Oracle Database 11 g 2 rac on solaris 10 using as storage ACFS and asm
I can't any document step by step to install 11 GR 2 rac on solaris 10.My database is two rac nodes. I use ASM as a storage device. So I need a document that should very easy to understand.
Thanks in advance
Salvation;
I can't any document step by step to install 11 GR 2 rac on solaris 10.
My database is two rac nodes. I use ASM as a storage device. So I need a document that should very easy to understand.
Please find below the doc:
http://download.Oracle.com/docs/CD/E11882_01/install.112/e17214/TOC.htm
Respect of
HELIOS
Tags: Database
Similar Questions
-
Oracle AWR and ADDM report for a multiple instance Oracle database 11 g 2 (RAC)
Hello
How to create an Oracle AWR and ADDM report for a multiple instance (RAC) Oracle database 11 g 2?
Concerning
Hello
Oracle DB 11 g 2 AWR Global report before 11 GR 2, the awrrpt.sql generation
under $ORACLE_HOME/rdbms/admin only generates the report awr for the local instance.
You will need to collect for each RAC instance awr report.
11 GR 2, there are two new scripts awrgrpt.sql AND awrgdrpt.sql for CARS
awrgrpt. SQL - AWR Global report (RAC) (global report)
awrgdrpt. SQL - overall Diff AWR (RAC) report.
Some other important scripts under $ORACLE_HOME/rdbms/admin
spawrrac. SQL - Server Performance RAC report
awrsqrpt. SQL - statement of the standard ANSI SQL92 report
awrddrpt. SQL - period diff on the current instance
awrrpti. SQL - workload repository Instance (RAC) report
REF link:
ADDM enhancements in Oracle Database 11 g & mdash; DatabaseJournal.com
-
Configuration of DNS for the ANALYSIS used with Oracle Database 11g Release 2 RAC
Hi gurus,
I am on how to install oracle RAC 11 g 2, ANALYSIS required for installation, but I do not know how to configure the SCAN with DNS. Have a guide/note/document setup to install DNS configuration for ANALYSIS, can help me to overcome installation CARS with SCAN (single Client access name)
Please don't bother me on my English terible
So thank you
ChThere are a lot of useful documents on the net:
http://www.Oracle.com/technetwork/database/clustering/overview/scan-129069.PDF
http://wiki.Oracle.com/page/Oracle+RAC11g+R2+single+client+access+name-+scan
http://www.garrettseibt.com/database/?p=208
Best regards
Gokhan Atil
-------------------------------------------------------
If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you -
Installation diagram HR in Oracle Database 12 c
Hi, for the life of me I can not the HR schema installed.
With OEL6 and Oracle Database Linux 12.1 c
With the help of the wizard and advanced configuration, I chose to include sample patterns. Everything installed OK. However, none have been installed.
I then downloaded the examples file, unzipped, installed. All right.
Tried to follow: http://docs.oracle.com/cd/E16655_01/server.121/e15979/installation.htm
but also:
But in vain. I still get the same error:
SQL > @?/demo/schema/human_resources/hr_main.sql
Specify the password for HR as a parameter 1:
Enter the value 1: *.
Specify default tablespeace for HR as parameter 2:
Enter the value 2: users
specify the temporary tablespace for HR as parameter 3:
Enter the value 3: temp
Specify the password for SYS as parameter 4:
Enter the value of 4: *.
Specify the path journal as a parameter 5:
Enter the value of 5: @?/demo/schema/human_resources/hr_main.sql
SP2-0606: cannot create the file 'tvtsdb/u01/app/oracle/product/12.0.1/db_1/demo/schema/human_resources/hr_main.sqlhr_main.log' SPOOL
DROP USER CASCADE hr
*
ERROR on line 1:
ORA-01918: user 'HR' does not exist
CREATE USER IDENTIFIED HR BY *.
*
ERROR on line 1:
ORA-65096: of invalid common name of the user or role
ALTER default TABLESPACE users USER HR
*
ERROR on line 1:
ORA-01918: user 'HR' does not exist
TEMPORARY ALTER TABLESPACE temp USER hr
*
ERROR on line 1:
ORA-01918: user 'HR' does not exist
GIVING CREATE SESSION, CREATE VIEW, ALTER SESSION, CREATE the HR SEQUENCE
*
ERROR on line 1:
ORA-01917: there is no user or role 'HR'
GRANT CREATE SYNONYM, CREATE DATABASE LINK, RESOURCE, UNLIMITED TABLESPACE to HR
*
ERROR on line 1:
ORA-01917: there is no user or role 'HR'
ERROR:
ORA-12154: TNS: could not resolve the connect identifier specified
WARNING: You are more connected to ORACLE.
SP2-0640: not connected
ERROR:
ORA-12154: TNS: could not resolve the connect identifier specified
SP2-0640: not connected
SP2-0640: not connected
Creating a table of AREAS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating a table of COUNTRIES...
SP2-0640: not connected
SP2-0640: not connected
Creating a table of LOCATIONS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating the DEPARTMENTS table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating a table JOBS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating an EMPLOYEES table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Create a table JOB_HISTORY...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating an EMP_DETAILS_VIEW view...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Populating the REGION table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill table DESS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill table of LOCATIONS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Filling of the DEPARTMENTS table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
JOBS table populating...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill the EMPLOYEES table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill table JOB_HISTORY...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0641: "EXECUTE" requires the connection to the server
queue is not currently
Can someone tell me please in the right direction?
Took forever (it's really the first time I use Oracle, no knowledge of database), but I finally got it to work, so I'll mention it right here for others to take advantage if all goes well. As I am new, some of these steps might not even be necessary, I'm not sure
Turns, even if I have included diagrams of the sample in the installation, the only installed pattern was the Scott schema. Unfortunately, that was not the HR schema.
You will need to download the examples of schema file and install it.
Then follow step 1 in the following post:
https://community.Oracle.com/message/11234394#11234394
Who said you have to understand an Earphone for your PDB (not the PEH).
So just add another entry for your PDB if you do not already have one in /u01/app/oracle/product/12.1.0/dbhome_1/network/admin/tnsnames.ora #note: directory names different. Mine was too
Important part is the (SERVICE_NAME = pdborcl) or what is called your PDB.
Stop and start the listener:
lsnrctl stop $
lsnrctl start $
Follow step 2 in the same post above to change the script of human resources which should be /u01/app/oracle/product/12.1.0/dbhome_1/demo/schema/human_resources/hr_main.sql
Or, just manually change the following lines in "BOLD". In the following example I changed it to my PDB called pdbtvts:
REM =======================================================
Grants of REM of the sys schema
REM =======================================================
CONNECT sys/&pass_sys@pdbtvts AS SYSDBA;
REM =======================================================
REM create schema hr objects
REM =======================================================
CONNECT hr/&pass@pdbtvts
Then, it is important that YOU do activate HR user having limited SESSION, otherwise you won't be able to connect. This happened to me.
Thus, under where the user hr has permission (over these lines, us has just edit), add the line in bold below:
GIVING CREATE SESSION, CREATE VIEW, ALTER SESSION, CREATE the SEQUENCE at the time;
GRANT CREATE SYNONYM, CREATE DATABASE LINK, RESOURCE, UNLIMITED TABLESPACE to the hour;
GRANT RESTRICTED SESSION on time;
Now, you need to connect to your PDB. Connect as sysdba as usual, which by default connects you to your PIC.
$ sqlplus / as sysdba
You can see that you are connected to your PIC if you issue 'show con_name '.
SQL > show con_name
CON_NAME
------------------------------
CBD$ ROOT
Connect to your PDB by using the following command "connect sys/XXXXX@pdbtvts as sysdba" where XXXXX is your SYS password
You must be connected to your PDB now.
SQL > show con_name
CON_NAME
------------------------------
PDBTVTS
Now, run the script:
SQL > @?/demo/schema/human_resources/hr_main.sql
You will be guests 5 things
1 hr user password - enter a password
2. name of the default tablespace - type "users."
3. temporary with name - type "temp".
4 SYS password - type your real password SYS
5. connect directory - type in "
$ORACLE_HOME
/demo/schema/log/
"If all goes well, you will get:
PL/SQL procedure successfully completed.
Make sure you have things:
SQL > select * from hr.employees;
Really hope it works for you as it did for me. Here everything was simple for beginners luck.
-
Application of FDM - Oracle database issues
Hello
We use the Hyperion HFM/FDM - 11.1.1.3 application. Recently, the Oracle database server is migrated to another server with an updated release 11g and we have reconfigured all HFM/FDM application on the new database server. But when stop us the old database, we are not able to connect to the application of the FDM. When we have verified all the XML configuration files, the code xml files have new details only of the databases.
When connecting to the web app FDM, we got the error messages below,
An error occurred logging system: database user ID and password are required for the connection
Thank you
Michel K
Do you really go to add application, select the application, edit and enter all new database references
See you soon
John
-
Problem establish Oracle Database Gateway for SQL Server
I configured dblink between Oracle and SQL Server by using the 'Oracle Database Gateway for SQL Server' method.
I use dg4odbc and freetds, suite Doc-ID 561033.1 .
I have my isql and osql works correctly, tsql.
But get below error when query any table/column of Oracle sql * for the sql server database.
Select subscription_type in Address@ITSMSP;
ORA-28511: lost RPC connection to heterogeneous remote agent using SID = ORA-28511: lost CPP
connecting to heterogeneous remote agent to help
SID = (Description = (Address = (Protocol = TCP)(Host=localhost) (port = 1522)) (CONNECT_DATA = (SID = ITSM-Prod)))
ORA-02063: preceding the line of ITSMSP
As per below track appears after the connection is a failure.
I get this error with each table or column selection.
I already prepare DBlink user id and password with the double quotes and link with the apostrophe.
One thing surprised me when I close my session it request commit or rollback.
Although I don't do anything except select.
I already tried by setting autocommit on, but still getting the same error.
We create the oracle for sql server before database gateway. This time, few things are different:
1. the name of the server (on sql server database) contains a '-' hyphen.
2. name of database server Sql contain also one '-' hyphen.
2 sql database server for windows 64 - bit OS, prior, we used 32 bits.
Please let me know if anyone set the Oracle database gateway using dg4odbc and freetds to sql server where the database of sql server resident in 64-bit windows machine.
Here's the snapshot trace: remove the server name with *.
Oracle Corporation - Tuesday 2 April 2013 21:15:38.096
Heterogeneous Agent release
11.2.0.3.0
Oracle Corporation - Tuesday 2 April 2013 21:15:38.096
Version 11.2.0.3.0
Hgogprd entries
HOSGIP to 'HS_FDS_TRACE_LEVEL' returned '4 '.
Hgosdip entries
default assignment of 50 HS_OPEN_CURSORS
setting HS_FDS_RECOVERY_ACCOUNT or 'RECOVER '.
HS_FDS_RECOVERY_PWD layout to the default
default HS_FDS_TRANSACTION_LOG of HS_TRANSACTION_LOG layout
HS_IDLE_TIMEOUT layout to the default 0 value
layout by default HS_FDS_TRANSACTION_ISOLATION of "READ_COMMITTED".
layout by default «AL32UTF8» HS_NLS_NCHAR
layout HS_FDS_TIMESTAMP_MAPPING default 'DATE '.
layout HS_FDS_DATE_MAPPING default 'DATE '.
layout HS_RPC_FETCH_REBLOCKING failure to 'ON '.
HS_FDS_FETCH_ROWS layout without '100 '.
parameter HS_FDS_RESULTSET_SUPPORT default 'FALSE '.
parameter HS_FDS_RSET_RETURN_ROWCOUNT default 'FALSE '.
parameter HS_FDS_PROC_IS_FUNC default 'FALSE '.
parameter HS_FDS_MAP_NCHAR if there is no 'TRUE '.
setting HS_NLS_DATE_FORMAT or 'YYYY-MM-DD HH24:MI:SS ".
parameter HS_FDS_REPORT_REAL_AS_DOUBLE default 'FALSE '.
HS_LONG_PIECE_TRANSFER_SIZE layout without "65536".
parameter HS_SQL_HANDLE_STMT_REUSE default 'FALSE '.
parameter HS_FDS_QUERY_DRIVER if there is no 'TRUE '.
HOSGIP returned the value 'FALSE' to HS_FDS_SUPPORT_STATISTICS
parameter HS_FDS_QUOTE_IDENTIFIER if there is no 'TRUE '.
setting in HS_KEEP_REMOTE_COLUMN_SIZE if 'OFF '.
parameter HS_FDS_GRAPHIC_TO_MBCS default 'FALSE '.
parameter HS_FDS_MBCS_TO_GRAPHIC default 'FALSE '.
Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
HS_CALL_NAME_ISP layout "gtw$: SQLTables; GTW$: SQLColumns. GTW$: SQLPrimaryKeys. GTW$: SQLForeignKeys. GTW$: SQLProcedures. GTW$: SQLStatistics; "gtw$: SQLGetInfo.
parameter HS_FDS_DELAYED_OPEN if there is no 'TRUE '.
HS_FDS_WORKAROUNDS layout by default "0".
Release of hgosdip, rc = 0
ORACLE_SID is ' *-* '.
Product information:
Port RLS / Upd:3 / 0 PrdStat:0
Agent: Oracle Database Gateway for ODBC
: Installation
Class: ODBC, ClassVsn:11.2.0.3.0_0011, Instance: *-*.
Release of hgogprd, rc = 0
Hgoinit entries
HOCXU_COMP_CSET = 1
HOCXU_DRV_CSET = 31
HOCXU_DRV_NCHAR = 873
HOCXU_DB_CSET = 873
HS_LANGUAGE is american_america.we8iso8859p1
LANG is en_US. UTF-8
HOCXU_SEM_VER = 112000
Entry hgolofn to 2013/04/02-21: 15:38
HOSGIP to 'HS_FDS_SHAREABLE_NAME' returned ' / usr/lib64/libodbc.so '.
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLAllocHandle
symbol_peflctx = 0x2ca08300
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLBindCol
symbol_peflctx = 0x2ca08390
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLBindParameter
symbol_peflctx = 0x2ca08b50
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLCancel
symbol_peflctx = 0x2ca09dc0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLDescribeParam
symbol_peflctx = 0x2ca11890
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLDisconnect
symbol_peflctx = 0x2ca11d30
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLEndTran
symbol_peflctx = 0x2ca14580
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLExecute
symbol_peflctx = 0x2ca15a20
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLFetch
symbol_peflctx = 0x2ca16220
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLFreeHandle
symbol_peflctx = 0x2ca17c40
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLFreeStmt
symbol_peflctx = 0x2ca17c60
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetData
symbol_peflctx = 0x2ca19370
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetEnvAttr
symbol_peflctx = 0x2ca1c4f0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetFunctions
symbol_peflctx = 0x2ca1c890
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLMoreResults
symbol_peflctx = 0x2ca1e330
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLNumResultCols
symbol_peflctx = 0x2ca1ef80
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLParamData
symbol_peflctx = 0x2ca1f280
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLPutData
symbol_peflctx = 0x2ca210b0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLRowCount
symbol_peflctx = 0x2ca21480
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLSetEnvAttr
symbol_peflctx = 0x2ca22fc0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLSetDescRec
symbol_peflctx = 0x2ca22e10
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLColAttribute
symbol_peflctx = 0x2ca0a3e0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLColumns
symbol_peflctx = 0x2ca0bb80
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLConnect
symbol_peflctx = 0x2ca0f4f0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLDescribeCol
symbol_peflctx = 0x2ca11150
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLDriverConnect
symbol_peflctx = 0x2ca12890
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLExecDirect
symbol_peflctx = 0x2ca154b0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLForeignKeys
symbol_peflctx = 0x2ca16b40
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetConnectAttr
symbol_peflctx = 0x2ca17fb0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetDescField
symbol_peflctx = 0x2ca199d0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetDescRec
symbol_peflctx = 0x2ca19e90
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetDiagField
symbol_peflctx = 0x2ca1b060
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetDiagRec
symbol_peflctx = 0x2ca1bc90
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetInfo
symbol_peflctx = 0x2ca1cad0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetStmtAttr
symbol_peflctx = 0x2ca1d4d0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLGetTypeInfo
symbol_peflctx = 0x2ca1df90
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLPrepare
symbol_peflctx = 0x2ca1f9b0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLPrimaryKeys
symbol_peflctx = 0x2ca1fec0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLProcedureColumns
symbol_peflctx = 0x2ca20470
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLProcedures
symbol_peflctx = 0x2ca20b00
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLSetConnectAttr
symbol_peflctx = 0x2ca21770
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLSetStmtAttr
symbol_peflctx = 0x2ca24320
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLSetDescField
symbol_peflctx = 0x2ca22b30
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLStatistics
symbol_peflctx = 0x2ca258c0
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Entry hgolofns to 2013/04/02-21: 15:38
LIBNAME=/usr/lib64/libodbc.so, funcname is SQLTables
symbol_peflctx = 0x2ca26550
hoaerr:0
Out of hgolofns to 2013/04/02-21: 15:38
Release of hgolofn, rc = 0 to 2013/04/02-21: 15:38
HOSGIP to 'HS_OPEN_CURSORS' returned '50 '.
HOSGIP to 'HS_FDS_FETCH_ROWS' returned '100 '.
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536".
HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. "
HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '.
HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '.
HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '.
HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '.
HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '.
Invalid value of 64 for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Release of hgoinit, rc = 0 to 2013/04/02-21: 15:38
Entry hgolgon to 2013/04/02-21: 15:38
Reco:0, name: *, tflag:0
Entry hgosuec to 2013/04/02-21: 15:38
Release of hgosuec, rc = 0 to 2013/04/02-21: 15:38
HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '.
HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG".
HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '.
HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '.
HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '.
HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '.
HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '.
HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.
HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.
using the * as a default for 'HS_FDS_DEFAULT_OWNER '.
HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.
Entry hgocont to 2013/04/02-21: 15:38
HS_FDS_CONNECT_INFO = ' *-* '.
RC =-1 of HOSGIP for 'HS_FDS_CONNECT_STRING '.
Entry hgogenconstr to 2013/04/02-21: 15:38
DSN: *-*, name: *.
OPTN:
Entry hgocip to 2013/04/02-21: 15:38
DSN: *-*.
Release of hgocip, rc = 0 to 2013/04/02-21: 15:38
# > connection settings (len = 39) < #.
## DSN=****-****;
#! UID = *;
#! PWD = *.
Release of hgogenconstr, rc = 0 to 2013/04/02-21: 15:38
Entry hgolosf to 2013/04/02-21: 15:38
ODBC function-available-table 0xFFFE 0x00FF 0xFF00 0x03FF 0xFB7F 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0 x 0000 0xFE00 0x3F5F
Release of hgolosf, rc = 0 to 2013/04/02-21: 15:38
DriverName:libtdsodbc.so, DriverVer:0.91
DBMS name: Microsoft SQL Server DBMS Version: 95.10.0255
Release of hgocont, rc = 0 to 2013/04/02-21: 15:38
SQLGetInfo Returns Y for SQL_CATALOG_NAME
SQLGetInfo Returns 128 for SQL_MAX_CATALOG_NAME_LEN
Release of hgolgon, rc = 0 to 2013/04/02-21: 15:38
Entry hgoulcp to 2013/04/02-21: 15:38
Entry hgowlst to 2013/04/02-21: 15:38
Release of hgowlst, rc = 0 to 2013/04/02-21: 15:38
SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
Able TXN: isolation 2, Option: 0xf
SQLGetInfo Returns 128 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo Returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 134 to SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned the value "TRUE" to HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns "(0 x 22) for SQL_IDENTIFIER_QUOTE_CHAR"
instance 2 capabilities will be uploaded
context: 0x00000000, capno:1989, add info: 0
context: 0x0001ffff, capno:1992, add info: 0
Release of hgoulcp, rc = 0 to 2013/04/02-21: 15:38
Entry hgouldt to 2013/04/02-21: 15:38
NO translation of DD for instance have been downloaded
Release of hgouldt, rc = 0 to 2013/04/02-21: 15:38
Entry hgobegn to 2013/04/02-21: 15:38
tflag:0, original: 1
Hoi:0x4093b4c8, ttid (len 38) is...
00: 54415058 2E435245 49474854 4F4E2E45 [TAPX]
10: 44552E33 61383332 3362322E 312E3233 [3a8323b2.1.23]
20: 2E323037 3631 [. 20761]
tbid (len 35) is...
00: 54415058 2E435245 49474854 4F4E2E45 [TAPX]
10: 44555 B 31 2E32332E 32303736 315D5B31 [[1.23.20761] [1]]
[20: 2E345D [. 4]]
Release of hgobegn, rc = 0 to 2013/04/02-21: 15:38
Entry hgodtab to 2013/04/02-21: 15:38
number: 1
Table: address
Allocate hoada [0] @ 0x14eedc70
Hoada free [0] @ 0x14eedc70
SQL text of hgodtab, id = 0, len = 23...
00: 73656C 65 6374202A 6 202241 2066726F [select * 'a]
10: 64647265 737322 [prepare]"
Entry hgodscr_process_sellist_description to 2013/04/02-21: 15:38
Thanks a lot for your help.
PAL
Published by: 997807 on April 3, 2013 07:26Hello
Thanks for the information. 2.2 UnixODBC driver manager is quite old and there is now one more late 2.3.1 version available here.http://www.unixODBC.org/
by clicking on the tab "Download".
Can you download and install this version then use in the configuration instead of the 2.2 version?Kind regards
Mike -
Best idea practice; PDF forms to the Oracle database idea?
Work on a kind of checklist of the form
Most of the items is "Compliant", "Non-compliant", "not applicable".
So with check all three boxes labeled 'item2' I get the behavior I want. Specifically, there are three options, but only one is allowed.
Currently, the plan is to complete the document, save and print or send an email. So far so good.
BUT...
In the long run, it would be that data will by electronic mail in a format to an Oracle database.
Question:
What kind of logic should be fixed (and where) as 'for 'item2' choice of a single and even a universe of 3's [reply]
I guess Javascript (not well versed in the present yet), but is there something simpler?
Thank you
Giving all the check boxes in the Group of the same name is the right approach.
You must also give a unique export value in each box. This allows you to identify which box has been ticked. When the data is exported, the value of the field will be the value of exports from the enabled checkbox.
If none of the check boxes in the group is selected, the field value will be equal to the string 'Off', but not 'off', false, or anything else.
-
How to install an Oracle database for the practice on laptop?
Hi all
I intend to install the database Oracle and some products of oracle developers to practice on my laptop.
# Configuration of the laptop
> Lenovo IdeaPad Y450 - 41896AU
> Intel® Core™ 2 Duo T6600 (2.20 GHz)
> 4 GB of RAM, 320 GB hard drive
> Windows 7 Home Premium 64-bit
I'm looking for help on the doubts in this regard.
What version of the oracle database is very good-suite/work for this configuration of the laptop and the path to download the same?
Kind regards
Additional information about this facility.
Shyam.Hi Sham;
URL to download Oracle enterprise linux.
You can use http://edelivery.oracle.com/linux
Detailed step put virtual box or VMware.
Check: http://downloads.vmware.com/d/info/desktop_downloads/vmware_workstation/7_0
Detailed step to install linux on a virtual machine.
Visit this site: http://stahlworks.com/dev/index.php?tool=vmlinux
Detailed step install oracle 10g / 11g release on linux.
Check below for 10g:
http://www.Oracle.com/technology/tech/Linux/install/index.html
http://kamranagayev.WordPress.com/2009/05/01/step-by-step-installing-Oracle-database-10G-release-2-on-Linux-CentOS-and-automate-the-installation-using-Linux-shell-script/Check below for 11g:
http://wiki.Oracle.com/page/install+Oracle+11g+on+CentOS+under+VMware+WindowsRespect of
HELIOS -
Make case-insensitive oracle database
Hi all
I use oracle 10g EE that my front end and database backend is in c# .NET. I want to make my oracle database to perform any case comparison insensibly. I searched the net and found several ways to achieve
1. use the upper function in procedures - cannot afford
2. order of the function - cannot afford
3. setting session parameters
ALTER SESSION SET NLS_COMP = ANSI;
ALTER SESSION SET NLS_SORT = BINARY_CI;
The 3rd is promising and can save a lot of time. I have several question
1 is there a way I can adjust these settings in .NET?
2 is it possible I can set both and will do only my case insensitive database?
any link, reference is very appreciated.
Thank youYou can create a unique index of the feature based on this column to avoid that these records.
I don't see that should be case-insensitive database here.
-
Turning to Oracle RAC to the only Oracle database
Hi all
We are responsible for "make a copy" of Oracle RAC database a customer and our plan is to finish with the FCAC and allows you to host a new unique Oracle database. Very few of us familiar with CARS and looking for suggestions on how to do it (without affecting the source JAR).
Can take a full expdb of the source database and simply use impdp to import into the standalone database server?
Comments/suggestions appreciated.
Thanks in advance.
Can take a full expdb of the source database and simply use impdp to import into the standalone database server?
It is an option. Data pump does not care if the source and/or destination is CARS or a mix. If the database is too large, it can take a lot of time to complete.
Another option is to use the DOUBLE of RMAN feature. And another option is to restore the database from a backup.
See you soon,.
Brian -
two node Oracle RAC with two Oracle databases completely different on each node?
We currently have two different applications that use Oracle databases. Current configuration is two different oracle homes dbhome_1, dbhome2 with separate mounting LINUX points containing the Oracle homes and *.dbf files on a single host server.
Previously, the idea was to set up a second server identical host configured as a 'data guard' for both of these databases. Now, management wants to implement a cluster of CARS of two nodes, with each node running two databases. With the Standard edition.
I only did CARS of high availability and scalability for a single database. Is it possible to run two completely different databases Oracle on a two-node RAC cluster? I am inclined to think that they it has divided into
two clusters RAC to two nodes on four small servers host. Any suggestions or comments would be appreciated?
Is it possible to run two completely different databases Oracle on a two-node RAC cluster?
The short answer is Yes... it is possible. It will work without any problem, as long as you have the resources available to an additional database.
I am inclined to think that they it has divided into two clusters RAC to two nodes on four small servers host.
There is another option. In the past I have two databases on a RAC cluster that has been implemented for reasons of cost of license / (I don't think that this applies to itself, but you will need to check).
However having seen on separate hosts that you have only potentially interruptions of service on a database if you decide to do something like upgrading from one of the databases and thus upgrade the GI as well. This would mean interruptions in service for all your databases using the GI.
-
where can I get the software for oracle database 11g RAC installion
pls can someone tell me where to download the installation software for oracle database 11g RAC with Yes which has the option of installing RAC database on, I the installation of database 11g software, but it does not include the installation of database RAC inside option, I heard someone say that the installer of oracle database 11g in oracle's Web site is not used to install a RAC database is it true? If that's how to make one that installs the RAC DATABASE.Download page:
http://www.Oracle.com/technology/software/products/database/Oracle11g/111060_linuxsoft.html-Oracle Database 11 g Release 1 (11.1.0.6.0) for Linux x 86
linux_11gR1_database_1013.zip (1,844,527,800 bytes) (cksum - 1044354138)-Oracle Clusterware 11 g Release 1 (11.1.0.6.0) for Linux x 86
linux_x86_11gR1_clusterware.zip (244,660,141 bytes) (cksum - 820583335)Maybe you need to download is: Clusterware Oracle 11 g
Document: Oracle® database 2 day + Real Application Clusters guide 11 g Release 1 (11.1)
http://download.Oracle.com/docs/CD/B28359_01/RAC.111/b28252/TOC.htm -
Hi Experts,
1 can you please let me know why we need to set up under IP addresses for the RAC configuration and what is the role that each plays?
-Public
-Private
-Virtual
-SCAN
2. What is the relationship between IP SCAN and virtual IPs?
ConcerningHello
859875 wrote:
Hi Experts,1 can you please let me know why we need to set up under IP addresses for the RAC configuration and what is the role that each plays?
-Public
Configured before installation for each node and can be resolved at this node before installing.
Role:
Enable Virtual/SCAN configuration/communication between the nodes in the cluster. Do not start the Clusterware without public IP Interface/address.
Virtual/SCAN will work as an alias IP on the public Interface on the Public network.-Private or interconnection
Configured before installation, but on a separate private network, with its own subnet, which is not resolved except by other nodes in the cluster member
Role:
Clusterware uses for cluster synchronization (network heartbeat) interconnection and communication of demon among the nodes in the cluster.
RAC uses the interconnect for cache fusion (UDP) and inter-process communication (TCP).
Cache Fusion is the remote Oracle buffers, shared memory mapping between the caches of the members of the cluster nodes.-Virtual
Configured before installation for each node, but not currently in use. IP, VIP and treats public SCAN addresses than any other addresses on the same subnet.
Role:
The goal is the availability of the applications. If add or remove nodes as your remove VIP client config (with SCAN, it is not necessary)
When a node fails, the VIP associated with it is automatically failed over to another node.
Without using VIPs or FAN, clients connected to a node who died often wait a TCP timeout (which can be up to 10 min) before getting an error.
So, you don't have really a good HA solution without using VIPs and FAN. The best way to use the FAN is to use a client integrated with fast connection failover (FCF) such as JDBC, OCI, or ODP.NET.-SCAN
Three static IP addresses that are configured on the server (DNS) domain names prior to installation so that the three IP addresses are associated with the name provided as the SCAN, and all three addresses are returned in random order by the DNS to the applicant
Configured prior to installation in the DNS to resolve the addresses that are not currently in use. Addresses on the same subnet than all other IP addresses, addresses VIP and public SCAN
Role:
The goal is the availability of the applications before clients establish communication with CARS and make the whole of the Cluster completely transparent.
IP SCANNER is a new 'layer' (oracle) with high availability network that allows to modify the characteristics of your cluster (IE add/remove nodes) without having to change the configuration in their concept of customers 'grid '.
>2. What is the relationship between IP SCAN and virtual IPs?
IP SCANNER is used to receive new connection requests and redirects to the VIP IP.
The virtual IP address sets and allow failover of connections after connection is established.When the client requests a connection, Oracle Client 11 GR 2 find for IP addresses and create a list of all IP SCAN available for this host-scan, the first attempt to connect to RAC uses one of the available SCAN IP addresses.
The listener ANALYSIS will receive this connection and re - direct to one of the available using LOCAL_LISTENER nodes from that time the connection is made by using the virtual IP (VIP).All SCAN/VIP must be resolved by the DNS.
The customer knows that there is only the Hostname SCAN, which is configured in the connection string.
Once the connection is requested Oracle Clusterware redirects the connection to one of the VIP host name must be resolved by the DNS.Kind regards
Levi Pereira -
Hello
Someone told me that there is a new Oracle 12 c availability maximum expert certification exam.
But I don't see any number of review for her.
Thank you Roger
It is not a review of these credentials. It is a 'bonus' credential you receive if you get three other certifications:
12 c of Oracle Certified Professional database administrator
Oracle Certified Expert 12 c Data Guard Administration
Oracle Certified Expert 12 c RAC and grid Infrastructure of Administration
More info on:
-
Linux and oracle database installation best practices windows
can anyone recommend the guide of best practices for the installation/design of windows/Linux oracle database servers.
Microsoft, sql Server, provide a number of useful resources on the evolution of the default parameters that can die of hunger the operating system of resources, where to and where not to store the data in files/logs etc etc, but I've yet to find a similar guide for Oracle. Research on best practices during the installation/initial design in order to avoid the risk of recovery/redundancy later on any line, reliability, availability, performance. Guidance most welcome.
See following note metalink on system requirements for the different versions:
(Doc ID 169706.1) - database Oracle (RDBMS) Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix OS Installation and Configuration requirements checklist (8.0.5 to 11.2)
Online Oracle Database Documentation 11g Release 2 (11.2)
-Som
Maybe you are looking for
-
Reset password in Windows Vista
Is there a way to reset the password in Windows Vista? I have a laptop Compaq CQ50 Presario. It is old computer of my stepdaughter, and of course she can't remember the password to connect. Any advice would be greatly appreciated. Thank you Bob
-
Best processor for my hpe-112y
OK so I got my card I got my diet now I need a better cpu recital 2 of im heres http://products.AMD.com/en-us/DesktopCPUDetail.aspx?ID=534 http://products.AMD.com/en-us/DesktopCPUDetail.aspx?ID=591 & f1 = f2 = & f3 = & = f4 & f5 = & = f6 & f7 = & f8
-
Satellite M70-337 memory card reader
Can someone help me. My memory card reader, used to work until the laptop crashed and has been corrected now, it will not show well Yes on my computer cannot get the images out of my camera. HAVC
-
Windows 7 Beta now Vista SP2 make ipod synchronization impossible.
I arrived at the time when I was running Windows 7 Beta and now it happened again after that I went back to Vista, but installed SP2 this morning. iTunes takes 30secs-5 minutes to synchronize a track to an iPod. After rolling back to SP1 it works fin
-
Windows 7 Build 7601 tells me "this copy is not genuine." Help!
I use Windows 7 Ultimate 32 - bit of 2 months. I don't have any problems with it so far. After an automatic update failed, it gave me error 0xc004f200 code. Help, please!