ORA-60019 on installation

Similar Questions

• Unable to connect, ORA-12154, the installation routine to find ODBC Microsoft errors

  Hi all
  
  I have a 64-bit Windows 7 Enterprise SP1 system and I wanted to be able to connect to an oracle database server. However, I am facing a problem with the ODBC configuration.
  
  I currently installed both below in... product\11.2.0\client_1 folder:
  1 oracle Database 11 g Release 2 (11.2.0.1.0) Client for Microsoft Windows (x 64) - http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
  2 64 - bit components (ODAC) data access Oracle - http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
  
  I launched the ODBC data sources administrator and added a user DSN but gave rise to two errors:
  1. the Setup for the Microsoft ODBC driver ODBC routines oracle is not found. Please you reintall the pilot.
  2. the specified DSN contains a mismatch of architecture between the driver and the application.
  
  In addition to that, if I go to the system DSN tab and tried to test the connection it gives me an error:
  1. cannot connect SQLState = 08004 [Oracle] [ODBC] [Ora] ORA-12154: TNS: can not solved the specified identifier.
  
  Anyone can guide me please thanks to this? Thanks in advance!
  
  Published by: VTech on February 26, 2013 14:13

  VTech wrote:
  Hi all

  I have a 64-bit Windows 7 Enterprise SP1 system and I wanted to be able to connect to an oracle database server. However, I am facing a problem with the ODBC configuration.

  I currently installed both below in... product\11.2.0\client_1 folder:
  1 oracle Database 11 g Release 2 (11.2.0.1.0) Client for Microsoft Windows (x 64) - http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
  2 64 - bit components (ODAC) Oracle data access - http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html

  It is enough that one of them (the other should be enough).

  I launched the ODBC data sources administrator and added a user DSN but gave rise to two errors:
  1. the Setup for the Microsoft ODBC driver ODBC routines oracle is not found. Please you reintall the pilot.

  "Microsoft ODBC for Oracle" is a different provider than 'Oracle ODBC'. Make sure that you do not use Microsoft one.

  2. the specified DSN contains a mismatch of architecture between the driver and the application.

  This can happen if you mix 32-bit and 64-bit. There are two ODBC Control Panel in Windows 7:
  -64-bit, one is that of the Panel
  -the 32 bit one is c:\windows\syswow64\odbcad32.exe

  Because you use an Oracle 64-bit driver, you must use the 64-bit ODBC Administrator and 64-bit applications. If you try to use this ODBC connection with a 32-bit application, you will need to use the 32-bit ODBC (and the driver Oracle 32-bit).

  In addition to that, if I go to the system DSN tab and tried to test the connection it gives me an error:
  1. cannot connect SQLState = 08004 [Oracle] [ODBC] [Ora] ORA-12154: TNS: can not solved the specified identifier.

  Well it actually means that it loads correctly, Oracle is something. You must add an entry for the server you want to connect in tnsnames.ora, located in the folder \network\admin inside your Oracle client installation. Because it looks like someone else set up the server that you want to connect, your DBA should be able to provide the information that is written to the file.

• ORA-12012: error on auto work "SYSMAN." "' EM_ECM_VCPU_JOB ' in the repository database

  Hello

  I want to install Oracle EM 12 c Cloud Control version 12.1.0.3. I watched the video and I'm just following the instructions.

  I created a repository database using a model of database I downloaded from OTN (database version 11.2.0.3). I chose the data base for the deployment of small.

  Once the repository database has been created, the following error keeps repeating in the database's alert.log file:

  ORA-12012: error on auto work "SYSMAN." "" EM_ECM_VCPU_JOB ".

  ORA-00942: table or view does not exist

  ORA-06512: at "SYSMAN.". EM_ECM_VCPU_COLLECTION', line 1432

  ORA-06512: at line 1

  The installation of the CMS software has not been started.

  In my view, there is a support Note 1570105.1 of ID that addresses the same error in the desk of cloud and is addressed by the application of a patch in the OMS_HOME.

  Someone can help me please answer:

  1) is the question that I feel exactly the same way as in the notes 1570105.1?

  (2) do I proceed with the installation of the WHO and then apply the patch, or is there a way to stop it now, before we continue?

  (3) will be OK to disable just the job in question?

  I think I saw somewhere that the SYSMAN schema should not even be present in the repository database before installation of the WHO; However, this is how he got from the database model.

  Thanks a lot for your help.

  Emilija

  Indeed the footnote you found is good:

  EM 12 c R3: running the reports EM_ECM_VCPU_JOB: ORA-12012: error on auto work "SYSMAN." "" EM_ECM_VCPU_JOB "(Doc ID 1570105.1)

  However, I think it can only occur after the installation of the (12.1.0.3) WHO is an active work that has to do with the VT plugin (to manage and monitor Oracle VM) even if you have not installed this plugin.

  Ora errors after installation of the patch.

  If you do not want to stop the SGD just to install the patch, you can also run the 17066821\17066821\files\sysman\admin\emdrep\sql\core\latest\ecm\ecm_vcpu_computation_pkgbody.sql as user sysman.

  This will recreate the package but now without calling the task if you do not have the plugin installed VT.

  Eric

• OID / LDAP configuration steps

  10204 on AIX version
  I need the LDAP.ora OID of installation for the 1st time, need help...
  
  Here are the steps that I intend, do me right if I'm not...
  
  1. configure the new db
  2 Configure OID on new db to next
  http://www.Oracle-base.com/articles/9i/OracleInternetDirectory9i.php
  3 configure the management of network entry ldap.ora & dbs with netmanager
  
  ---------------------------------------------------------------------------------------------------------
  
  2nd I'm trying to invoke oidca just to test how it works, please give me example of syntax for oidca, as
  
  $ORACLE_HOME/bin/oidca oidhost = myhost = dn? mode =?

  What version of Oracle Identity Management you trying to install?

  Anyway, please follow the instructions in Metalink Note 564174.1 Oracle Application Server 10 g (10.1.2) requirements for Linux: OEL 5 and RHEL 5

• The 11g R2 RAC installation issue: ORA-00304: requested INSTANCE_NUMBER is busy

  Hi guys...

  
  There are 4 servers, 2 are next to primary and remaining 2 servers are on the primary side. With the installation of RAC 2 nodes using ASM.
  Here are the names
  LOC1DB1

  LOC1DB2

  LOC2DB1

  LOC2DB2

  After the installation of grid and the database, I made the following changes:

  • State of the cluster enabled using the command
    • crsctl State resource t //and the exit is 'open' for both the database.
  • Switch to the oracle user
  • Connect to sql
    • sqlplus sys / [email protected]:1521 / xxx as sysdba //starts successfully with this message "with the Real Application Clusters and automatic storage management options:
    • immediate stop
  • Connect to sql
    • sqlplus / as sysdba //connected successfully with the message "sqlplus / as sysdba.
    • startup

  He invites an error 'ORA-29760: instance_number parameter not specified not'.»» So I added a line "instance_number = 3"to the file 'initORCL.ora' in a new fast error on LOC1DB2 and LOC2DB2 servers but all servers after I could so that it starts properly on LOC1DB1 and LOC2DB1 it is to say"ORA-00304: requested INSTANCE_NUMBER is busy'." " so please help what to do now. I changed the instance number several times but his does not work.

  > So I added a line "instance_number = 3"to the file 'initORCL.ora' in a new fast error on LOC1DB2 and LOC2DB2 servers but all servers after I could so that it starts properly on LOC1DB1 and LOC2DB1 it is to say"ORA-00304: requested INSTANCE_NUMBER is busy'." " s

  Your database has a name, lets call him ORCL. Oracle RAC, each instance will have a different name that is the concatenated with the INSTANCE_NUMBER DB_NAME. If node 1 will be instance ORCL1 and node 2 will ORCL2 instance. Your instance in the settings file number must also be set for each instance. If the parameters could look like:

  orcl1.instance_number = 1

  orcl1.instance_number = 2

  What you were doing was this:

  * .instance_number = 3

  Who tries to assign the number 3 of the instance to all instances. This is incorrect, as you discovered. First start with this number very well. The second instance tries first number but the number of the instance is already used, where the error ORA-304.

  In addition, you should not use the initORCL.ora. In fact, in 11.2, you use a SPFILE shared for Oracle RAC. A settings file to be used by all instances of the database.

  > sqlplus / as sysdba //connected successfully with the message "sqlplus / as sysdba.

  > start

  You do not use SQL * Plus to start/stop a database Oracle RAC. You use the srvctl utility.

  srvctl start database-d db_name

  srvctl stop database db_name immediate o d

  See you soon,.
  Brian

• ORA-942 from the page of connection details of OEM 12 c installation during 2-system upgrade database

  Hello

  I am trying to improve our 11.1.0.1 to 12.1.0.3 OEM production using the method 2-system.  When I try to keep in the database connection Details page after you have specified the connection details for the copy of the deposit on the new host, this error pops up:

  ERROR: ORA-00942: table or view does not exist

  Unable to connect to the database and validate is a database supported due to one of the following reasons:

  (1) credentials incorrect

  (2) the auditor may be out of service

  (3) database is perhaps out of service.

  Check the credentials, the status of the listener and the database, and then try again.

  This error is not moved when we used the same procedure to upgrade a test installation 11.1.0.1.  In addition, I tried to change the connection details to connect to the repository of original production and got the same error.  This seems to indicate that the problem is specific to this repository.

  I'm Tournai on sql trace for another chance and found this error in the trace file:

  The following statement has encountered an error during the analysis:

  "Select count (1) in the mgmt_targets where target_type = 'host' and target_name ='oem12c.gfcsap.com"

  Encountered error: ORA-00942

  This error is meaningless to me that mgmt_targets is present in the sysman schema.

  Any suggestions on how to move beyond this would be appreciated.

  Dave

  Hi all

  While explaining the issue to a colleague, it dawned on me that I had not thought sys could be running the query instead of sysman, in which case a synonym would be necessary.  I checked the test repository, and it had a public synonym for sysman.mgmt_targets.  The production repository was missing the synonym.  After you create the synonym in the repository of the production, I passed this stage.

  Dave

• ORA-65096 installation Oracle 12cR1 example diagrams

  Hello

  Database: 12cR1, 12.0.1.0, x 64

  System: Oracle Linux 6.4, x 64

  I installed a database simple starter during the installation of Oracle 12cR1 database with the PDBORCL option enabled (default) and would like to install the Oracle example, such as the HR schema users, data etc. According to http://docs.Oracle.com/CD/E16655_01/server.121/e15979/installation.htm#I4367

  @?/demo/schema/human_resources/hr_main.sql

  CREATE USER IDENTIFIED BY hr hr

  *

  ERROR on line 1:

  ORA-65096: of invalid common name of the user or role

  Maybe the scripts were not designed for container and plug-able data. I did the following:

  ALTER database connectable to open pdborcl;

  change the container set session = PDBORCL;

  @?/demo/schema/human_resources/hr_main.sql

  Modified user.

  Grant succeeded.

  Grant succeeded.

  Connected.

  GRANT execute ON sys.dbms_stats TO hr

  *

  ERROR on line 1:

  ORA-01917: there is no user or role 'HR'

  I could probably create a regular database, but I wonder if there is another option without having to change the configuration scripts.

  Thank you!

  Hello

  You can just set the TWO_TASK environment variable before setting up your example of schema.

  For ex:

  Export TWO_TASK = PDBORCL

  sqlplus sys/passwd@PDBORCL as sysdba

  @?/demo/schema/human_resources/hr_main.sql

  Indeed, when TWO_TASK is defined, the default client connection uses TNS and alias in your tnsnames.ora instead of the local connection and ORACLE_SID.

  "The TWO_TASK (on UNIX) or LOCAL (Windows) environment variable can be on a login. "This removes the need to explicitly enter the connection identifier when a connection is made in SQL * more"

  http://docs.Oracle.com/CD/E16655_01/server.121/e18404/APD.htm

  Kind regards

  Alex

• Oracle Database 11 g installation problem: ORA - 12560:TNS: Protocol adapter error.

  People,

  Hello. Initially, my Windows XP host name is 'localhost' and IP 127.0.0.1.

  I installed Oracle Database 11 g with Windows XP successfully and all customers in the database with the database instance running.

  For some reason, I uninstalled all of the database server and remove the whole installation directory /oracle.

  I have configured the address IP of Windows XP in 192.168.196.101 to ping other machines.

  For my needs, I installed Oracle Database 11 g with Windows XP again. During step 7 of 8: Oracle Database Configuration Assistant, I got this error:

  ORA - 12560:TNS: Protocol adapter error.

  I click on the button "Password management", there is no line in this window (no user name, no account of the lock).

  I have check the listener as below:

  C:\ > lsnrctl
  LSNRCTL > start
  His output: earphone HEADSET name has already been started.
  LSNRCTL > status
  Its release:... Service DB1 has 1 instance. The instance BD1 ready state. The command completed successfully.

  I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is:

  Listen [0] = LISTENER address = (ADDRESS = (PROTOCOL = TCP (port = 1522))(HOST=localhost))

  I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below

  HOST = localhost port = 1522

  I think that HOST = localhost and port = 1522 is the cause of the ORA-12560 error because Windows XP was configured in HOST = 192.168.196.101.

  But I do not understand how to solve this problem.

  Can any folk tell me how to solve this problem? must cancel the installation of 8 on step 7 and install it again?

  
  Thank you.

  > The problem is that I am installing Oracle Database 11 g with Windows XP

  Why? above is NOT a supported combination.

  What makes you think that it should work without error?

• ORA-1450 during the installation of the repository

  I tried to use the MISP utility on a 10.2.0.4.4 database on Red Hat Enterprise Linux Server release 5.7 (Tikanga) 2.6.18 274.7.1.el5 (64-bit). I got the below error when you try to create the repository. Anyone else has come across this or have no work around for it? The plan is to update this database to 11.2.0.3 on new hardware. It will go to AL32UTF8 WE8ISO8859P1 in the process.
  Thank you
  Brian
  
  
  29.13:56:32:529; P035; S; 10042 encountered an error during the installation of the repository: error occurred during batch processing: ORA-01450: maximum (3118) key length exceeded
  
  29.13:56:32:531; P035; S; 10008 cannot install the repository.
  29.13:56:33:211; P035; I; 10016 uninstalled repository.

  The MISP repository requires a tablespace with block size of 8 k or higher. Please, try the following for MISP 1.1:

  (1) create a tablespace with block size 8 k
  (2) change the default tablespace for the user of the SYSTEM to use this new space of tables
  (3) install the MISP repository on a new basis
  4) reset the user of the SYSTEM to use the original table space

• Post installation problems, ORA-00205: error in control identiying files

  Dear all,
  
  On a new installation on Oracle Enterprise Linux 5.3 64-bit, I installed Oracle 11 g 1 64-Bit material. There was not a single error during installation. But DB has not been started.
  
  When I tried to start the DB, it gives the following error:
  
  ORA-00205: error in the identification of control files.
  
  I edited the init.ora file:
  
  control_files = (/ opt/app/oracle/oradata/bsserp/control01.ctl, opt/app/oracle/oradata/bsserp/control02.ctl, opt/app/oracle/oradata/bsserp/control03.ctl)
  
  But the error remains the same. I even recreated the PB but his will not change.
  
  Kindly help on that.
  
  Best regards, Imran

  misterimran wrote:
  It seems that the compatible thing worked, but now the error changed to:

  ORA-01103: name of the database "BSSERP" in the control file is not "DEFAULT".

  Can I modify the control file to change the database name. Because the database is not in a State of mounting I can't question the name of database to help:

  SELECT database name $ v the folder name is BSSERP.

  You need to replace BSSERP DB_NAME parameter (but actually it's DEFAULT), and then restart the database.

• role of the listener.ora in a single installation of Oracle client?

  What is the role of listener.ora in a single installation of Oracle client? In scenarios that I can use?
  Thank you
  Smith

  Listener.ora is not used on the client

• Healthcare of Adapter Installation SQLException error: ORA-00942

  Hello

  While trying to install healthcare SOA in the environment of Windows, ORA-00942 error development.

  does anyone know what measures is not installed correctly?

  Thank you verymuch!

  Oracle_SOA1\bin > Ant, Ant - f-soahc - postinstall.xm

  createView:

  replaceSqlScript:

  [sql] Execution of resources: C:\Oracle\Middleware\Oracle_SOA1\soa\thirdparty\healthcare\b2b_mv.sql

  [sql] Cannot run: CREATE MATERIALIZED VIEW LOG ON b2b_business_message WITH ROWID, SEQUENCE (ext_business_message, channel_name, say

  ction, created, native_msg_size, doctype_name, doc_protocol_version, doc_protocol_name) including the NEW VALUES

  BUILD FAILED

  C:\Oracle\Middleware\Oracle_SOA1\bin\ant-soahc-postinstall.XML:92: The following error occurred during the execution of this line:

  C:\Oracle\Middleware\Oracle_SOA1\bin\ant-soahc-postinstall.XML:314: java.sql.SQLSyntaxErrorException: ORA-00942: Table or view does not exist

  I solved this problem, here is the right configuration, the wrong selection of SOA scheme Username will lead to be the above error.

  setProps:

  [entry] Enter wls - username: [weblogic]

  WebLogic

  [entry] Enter wls - password:

  [entry] Enter wls - hostname: [localhost]

  localhost

  [entry] Enter wls-admin-port: [7001]

  7001

  [entry] Enter the wls managed port: [8001]

  8001

  [entry] Enter wls-admin-server-name: [AdminServer]

  AdminServer

  [entry] Enter wls-managed - server name: [soa_server1]

  soa_server1

  [entry] Enter wls-platform. Enter one of the following numbers: ([linux64] linux32)

  , win64, win32, ia64-HP-UX, solaris-sparc32, sparc64 solaris, aix-powerpc64, sola

  LAUGH - ix86_64)

  Win32

  [entry] Enter the type of db: ([oracle], oracleEbr)

  Oracle

  [entry] Enter the db url: [jdbc:oracle:thin:@localhost:1521:orcl]

  JDBC:Oracle:thin:@localhost:1521:ORCL

  [entry] Enter user name of schema SOA:

  DEV_SOAINFRA

  [entry] Enter password schema SOA:

  ORCL

• Error with the installation of DG - ORA-16025: parameter LOG_ARCHIVE_DEST_2 contains repeated or conflicting attributes

  Hello

  I'm trying to define DG on Linux for Oracle

  VM DATAGUARD1 - TEST (PRIM)

  VM DATAFUARD2 - TESTDG (STBY)

  I try startup nomount stby db using the setup initialization file, but I get the error below. Please notify.

  SQL > startup nomount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initTESTDG.ora';

  ORA-16025: parameter LOG_ARCHIVE_DEST_2 contains repeated or conflicting attributes

  SQL >

  initTESTDG.ora-

  TESTDG.__db_cache_size = 486539264

  TESTDG.__java_pool_size = 16777216

  TESTDG.__large_pool_size = 33554432

  TESTDG.__oracle_base='/U01/app/oracle'#ORACLE_BASE the value of the environment

  TESTDG.__pga_aggregate_target = 788529152

  TESTDG.__sga_target = 872415232

  TESTDG.__shared_io_pool_size = 0

  TESTDG.__shared_pool_size = 285212672

  TESTDG.__streams_pool_size = 33554432

  *.audit_file_dest='/U01/app/Oracle/admin/TESTDG/adump '

  * .audit_trail = "db".

  * full = '11.2.0.4.0'

  *.control_files='/U01/oradata/TESTDG/control01.ctl','/u02/oradata/TESTDG/control02.ctl','/u03/oradata/TESTDG/control03.CTL '

  * .db_block_size = 16384

  *. db_domain ='GEOPLACE.CO. UK'

  *.db_file_name_convert='/U02/oradata/test/','/U02/oradata/TESTDG /'

  *.log_file_name_convert='/U01/oradata/test/','/U01/oradata/TESTDG/','/U02/oradata/test/','/U02/oradata/TESTDG','/U03/oradata/test/','/U03/oradata/TESTDG /'

  * .db_name = 'TEST '.

  * .db_unique_name = "TESTDG.

  *.diagnostic_dest='/U01/app/Oracle '

  *. Dispatchers ='(Protocol=TCP) (SERVICE = TESTDGXDB)"

  * .fal_client = "TESTDG.

  * .fal_server = 'TEST '.

  * .log_archive_config = 'DG_CONFIG = (TEST, TESTDG)'

  *. Log_archive_dest_1 ='LOCATION = / mnt/nfstest/DATAGUARD1 / VALID_FOR =(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME = TESTDG'

  * .log_archive_dest_2 = "SERVICE = ASYNC LGRW VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME TEST = TEST'"

  * .log_archive_dest_state_2 = 'REPORTER '.

  * .log_archive_dest_state_1 = enable

  *.log_archive_format='%t_%s_%r.arc'

  * .log_archive_max_processes = 30

  * .memory_target = 1656750080

  * .nls_language = "ENGLISH".

  * .nls_territory = "UK".

  * .open_cursors = 300

  * runoff = 150

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace ='UNDOTBS1

  * .log_archive_dest_2 = "SERVICE = ASYNC LGRW VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME TEST = TEST'"

  There are typo to redo transport "LGRW", it should be "LGWR", remaining quite seems perfect.

• Values recommended for installation of PROD init.ora

  Hi all
  

  -Assuming that I am using a 64-bit version of Oracle, 
  -that there is nothing else running on the server, 
  -that there will be no other databases on the server, 
  -that I have substantially more data on disk than I have RAM, 
  -and that I am using 11g. 

  I want to put in place an 11g database. The specifications of the server is OEL 5.6 with 12 GB of Ram and a Quad Core processor.
  There will be 200 users simultaneously access the database. I understand that 10g and 11g are 'auto adjustment '.
  So in this respect that I still have to change the values in the default init.ora?
  
  Can you give me example of your init.ora PROD template?
  
  Or maybe since my RAM is 12 GB, I put just the 'target LMS = 8 GB' and the database will be good?
  
  
  Thank you
  
  YX
  
  Edited by: yxes2013 the 8.2.2013 16:21
  
  Addition of the assumptions of Justin

  Important parameters in the production will be

  AUTO TUNE MEMORY_TARGET SGA AND PGA

  will be better take notice of v$ pga_target_Advice, v$ sga_target_Advice, v$ memory_target_Advice

  This will help you you also for memory management http://docs.oracle.com/cd/B28359_01/server.111/b28310/memory003.htm

  SESSION_CACHED_CURSORS

  Oracle monitors the SQL statements that are submitted for each session. If it detects that the same statement has been presented several times, it moves of the statement in the cursor cache and leaves the cursor open for future reuse. The parameter SESSION_CACHED_CURSORS controls the number of cursors allowed in the cursor cache.

  The default value for SESSION_CACHED_CURSORS varies with the release of Oracle. If your instance is not configured to cache at least 50 sliders, increase the value of this parameter to 50.

  OPEN_CURSORS

  The Oracle OPEN_CURSORS initialization parameter specifies that the number of cursors a session can have open at any time. The default value is 300. If the session is trying to open a new cursor, but already the number maximum open cursors, the error Oracle-1000 will be returned.

  Parameter that affects the Oracle statistics

  OPTIMIZER_MODE keep the default value for the parameter Oracle OPTIMIZER_MODE. For Oracle9i, the default is to choose; for Oracle 10 g, it is all_rows.

  The RAM management

  PGA_AGGREGATE_TARGET

  SGA_TARGET

  ALSO UNDO_RETENTION VA BE IMPORTANT SEE http://docs.oracle.com/cd/B19306_01/server.102/b14237/initparams222.htm

  Published by: Karan on February 8, 2013 10:50

• New installation of XE on Linux 5 - ORA-01017 connection error

  This is an image of Linux VM on Win 7.
  The listener is in place and the database seems to be upward.
  I, ' su - oracle ' and the various env vars are defined.
  I installed the groupid and oracle is a member of them.
  I also made one, "ssh systemname", in order to verify the login passwd file.
  Oracle is in the file of sudo.
  I uninstalled and installed several times.
  Reboot the kernel image Linux seems to start to Oracle and the TNS listener.
  I tried sqlplus connection with oracle, sys, system as sysdba. I checked my group id and it contains: oracle, dba, oper, oinstall.
  The files have all 755 and owned by oracle: dba.
  I searched all over the web and I was not able to find anything that helps.
  Any help would be great!
  
  If I,
  sqlplus/nolog
  Conn sys/passwd@xe
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  ----
  sqlplus / as sysdba
  ERROR:
  ORA-01031: insufficient privileges
  
  Edited by: 982515 January 17, 2013 09:39

  Hi Tom,

  uniq-d will be only taken as of the values that are adjacent, but not if they are separated by an another value (s).

  That's right, thanks for pointing that out! I took the wrong line of my history of the shell. The last command I tested with resembled

  cut -f1 /etc/group -d ":" | sort | uniq -d
  

  and of course, you could grep for dba, but I think you should check all entries of group duplicates.

  -Udo

  P. S.: thank you for tagging messages! It should be possible to remove the useful marker, but I'm not sure that it (still) works since the last update the forum software. Of course, you can use this message with the chain set for checking for duplicates.