OS 6.0.0 on 9700 screen.getMenu (0) does not work

Similar Questions

• Satellite U920T - duplex cam + touch screen + win button does not work

  I have the problem as the touch screen + frontal camera + camera rear windows on the screen button do not work.

  I tried to install the drivers to display/graphics but that has not helped.

  I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country, so I can't ask the warranty as well.

  someone please fix this and tell me the solution, or tell me what I need to do?

  Help will be really appreciated.
  some details on my laptop:

  Toshiba Satellite U920T-B919.
  Windows 8.1 updated 64-bit.

  Thank you

  Since you mentioned different problems with your laptop, I think that in this case its recommended to get the laptop back to factory settings just to check if all these problems are related to the problem of system.

  Regarding the webcam: Windows 8/8.1 already contains the webcam drivers and therefore additional webcam driver installation isn t possible. Extra webcam driver is not simply.

  From my point of few smells of any description as a bit of a problem of material, the upper part of the slide where the touch screen is part of.
  The key win as well that the two cams are located and there are probably some lose the connection between the two parties (touchscreen and keyboard)

  Anyway, as I said more top, its recommended to recover the laptop to factory settings just to make sure that the system isn t the troublemaker.
  In case of hardware problems, you must get in touch service available in your country.

• Re: Satellite C660 screen brightness adjustment does not work

  Hello

  Its been 10 days since I brought my Satellite C660 - series laptop.

  Fn + F6 or Fn + F7 keys for brightness control do not work. I see no change in brightness. There is no information or indication of the setting shown on the display.

  Can anyone suggest an alternative to set the brightness of the screen?

  Other keys FN + Fx work correctly?
  You can change the display brightness by using the power management option?

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• Screen rotation backwards does not work

  My z2 xperia phone does not turn on the screen when held upside down in position. In other words, it does not turn the screen 180 degrees from the normal position. 90 degrees each rotation is correct. This happens in safe mode as well.
  Is this a bug or a feature? Is there a cure?
  Thank you
  Amit

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  The display can not be rotated 180 degrees, it can only rotate 90 degrees on each side.

• Screen saver program does not work after reinstallation of Win7 (missing Direct 3d devices)

  I had a problem with a screen saver program that has run before on this machine.
  I had to reinstall windows 7 recently and he has not worked since.
  I am running Windows 7 64-bit, the monitor is a Dell 2310 ST s/n is CN-OU217R-72872-O2B-OUJS.
  My PC is a Dell Studio MT Pentium Dual Core E5400 VT (Description of the invoice)

  The error I get is "unable to find any compatible Direct 3d devices.

  The monitor driver is Dell_ST2310_Analog and I checked that there are no new versions.

  There are 3 drivers listed under sound, video and game controllers:

  1 Intel(r) High Definition Audio HDMI
  2. Realtek High Definition Audio
  3. Audio USB device

  I did a scan for #3 and it updated to a Webcam Pro 9000, which is a device that I have attached.
  The other 2 drivers are the latest from the scan.

  It seems that is missing a driver, or I need to change some settings, but I don't know who. Wonder if you could help me.

  Well, you would believe that I received an update from Microsoft Sunday night late and this morning everything works very well.

  Ignore the problem.

• Screen on satellite does not work but is fine on an external monitor

  My laptop is no longer displays on his screen. I can only display on an external monitor.

  This is sign of the screen LCD is faulty or a problem with the connection. If the LCD is just dark, but you can in some way identify what is shown, it may be because only incomplete FL inverter.

• I want to use the print SCREEN key, but does not work.

  Using Vista, I want to activate my key on my keyboard screenshot to capture what I have on my screen at the same time.  When I press it, nothing happens.  Is there something that I need to program to operate?

  You must stick somewhere after you press the button.

  http://www.SeoConsultants.com/Windows/print-screen/

  Often abbreviated Prt Scr, print screen key is a useful key supported by most of the PC. On the BACK, by pressing the print screen key causes the computer to send some images and text are currently on the screen to the printer. Some graphics programs and Windows, use the print screen button to get screenshots.

  Now, how to see the screenshots or maybe even send them to someone? The fastest and most effective method is to have a practical graphic editing program. If this isn't an option, you can open your favorite word processing program and create a new document. Place your cursorat the beginning of the document, or wherever you want the screenshot to appear.

  Using your keyboard, press Ctrl + V which will Paste the screenshot in your open document

  http://graphicssoft.about.com/cs/General/HT/winscreenshot.htm

  How to capture a screenshot of your desktop or window Active in Windows

  http://www.ibiblio.org/virtualcell/Tutor1/TandR/PrtScr.html

  http://www.ehow.com/how_4682072_use-print-screen-laptop.html

  How to use the print on your laptop screen

  See you soon.

  Mick Murphy - Microsoft partner

• 21:9 (2560 x 1080) ultra wide screen Macbook Air does not work after macOS Sierra

  I have a problem with my LG 29UM58.-p.

  After the installation of macOS Sierra Switchresx (4.5.3) isn't my custom resolution 2560 x 1080 more. I already tried to uninstall Switchresx and took new custom resolutions, but it did not help... First of all, it did not save my custom resolutions and then he said no "installed" or "active - invalid? Also, someone said if you made an additional account on your mac and then define custom resolutions, you can then use it in your normal macaccount, but he also didn't work...

  I tried (almost) everything... before the update of the software it was working fine.  Oh and also I use HDMI to mini displayport.

  Could someone help me out here?

  Thank you very much!

  Hey man, same here. That I'm going through exactly the same thing here. I have a MacBook Air from 2013 and just bought the exact same display. I'm on MacOS Sierra.

• When my page is reduced to half of my screen, horizontal scrolling does not work.

  He worked previously, but he just stopped. If I'm on a Web page and trying to scroll sideways with two fingers, it does not work. Vertical scrolling works very well.

  I'm on a Dell Inspiron running Windows 7.

  Start Firefox in Mode safe to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  To turn on safe mode

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
  • Once you get the pop-up, simply select "" boot mode safe. "

  If it works in Mode safe mode and normal mode with all extensions (Tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: ' Firefox > quit Firefox. " Linux: "Firefox/file > exit ')

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Satellite A100-683 with Win 7 - screen brightness adjustment does not work

  Hello

  I have a model of Satellite A100-683 PSAA9E with Win 7

  My problem is that I don't have a brightness in my dashboard-> laptop Center

  I tried to install the drivers from the site Web of Toshiba (additional package, return), but stops the installation always with errors such as: value added package: PVAT Setup error

  I tried to install the drivers for Vista...

  Please help me!
  Sorry for my English mistakes.

  Hello

  The installation may stop due to system problems or the PVAT erroneous version.
  I recommend you to uninstall the installed VAP.
  After the PVAT has been uninstalled, restart the laptop.
  Now, download and install the tool small freeware called CCLeaner.
  It helps to clean the system and deletes files temporal garbage from the HARD drive.
  After the cleaning of the system registry, you must restart the system once more.

  Now, go to the page of the Toshiba UE driver and download the Toshiba value added Package for Win 7. Note! Choose the right! There are differences between the 32-bit and 64-bit version.

  Unzip the package, run the exe from installation or installation file and start the installation.
  Installation should finish properly and after new reboot, you should be able to use the function keys.

• the poster of the Bookmarks window is too big (suddenly occurred with the new version). I can't figure out how to get the smaller screen. Zoom does not work on the display of the menu bookmark.

  I have the 4 version, just download and a Mac OS 10.6. w. 7.
  Display the bookmarks (when I pull to the low "bookmarks") is far too broad. I can't understand how to reduce the display size. The window is not persistent, so I can't yet get you a screenshot.
  Thank you, Sara

  It seems that there is a change in Firefox 4, where the width of the drop-down list is now determined by the length of the longest bookmark name in the displayed folder. Versions previous of Firefox would be to shorten a long name like this and add an ellipsis to indicate the name has been truncated.

  Sorry, I don't know how to change it otherwise that you advise to change the name of this long bookmark name and make it less wordy. Just scroll to the bottom of the list of bookmarks in this vast folder until see you the culprit, then right click on that bookmark and open properties and change the line of name at the top of this dialog box.

• My screen saver pictures does not work.

  What should I do to fix this problem?

  Hello

  1. it happens with all the screensavers on the computer?

  2. using any third-party for the screensaver application?

  I suggest you to try the steps below and check if it helps.

  Diagnose and repair problems when displaying the photos/images and slideshows with Windows Photo Gallery and screensaver automatically. http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  Hope this information is useful.

• On-screen display audio does not work

  Children picked up a virus, my fault, so I called microsoft for 32-bit windows vista business and reformatted the hard drive disk. The only thing that doesn't work is the audio display. Suggestions?

  Hi Zilla,

  The other person you meet may have the same problem but not the original poster.  I ordered the recovery disk to an authorized dealer for half of what charges of Lenovo.  I still have 239 days left on my warranty but I'm not sure what it covers.  Hope I don't have to use it.  Thanks for your reply.

• Video recorder does not work after a while to 9700 and 9000

  Hello

  When I try to record videos on my series of blackberry bold 9700 and 9000 it does not work properly.

  It record video for a while after that he'll I'll stop recording. I am trying to use the socket for the recording of the video connection. My code works fine on storm9550.and also I added a playerlistener and in the events of update of the player, it shows event as error and event day that null.and when I try to change the image of the camera or pass command to any other fields it will stop recording

  I enclose my code as well as this.

  Thanks and greetings

  Rahul TERTULIEN

  Mobile applications developer

  import java.io.IOException;
  import java.io.OutputStream;

  Import javax.microedition.io.Connector;
  Import javax.microedition.io.SocketConnection;
  Import javax.microedition.media.MediaException;
  Import javax.microedition.media.Player;
  Import javax.microedition.media.PlayerListener;
  Import javax.microedition.media.control.GUIControl;
  Import javax.microedition.media.control.RecordControl;
  Import javax.microedition.media.control.VideoControl;

  Import net.rim.device.api.system.Backlight;
  Import net.rim.device.api.system.Bitmap;
  Import net.rim.device.api.system.Display;
  Import net.rim.device.api.ui.Field;
  Import net.rim.device.api.ui.MenuItem;
  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.component.BitmapField;
  Import net.rim.device.api.ui.component.ButtonField;
  Import net.rim.device.api.ui.component.EditField;
  Import net.rim.device.api.ui.container.HorizontalFieldManager;
  Import net.rim.device.api.ui.container.MainScreen;
  Import net.rim.device.api.ui.container.VerticalFieldManager;

  /*
  * Class for recording the video
  * Date: 05/10/2010
  *
  */

  SerializableAttribute public class RecordingUi extends form {}
      
  saving Boolean private volatile;
  Private player _player;
  Private RecordControl _recordControl;
  private VideoControl videoControl.
  private OutputStream outputStream = null;
  SocketConnection Private SqlConnection connection = null;
  Private boolean started = false;
  videoField private sector;
  Private boolean backLite = true;
          
  int i;

  public RecordingUi() {}
              
  Super (NO_VERTICAL_SCROLL);
  this.getMainManager () .setBackground (BackgroundFactory.createSolidBackground (Color.BLACK));
  setTitle ("video");
  i = 0;
                  
  ToolBarMenuButton.AddMenuItem (new StartRecording());
  ToolBarMenuButton.AddMenuItem (new StopRecording());
  addMenuItem (menuItem);
  {if(backLite==true)}
  new BackliteThread (m:System.NET.HttpListener.start ());
  }
  }
          
  private class BackliteThread extends Thread {}
            
  int i = Backlight.getTimeoutDefault ();
  int j = 1;
  public void run() {}
  do
  {
  If ((Display.getProperties)
  (& Display.DISPLAY_PROPERTY_REQUIRES_BACKLIGHT). = 0)
  {
  Backlight.Enable (true, I);
  }
  try {}
  Sleep (i);
  } catch (InterruptedException e) {}
  e.printStackTrace ();
  }
  I have = Backlight.getTimeoutDefault ();
  } While (backLite == true);
                  
  }
              
  }
          
  private class StartRecording extends MenuItem {}
              
  public StartRecording() {}
  Super ("Start recording", 0, 100);
  }

  public void run() {}
  Try
  {
  VideoRecorderThread newRecorderThread = new VideoRecorderThread();
  newRecorderThread.start ();
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  }
  }
          
  Class menu item to stop recording
                  
  private class StopRecording extends MenuItem {}
              
  public StopRecording() {}
  Super ("Stop recording", 0, 100);
  }

  public void run() {}
  try {}
  If (record! = false)
  {
  new StopThread (m:System.NET.HttpListener.start ());
  }
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  }
  } //End of the Stop Menu item
          
          
  Class for initialization of player and video recording and setting the Socket connection

  private class videorecorderthread extends Thread implements {PlayerListener}
              
  public void run() {}
  try {}
  Connection = (SocketConnection) Connector.open ("socket://192.168.1.86:1234;deviceside=true",Connector.WRITE,false);)
  outputStream = connection.openOutputStream ();
  _player = javax.microedition.media.Manager.createPlayer ("capture://video?encoding=video/3gpp&mode=standard");
  _player. Realize();
  _player.addPlayerListener (this);
  videoControl = _player.getControl ("VideoControl") (alarm);
  {if(videoControl!=null)}
  videoField = videoControl.initDisplayMode (Field) (GUIControl.USE_GUI_PRIMITIVE, "net.rim.device.api.ui.Field");
  }
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}

  public void run() {}
                             
  try {}
  _player.prefetch ();
  _player. Start();
  ErrorLog.addMsg ("player State =" + _player.getState ());
  Add (videoField);
  _recordControl = (RecordControl) _player.getControl ("RecordControl");
  _recordControl.setRecordStream (OutputStream);
  _recordControl.startRecord ();
  {if(Started==false)}
  started = true;
  Add (new RecordControlScreen());
  }
                                  
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  }

  });
                     
  record = true;
                      
  } catch (IOException e) {}
  ErrorLog.addMsg (try ());
  }
  {} catch (e MediaException)
  ErrorLog.addMsg (try ());
  }
  }

  ' Public Sub playerUpdate (a player, event in the chain,
  EventData Object) {}
  ErrorLog.addMsg ("Eventdata code" + eventData);
  ErrorLog.addMsg ("the event deliverred" + event);
  }
            
  } //End of wire recorder
          
          
          
  /*
  Stop thread to stop recording and frees the resources
  * Date: 05/10/2010
  *
  */
          
  private class StopThread extends Thread {}
              
  public StopThread() {}
                  
  If (_recordControl! = null) {}
  _recordControl.stopRecord ();
  ErrorLog.addMsg ("inside the wire of the judgment");
  try {}
  _recordControl.commit ();
  _player. Close();
  outputStream.close ();
  deleteAll();
  Connection.Close;
  record = false;
  started = false;
  backLite = false;
                           
  } catch (Exception e) {}
                          
  ErrorLog.addMsg (try ());
  }
                     
  }
  }
  } //End of off wire
        
      
  /*
  * Class of UI elements and display chat messages
  * Date: 05/10/2010
  *
  */

  class RecordControlScreen extends VerticalFieldManager {}
          
  See Boolean;
  Byte [] data;
          
  HFM HorizontalFieldManager;
  VerticalFieldManager value for money;
  EditField cat;
          
  onPlay private bitmap;
  offPlay private bitmap;
  onStop private bitmap;
  offStop private bitmap;
          
  Private BitmapField play;
  Private BitmapField stop;
          
  public RecordControlScreen() {}
              
  ErrorLog.addMsg ("inside RecordControlscreen");
              
  onPlay = Bitmap.getBitmapResource ("onPlay.png");
  onStop = Bitmap.getBitmapResource ("onStop.png");
              
  offPlay = Bitmap.getBitmapResource ("offPlay.png");
  offStop = Bitmap.getBitmapResource ("offStop.png");
              
  display = false;
  data = new byte [1024];
              
  HFM = new HorizontalFieldManager();
  VFM = new VerticalFieldManager();
  Cat = new EditField();
              
  play = new BitmapField (onPlay, BitmapField.FOCUSABLE |) ButtonField.CONSUME_CLICK) {}
                  
  protected boolean navigationClick (int status, int time) {}
  ErrorLog.addMsg ("inside the click of button");
  play.setBitmap (onPlay);
  Invalidate();
  try {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
                                  
  public void run() {}
  try {}
  ErrorLog.addMsg ("inside the run method of the click on the button");
  RecordingUi.VideoRecorderThread recorderThread = new VideoRecorderThread();
  recorderThread.start ();
  } catch (Exception e) {}

  ErrorLog.addMsg (try ());
  }
                                          
  }
  });
                              
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  super.navigationClick (status, time);
  Returns true;
  }
                  
  protected void onFocus (int direction) {}
  this.setBitmap (onPlay);
  Invalidate();
  }
                  
  protected void onUnfocus() {}
  this.setBitmap (offPlay);
  Invalidate();
  }
  };
              
              
              
  stop = new BitmapField (onStop, BitmapField.FOCUSABLE |) ButtonField.CONSUME_CLICK) {}
                  
  protected boolean navigationClick (int status, int time) {}
                      
  stop.setBitmap (offStop);
                      
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
                              
  public void run() {}
  ErrorLog.addMsg ("inside the run method of the click on the button");
  RecordingUi.StopThread stopThread = new StopThread();
  stopThread.start ();
  }
  });
                      
  Returns true;
  }
                  
  protected void onFocus (int direction) {}
  this.setBitmap (onStop);
  Invalidate();
  }
                  
  protected void onUnfocus() {}
  this.setBitmap (offStop);
  Invalidate();
  }
                  
  };
              
  HFM. Add (Play);
  HFM. Add (Stop);
  VFM. Add (CAT);
  Add (VFM);
  Add (HFM);
  }
          
  } //end of RecordControl Ui screen
      
      
  public boolean onClose() {}
  new StopThread (m:System.NET.HttpListener.start ());
  If (_player! = null) {}
  _player = null;
  backLite = false;
  _recordControl = null;
  videoControl = null;
  }
  Return super.onClose ();
  }
        
  Menu item to find errors
          
  MenuItem menuItem = new MenuItem("Errors",110,110) {}

  public void run() {}
                  
  UiApplication.getUiApplication () .pushScreen (new ErrorLog());
  }
  }; End of the Menu item
          
              
  }

  It worked. There were a few problems with my Simulator