ORA-00845: MEMORY_TARGET not supported on this system

Similar Questions

• MEMORY_TARGET not supported on this system

  Hello
  
  I'm not a DBA, but during the agreement to the database for a performance test, I changed theMEMORY_TARGET to 32G using Enterprise Manager. My oracle 11g Linux database is. Then I shut down the oracle using sqlplus.
  
  But while startup, oracle launches due to error.
  
  ORA-00845: MEMORY_TARGET not supported on this system
  
  
  Now I'm stuck. Try event preforming recovery using Enterprise Manager but his failure with the similar error.
  
  RMAN-04014: failed to start: ORA-00845: MEMORY_TARGET not supported on this system
  
  
  Please suggest me how to restore this setting, and then restart the database.
  
  Thanks in advance,
  Shiv

  Hello

  This error occurs if your/dev/SHM as Linux does not have enough memory.
  by default, / dev/SHM 1/2 of your physical RAM, so I assume that your server has less than 64 GB of memory.

  Just change the entry in the/etc/fstab to use 40 G (instead of the default which is online right now), then your database should be able to start (you will need to back up/dev/shm, tmpfs resp.

  Check with df k your tmpfs has enough free space to hold the 32 GB of your database.

  Concerning
  Sebastian

• FF DOES NOT OPEN. SAYS IT IS 'NOT SUPPORTED ON THIS SYSTEM"USED TO WORK VERY WELL.

  Icon has disappeared from the dock, notice says "Firefox not is not supported on this system", the icon in the Applications folder has now a line circle and slash through it. That's happened? I tried to re - install and got the same result. Am running OS 10.4.11

  The latest version of Mozilla that works on the old 10.4 has Firefox 3.6.18. From Firefox 4.0 and newer Intel Mac and OSX 10.5 and newer is necessary to make it work.

  http://www.Mozilla.com/en-us/Firefox/all-older.html

  However since you use a PPC Mac there is an option of third parties to the http://www.floodgap.com/software/tenfourfox/

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• Produce pages with required checksum error: encryption function 'SH512' is not supported on this system

  Hello

  I encounter errors in an application of apex.oracle.com was exported to another environment.

  My target environment is:

  Apex 5.0.0.00.31

  Database 11.2.0.4

  Error page displays:

  The encryption function 'SH512' is not supported on this system.

  Contact your administrator for the application.

  • is_internal_error: true
  • apex_error_code: WWV_FLOW_CRYPTO. UNSUPPORTED_FUNCTION
  • Component.type: APEX_APPLICATION_BUTTONS
  • Component.ID: 8787606655825740717
  • Component.Name: COPY
  • error_backtrace: - PL/SQL call stack - line object handle number name of the object 0x1d785dc58 641

  package APEX_050000.WWV_FLOW_ERROR 709 0x1d785dc58 body

  package APEX_050000.WWV_FLOW_ERROR 0x1d785dc58 1013 body

  package APEX_050000.WWV_FLOW_ERROR 0x1cde954b0 328 bodies

  package APEX_050000.WWV_FLOW_CRYPTO 0x1ddf7b498 1506 body

  package APEX_050000.WWV_FLOW_SECURITY 0x16f574d40 9657 body

  package APEX_050000.WWV_FLOW_UTILITIES 0x1d7fa7ed8 370 body

  package APEX_050000.WWV_FLOW_BUTTON 0x1ed9fe680 2288 body

  package APEX_050000.WWV_FLOW 0x1ed9fe680 2351 body

  package APEX_050000.WWV_FLOW 0x1d71535d8 1720 body

  package APEX_050000.WWV_FLOW_DISP_PAGE_PLUGS 0x1d71535d8 972 body

  package APEX_050000.WWV_FLOW_DISP_PAGE_PLUGS 0x17bf9b618 2221 body

  package APEX_050000.WWV_FLOW_PAGE 0x17bf9b618 2447 body

  package APEX_050000.WWV_FLOW_PAGE 0x1ed9fe680 4938 body

  package APEX_050000.WWV_FLOW 0x1d79de248 173 body

  procedure APEX_050000.F 0x1d77eeb10 33 anonymous block

  This seems to be related to the buttons on the page that redirects to pages that have the value Arguments Page Access Protection must have Checksum.  If I hide buttons, or change the page on the target pages access protection Unrestricted page works fine.

  Bug in Apex 5?

  Hi 1043414,

  APEX 5 works on 12 c, where SH512 is supported. Default APEX uses the most secure algorithm on the platform where you develop. If you need to copy the app to 11g, please make sure that the checksum algorithm is supported on this platform. Go for the shared components > security attributes and click the Bookmarks button expire, where you can change the algorithm.

  Kind regards

  Christian

• Can you please help me low grade that my 4.0 to 3.5 for the school system - 4.0 only is not supported by my system schools online, if I had known this I would not have updated.

  I have since moved from 3.5 to 4.0, that this version is not supported by online systems of my schools-so anytime there is a problem, they are unable to help him? Is there anyway for me to downgrade to 3.5. I'm already having problems, even entering the system!

  I really don't want to go back to IE, please help me downgrade to 3.5, so I can stay with you guys.

  Thank you very much for your help!

  Sincerely,
  Lindsay Walton

  If you switch to Firefox 3.5 you will lose historic navigation and cookies. If you switch to 3.6 you will not lose data.

  Downgrade to Firefox 3.5 or 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  If you need to go to 3.5, you can get the latest version of Firefox 3.5 http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.5.18/win32/en-US/

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• When I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system."

  Tablet not working help please
  OK so I have a tablet that I use to draw for my photoshop... it worked perfectly fine but when I tried after months of non-use, it won't work. and when I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system." I know that it worked because I installed it but now it's just dosnt work... Please help me because I want to draw again.

  Hi LoverofDrawing,

  I suggest you reinstall the drivers for the tablet on the computer by visiting the manufacturer of the Tablet and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• VMware Tools: VMware Tools don't is not supported on this operating system

  On one of our server VMware Server 2 (Version 2.0.2 Build 203138 (Linux version)), I made a new standard of Windows 2008 edt. Comments of 32 - bits. When I try to install the vmware tools, I get the following message: "VMware Tools is not supported on this operating system. When I check the setting guestos vmx file indicates "longhorn." Someone knows how to fix this?

  You can always get the windows.iso manually and see if you can install the tools.

  First, make a snapshot!

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• My Mac with OS 10.5.8 says I can't open Firefox because it is not supported on this architecture. I tried to update my version, and that's all I get now. What can I do to use Firefox again? Thank you.

  My computer is not allowing me to use any version of Firefox, after several attempts to download. Simply, I get a message that Firefox is not supported on this architecture, and the Firefox icon in my toolbar now has a circle with a line through it top (cancelled). I hope someone can explain what I need to do to be able to use Firefox once more. Thank you, TC

  As you have a PPC or Power Mac the last form of waiver Mozilla to work on the PPC is Firefox 3.6. *

  3.6.23 Firefox can be found at http://www.mozilla.com/en-US/firefox/all-older.html

  Since you have a PPC Mac, there is this option of third-party for Firefox 7.0.1
  http://www.floodgap.com/software/tenfourfox/

  From Firefox 4.0, a Mac Intel with OS x 10.5 + is required for versions of Mozilla's Firefox. http://www.Mozilla.org/en-us/Firefox/7.0.1/system-requirements/

• Said updated stand-alone Windows Setup program do not apply to this system.

  I tried to download and reinstall the stand-alone windows installer, but get the message that no update available for this system or this download does not apply to this system.  Standalone Installer, I think it's a system XP instead of Vista Home Premium 32 bits of the system. How can I uninstall the stand-alone Windows Installer and install one for Vista?   Is it important that I have a desktop computer that has XP on it?  I also rename the laptop with the Vista program to my name. Is it relevant. I tried to reverse the name

  Hi Rockyakauke25,
   
  Welcome to Microsoft answers community forum!

  This day stanalone you trying to install?

  Try to install the update in safe mode.

  Try to install the update in safe mode and see if you are able to install. Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  To start in safe mode, follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2   , do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  Install the prerequisite updates before applying a new update that is installed sp 1 for a successful installation sp 2.

  See the link for download of SP1 and installation

  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Try to run the system update readiness tool before installing the SP1 or SP2.
   
  The system update tool:
  http://support.Microsoft.com/default.aspx/KB/947821
   
  A software update is available for the Windows Vista installation:
  http://support.Microsoft.com/kb/937287
   
  Then download and install Service Pack 2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
   
  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• After installing the updates, event viewer says "Some of the updates are not applicable for this system"

  I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

  Hi Simply4real,

  Check out the link below to a thread with similar problem and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.