Orchestrator WF began in the interface graphic Web has no parameters préassignés

Similar Questions

• I get the message that the NVIDIA graphics driver has a problem

  maintenance cleaning disc

  get the message that the NVIDIA graphics driver has a problem

  Hello

  I suggest you uninstall the drivers from the Device Manager and software programs and features Nvidia.

  1. on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  1. in Device Manager, look for graphics card, right-click, and then click on uninstall.
  If you are unable to locate it, then go to view, then select 'show hidden devices '.
  2. When you are prompted to confirm that you want to remove the device, click OK.
  3. restart the computer.
  After the computer restarts, the drivers will be installed automatically. Check if it works very well.

  If this is the case, update the drivers from windows update.
  See also:

  I suggest update you also the drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to contact NVIDIA support and check.

  http://www.nvidia.com/object/windows_7_overview.html

• Access the interface user Web de VMware Server 2 will crash Firefox 3.5

  Hello

  Trying to access the web interface installation of VMware Server 2 running on Enterprise Linux 5 update 2 64-bit

  using Mozilla Firefox 3.5 on XP causes Firefox to crash.

  Previous Firefox 3.0.11 version was able to connect and log in successfully.

  Everything in FF 3.5 cach has been deleted before trying to access the user interface. In addition, the certificate has also been removed before.

  When you access the UI first with 3.5 ist ask to accept the certificate (identical to 3.0.11)

  This will result in a blank page is displayed.

  Closing FF 3.5 (clear cache included) and re-open it at the interface of the web UI that causes FF crash.

  I m the only one to see this problem with the new Firefox 3.5 access to VMware Server 2 Web UI?

  Kind regards

  Agent of

  Although VMware-server - 2.0.1 - 156745.x86_64 has been out for a while, so I just assumed it was your version.

  Silly me

  Hope that cure your problem.

• I get the message that the ATI graphics driver has stopped working and I don't know what product I choose to set the problem__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Uninstall/reinstall your video drivers. Find them in EITHER OEM for your specific model computer Web site if you have a branded computer (Dell, HP, etc.). OR from the Web of ATI site if you have a generic construction machine. MS - MVP - Elephant Boy computers - don't panic!

• The 'save for web' has disappeared... :-/

  I've recently updated my settings, confirmed that the color profile is RGB, and yet I can not save for web. He disappeared suddenly gray and cannot be accessed. I can't yet save in jpg or png. :-/ I use Photoshop on a Mac 10.9.4 CC

  Under Image > Mode > RGB are you fixed to 8bits/channel?

  Nancy O.

• Error message - status of the Interface Windows printer has stopped working

  I am able to print just one document for this error message to appear.  It happens every time I try to print.  When I restart the computer, it prints the current document.  The error occurs once I can't cancel the document or do anything with the printer.

  
  

  How can I fix these errors?

  Hello
   
  1. did you of recent changes on the computer?
  2. who is the manufacturer of the printer?
   
  Try these steps and see if you can print without problem.
  Step 1: Update of the printer.
  1. visit the printer manufacturer and check whether there is an updated driver.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
   
  Step 2: Run Microsoft troubleshooting to solve the problem.
  1 visit the following link and click on "Run now", follow the instructions to run the Troubleshooter: http://support.microsoft.com/gp/printing_problems
  2. print and check if you are able to print multiple documents without any problems.
   
  If the problem persists, contact the manufacturer of the printer.
   
  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The interface of Photoshop CC 2015

  Photoshop has been screwed up when documents became moored a few years ago. The quick Toggle shortcut F fails to cycle fully all the time. He severely paralyzed my workflow, permanently. But this 'upgrade' 2015 infuriates me beyond any previous interface messing around.

  T he hell where my keyboard shortcuts? Why 80% of the usual icons are stuffed under an incontinence that I have to CLICK & HOLD each time I want to use a tool?
  
  I don't have half an hour to find out how to cancel these terrible changes: I operate in a work environment where every minute counts. I need my shortcuts back. AS SOON AS POSSIBLE.

  Seems that my install set up on the parameter interface graphic & Web.

  This caused a massive panic but that is resolved by choosing Essentials.

  This topic can be deleted, because it is an angry rant.

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Is there a way to trigger an event of the interface programmatically?

  Hi all!

  I'm practical with LabVIEW. Right now I'm dealing with events, the interface events (those that are associated with the controls and indicators) and the user (the ones I created) events.

  When a particular event occurs (not related to the interface), I need to run code that is the same whether I managed in a business event for an event of the interface.

  The question is simple: is there a way to "reuse" code used to manage the interface event it shooting programmatically after the particular event occurs, or I need to create a user with the same code event (wasting time, memory, etc...)?

  Thankz

  It depends on what is the event of the interface.

  If it's something like a button or a change in a digital control, you can use the Value property node (Signalling).  So if you want to simulate the pressure of a Boolean button, you can wire a Boolean constant True to the value of property for this Boolean control signaling node.

  If there are other types of events of the interface you want to manage as a mouse down, Panel reach,..., it might be a good idea to put your real code inside the user event and that the Interface event it has code that triggers the user event.

• Activate the integrated graphics controller (Acer Aspire M3970)

  Hi all

  I hope someone is able to tell me if it is possible to activate the graphics controller embedded on the Acer Aspire M3970.
  When I bought the pc, there was already an external graphics card in one of the slots. It contains only a HDMI and a DVI port, and the integrated graphics card has the possibility to use a HDMI and VGA port.
  I was wondering if it is possible to use both the external graphics card and the integrated graphic card so I can use 2 HDMI ports, the VGA port and DVI port.

  I know that most of the BIOS have an option to choose between what graphics card to use, but I can't seem to find it.
  I thought I'd find in: BIOS > ADVANCED > Integrated Peripherals, but I don't have options:

  Hi poepsmurf2

  As far as I know, you cannot use the graphics card and the edge together. You can buy a card with 2 HDMI or VGA and DVI ports.

  I hope this helps!

• Help with the new graphics card on old pc

  I have a dell dimension 3000 'ya I know sad' I would like to add a graphics card and a new soft power since the wife won't let me buy a new PC GRRRR

  I have a GeForce 6200 PCI 256 MB dcr2 it will work in this pc

  I also bought a power electric double w 480 SATAs is large enough to run the new card and the pc?

  Thank you

  You can add the 6200 PCI if you wish.  It does not require an upgrade of the power supply however.  It will work fine on your PSU 250 watts.  I have the 6200 circulating in a Dell with a 250W unit just to get the higher resolutions than the integrated graphic card has been able to provide in support of a monitor.

• I have a problem with the ATI graphics driver.

  My laptop has rebooted, twice so far, as I was watching an episode of a series, and in the center of the action it is said that: a problem with ATI Graphics Driver and the ATI graphics card has stopeed working 2 times, last occurring on the 11.06.2014 13:36.Steps are available to solve this problem... .but when I click on it it says that;

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  ... and I searched the internet on the microsoft.com site, and the page is like this:

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

  What can I do?

  You should go to this site and make sure you have the latest drivers for your video card.

  http://support.AMD.com/en-us/download

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• Generator interface user Web supports the DSC Module?

  A simple question:

  Can I use the generator of the user Web interface for Web client access to a Windows-LabVIEW System with the DSC module or supportet has this tool user interface only the LabVIEW base for the objects in the front?

  For example: Can I use a web client to review historical data and alarms? Can I use a web client with full support for "The front panel security dialog box" (see http://zone.ni.com/reference/en-XX/help/371618F-01/lvdsc/front_panel_security_db/)?

  Best regards

  Frank

  Hi Frank,.

  Yes, you can use the generator of the user Web interface to access historical data and view the current alarms. The LabVIEW 2010 version of the ASN has several built-in RESTful web services that make the Citadel and alarm available via HTTP data. Here are some resources to provide details on how it works.

  Interact with Web Module DSC Services

  Here is an example that illustrates how to implement web service at the Citadel communication:

  Communication of data via Web Services in the Web of LabVIEW user interface Builder

  Kind regards

  Mike

• Could not load the interface Web VMware Server 2

  Hello

  It seems that there have been a number of users has a problem similar to mine. Unfortunately so far it seems not be an easy fix. A few weeks ago, I downloaded VMware Server 2.0.2 and installed on my Ubuntu 8.04 Server. Surprisingly, it worked very well and I set up a virtual machine via the web interface. It took 3 weeks later I started having problems. Or, when I tried to access the web interface through the browser page just came not upward or it came I have connected, but then was then put on the door.

  Initially, I have done the following but doesn't seem to help.

  -Reboot the system

  -Restart all vmware services

  -Delete all cookies and cache.

  Then I thought that this question had to do with the process of webaccess. It seems that the process was not because for a very short period of time, the connection appeared and I was able to connect. But after a short period of time, it displays an error and then the connection was unreachable again.

  I checked the port 8308 below:

  netstat - LNP | grep: 8308

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 5754/webAccess

  Here is the response from audit ipv6:

  netstat - LNP | grep tcp6

  ping6-c1 localhost

  Unknown host

  I disabled it by changing of ipv6 on off in the etc/modprobe.d/aliases.

  My hosts file resembles the following:

  127.0.0.1 localhost

  127.0.1.1 web web.cinci.rr.com

  The following lines are desirable for the hosts with IPv6 support

  : 1 localhost ip6 ip6-loopback

  FE00::0 ip6-localnet

  FF00::0 ip6-mcastprefix

  FF02::1 ip6-allnodes

  FF02::2 ip6-allrouters

  FF02::3 ip6-allhosts

  I have attached the file proxy.log. I saw a few exceptions so don't know if this has to do with the problem.

  Also, I've included the hostd.log (it's in a zip archive because there are a few files of newspapers spend). I have

  Finally, I checked all the active internet connections and sockets. The results are below:

  Connections Internet active (only servers)

  Name of Proto Recv-Q Send-Q address foreign address State PID/program Local

  TCP 0 0 127.0.0.1:8005 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 6888/vmware-authdla

  TCP 0 0 0.0.0.0:8009 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:8333 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:23 0.0.0.0: * LISTEN 4421/sshd

  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 0.0.0.0:8222 0.0.0.0: * LISTEN 6994/vmware-pass

  UDP 0 0 0.0.0.0:68 0.0.0.0: * 4393/dhclient3

  brute 0 0 0.0.0.0:1 0.0.0.0: * 7 6634/vmnet-natd(8)

  UNIX domain sockets active (only servers)

  Proto RefCnt flags Type State I-node PID/name path of the program

  UNIX 2 BDRM STREAM LISTEN 16158 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfc-fd

  UNIX 2 BDRM STREAM LISTEN 16165 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfcssl-fd

  UNIX 2 BDRM STREAM LISTEN 16167 6994/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 BDRM STREAM LISTEN 16189 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/hostd-vmdb-fd

  UNIX 2 BDRM STREAM LISTEN 16191 6994/vmware-pass/var/run/vmware/proxy-mob

  UNIX 2 BDRM STREAM LISTEN 15714 6634/vmnet-natd(8) /var/run/vmnat.6634

  UNIX 2 BDRM STREAM LISTEN 11895 4940/python /var/run/fail2ban/fail2ban.sock

  Finally, just to try to "start over". I removed VMware Server system and reinstalled. Since the virtual machine is in a separate Directory I thought I had nothing to lose. Removal and resettlement seem to succeed. After a reboot and an attempt to access the interface web it STILL didn't work. I'm really at a loss right now. Any help would be much appreciated.

  Thank you

  Aaron

  Hello

  Welcome to

  Don't forget to give my answer. It is the way to give users of vmware communities who helps others.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog