Options for monitoring or recovery of C-Series system performance statistics, series EX codecs

Similar Questions

• Key the Option for monitoring REMOT sx20

  SX20 shows "snapshot requires a key option for remote monitoring. but I have not received any key option with the option key of remote monitoring feature of Cisco. another link said remote monitoring option will require additional cost of 1 January 2016. Now my question is how to activate it and if it takes the cost what is the part number for key option for remote monitoring...

  The obligation to have a key Option Remote Monitoring installed to see snapshots of the cameras and the content on the page of the Web Interface call control was introduced in the version of the TC7.3.3 software.  If you are running a version of software before that, then you will be able to see the snapshots without such a key installed.

  To get the key of the remote control, you should buy Cisco, is around US $100 price per endpoint.

  The license you wish to lie beneath the level superior SKU L-TP-RM.  Then choose L-C-SERIES-RM, L-MX-SERIES-RM, L-SX-SERIES-RM, L-EX-SERIES-RM or L-TEACHER-SERIES-RM below, according to what end point of model you need to.

  There are a number of people in the forums who see it as nothing else that a money grab from Cisco as they now charge for a feature that should be free.

  This has been discussed several times in these forums before - some links to sample on this feature, the necessary licenses, and problems with the features are:

  • tc730-websnapshots-broken-even-further-design
  • TC-option-key
  • topic-cisco-telepresence-sx20
  • published tc734

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Pavilion 15 t: support Options for recovery

  Is it possible to create system restore CD / DVD?  The only option I see is USB.   Is the only option for the creation of the USB system recovery media?

  Two chat sessions with HP and they couldn't answer the question.  I found it myself.  You must use the Recovery Manager and it offers you the possibility to DVDDL, DVD or USB.

• What is the recommended for El Capitan recovery process?

  What is the recommended for El Capitan recovery process?

  I just upgraded directly from Mountain Lion, and I see that my recovery disc has disappeared.  My recovery disk wizard is only good for Lion and Mountain Lion.  I searched Apple.com and found a complicated process by which I could use the Console and create a bootdisk with the option reinstall, but I can't believe that this is the recommended option for a common user?

  So is time machine bygones?  I noticed that it is dimmed in the Menu bar?

  Certainly, you can restore El Capitan as you would with any other version of OS X - using the HD Recovery. I have no idea why your Recovery HD disappeared. Usually this would cause by user error. However, you can create a standalone install OS X on a USB FlashDrive for emergency use. This has been an option because at least Mavericks:

  Do your own installation of El Capitan using the El Capitan tool flash drive:

  You can create an installer of flash of El Capitan via the Terminal drive. El Capitan has its own manufacturer Installer integrated that you use via the Terminal:

  You'll need a freshly partitioned and formatted at least 8GBs. USB flash drive leave the name of the flash drive on the system by default, "Untitled." Do not change this name. Wait as the full process that will take some time.

  Open the Terminal in the Utilities folder. Copy and paste the following line in its entirety in the Terminal window.

  sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath X\ "/ Applications/install OS X El Capitan.app.

  Press RETURN, enter the admin password (will not resonate to the window) then press RETURN again.

  You must have setup in your Applications folder or change the paths in the command line above.

  You can do the same thing for Yosemite by making the appropriate substitute for the installer in the above command line:

  Make your own Yosemite flash Installer drive using the tool of Yosemite:

  You can create an installer of the Yosemite via the Terminal flash drive. Yosemite has its own manufacturer Installer integrated that you use via the Terminal:

  You'll need a freshly partitioned and formatted at least 8GBs. USB flash drive leave the name of the flash drive on the system by default, "Untitled." Do not change this name. Wait as the full process that will take some time.

  Open the Terminal in the Utilities folder. Copy and paste the following line in its entirety in the Terminal window.

  sudo/Applications/Install\ OS\ Yosemite.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath/Applications/Install\ OS\ Yosemite.app X\ X\

  Press RETURN, enter the admin password (will not resonate to the window) then press RETURN again.

  You must have setup in your Applications folder or change the paths in the command line above.

  In addition, to Yosemite and earlier you can try using DiskMaker X.

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• Three Options for Optiplex 780 follow-up?

  We have about 25 users who need 3 monitors for monitoring systematized and real-time data analysis. These users do not enter our requirement of workstation group. IE, they came away who need the performance of a workstation availability, although the need for the three monitors.  If it is difficult to justify one for their needs.

  I hope it has a healthy option available to provide any Optiplex 780 and 760 users with support for three monitors. I must point out, these are the models of office, the second most available small, who is probably the choice that much more limited. Currently we run the standard ati DVI and the adapter y - vga allowing them their two monitors. If we add a second video card flat with vga connector, the system would allow the three monitor is to be active? (windows xp and windows 7). I don't see a low profile card that would allow two monitors off the dvi (vga y adapater) more a stand-alone vga.

  Recommendations on how to do this without a rip and replace it?

  Thank you guys!

  Not looking at the whole picture.   DMS - 59 to two DVI has 2 outputs.  Out of each DVI DUAL LINK is the sense it has a DVI - D and DVI - A so he can do 1 digital and 1 VGA monitor with the 2nd cable Dell.     If you use 2 cables with 2 outputs DVI - A, you get 4 monitors.

  The other card more expensive that I linked has 4 DVI connections.

  

  Does not seem to you look at the links however to make me wonder if you're just a bot posting endless questions.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the extended help display option for multiple displays.

  I have a laptop with an internal (#1) designated as my screen main screen. At work, I like to use the 'extended display' option for several screens to use the external desktop as #2 display monitor. However, at home I have the screen internal one on my laptop. So when I open an application like Excel at home, the window does not appear, but the application is running, as I confirmed with the Task Manager. So far, the only way I know to solve this problem at home is to change my display settings for multiple views to show on display #1 only. Is there a practical way to deal with this issue in addition to change the display settings whenever I move from work to home and vice versa?

  Hello

  In Windows 7, you can simply press the Windows Logo + P key.

  In the menu, select the item from the computer only .

  Concerning

• For Windows 7 recovery disk

  First of all not to back up files.  Hard drive died.  Wanted to know if I still can do for Windows 7 recovery disk because I still have the product code indicated on the back on my laptop.  Is there a link that I can use.  I got the recovery from the production disk, but they do not work properly.

  Thank you

  Consider the following text:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  and

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• IDS/IPS signatures for monitor audio/video streaming applications

  Hi people,
  Can someone Advisor on the names or signatures that could be used successfully to control the use of streaming on the network applications. The plan must feed to MARS and then create reports on streaming applications use to use it later for the creation of a security policy preventing the theft of bandwidth.

  Perhaps suggestions on how to create a custom signature to monitor the audio and video streams would be appreciated.

  Eugene

  Hello Eugene,

  It is possible to matching strings video specified in your capture by examining the Type of content. Run after the connection with a TCP reset or refuse the inline package will keep the video of the game - which will save bandwidth that the video would have used otherwise. However, it is important that we establish the role of the IPS appliance. The IPS is designed to detect and limit the attacks by matching known traffic patterns. For TCP, this obligation can also include some that drop a bag to disrupt a flow. The IPS is not fundamentally designed to monitor flow and provide a number of bytes for a particular protocol so that the use of protocols analysis can be performed.

  The signature below will drop packets with the flv-application Content-Type, which will keep the video that you have tested on break.com of play. Each video streaming site works differently. A screenshot of each video streaming site will have to be examined and another custom signature written, if you want to block all. Also, keep in mind that many sites offer different options for streaming videos. It may ask you to take multiple shots at each site - one for each method of streaming.

  signature-60001 0
  alert-severity average
  GIS-description
  Flv-application TCP SIG - name string
  output
  engine-tcp chain
  products-event-action alert | Reset tcp-connection
  Regex-string flv-application
  service port 80
  the service management
  output
  alert frequency
  Summary-fire-all mode
  output
  output
  status
  enabled true
  output
  output

  Thank you

  Blayne Dreier

  IDS Cisco TAC team

  * Please check our Podcast *.

  TAC security show: http://www.cisco.com/go/tacsecuritypodcast

• I desperately need the key sequence from tap to install options for factory of MS. HP G6 disks with windows 8

  I desperately need the key sequence from tap to install options for factory of MS. HP G6 disks with windows 8 OS. Fractured and the nonitor laptop monitor does not turn on during this process.  examplechoose an option scroll 2 3? I can't see ty ty

  Hi Masquerade,

  I suggest you to contact HP support.

  http://WWW8.HP.com/in/en/support.html

  I hope this helps.

• First CC 20141 for monitor audio 5.1 configuration problem

  I'm working on a major project that I'm doing a 5.1 audio mix for. The problem is that I can not the first to play something else than stereo audio. It is therefore impossible to monitor the audio that I try to mix in 5.1. Counters seem to indicate that the audio is played correctly in the program, but nothing I've tried will not let me control correctly.  I'm on Win7pro 64 bit, with a card the Sound Blaster Z. I just bought this sound card specially for this as in the past I did a 5.1 mix (in Cs6 (I think) with a sound blaster Xfi Titanium HD card and it worked fine. This card has a creative ASIO I select in the menu Audio material but it only gives me options for the l/r channels, and I can't find any other way to add additional channels card. I also tried ASIO4all and he will also only stereo channels map.

  On a related note, this card is configured properly and outputs 5.1 audio perfectly in windows, and in all the speaker configuration tests I ran. What can I do to set it up to make it work properly in first?

  Jay

  So in fact several research it turns out that in a last update of pilot, Creative has replaced channel 6 original able "Creative Sound Blaster ASIO" with a new "Creative SBZ ASIO" which only supports two channels. I was able to load the old drivers prior to the change and get 5.1 working properly first.

• How to pre-order carrier free/unlocked iphone 7 more, pre order page his not giving an option for that.

  Hello. I wanted to buy an iphone 7 more factory unlocked. I'm going out of country next month so I have to use outside of US. I tried pre order but it is asking for my carrier, (I use Tmobile but I have to use this cell phone in another country) there is no option for iphone "carrier free/unlocked. How am I supposed to order free iphone carrier?

  7 iPhone more

  You will not have this option until Apple offers it. It should happen fast enough, but no specific timetable.

  Good luck

  GB

• When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc.

  When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc. It only shows the parameters for the flash player. How can I fix?

  You can find the URL of the thumbnail by following these steps:
  In the context menu, choose {inspect element}.
  Now, you can see the URL in the source down (perhaps you click the small arrow to the left of the line of seledted firstly to show).

• No option for the email address for the import

  I import the list of 'people' to outlook.com in a csv file. When I get the choice to realign the fields of address book to import data record, there is no option for 'email address' in the record to bind to data. Everything what is important is the name and surname of the person (which I chose) but I want their email also. Have I missed something or if the e-mail option has been deleted for some reason any?

  OK, I created a file OutlookContacts.csv in my Hotmail account and haven't tried to import as usual and found, like you, there is no e-mail address in the "Record of import data" column. So, I open the csv file in a csv Editor (CSVed) and found that the e-mail address is in the column 48 of 56 column file. I deleted all the unnecessary columns to make a file of 16 columns. According to realign the records from top to bottom and checking the boxes for the areas concerned, the new csv file imported perfectly.

  I guess that TB has a limit on the number of columns that are read during the import.