OTHER USERS ARE SECURE

Similar Questions

• Windows 7 does not provide any warning if other users are connected to our computer on shutdown.

  We have problems when we close our main computer and break the network connection with others inadvertently connected users.  In researching the problem, we find a lot of people who want to disable the warning to farm.  Our problem is exactly the opposite, but the warning message before stopping.  The problem is frustrating currently our users who are unexpectedly fell and continue this bad practice strong risk of work lost and corrupted files.

  Please ask us about how do to Activate the warning as "that other users are logged on our main computer" before closing.  Thanks for any help.

  Assuming that you are referring to the management of an enterprise network:

  Post your question somewhere around here instead:

  http://TechNet.Microsoft.com/forums

• Stop message: other users are connected

  Sometimes, when I stopped, I get message another user has logged in and asks me if I want to firm.  I don't have other users put in place on my computer.  Why does this happen?

  Hi, N Miracle,

  When the message is displayed, press key flag windows + L to see the list of users

  You will see a locked username and other user or to change user names

  You have another user account "switched users" but do not log on?

  Disconnect from all accounts

  How to know who is connected on my machine.

  http://www.ehow.com/how_5799669_out-logged-machine_.html

• Regularly being expelled of the network despite other users are OK and internet works fine. Once launched, can join only if the router is restarted.

  Hi all

  I use a Packard Bell laptop and you connect via my PCI-E NIC Realtek RTL8192SE Wireless LAN 802.11n chip. As the title says, my network connection drops every hour 1-5 or so and once that he can't not reconnect until I have reset the router (superhub Virgin Media). It's obviously very disturbing other people in my house (we have more than 20 devices on the network). I tried to solve the problems and search but to no avail.
  List of problems and possible causes:
  -Sometimes after the reset of the router I and other members of the House will get a message saying: "Windows has detected an IP address conflict, please contact your network administrator." I presume that was the problem but I tried to use a static IP address out of the reach of all other devices and booking a lease on the router configuration that gave me the IP address I booked, but I was always began after a matter of a few hours.
  The event logs are shown in their order of appearance:
  Event ID: 8033

  Description:

  The browser has forced an election on network \Device\NetBT_Tcpip_{EE16D38E-6891-40EE-AC88-36E621199DF8} because a master browser was stopped.
  Event ID: 4199

  Description:

  The system detected an address conflict for IP address 0.0.0.0 with the system having the hardware address 00-00-00-00-00-00 network. Operation of the network on this system may be disrupted as a result.
  Event ID: 7042

  Description:

  The computer browser service has been successfully sent a stop command.

  The given reason was: 0 x 40030011 [OS: network connectivity (planned)]
  Event ID: 7036

  Description:

  The support TCP/IP NetBIOS service entered the stopped state.
  Generally, the problem seems to be the TCP/IP NetBIOS being stopped, but I changed all the power settings which would result in the browser of the computer stopping. Originally the error codes for the logoff were entirely event 4199 but some tweaking has stopped this error message displayed as often.  Sometimes the error code 4199 does not appear in the event logs when the connection is dropped, leading me to think that this is not like a problem. I could very well be wrong.

  Hello

  Check out this site
  http://www.EventID.NET/display.asp?a...s&EventID=8033

  The 8033 event don't would be not the cause of your connection dropped, but rather the result of it. I guess you lose your connection, the laptop is unable to contact the master browser, and if she chooses a new master browser (himself). For more information on how this works a check out Microsoft How Computer Browser Service Worksdocument.

  What are the events preceding the 8033? You have a 4202? Description is:

  The system detected that network adapter
  \DEVICE\TCPIP_{0E5CF2F9-A3AB-488E-997D-87C59FB17453}
  was disconnected from the network, and the
  adapter's network configuration has been
  released.
  
  

  Looks like you are using a wired and not wireless. When your connection drops, you lose your link light? If the link light is on, I'd want to reinstall the NIC driver or maybe reimage the laptop. If the link light is disabled, I would look on the side material more closely. Are laptops that work the same model?

  If you look at your diary of events, how many times do you have the 8033? It always happens at the same duration and/or frequency, or is it pretty random?

  This seems to be a strange conicidence with the ringing of the phone. It seems that events are the normal sequence in final display turned off power hibernation mode and "standby mode". It would still be nice to know where I can watch the codes as the Type of Source of Wake (3), partner attributes (82432) and error Code (0 x 40030011). I found a few sites that partly explain the codes, but not them.

  How to resolve conflicts of duplicate addresses media access control . This article explains the different methods by which you can follow to the bottom of the machine that is the origin of the conflict. Click here to see Microsoft Knowledge Base Article 164903 at http://support.microsoft.com/kb/164903.

  In addition, you can run in a situation where you notice that the conflict comes from a system where you have never changed the TCP/IP configuration. In this case, this problem appears randomly and disappears on its own. One of the possible reasons for this behavior could be corruption of ARP cache on the switch to which the two machines are connected. To avoid this problem in the future:
  1. Make sure that both systems have the latest version of the NETWORK card drivers and utility (if installed) Network Configuration.
  2. Make sure that the latest Firmware is on the switch. Check the switch for possible corruption of the ARP cache.

  To resolve this issue, you must determine which other computer on the network is using the same media access control address. Several tools shipped with the stack of Microsoft TCP/IP allows you to locate the computer address duplicate.

  To isolate the double media access control address, perform the following steps:

  Since a client TPC/IP based work:

  1. Ping the TCP/IP address is located in the registry entry from a command prompt by typing the following:
     PING 129.0.0.1

     You should get back responses similar to those of the duplicate addressed computer:

           Pinging 129.0.0.1 with 32 bytes of data:
     
           Reply from 129.0.0.1: bytes=32 time=10ms ttl=128
           Reply from 129.0.0.1: bytes=32 time=<10ms ttl=128
           Reply from 129.0.0.1: bytes=32 time=<10ms ttl=128
           Reply from 129.0.0.1: bytes=32 time=<10ms ttl=128
     

  2. To know the computer media access control address is the duplicate, type the following at the command prompt:
     ARP - a 129.0.0.1

     You should get a response back as follows:

           Internet Address  Physical Address
           129.0.0.1 02:A0:8C:DE:00:FD  <-- matches the event log entry
     

  3. We can now use NBTSTAT to get the NetBIOS (friendly) of duplicate computer name by typing the following at the command prompt:
     NBTSTAT-A 129.0.0.1

     You should get a response back with the NetBIOS name of the computer. This NetBIOS name to determine who is the owner of the computer so that you can locate it on your network.

        NAME             TYPE               STATUS
        -----------------------------------------------
        NTSERVER1           <00>                Unique
        DOMAN-NAME          <00>                GROUP
        NTSERVER1           <03>                Unique
     
        Media access control address = 02-A0-8C-DE-00-FD
     

     If you receive a message:

     HOST NOT FOUND.

     This seems to indicate that the computer to double is not an active NetBIOS computer as a server, Novell, Unix server, router or maybe a Jet Direct printer.

  4. When you have found the computer sent duplicate, you can replace the network card, or if a locally administered address (LAA) control media access, change it to be unique on the network.

  Changing a LAA can be accomplished as follows:

  1. In Control Panel, double-click the network icon.
  2. While viewing the properties of the network card installed, change the properties or the configuration of the UVG to network adapters installed to use a unique LAA.

• received a message that other users have logged on to my computer

  When I rebooted my computer which i rarely stop/restart, I received a message stating that the other users are logged on and I wanted to go forward.  There should be no one else except my admin account & a guest account. I ran MS Security Scan which found nothing. Should I be worried? Should I do something else?

  My computer is a Gateway desktop computer around the age of 20 months, under Vista 64-bit, do not know what other information you might need.

  Hello

  · The guest account is disconnected?

  Disable the account invited on the computer and check the results. You can check the link: enable or disable the guest account the: http://windows.microsoft.com/en-US/windows-vista/Turn-the-guest-account-on-or-off

  Also, make sure that you update the security software installed on the computer.

• Hear sound other users on my account

  Hello, I share my computer with my children and we have open simultaneously accouts.

  The problem is when someone has an open website that makes noise, this noise is heard on other accounts.

  How can we define Windows to turn off the sound from the activity of other users?

  Hello amal, thank you for your response. Unfortunately (again), do as you say the sound of other users are disconnected but this is my sound. Reactivate my account restores the sound of all users.

  (1) is it because I'm on 7 not Vista? (Sorry mГЄlГ in the creation of the question)

  (1) nope

  You can't mute a user account, so just turn off the sound on this program and Web page when you leave the account

  teengeek.freehostingcloud.com

• I have a problem with the guest account, defined as the administrator and other users as standard.

  Original title: "Guest account" is defined as an administrator and other users are standard. Unable to create new accounts or edit the ranks.

  Hello.
  I have a Dell INSPIRON 1545
  Windows 7 Home Premium

  Somehow my "guest" account that you can toggle is administrator.
  my other 'Ordinary' user is a standard user and I can't do the promotion.
  Because this "guest" account is Administrator I can't ' create new accounts / change accounts / disable comments / CMD refuse orders. "
  "I don't have the"windows drive"so there is no need to restore my windows / safe mode does not help either.

  I read a thousand threats and issues on this topic but nothing helped me.

  Help, please!

  to be honest I don't know if the administrator account is enabled.

  You have fallen into a popular trap, the trap of not plan and create an alternative emergency admin account, even if you have a spare emergency House key. It's now cause you a lot of grief. If the problem occurred recently, then you can resolve as follows:

  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Invoke the system restore to configure Windows to a point before the problem occurred.
  3. Plan in advance and create, test, and document this absolutely essential spare admin account.

  If this does not work then send me a note (pegasusDOTfnlATgmailDOTcom).

• Cannot download Microsoft Works Suite because "there are other users logged on to this computer"

  I tried to launch MS Money which is part of Microsoft Works Suite, after the upgrade to Windows 7. Neither the 'I agree' button appears when you try to install the software.

  The following message appears: "there are other users logged on to this computer.

  "If you install or remove a program or change the installation of a program so that another user is running, it, there can be problems with the installation.

  "To properly install, change or remove a program, click Cancel, and then switch and disconnect each user." Rerun the Setup program. »

  I had installed Windows 7 but I had no problem but I have used a password. However, I could not recover files from a backup. I ended up doing a clean and try installation again, but without success. This time I do not use a password, because there is only a single user. How can I solve this problem? Help, please.

  Install the appropriate version of money for your location from the following:

  • Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available athttp://www.microsoft.com/download/en/details.aspx?id=26922
  • Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915
  • Money 2005 French - QFE3 (the fixed French Money 2005 autonomous file) can be downloaded from the link in http://www.microsoft.com/downloads/fr-fr/details.aspx?FamilyID=60352051-f614-4aef-9ce3-36370a329c09
  • US Money 2004 Money 2005 and later the United States users, use silver bed from Sun. See http://www.microsoft.com/en-gb/athome/microsoft-money.aspx and http://support.microsoft.com/kb/2118008.

  Note that the American Money 98 users... Money 2003 may use an additional step, described in http://support.microsoft.com/kb/919524/en-us, of first installation of the US Money 2004 or 2005 in the first instance to perform a conversion of files before installing Money sunset.

  If you open an existing Money data file secure with a Windows Live ID, disconnect from the internet and remove the Live ID. Next, install a password to protect the file.

• All my folders are shared with other users and Vista won't let me stop sharing. Help, please

  All of my documents folders are automatically shared with other users and I can not change when I try to change, I get "you can not stop sharing the selected folder.

  I changed the ownership of this files but still not able to stop sharing.

  Try this.

  Right click on one of these files > select sharing with > select person.

• How to create mailboxes for all the users are in other areas

  Hello
  I have several domains that they are separated from Forrest
  One of these areas installed Exchange server 2010
  Between all the areas I have created as a one-way trust
  How can I use the commands that all the users are in other areas, they connected the box the letters in my field and use the Exchange
  There is a command to create the mailboxes allow users are in my area

  (Get-user |) The value of Enable-mailbox-database)

  But in other areas, users are required to create the linked mailbox

  What is the command?

  Please repost your question in the Group of Discussion Administrative Microsoft Exchange at: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.exchange.admin&cat=en_us_918744ab-010e-4f16-9665-fe376f2631e4&lang=en&cr=us where the Exchange experts will be more than happy to asist you with your problems.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I turn on my computer, already set up profiles disappear and are replaced by 'Kiosk' and 'other users' options that require passwords. I can get into 'other users' and find my previous user accounts, but lose them again after the reboot.

  I bought a laptop with Windows 7 installed a few days ago. I started to set up user accounts, administrator and a guest. So far, I had been able to shut down and restart with the accounts of users even reappear. I turned on my computer and two 'user accounts' had replaced my previous. Named "kiosk", which requires a user name and password which I do not have access, and one named 'other users' that requires a user name and password. I type in comments and no password and then I can access the guest account. When I disconnect my administrator profile is available next to my usual guest account. Restart the "kiosk" and "other accounts" reappear. If it's any help, as soon as I put on my computer, I had named MDX kiosk and administrator accounts. I deleted the account kiosk MDX. I don't know if this is related at all. It is not necessarily a problem, but a disadvantage however and I panicked when this popped up on my computer.

  Yes, you can uninstall MDX (it is called the digital experience of Microsoft) and it will remove the kiosk account and no trace of it, and then restart your machine. All other accounts on the machine should stay, but I would like to make a backup first. This should solve your problem. Associated with the store, you bought from should have done that for you, why they failed, I have no idea (we are instructed to do before the release of the machine to customers). If you don't mind asking me, where did you buy the machine?

• Having a problem of permissions with users being able to send agreements to other users. The org is an open R/w model of sharing. So, everyone should be able to access all agreements - but they get insufficient permissions error... All users are associate

  We use Adobe Document Cloud - esign wthin our instance of Salesforce.

  When I log in as another user and try to choose another agreement on a budget for an Oppy (owned by another user) no other users can open the agreement to send the signature...

  Can't find the problem here?

  All user profiles has R/W on all the related objects and sharing of OWD is R/W for all objects...

  All users are in the same group within the DC account.

  Any ideas?

  Thanks SimonATS. We have this problem resolved. However, now I'm getting the following webservice exception when you try to send a document-

  The call to the web service call EchoSign to send an interactive document returned an error message "cannot send user name: [email edited] (apiActionId = 4SXVHTQNXR2RX8B)' and the error code"EXCEPTION.

  The call to the web service call EchoSign to send an interactive document returned an error message "cannot send user name: [email edited] (apiActionId = 4SXPQA3W3P5V6HX)' and the error code"EXCEPTION.

• Why all my music photos and videos are empty in my windows media player? But other users on the pc have my stuff? all my libraries are empty, why is this?

  When I click on my icon of windows and run my mouse over the photos, documents, music, videos it shows empty &, but other users on my pc have all my stuff - why this? Why can't I find my stuff in its original location?

  Hi Stacie,

  1. how many user accounts that you use?

  2. do you have administrative privileges for the current user account?

  3. have you made changes on the computer before this problem?

  Follow the mentioned methods:

  Method 1:

  Run Windows Media Player troubleshooting utility library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Add the folder to the library:

  Follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/include-folders-in-a-library

  Add items to the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-library

  I hope that the above information is useful!

• How to block other users to access your folders in user name?

  For my own personal safety

  How can I block my user name folders of other users on my computer and my network without my account corrupt on me?

  I tried to do for some time now, and somehow something always corrupts on me.
  First of all, I went into my username, properties, security and denies access to anyone else, but then I somehow, it corrupt on me.
  So I have that challenge by creating a new account and transferred all my data on the
  Then I have my new username of another user account click right and shared with anyone...
  but then I couldn't access it either so I unstapled who.
  Now, I'm at square one...
  Can someone help me please?

  Unfortunately, they are admins and Yes at the start they received rights but is there a way I can cancel that...

  and that is how should I go about setting up as the encryption?

  Third, they don't go as deep into the search for something. The problem is, if its there they go out. If not, no probs. So, how can I block em to get addition by clicking on properties and set the folder that hidden?

  If they stay admin users, nothing you can do other than encryption technically.  And if they go poking around and either don't know what they do (or do and are cruel) while they could spoil encrypted files you have and your ability to access them once again (unless you are wise enough to save the external encryption key).

  All you have to do is enter and change their user accounts to Plains old standard users instead of administrators (account type).  They will no longer be able to go anywhere on the computer, they will not be able to install things - the scale of the system and it is possible that some things might stop working for them depending on how some programs installed.

  If it were me - I create two administrative accounts, password protect and remove all others of the Administrators group.  No one should use the computer every day as an administrator.  (Why two?  In case one becomes corrupt or something else happens).

• using the admin account to create shortcuts in folders of other users

  Is it possible to be able to edit other users of data such as creating a shortcut for them without having to restart the computer? The same happens for messing around in Program Files, Program Files (x 86) or the Start Menu.
  I'm looking forward and a simple operation that used to take seconds XP is a bread PITA in Vista and 7 because I now need to log in as administrator, disable UAC, restart, wait, you connect again as the admin, my simple management operation, re - enable user annoyance control and then restart it again.
  What used to take 2 minutes now takes 10-15 minutes because of all what to expect as the computer to reboot and let me, connect.

  Am I missing something? A way to drag some files where I want to make a shortcut and you NOT say "Windows cannot create the shortcut you want here. Do you want to put me on the desktop instead?

  I'm supposed to be the administrator, these things really annoy me. UAC is useful to raise my usual account, but it's really annoying when it blocks the admin to do something. At least, it could give an admin logged in as the administrator the opportunity to do what he wants to do when messing around with files and folders. Even an annoying "are you sure?" would be better than being completely blocked.

  If there is a way to do it, let me know. I'm not talking about 'doing the shortcut on the desktop, then copy it where you want', I want to just open an Explorer window and be able to do what I want, as I often need to perform multiple operations and the delay being the guest for everyone is really annoying and slows me down.
  Especially when I compare it to Windows 95, 98, 98SE and XP, I've done this sort of thing with extensive experience.

  Especially when I compare it to Windows 95, 98, 98SE and XP, I've done this sort of thing with extensive experience.

  Windows9x version boosted BACK with only laughable security restrictions, it is not a good argument in support of your complaint. Your problem is caused by UAC, which was introduced in Vista. You can work around it by running Windows Explorer under elevated as follows:

  1. Start an elevated command prompt.
  2. Kill explorer.exe from this command prompt.
  3. Explorer.exe from this command prompt.

  You can now use Windows Explorer to access the folders of other users.