Similar Questions

• Quick response requested: Optiplex 390 and SSD - Possible?

  The law firm I support plans on adding help 'temp' during a recent case and add several good jobs markets for this effort. Our local Microcenter (Denver) a lot of things on a lot of desktop Optiplex 390 SFF "refurb", and it's MY contention that one of the best things to do during the duration, is to equip each of the units 'up' for review with an SSD just as inexpensive, to maximize the performance and "value".  My question on this forum: CAN the Optiplex 390 "correctly" support an SSD (IE: ability to AHCI BIOs)? Otherwise, I can 'opt' for an Optiplex GX790 of even inexpensive, but they are available only in very limited numbers of our Microcenter, as well, my curiosity re: the Opti390 and an SSD.

  Input is requested on the 'ability' to support an SSD with the Optiplex 390...

  The 390 has Intel Express Chipset Sata 2.0 H61

  It does not support the Sata 3.0.

  Its core I3 or Core I5

  SSD will work SATA 2-speed and I don't know about Player settings in the bios.

  AHCI and advanced format requires F6 drivers for windows 7 and below.

  A bus adapter host as a 600 x 1 rocket series card you would get ahci sata 3.

  http://www.Newegg.com/product/product.aspx?item=N82E16816115072

  http://www.Dell.com/downloads/global/products/Optix/en/Opti-390-technical-Guidebook-051911.PDF

• Newbie upgrade question

  I have an Optiplex 390 and I need to upgrade the video card. I am visually disabled and need to upgrade to run special software correctly. Someone recommended the

  GeForce GTX 650 Ti 2GB GDDR5 PCI Express. I'm a little nervous going into the bowels of this machine, but I noticed that it needed 400 watts. Looking at the online manual this unit is only 25 watts said... I'm missing something. I think that this card just plug.

  I'm kinda a newbie in the world of the upgrade, but not computers. Any help would be just super :)

  Hi Heymate,

  Your computer will support any PCI Express x 16 graphics card and the system has 265 Watt power supply (PSU). So, when buying the graphics card, you will need to upgrade the power supply on the system.

• Before the USB Ports does not. Dell Optiplex 390

  Hello

  I recently bought a used optiplex 390, I did a fresh install of windows 7.

  The front USB ports refuse to work (the back ones that work very well)

  I tried upgrading the BIOS, then the chipset, but still no luck.

  Any ideas?

  Set to refuse to work.  The front ports allow only 100ma of power for keyboards and mice. Need power 500ma USB flash drives.

  Façade cable may be broken or the ports themselves perhaps.

  HOWEVER, this model and many other dells can disable various ports in the bios.

• List of Dell Optiplex 390 CPU?

  Hi all

  I just got your desktop Optiplex 390 (waistline). I've looked everywhere for a list of CPU for this PC but I can not find a.

  I know that it can take i3/i5 of 2nd generation of CPU, but which models specifically? each of them?

  Thank you

  2011 Optiplex 390 has been validated only with the following i3/i5 CPU =
  MHF7R Sandy Bridge i5-2400, 3.10 GHz, 6 MB, 95w, 4 c, D2
  950R3 i3-2130 Sandy Bridge, 3.40 GHz, 3 MB, 65w, 2 c, Q0
  972H 5 i3-2120 Sandy Bridge, 3.30 GHz, 3 MB, 65w, Q0
  5MH9T i3-2100 Sandy Bridge, 3.10 GHz, 3 MB, 65W Q0

• No power on a Dell Optiplex 390 activity

  Hi, when I put the power cord in an Optiplex 390 light orange on the motherboard turns on and the power button starts flashing orange.

  None of the diagnostic lights turn on.

  When I press the power button / nothing happens.

  can someone tell me what's wrong.

  stefandewal

  The Optiplex 390 SFF has exclusive power Dell supply, as well as the units shown here:

  https://www.Amazon.com/DP/B00ZR54C48/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687702&pf_rd_s=Lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00CPPXKPK&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=KVBK5V64SXQJFCKFET0H

  http://www.Newegg.com/product/ProductList.aspx?description=power%20supply%20For%20dell%20optiplex&submit=Ene

  Bev.

• (Redirected) Power Supply for dell optiplex 3010 & optiplex 390

  Hi, may I know how much cost for dell optiplex 3010 & optiplex 390 power supply, because

  my diet already dead and how I want to order it... :(....

  Hi Nathalie,.

  Please repost this in the forum Office help.

  http://en.community.Dell.com/support-forums/desktop/

• OptiPlex 390 - cannot uninstall Dell system detects

  I am running Windows 7 Professional 32 Bit on an OptiPlex 390. I'm having withdrawal issues Dell system detect. According to the Panel of configuration/programs and features, DSD version 5.5.0.19 and DSD-1 version 5.14.0.9 have been installed on my system on 16/02/2015. 2/18, I disabled the DSD using msconfig from run every time you start. 28/2, I tried to uninstall by using the control panel configuration/programs and features. I got a popup saying "an error has occurred all trying to uninstall Detect Dell system. It may have already been uninstalled. You want to remove in the list of features and programs? "I clicked Yes, and received this message,"you don't have sufficient access to remove Dell system detection programs and features list. Contact your system administrator. "When I connect via the administrator account, DSD and DSD-1 are not appear in programs and features list.

  I know that DSD and DSD-1 have not been uninstalled from my system. I see a DellSystemDetect.exe running in the Task Manager, although I disabled it in msconfig. It appears as the network in my firewall activity, although only RSD-1 version 5.14.0.9 is indicated as having been active. The DSD icon appears in Control Panel/Notification area icons.

  How can I get rid of this? I guess I could just to deny access to the network through the firewall, but it is not a very clean solution. I want to go! Any suggestions on how to get rid of this beast? Thanks for your help.

  You should be able to appropriate all the files belonged to the origiynal account that you just created.  You will need to log on as an administrator and grant ownership to the new account.  Once your other has the property, you can remove the old one.

  Bookmarks can be exported to a file and then imported into the new account.

• OptiPlex 390 DT, Palit NVidia Geforce 210 is not detected in the PCI slot (as shown in the BIOS)?

  Hello gentlemen!

  I would like to know why the graphics card is not detected in my PC.

  The graphics card is 64-bit 1024Mo sDDR3

  And the CPU has

  Intel I3, 6 GB ram

  -Installed the gpu

  -Start windows built in graphics

  -installation of the driver fails two albums and the latest drivers downloaded from Nvidia or Palit saying there are no devices detected installing

  -checked the BIOS and I saw that pci slot where my g-card displayed an [empty]

  -traveled around the bios by any disabling of options for my integrated in the card or anything... any

  -checked around dell.com and saw that nvidia geforce 210 cards are compatible with my pc model exactly, even if this compatible graphics card has been a model of Evga, not a model from Palit.

  -which is where I started scratching my head

  Is there other details, that I need to provide?

  I appreciate the help.

  The 210 was a terrible GT card when it comes to compatibility.  Brand can also make a difference. Given that the GT 210 is an old map of the series, I would say get a GT 610 rather like this one HERE and turning the GT 210.  The EVGA TG 610 is also mentioned as being compatible with the Optiplex 390 DT.  I assume that you bought a PCI Express X 16 video card and not a PCI card, correct?

• Connect the TV (with sound) and monitor for Optiplex 390

  Here is my system info:

  OptiPlex 390 small footprint

  Windows 7 64 bit

  Intel Chipset H61

  Intel HD 2000 (with HDMI and VGA) graphics card

  Map of AMD Radeon 6350 512 MB video (with 2 DVI splitter)

  I need to connect 1) HD TV with the sound via HDMI and 2) monitor via VGA to this system (no sound).  I did a lot of research on the Internet but can't find a definitive answer if my system will support both views.  Can anyone confirm if one of the three options below does not work, or any other ideas?

  Option 1: remove AMD card, connect the HDMI TV, connect the VGA monitor.  I've seen conflicting information if the HDMI and VGA ports can be connected at the same time.

  Option 2: Connect TV: dispatcher--> DVI HDMI adapter DVI-->--> TV, monitor connect a HDMI cable: dispatcher DVI DVI VGA adapter--> monitor-->.  It should work, but if someone can confirm if the AMD Radeon 6350 supports audio through DVI to TV?

  3rd possibility: buy another video with HDMI and VGA card.  I'd rather not spend more money... I have six systems to connect!

  Thank you in advance for your help!

  Hi Ozone72,

  Intel HD Graphics 2000 which was shipped with OptiPlex 390 supports two independent screens. Which means that you can connect TV for VGA and HDMI monitor, so that AMD card must be removed from the computer.

  Please try it and return back if it worked.

• Speakers for OptiPlex 390

  I use an OptiPlex 390 in my living room and I want to add speakers for streaming music online in the living room.  What speakers are recommended, price, and what else do I need to put in place?  sound card?  How will I know if I have a sound card?  Are there wireless speakers?

  Hey divas salon.

  Your Optiplex 390 initially provided with a card its in. You can go to Wal-Mart, best buy, Radio shack or anywhere else that sells computer speakers. You do not have a wireless to your sound. The speakers will have to plug in the back of the pc. You should see three small plug-ins that are on the same line in the back. One will be green, blue and pink. You would plug the speakers into the green. Regarding prices, they start at $20 and go back.

• Desktop Dell Optiplex 390 computer. Each USB Port stopped working

  Hello!

  I'm at my wits end. Turned on my Optiplex 390 a few days ago and found that my keybord or my mouse was working. I tried all the usb ports on the front and back. When I plug inn the keybord the numlock, capslock and scroll lock lights upp for half a second, but it was not detected.

  I can't get into the bios. as my keyboard is not detected at all. start or windows or linux or back or Freedos.

  My Bios is A01. Is trying to update, but you know no keyboard, I tried to reset the bios by the rider and take out the battery for a few hours. to no awail.

  Can anyone think of what the problem might be? doubt his material because none of the usb ports work and that they should be on different controllers.

  Manual says that the 390 office has an intrusion switch. See the manual for the location of the connection on the motherboard and the trace of wire to the switch.

  Blue button / stop more amber LEDs 1,2,3,4 is not an error code documented.

  Are you sure that you have disabled the BIOS as speed tells you how?

  You will have to strip to bare essentials, but more like the failure of the motherboard.

• I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

  I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available had merge to HDR & Panoramic photos. I can't find these. Where can I find them.

  It is unfortunate that Adobe has chosen to use the "update" in the notice inside LR 5. It is not an "update". It is an 'upgrade '. Thus, you pay if you want. Also as usual, Adobe directs clients to the CC solution and makes it hard to find perpetual license option.

• OptiPlex 390 A00 to A02 bios upgrade question.

  Hello

  I'm going to preface my post by saying that I always leave updates the bios as a last resort. That said, I just bought a moherboard replacement for mine who died in a power brown-out last weekend. At the level of the bios on the replacement card was A00. Because of problems that I had to get the machine to start, I decided to update the bios. I downloaded A11 to install, but he says a02 is a sine qua non. I downloaded and installed A02, and after successful installation and reboot, bios does not recognize the sata drives. I tried to change patterns of sata, fading to the bios, reset does not. It is all linked to a bigger problem I'm having, but recognizing the sata disks must be dealt with in the first place. Is it possible to go back to A00 or transmit to A11 with a boot USB disk?

  Thanks for any help!

  Rick

  You probably do not have the boot HARD drive connected to the SATA0 first...

• OptiPlex 745 upgrade to Windows 7... some advice please

  Hello everyone and thanks for any help you can provide.

  I have an Optiplex 745 Core 2 Duo running Vista as OEM operating system. Works very well. This machine to the death of love.

  You need to add a USB device that requires Windows 7 media center to the function. He was going to try this one on my Dell GX280 but ti reports seem to indicate that the machine may not be up to the execution of 7.

  Questions: Problems with this process that I should be aware of, such as:

  (1) is it better to clean up the C drive and start from scratch, or upgrading works well.

  (2) the Dell driver site does not list Windows 7 as a driver option. Do the drivers Vista for video, audio, ethernet, etc. work just as well.

  Thank you

  It seems that Windows 7 offers a method to do a cover of clone an external hard drive. Found this feature on my Vista machine, but not on my XP system.

  Who will be my backup recovery for the day came to replace the C drive.