Post installation problems, ORA-00205: error in control identiying files

Dear all,

On a new installation on Oracle Enterprise Linux 5.3 64-bit, I installed Oracle 11 g 1 64-Bit material. There was not a single error during installation. But DB has not been started.

When I tried to start the DB, it gives the following error:

ORA-00205: error in the identification of control files.

I edited the init.ora file:

control_files = (/ opt/app/oracle/oradata/bsserp/control01.ctl, opt/app/oracle/oradata/bsserp/control02.ctl, opt/app/oracle/oradata/bsserp/control03.ctl)

But the error remains the same. I even recreated the PB but his will not change.

Kindly help on that.

Best regards, Imran

misterimran wrote:
It seems that the compatible thing worked, but now the error changed to:

ORA-01103: name of the database "BSSERP" in the control file is not "DEFAULT".

Can I modify the control file to change the database name. Because the database is not in a State of mounting I can't question the name of database to help:

SELECT database name $ v the folder name is BSSERP.

You need to replace BSSERP DB_NAME parameter (but actually it's DEFAULT), and then restart the database.

Tags: Database

Similar Questions

DB not starting not due ORA-00205: error in the identification of 11GRAC control file

Hello
I have it configured in the OEL5 11 g RAC (11.2.0.1.0). When I tried to start the database using the command srvctl or by manually I get the below error. \
RPRC-1079: failed to start of ora.rac.db resources
ORA-00205: error in the identification of control files, see log alerts for more information
CRS-2674: beginning of 'ora.rac.db', 'ractwo' failed
CRS-2632: there is no more servers to try to place the "ora.rac.db" resource on which will achieve its investment policy
ORA-00205: error in the identification of control files, see log alerts for more information
CRS-2674: beginning of 'ora.rac.db', 'racone' failed
The content of the alert below log.
ORA-00210: could not open the specified control file
ORA-00202: control file: "+ RACDG/rac/controlfiles/control02.ctl".
ORA-17503: ksfdopn:2 could not open the file +RACDG/rac/controlfiles/control02.ctl
ORA-15001: diskgroup 'RACDG' does not exist or is not mounted
ORA-15055: unable to connect to the ASM instance
ORA-27140: attach to post/wait installation failed
ORA-27300: OS dependent operating system: invalid_egid failed with status: 1
ORA-27301: OS Error Message: operation not permitted
ORA-27302: an error occurred at: skgpwinit6
ORA-27303: additional information: current startup egid = 500 (oinstall), egid = 503 (asmadmin)
ORA-00210: could not open the specified control file
ORA-00202: control file: "+ RACDG/rac/controlfiles/control01.ctl".
ORA-17503: ksfdopn:2 could not open the file +RACDG/rac/controlfiles/control01.ctl
ORA-15001: diskgroup 'RACDG' does not exist or is not mounted
ORA-15055: unable to connect to the ASM instance
ORA-27140: attach to post/wait installation failed
ORA-27300: OS dependent operating system: invalid_egid failed with status: 1
ORA-27301: OS Error Message: operation not permitted
ORA-27302: an error occurred at: skgpwinit6
ORA-27303: additional information: current startup egid = 500 (oinstall), egid = 503 (asmadmin)
But my ASM instance is running and I am able to see the controlfiles.
State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block
EXTERN MOUNTED N 512 4096 1048576 20472 13772 0 13772 0 N RACDG.
I don't know is there any problem of perission. Oracle cluster and DB is running as user 'oracle '.
Nobody does face this problem before? Let me know where to check this error.
Kind regards
007

Hello

Check "the correct permission must be" - rwsr - s - x '.»»»

Stop the CRS.
Change the permissions of the file to GI_HOME/bin/oracle for "- rwsr - s - x":

$su - grid
$cd GI_HOME/bin
$chmod 6751 oracle
Oracle-l $ls

Start the /CRS.

Start your database.

Thank you

Sundar

ORA-00205: error in the identification of control files, see log alerts for more information

Hello
I'm putting it on oracle 11.2.0.1 to 11.2.0.3 DB level but during DBUA, I got error
"ORA-00205: error in the identification of control files, check the log of alerts for more information.

I have check the alerts log in E:\app\kmahalingam\diag\rdbms\orcl\orcl\trace\alert_orcl.txt
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SNA system picked latch-free 3
With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
Autotune undo retention is enabled.
IMODE = BR
ILAT = 51
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With the options of partitioning, OLAP, Data Mining and Real Application Testing.
Windows NT Version V6.1 Service Pack 1
UC: 8 - type 8664, 8 physical cores
Process affinity: 0 x 0 x 0000000000000000
Memory (success/Total): Ph: 3241 M / 16383 M, Ph + FCP: 16565 M / 32765 M
Using parameters in spfile E:\APP\KMAHALINGAM\PRODUCT\11.2.0\DBHOME_2\DATABASE\SPFILEORCL server-side. ORA
Parameters of the system with default values:
process = 300
sessions = 472
memory_target = 3280M
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
db_recovery_file_dest = 'E:\app\kmahalingam\flash_recovery_area. '
db_recovery_file_dest_size = 3912M
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = "cpg.com."
dispatchers = "(PROTOCOL=TCP) (SERVICE = orclXDB)" "
audit_file_dest = "E:\APP\KMAHALINGAM\ADMIN\ORCL\ADUMP".
AUDIT_TRAIL = 'NONE '.
db_name = "orcl".
open_cursors = 300
star_transformation_enabled = 'TRUE '.
diagnostic_dest = "E:\APP\KMAHALINGAM".
Fri Mar 07 00:33:15 2014
PMON started with pid = 2, OS id = 25072
Fri Mar 07 00:33:15 2014
PSP0 started with pid = 3, OS id = 25688
Fri Mar 07 00:33:16 2014
VKTM started with pid = 4, OS id = 27608 high priority
VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms
Fri Mar 07 00:33:16 2014
GEN0 started with pid = 5, OS id = 11484
Fri Mar 07 00:33:16 2014
DIAG started with pid = 6, OS id = 16980
Fri Mar 07 00:33:16 2014
DBRM started with pid = 7, OS id = 2200
Fri Mar 07 00:33:16 2014
DIA0 started with pid = 8, OS id = 8024
Fri Mar 07 00:33:16 2014
MA started with pid = 9, OS id = 15688
Fri Mar 07 00:33:16 2014
DBW0 started with pid = 10, OS id = 19908
Fri Mar 07 00:33:16 2014
LGWR started with pid = 11, OS id = 22616
Fri Mar 07 00:33:16 2014
CKPT started with pid = 12, OS id = 12828
Fri Mar 07 00:33:16 2014
SMON started with pid = 13, OS id = 10184
Fri Mar 07 00:33:16 2014
RECCE has started with pid = 14, OS id = 28984
Fri Mar 07 00:33:16 2014
MMON started with pid = 15, OS id = 22288
Fri Mar 07 00:33:16 2014
MMNL started with pid = 16, OS id = 12072
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = E:\app\kmahalingam
Fri Mar 07 00:33:16 2014
ALTER DATABASE MOUNT
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:34:46 2014
ALTER DATABASE MOUNT
Fri Mar 07 00:34:46 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:45:51 2014
change the database editing
Fri Mar 07 00:45:51 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:48:13 2014
change the database editing
Fri Mar 07 00:48:13 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:52:34 2014
Derives from detected time. Check the file path VKTM for more details.
Fri Mar 07 00:53:46 2014
Closure of proceedings (immediate)
Closure of proceedings: in addition to logons disabled
Stop background MMNL process
MMON background process stop
The high waters = 1 license
All dispatchers/dispatchers and shared servers stop
ALTER DATABASE CLOSE NORMAL
ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
Fri Mar 07 00:53:49 2014
Stop background VKTM process
Fri Mar 07 00:53:51 2014
Instance shutdown complete
Fri Mar 07 00:54:01, 2014
Setting the default value of the parameter parallel_max_servers
320 to 285 because of the value of the process parameters (300)
Help, please
Thank you

According to spfile.

control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.

control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.

You mentioned

Davinapochon wrote:

E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL02. CTL file is there but there is no CONTROL01. CTL file.

So little confused here.

E:\APP\KMAHALINGAM\ORADATA\ORCL\--> must contain CONTROL01. CTL

E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\--> must contain CONTROL02. CTL

What is it now?

Anand

upgrading startup ORA-00205: error in the identification of control files
Hello
I do a manual upgrade of 10.2.04 to 11.2.03.

I installed 11.2.0.3.
Ran utlu112i.sql
Copied TNSNAMES and LISTENER.ora, init.ora of 10g of House to the respective directories in 11g.
A commented all the dump_dest paramteres in init.ora 11g and added the diagnostic_dest parameter

exports all varaiables as follows.

Export ORACLE_HOME = / oracle/ora11203
export PATH = $ORACLE_HOME/bin: $PATH
export ORACLE_SID = OMIGTEST
Export TNS_ADMIN = $ORACLE_HOME/network/admin
export ORACLE_BASE = / oracle/ora11203/app/ora11203

Now when I try to start DB of the unix session where all above variables are defined, I get after publication.
```
SQL> startup upgrade
ORACLE instance started.

Total System Global Area 1636892672 bytes
Fixed Size                  2183056 bytes
Variable Size            1090519152 bytes
Database Buffers          536870912 bytes
Redo Buffers                7319552 bytes
ORA-00205: error in identifying control file, check alert log for more info

Alert log says as below.

ORACLE_BASE from environment = /oracle/ora11203/app/ora11203
Thu Aug 23 15:03:36 2012
ALTER DATABASE   MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/oracle/ora11203/dbs/cntrlOMIGTEST.dbf'
ORA-27037: unable to obtain file status
HPUX-ia64 Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE   MOUNT...
```
In init.ora 11 g (which is copied from 10 g), I commented on our path of control file entry.

Well want to help me because I do the upgrade for the first time.

Thank you

Published by: user10698496 on August 24, 2012 02:47
Yes.

BR,
Pinela.

ORA-00205: error in identifying controlfile

Hello everyone,
I have spend 10.2.0.2 to 11.2.0.4, when I start my DB I ora-00205: error in identifying controlfile
SQL > startup pfile = upgrade ' / DISK3/app/oracle/product/11.2.0/db1/dbs/initPROD.ora'
ORA-32006: USER_DUMP_DEST initialization parameter has been deprecated.
ORA-32006: BACKGROUND_DUMP_DEST initialization parameter has been deprecated.
ORA-25138: PLSQL_NATIVE_LIBRARY_DIR initialization parameter has been deprecated
ORA-25138: PLSQL_NATIVE_LIBRARY_SUBDIR_COUNT initialization parameter has been deprecated
ORA-32006: LOG_ARCHIVE_START initialization parameter has been deprecated.
ORACLE instance started.
Total System Global Area 2142679040 bytes
Bytes of size 1365828 fixed
486541500 variable size bytes
1627389952 of database buffers bytes
Redo buffers 27381760 bytes
ORA-00205: error in the identification of control files, see log alerts for more information
SQL > show parameter control_files;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
control_files string DISK11/d01/oracle/PROD/db/apps_st/data/cntrl01.dbf,
/ DISK11/d01/oracle/PROD/db/apps_st/data/cntrl02.dbf,.
/DISK11/D01/Oracle/prod/DB/apps_st/data/cntrl03.dbf
any help

What happened when you checked the log of alerts for more information? What did you find? These files exist? .dbf is a much more commonly associated with a data file - extension doesn't want not to say, he cannot be a control file, but that does not match a naming convention, I have never seen used.

ORA-00205: error in identifying controlfile, see log alerts for more information
Hello

I would like to restore a database to another server

source server: oracle 9.2.0.6.0/solaris

in the destination server, I installed oracle 9.2.0.1 (only software) and applied the Patch Release 2 (9.2.0.6)

I restored all the files data, redolog, controlfiles (cold backup) to the destination server and kept all the files in the required path:

in the destination server:

bash-3. $00 sqlplus "virtue sysdba".

SQL * more: release 9.2.0.6.0 - Production on Mon Oct 13 17:24:48 2008

Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.

Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64 bit Production
With partitioning, OLAP and Oracle Data Mining options
Release 9.2.0.6.0 - Production jserver

SQL > startup nomount pfile='/oracle1/oracle/product/9.2.0/dbs/initvoipdb.ora';
ORACLE instance started.

Total System Global Area 488082184 bytes
Bytes of size 731912 fixed
Variable size 268435456 bytes
218103808 of database buffers bytes
Redo buffers 811008 bytes
SQL > alter the editing of the database;
change the database editing
*
ERROR on line 1:
ORA-00205: error in identifying controlfile, see log alerts for more information

in the alert log file:

change the database editing
Mon 13 Oct 17:28 2008
ORA-00202: controlfile: ' / oracle1/oradata/voipdb/cont
rol03. CTL'
ORA-27037: unable to get file status
SVR4 error: 2: no such file or directory
Additional information: 3
Mon 13 Oct 17:28:03 2008
ORA - 205 scored at the course: change the editing of the database...

That's all that I missed the suggestion is greately appreciated.

Thank you

Prakash

Published by: [email protected] on October 13, 2008 05:09
You can also try your init.ora of edition and leaving only control01.ctl (remove control02.ctl and control03.ctl of the parameter control_files).

Enrique

Oracle Database 11 g installation problem: ORA - 12560:TNS: Protocol adapter error.

People,
Hello. Initially, my Windows XP host name is 'localhost' and IP 127.0.0.1.
I installed Oracle Database 11 g with Windows XP successfully and all customers in the database with the database instance running.
For some reason, I uninstalled all of the database server and remove the whole installation directory /oracle.
I have configured the address IP of Windows XP in 192.168.196.101 to ping other machines.
For my needs, I installed Oracle Database 11 g with Windows XP again. During step 7 of 8: Oracle Database Configuration Assistant, I got this error:
ORA - 12560:TNS: Protocol adapter error.
I click on the button "Password management", there is no line in this window (no user name, no account of the lock).
I have check the listener as below:
C:\ > lsnrctl
LSNRCTL > start
His output: earphone HEADSET name has already been started.
LSNRCTL > status
Its release:... Service DB1 has 1 instance. The instance BD1 ready state. The command completed successfully.
I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is:
Listen [0] = LISTENER address = (ADDRESS = (PROTOCOL = TCP (port = 1522))(HOST=localhost))
I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below
HOST = localhost port = 1522
I think that HOST = localhost and port = 1522 is the cause of the ORA-12560 error because Windows XP was configured in HOST = 192.168.196.101.
But I do not understand how to solve this problem.
Can any folk tell me how to solve this problem? must cancel the installation of 8 on step 7 and install it again?

Thank you.

> The problem is that I am installing Oracle Database 11 g with Windows XP

Why? above is NOT a supported combination.

What makes you think that it should work without error?

I hv with updated installation problem and receive error message-_ "WindowsUpdate_00000646" "WindowsUpdate_dt000" __last 3 days, I get the same error __need help... _

Error message

"WindowsUpdate_00000646" "WindowsUpdate_dt000"

Help me

Once again thank you

Hello

Try this 1st to see if it helps, and it should:

Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/

------------------------------------------------------

If necessary :

Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)

Those who will take you to a page where you can download the update.

Or go here and the KBxxxxxx number to download it.

Download Center - mount the KBxxxxxx.

Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx

Download - SAVE - go to where you put them - click on - RUN AS ADMIN

Then you can right click on the update in the updates Windows and HIDE.

If you get an error Installer install this version:

Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

----------------------------------------------------

Then run this:

How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058

Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821

------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.

Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

Microsoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

------------------------------------------------------------

If necessary you can incident free get reports however the above should take care of it for you.

Windows updates - free Incident report

Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3

The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

boot problems after "disk error-checking/control - automatically fix file system errors.

I ran the two options 'check disk' after deleting some old programs and was prompted to restart. When it restarts it was all white screen, then I stop after waiting a few minutes using the power button. now it won't start at all - I have white screen and cannot even get into safe mode by pressing F8. white screen and the fan runs. I is not original boot CD, so tried a CD recovery Norton but would not start from that. I checked the monitor cables.

It's a 2002 eveshamvale:
Windows XP Home Edition Service Pack 3 (build 2600)
Board: Gigabyte Technology Co., Ltd. 8ID533 1.x
The bus clock: 100 MHz
BIOS: Award Software International, Inc. 6.00 PG 11/11/2002

would be grateful for any ideas.
Thank you

If you used the power switch, you can inadvertently damage your file system, so before wasting time to try a bunch of things, I could do this (or you may be wasting a lot of time to try things too):

The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

These can cause corruption in the file system that must be fixed before you do anything else.

If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do. Or, you are welcome to just start trying things that might work.

Boot into the Recovery Console Windows using an XP bootable installation CD.

If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

This is not the same as recovery disks that may have come to a store to purchase the system.

You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

The ISO bootable image file you need to download is called:

xp_rec_con. ISO

Download the ISO from here:

http://www.mediafire.com/?ueyyzfymmig

Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

http://www.ImgBurn.com/

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.

When you start on the CD, follow the instructions:

Press any key to boot from CD...

Installing Windows... going to pronounce.

Press 'R' to enter the Recovery Console.

Select the installation that you want to access (usually 1: C:\WINDOWS)

You may be asked to enter the password (usually empty).

You should be in the folder C:\WINDOWS. It's the same as the

C:\Windows folder that you see in Solution Explorer.

The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.

Assuming your boot drive is C, run the following command:

CHKDSK C: /r

Let chkdsk finish to correct the problems, he could find.

It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.

You must run chkdsk/r again until it finds no error to correct.

Remove the CD, and then type "exit" to exit the RC and restart the computer.

You have not to set the BIOS to boot the disk HARD since the CD won't be.

Creative installation problem Cloud - 1 error code

I tried to download the installer of creative cloud to use a free trial several times without success. I get an error Code: 1.
None of the solutions on this support page [ error "Unable to install" received when installing Adobe Creative Cloud desktop application ] works for me.
Solution 1 does not apply because this is my initial installation of the creative cloud (I had the creative cloud before but it is completely uninstalled from my computer).
Solution 2: I tried to run the cleanup tool Adobe CC, and while he had run the program once I reach step 10, there is no instructions to know how to find this file in Windows 10 to ensure that the program was successful.
Finally, I tried the solution 3 (creating a new user on my PC), and it has also failed.
I use a HP spectrum x 360 running Windows 10, fully updated to the recent update of the anniversary. I got creative cloud installed on my computer before, but I uninstalled because my PC has problems, shortly after I installed it.
I don't know what else to try, and there is no support number to call me on this subject.
Thanks for any help you can give.

Re: failed to install for cc, error code: 1 - tried all laptop troubleshooting, new and previously installed before doing a system restore...

Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.

Creative cloud support (all creative cloud customer service problems)

http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

HP color laserjet 4500n post installation problem. not print!

I've recently updated to windows7. After installation (using correct drivers from the HP site) my computer is grateful for the printer in my parallel port (correct) but does not send any information to the printer.

It will not print test page for the computer after installation, but impressions direct test of the page of the printer itself. Help please.

Hi cool soul,

The HP Color Laserjet 4500n printer is a printer. I suggest you post in the forum for HP Business Support for a better chance to find a solution.

Here is the link to the Board Commercial Laserjet:

http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

The Vista SP1 installation problems. 0xc0190036 error code

When I try to install SP1 for Vista, I have a code for loop (0xc0190035) restart in GADGET. XML file. I also cannot install security update for Windows Vista - KB938123, which is an update to the gadgets in the sidebar. He get an error code of 8007643. I did all THE procedures in help to include reinstall .NET. I totally uninstalled all the gadgets of my computer in case there's a wrong code or something else in there. I have VISTA Home Premium build 6. It is an OEM copy. I installed KB947821 checks if SP1 is ready to enter into the computer and all right because it will without asking for updates. Can someone help me?

Jim Tinsley,
Here are some steps to start with. First to perform a clean boot on your system. Then, run the following:
Disk error checking
System File Checker

Then Download SP1 and try to install it manually.

Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

' RMAN: ORA-19502: error on the write file.
Hi all

I have an oracle 9.2.0.6, I take primary database backup, my DB is on Sun box and the data file are raw file systems...

But while taking backup I get an error...

I checked on the internet and I got to know that the error occurred because of the space as such catalogue is on win 2003 oracle db catalog House is having 20 GB of space, while I take backup H:\ here I'm not having more than 100 GB of space...

Please help me solve this problem...
```
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ch1 channel at 05/11/2009 13:00:19
ORA-19502: write error on file "H:\mainbackup\bk_inc0_65_1", blockno 269825 (blo
cksize=8192)
ORA-27063: skgfospo: number of bytes read/written is incorrect
Additional information: 131072
Additional information: 1048576
```
The catalog database can be "everywhere". Logically, it makes sense that it is NOT on the same server as the database target.

However, the server on the target database process is one that reads the database files. The server process must connect AS SYSDBA.
See
http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14192/setup003.htm#sthref211

See MetaLink Note # 145843.1 which explains how an RMAN backup of a database on the TARGET computer can write to a drive mounted shared on the network. This is the TARGET database server that must be able to 'see' the shared drive. (The Note covers installation of Windows privileges).
The RMAN Script must specify the mapping that the TARGET server uses for the drive shared as destination drive BackupSet. For example, a database on a Windows Server can write to a drive that is mapped from another Windows Server.

For the database on the Solaris server to write to your disk in Windows, you must use NFS, such as Windows 'export' the reader and Solaris Server "monte" drive with a name of 'local' mapping (for example/MNT) and not a name of windows.

ORA-06502 error writing to PDF file
Oracle 10.1.2.0.8

I'm trying to create a procedure from pl/sql that will dump a bunch of pdf files stored in BLOBs on disk. It runs on a windows machine. In order to avoid line breaks, I use htp.prn.

When I run the following procedure, I get the error:

ORA-06502: PL/SQL: digital or value error: character string buffer too small

If I comment on htp.prn (utl_raw.cast_to_varchar2 (l_buffer)); then the error disappears.

I tried to use smaller buffers sizes but I still get the same error.

Any thoughts are appreciated.

PROCEDURE EXPORT_APNDX_FILES
IS
lv_code NUMBER; -used for the treatment of exceptions
lv_errm VARCHAR2 (64); -used for the treatment of exceptions
lv_err1 VARCHAR2 (120); -used for the treatment of exceptions
lv_err2 VARCHAR2 (120); -used for the treatment of exceptions

l_file UTL_FILE. TYPE_DE_FICHIER;
l_buffer RAW (32767).
l_amount directory: = 32767;
l_pos INTEGER: = 1;
l_blob BLOB;
l_blob_len INTEGER.

BEGIN
-Get LOB locator
SELECT studyapndx_fileobj
IN l_blob
Of er_studyapndx
WHERE rownum = 1; -<-first file is a pdf file

l_blob_len: = DBMS_LOB.getlength (l_blob);

-Open the destination file.
l_file: = UTL_FILE.fopen ("BLOBS", "file.PDF ', 'w', l_amount");

HTP.init;
owa_util.mime_header (' application/pdf');

-Pieces of the BLOB to read and write to the file
-full up.
While l_pos < l_blob_len LOOP
DBMS_LOB. Read (l_blob, l_amount, l_pos, l_buffer);
HTP. PRN (utl_raw.cast_to_varchar2 (l_buffer)); -<-mistake here
l_pos: = l_pos + l_amount;
END LOOP;

-Closes the file.
UTL_FILE.fclose (l_file);

EXCEPTION
WHILE OTHERS THEN
-Close the file if something goes wrong.
IF UTL_FILE.is_open (l_file) THEN
UTL_FILE.fclose (l_file);
END IF;

lv_code: = SQLCODE;
lv_err1: = SUBSTR (SQLERRM, 1, 120);
lv_err2: = SUBSTR (SQLERRM, 121, 240);
DBMS_OUTPUT. Put_line ('Error Code' | lv_code |) ': ' || lv_err1);
DBMS_OUTPUT. Put_line ('Error Code' | lv_code |) ': ' || lv_err2);

END; -Procedure
Change the file mode of text ('w') in binary ("wb") might be enough to allow the put_raw procedure work properly without incorporation of unintentional line breaks. Mode text on a windows machine, file IO routines know that the lines of the text file are completed by a CRLF combination, and it automatically adds the LF when missing essentially converted what he considers an end to end of line CRLF windows line CR style unix style. Binary mode should not do as it possible now that a CR character is not necessarily a line break.

positions 32-bit Vista installation problems
Mr President

I installed newbie.i 10 gr 2 in my vista, but sometimes his departure perfectly and sometimes not. Then I have to restart my machine and then only I get access in sql * plus.i have posted here but the problem is always the same. [post installation problem its not solved still | http://forums.oracle.com/forums/thread.jspa?threadID=930824 & tstart = 0].

When the bellows maintained command isn't leaving no output at all.
```
emctl start dbconsole
```
IN the function panel shows dbconsole status as a server starting at only.

What should do?

concerning
Chrystelle
I do not know I hope that any interpretation (put) the OS environment that you provide. Your best bet is to look at the documentation.

http://www.Oracle.com/pls/db111/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides

Post installation problems, ORA-00205: error in control identiying files

Similar Questions

Maybe you are looking for