coloquei Windows CD e renew a funcionar, desligando a hora toda; I have anti virus, toda checagem than FACO diz as esta tudo normal. No comeco, veio uma msg dizendo o disco estava corrompido. APOs ter carregado o operational again, esta msg não pareceu but, mas tudo archives lost e programas. Por favor, is alguem souber algo Agradea§o. system Fiz no ha PC 2 meses, o fato so occurred ha 15 dias

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Operable windows in VM Fusion

  Sorry to ask a such basic question, but I just have installed VM Fusion and when I click on the merge of the VM on the dock button, I thought it would open my Windows XP window, but instead, he opens the window of Fusion VM where I then open the window of Windows XP. Both windows then remain open, so that there a neat view I have on closing VM fusion and then have the window Windows XP running as I wanted.

  I installed incorrectly or is not granted the right to settings? As this process of the 2 step is a bit annoying (and I saw a friend using Parallels where this was not the case? Can someone guide me?

  Thank you

  If you want your windows virtual machine runs automatically when you open the merge request all what you have to do is click on the little icon star next to the virtual machine in the virtual machine library.    I've attached a screenshot of the star.

• operating Windows 7 Home Premium, 2 user accounts. Running a Firefox user can run audio and video, the other cannot. Can anyone help?

  Two accounts put in place. You can listen to some audio and video using Firefox, the other account can not. The account cannot broadcast a / v is able to steam has / v to aid (sigh) MS Internet Explorer. Is there a setting that I messed up?

  There are some compatibility issues between the last Flash drive and a few Add-ons Firefox or settings. Could see you if anything in this article helps you: 11.3 Flash does not load video in Firefox.

• Cannot open RAW files in items 10, now I use an old PC of operating Windows XP.  No prior problems in the use of items on my laptop which unfortunately died.  Help please!

  Who is your camera model, and what is the ACR version in your 10 items? Use the Help menu / about plugins.

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

• I wiped and recovered from my CD of my operating system to windows XP due to a virus, now my system XP is SP1 (version 2002) and needs to upgrade, how can I get the old updates please?

  I am operating windows XP, but it is more difficult to download anything, I can only assume its because my system recovery disk brought me originally pack 1 and missing essential items in my system which is used to enable automatic updates to work to get my system back to normal.

  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• Hard drive is about to fail. Y at - it anyway to get a copy of my platform operations is back with out and out window 10.

  I was wondering.  When this hard drive goes down and after I do system back up Will I need to buy a new operations * windows platform or I'll be able to download my old version so I can use the new hard disk?

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you to try the steps in the below mentioned thread and see if it helps you to solve the problem.

  A PC, why warn of a hard drive failure and tell me to run backup?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• convert the windows desktop to imac

  I plan to buy a new imac.  I currently have an operating windows 2010 dell desktop computer.  How can I transfer my files from dell to the imac?

  You can use the Migration Wizard from the to do.

  Move your data from a Windows PC to a Mac - Apple Support

  Or simply use an external hard drive and drag and drop.

  Most file formats can be opened on a mac very well

• Pavilion HPE h8 - 1360t: update to Windows 7 will not

  I made the fatal mistake of upgrade with a new installation of Windows 7 HJome Premium to Windows 7 Professional. After a lot of hunting to find the various missing drivers of WIndows, I was able to install a fuly operational Windows 7 Pro, but now I find that it will not update. I spent hours to examine and try the many "patches" (often contradictory) found on the Internet, but none of them did actually resolve the problem. The failure of Windows 7 update seems to be a very common problem, so I'm puzzled as to why there is no simple cure proven. It seems that I need to return to the Home Premium, but I thought I would try the forum before travelling.

  Hello

  That's the problem.

  Please read this article, in its entirety, by Ed Bott.

  The use of the Win 7 cumulative hotfix eliminates the problem.

  Jay

• Tecra M2 - 80GB HD - disk is broken - Windows doesn't start! Help!

  Hello

  I was working with my email using Outlook and just do normal operations, Windows just freeze!

  I tried to restart the PC, but unfortunately it seems that the HD has a serious physical problem.

  I need some data from my rescue disc and I don't know how to do. Do you know if there is a utility that can prepare the HD (those who are not damaged) RAW data and copy it to an external drive?

  Until additional information, I can boot from a floppy disk and I have an external HD which can be connected via USB or Firewire (but I don't know how to get back!).

  Please, any suggestion is very welcome!

  p.s. support people has only offered to change the HD, but they are not able, or by train, to do any activity of data recovery.

  Thanks for your help.

  Giampaolo

  Hello

  First of all, I want to write a small review on your problem. As you know, we have to pay for each service that needs to be done for the user. I am also sure you know there are a lot of stores or services that can save or read all data from broken HARD drive. Unfortunately this service is not for free. If you have a very sensitive and very important data for your business the best solution is to let the professionals to do this.

  If you want to try to do it yourself, it can be very complicated, but you can try. I talked to my friend and he told me that it is possible to do, but you should try to create a bootable CD. With this CD it should be possible to access on an external device like USB connected HARD drive. It gives me a link to an interesting page, and you can try to get some information about this. Check it on http://www.nu2.nu/pebuilder/.

  Good luck!

• HP Deskjet 722: HP deskjet 722 windows 7 64 bit

  installed the operating system of windows 7 professional 64 bit. now cannot get 722 HP deskjet to print.

  I used the system of operating windows 7 Professional 32-bit with no problems.

  printer installed on an XP system and the printer works fine.

  any ideas?

  Thank you

  Hi miltmaslin,

  After some additional research, I decided that there is no comprehensive software features available and drivers for this printer for Windows 7.

  I can only suggest to try a USB 2.0 printer cable to install the driver in OS as shown previously, otherwise please call our hotline at 800-474-6836 for your upgrade options. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• Windows Resume Loader black screen on HP Pavilion dv4-2145 dx laptop Windows 7

  I have a HP Pavilion dv4-2145 dx laptop with Windows 7. After pressing the button "on", the logo operation windows says its "recovery" windows, but a black screen titled "Windows Resume Loader" appears with the following message:

  The last attempt to resume the system from its previous location failed. Attempt to resume again?

  With the 2 following options:

  1. continue with system summary, (which does not work and I end up with the resumption of the "Windows" followed a blank black screen...)

  2 Delete restoration data and proceed to system boot menu (I haven't ' truei stops because I wasn't sure what that meant)

  But I managed to go to the reviews section diagnostic systems and it seems that he pass all 5 of the test, including hard drive and memory, poster, etc. So I don't know what the problem...

  Please notify.

  Thank you very much!

  Hello

  I think that in this case, you will have to choose the second option - "Delete restoration data and proceed to system boot menu" and see if that fixes the problem.  If all etc. documents you had open before hibernation were saved, then you should not lose anything.  If there are unsaved changes (for example if you have added to a document), the file will be to the point that his last record and you lose additional data.

  Kind regards

  DP - K