Operating system has been installed on the D drive

Similar Questions

• Received the error that my operating system has been installed too many times and does not allow installation.

  installs Windows is no longer permitted

  Hi, my sons computer crashed several times due to hardware problems. It resulted in windows being installed several times. He just had a disk crash and after installing a new disk, windows indicate that the key has been used repeatedly, not allowing an installation again. How can I fix it?

  Use the Activate by phone and speak to a live operator.

  Activate by phone

  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• Bad operating system has been installed. How can this be corrected?

  Hello. My uncle recently gave me her computer. He told me that he had somehow crashed his computer and reinstalled a new operating system. The problem is, he has installed an operating system for a Dell Windows XP. More than half of nothing works now, no wonder... In addition, this new operating system must be activated. It doesn't have the disk, he used or a product key the same unlock his computer. Could I download the correct operating system on a flash drive or burn the disc myself? Thank you for all your comments.

  Product: Presario R4000

  Windows XP Home Edition HP 2004

  S/N: [number of Series edited by Moderator]

  P/N: PX356UA #ABA

  If you need any other number located on the laptop it please let me know. Thanks again for your help.

  Hello

  He is a third-party site where you can try to get a set for your device recovery disk. But don't know whether they have it or not.

  http://www.restoredisks.com/

• Error code 0 x 80040154 appears when I try to copy a music cd, media player does not read a cd that has been installed in the disk drive

  as above, turn on windows media player, insert a music cd to rip and does not recognize that the cd has been inserted, are asked to insert the cd when there is already one in.

  Hello

  1. is the issue limited to any particular CD?

  2. What is the file format of the music files on the CD?

  3. are you able to burn other files using the CD/DVD drive?

  4. is the CD/DVD drive detected in Windows Explorer?

  5. What is the brand and model of your DVD player and the computer?

  6. have you done any software or changes to the material on the computer before this problem?

  You can see the steps in the link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  See also:

  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

  http://support.Microsoft.com/kb/929461

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

  Hope this information is useful.

• My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but every time I open a fil

  My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?

  Hello

  Acrobat 7 is not supported and an older version of Acrobat.

  Also, it is not compatible with Windows 7.

  This could be the reason why you are faced with it.

  Please see this link.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Concerning

  Sukrit diallo

• How to check what Feature Pack has been installed on the PeopleSoft system.

  Hello

  How to tell what (FP1 or FP2) Feature Pack has been installed in the PS HCM 9.1 applications and FMS 9.1 or installed any Featue Pack?.

  Thank you.

  I don't think you can directly check the FP level. Which means that you can not simply query a table and determine the level of the public Service.

  You should check the level of patch/bug in ps_maintenance_log and compare with FP

• Is there a simple way to determine if an operating system has been virtualized?

  Is there a simple way to inspect a linux system, perhaps by a hook / proc, to determine if an operating system has been virtualized?  More multi-vendor is the solution, the better.  I don't know that I could grep through my table and system process for various metrics file, but I need something very stable, well known, and Boolean.  (This question has overcome my google skills as it is too vague for the sentence)

  Hello

  Yes, it is called red pill and you can watch the material using the command lspci or RedPill to determine more information.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer.

  I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer. My computer print very well so I do not know why it does not scan.

  Hello

  Thanks for the information. Two things to try. First of all, try to align your print cartridges using the controls on the printer display panel. As part of this process, the printer will print on a sheet of alignment that you place on the printer and scan in the printer. See if it works successfully. If not, see the following page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02451000&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0011 .

  The second thing to try is the print and Scan Doctor Utility, download here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-114642-1&cc=us&dlc=en&lc=en&os=4063&product=5061082&sw_lang=. Its a standalone process and requires no explanation.

  Let me know if one of them fixes the problem.

  Kind regards

  BearPup

• Hi, I tried to download Photoshop CS5 on new Macbook but received message: this serial number is not valid for this product. Previously, it has been installed on the PC.

  Hi, I tried to download Photoshop CS5 on new Macbook but received message: this serial number is not valid for this product. Previously, it has been installed on the PC.

  Purchase http://www.adobe.com/in/products/photoshop-premiere-elements.html

• I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  Hello

  Please access "' programs and features'" and uninstall the Photoshop CS5 and access the link as follows to download the program installation of Photoshop CS5 and re - install and activate it with the serial key you have.

  Download Adobe Creative Suite 5 products

  Thank you.

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• How to know if Vista SP1 has been installed on the Satellite P200

  Can someone tell me how do I know if I have Vista service pack 1 on my laptop P200?
  Some updates on day of Tempo of Toshiba requires it, but I don't know if I have it!

  'Computer', 'properties' simply said Vista Home premium.

  Thank you.

  If you do not find in *-> System Control Panel *, then SP1 has not been installed on the laptop

• System has been infected with the cuaari.exe Virus. Impossible to delete.

  UNALE to remove hidden files

  I have system has been infected with a virus called cuaari.exe that one of the antivirus is not able to remove.
  The problem is whenever I have connecct to my external hard drive or USB it makes all files as shortcuts, so you can't click on them. from the command prompt I did a "dir / Ah! ' to see the hidden files and I saw cuaari.exe there, but I did"del cuaari.exe"it says unabale to find any file... Please let me know how to remove these viruses type hidden.

  Hi Abhishek,

  ·         What is the antivirus installed on the computer program?

  ·         It is updated with the latest virus definitions?

  You can run the Microsoft to check security scanner for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Also, update the antivirus program on your computer with the latest.

• I don't know if Vista sp1 or sp2 has been installed on the Acer Aspire deskton.

  Hello

  A notification came sayng Vista sp1 must be installed. We had just aiinstalle Norton 360, then we have disabled to install Vista sp1. The download is complete and the computer has begun to install three downloads. The first download is installed without problems and went to the 30% bar install the second download when in the middle of the installation, the computer said computer closing screen. I knew we were in trouble, because he read on the screen during the installation do not stop computer during installation. Message came after the computer restarted him comes from message on the black screen, saying that the computer is not close properly and the 0xc01a001d 37038/95074 (\Registry\machine\components\Derived data...). I tried everything to get it started all the suggestions, but still a black screen, the biggest problem with this computer, is there had never been installed sp1, sp2, or any protection because it was purchased, I think that somewhere to 2006 or 2007 may 2008. It is an Acer Aspire desktop computer.

  Thanks again,

  gmax3

  If she never had no installed protection because it was purchased, my suggestion is simple, albeit drastic.

  Make sure that your backups and serial numbers and product multimedia/installation/etc key is complete and stored on the computer in question.  Restore the system to factory in any way has been given by the OEM, upgrade completely (all service packs and posterior to the service pack updates) and install your anti-virus software. Reinstall your applications on which would not have been restored in the factory reset.  Update all software from third-party manufacturers to their latest versions.  Install all drivers for newer hardware devices.  Restore your personal data on the machine.

  You'll find yourself with something you can do better than what you have now.