OTP-S390: Invalid Format

Similar Questions

• HDMI to TV: invalid format

  When I connect my Pavilion dv7 to the lcd TV LG with HDMI to the TV says "invalid format".  The sound works. How can I get the TV to show what is on my screen?  It worked fine until about 2 weeks ago.

  I have already tried:

  1 installation of the last Center ACTED catalyst

  2. change the screen resolution

  3. make the laptop is configured for double or projector display

  4. how to get the latest graphics driver ACTED

  5. turn off the TV and laptop and reboot before and after having connected an HDMI cable.

  It is a laptop problem, not a problem of TV. The TV is grateful that it is connected to the laptop (if I use F4 to return to the display only, the message "invalid format" TV changes to 'no signal'.)

  Hello

  What is the native resolution of the TV? Please check this:

  http://oracleappstechnology.blogspot.com.au/2008/12/invalid-format-on-HDTV-on-connecting.html

  Kind regards.

• Download "invalid format" on the computer connecting HP TV to the tv screen.

  Original title: hp pavilion g6 does not connect to the tv via a hdmi cable. (Tv says 'Invalid Format)

  Hi, im trying to connect my computer to my TV using a hdmi cable and I change the resolution of the screen, and it still says "invalid format" on the TV screen.

  Hi, in pot

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks like the resolution is not correct when you connect the computer to a TV.

  I have these steps that should help you with this problem.

  Visit this link and indicate "connect your computer to your TV.

  Hope this information helps. Answer us queries windows and we will be happy to help.

• Blu - Ray building error: "invalid format", Code 13 - Please help to diagnose this problem!

  Hi all

  I have a yet simple project that is successfully burning a dvd, image file and the dvd folder.  Now, I want to do the same thing except build the project for a blu - ray release.  (Video files source I have are hi-def).  I don't have a blu - ray burner, but I still want to produce a blu - ray disc image file and a folder of blu - ray disc as in the future when I get a blu - ray burner, I can simply burn the image or folder on the blu - ray disc. I use Encore CS5.5 in windows 7.

  Then, I put the project of construction of blu - ray image file and I get the following error:

  "Blu - ray error:"Invalid Format", Code 13, Note:" errors in some GSP: the end time of the previous display is set on near beginning to succeed all the display, see the log for more information "."  I get the error even though I am trying to build a blu - ray folder.  I also tried this construction project on a Mac (also with CS5.5 Encore), but get the same error.  How can I fix this error, or is anyone know what could be the problem?  the menu of the dvd I have is simple: 2 menus, 1 audio stream, subtitle 1, 1 main video stream and 2 videos of little "trailer".

  (I can sand anyone track log if you want it to)

  Thank you!

  Ricky Roma

  Hi - I think I have fixed the problem.  Basically, I found that some of my subtitles were too close together and so I have separated by 5 images 'standards' apart and all built very well.  We hope in the future if anyone else has this error, they can find this message and try this solution.

  "BTW, does anyone know if the rule of subtitle ' 5 frames apart ' for subtitles adjacent is just one more thing from adobe, or all the professional authoring software require the same thing?

  Thanks for reading this post.

  RickyRoma

• Get "... a file and invalid format." (Error no. 11) "when you import the .tdms file in DIAdem 11

  I developed a script to process the .tdms file in DIAdem 11.1, now I deploy the script on the same PXI system that created the .tdms file.  This system had DIAdem 11.0, but when I try to open (DataFileLoadSel) the file tdms in my script, I get the error message:

  "D:\MyFileName.tdms" has a format invalid gall.  (Error no. 11)

  Tdms files are created by a LabView application.

  If I delete the index correspondin .tdms file, I get a little further, it loads the first two of the four groups, using DataFileLoadSel on the first group and DataFileLoadRed on the 2nd group, the third group, another DataFileLoadRed, I get the following error:

  Error in (line: x,: y):

  Unable to load the 'D:\MyFileName.tdms' file with the charger "TDMS.

  Additional information:

  Cannot open the file 'D:\MyFileName.tdms '.

  Is there a difference between DIAdem 11.0 and 11.1 affecting the .tdms file import, if I can get around it?

  Thank you

  Eric

  Hello eberg,.

  Before we get into more detailed error recovery, could you please try to install the format TDMS 2.0 on the computer of DIAdem 11.0 (DIAdem 11.1 and LabVIEW 2009 come with TDMS already installed 2.0 stuff).

  Hesitate not to download it here: http://zone.ni.com/devzone/cda/tut/p/id/9995

  Once installed, please try to run the Scripts (in DIAdem 11.0) and let us know if that fixes the issue. He could not help to install this, but it's a quick thing to try before dig us more deeply into the question.

  Best regards

  Otmar

• Xbox360 video on screen says invalid format

  My xbox360 was working fine, then there was an update and online, I installed and I played a little and then all of a sudden on my HD TV screen went black and a notice FORMAT INVALID tossed on the creen. How can I return my video? BTW I have sound

  Hi Joseph.interdonato,

  ·         What version of Windows is installed on your computer?

  You can search for connections to the xbox 360 and also check if the physical connections are in place.

  I suggest to read the following article and check.

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "failed to connect".

  http://support.Microsoft.com/kb/932163/en-us

   

  You can also contact Xbox support for help.

  Xbox support

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/home?XR=shellnav

   

  I hope this helps.

• OTP-S390 is not working through HDMI on my Sony KDL55EX710 TV. Works fine on another TV (naxa) via HDMI

  I just bought a BDP - S390 Sony BluRay player.  When you are connected via HDMI to my TV Sony KDL55EX710, the BluRay logo appears and then the signal is lost.  My old player of Blu - Ray (Panasonic) has played fine is not the TV.  I also connected the BDP-S390 to my TV in the bedroom (naxa) via HDMI and it plays very well.  What is going on?  All products Sony shouldn't work with them?  I hope I don't have to return this player.

  Hello
  Welcome to the community of Sony.

  You can try the following troubleshooting steps.

  Press the STOP button on the BD Player for more than 10 seconds to reset the resolution of video output to the lowest resolution and check if it helps.
  Also, be sure that the 'video output Format"is set to"HDMI"of the configuration [screen settings].
  If the problem is still not resolved,

  Turn off player and unplug the power cord from the electrical outlet.
  Allow the unit to remain without electricity for one minute and then, plug it into the power outlet.
  Turn off the TV, unplug it from the power outlet and plug it back again after one minute.
  Disconnect, then reconnect the HDMI cable.

  If my post answered your question, please mark it as an "accepted Solution".

• Content acquisition Internet problem with OTP-S390

  I recently bought a BDP - S390 Internet Blu - ray player. I'm unable to access Netflix, Hulu, Pandora, YouTube, etc. The player exceeded all by performing the ' absorbing Internet content...» (3/3) "step which is necessary to obtain a registration code to enable internet video services. Customer support says it's the result of my slow internet connection, which is ridiculous because the iPhone 4 in my household have no problem in streaming + Hulu, Netflix, Pandora, and Youtube. The player can access the internet. I have verified this by navigating with success on the web and run the network diagnostics which showed the link was 'OK '. Anyone know of a possible solution for this problem?

  Hello Michael,

  If you have access to video services like Hulu, Pandora, Internet then you should not register the player in the Web Essentials My Sony site.

  Test the speed of the Internet being used from the link below.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1013044

  Internet connection speed minimum of 2.5 Mbps or greater is required for the standard definition (SD) programming and 10 Mbps or higher is required for programming in high definition (HD).

  Internet high speed may be affected, if others in the House use a computer to view movies, perform large downloads or play games online.

  Update the Firmware from the link below:

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=BDPS390&template_id=1&Region_ID=1&tab=download#/down...

  Reset the modem or cable router by unplugging the power cord from the electrical outlet for 1 minute.

  Do a factory reset for 3 times:

  1) press button on the supplied remote control.

  (2) select settings (brief case icon).

  (3) select Reset.

  (4) select Reset to Factory Default Settings.

  Configure network manually from the link below:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1025439

  Please mark it as "acceptable Solution" If you find this information useful.

• OTP-S390 - issues with Amazon instant video bonus?

  For 2 weeks now, I think that after the update to the newest firmware, I have massive problems play via the video player Sony Bluray with Amazon premium instant stuff.

  I did some troubleshooting and I came to the conclusion that it is either the cable going to the focus in my cable modem or the drive itself.

  I can read the same videos very well without any problems on my computer on the same internet connection which provides the connectivity of Bluray player.

  The real problem is I'll watch a show, in this case, Fringe season 2 in HD - and it stops just at random play. I can stop and start from where I left and it will either work or it won't. But I can go right to my PC and launch an episode and watch it completely thorugh without problem.

  It's going to be a fix for this anytime soon? Is anyone else having problems?

  Hi Chris,

  Welcome to the community of Sony!

  Make sure that this latest firmware update has been installed in the Blu - ray player, because it can improve the performance of the Internet functions. You can find information about the last update of firmware in the Sub page:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=BDPS390&upd_id=7741&os_group_id=6

  Also, try the steps on the below technical support article:
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/33377

  In addition, this problem has been reported to occur with certain movies from Amazon Video on demand (VOD) that are more than 202 minutes in length. Movies stop playback after 202 minutes. According to Amazon, the problem is caused by the way that video content is encoded. Amazon is being contained affected re-encoding.

  If the problem persists, try to remove the link and reprint of the Amazon of the Blu - ray player links. Steps are mentioned on the technical support article below:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32177

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32066

  If the problem is not resolved, I suggest you contact Amazon support team.

  If my post answered your question, please mark it as "accepted Solution".

• OTP-S390 offering not MLB. TV

  Y at - it an upgrade of the software that will add additional applications for my drive model or I have to upgrade the device to get MLB. TV service on my Blu Ray player?

  The MLB. TV app is currently only available on readers of 2013 BD and BD home theater systems in the United States and the Canada.

  Unfortunately, the latest version of the firmware of the player does not MLB. TV application.

  If my post answered your question, please mark it as an "accepted Solution".

• Invalid alias Format: Table_name. Column_name required error

  Hello
  
  Here's the query I use in one of my columns in a report. The ELSE part works fine. but as soon as I put in the first 2 to WHAT conditions, it is for me the invalid format alias error. tried to change the names of columns, the single quotes on the numbers, but the error does not appear to go.
  
  Help, please.
  
  Thank you
  Dan
  -------------------------------------------------------------------------------------
  
  CASE
  
  WHEN FILTER ("made - investment". "" FTI_FAIR_VALUE_AMT "USING"Quarter". "" FISCAL_YEAR ' = @{YEAR} AND "quarter". ("' ACCOUNTING_PERIOD ' = @{PERIOD}) IS NULL THEN FILTER ("made - investment". "FTI_FAIR_VALUE_AMT" by USING "Quarter" "." " FISCAL_YEAR' = @{YEAR} - 1 AND "quarter". ("" ACCOUNTING_PERIOD "= 12)
  
  
  WHEN FILTER ("made - investment". "" FTI_FAIR_VALUE_AMT "USING"Quarter". "" FISCAL_YEAR ' = @{YEAR} - 1 AND "quarter". ("" ACCOUNTING_PERIOD "= 12) IS NULL THEN FILTER ("made - investment". "FTI_FAIR_VALUE_AMT" by USING "Quarter" "." " FISCAL_YEAR' = @{YEAR} AND "quarter". ("' ACCOUNTING_PERIOD ' = @{PERIOD})
  
  ON THE OTHER
  
  FILTER ("made - investment". "" FTI_FAIR_VALUE_AMT "USING"Quarter". "" FISCAL_YEAR ' = @{YEAR} AND "quarter". ("' ACCOUNTING_PERIOD ' = @{PERIOD})-FILTER ("made - investment". "" FTI_FAIR_VALUE_AMT "USING"Quarter". "" FISCAL_YEAR ' = @{YEAR} - 1 AND "quarter". ("" ACCOUNTING_PERIOD "= 12)
  
  
  END
  
  Published by: Danny on June 4, 2013 12:44
  
  Published by: Danny on June 4, 2013 12:44

  can share you the error message?

  (@{PERIOD}') IS NULL

  I don't think that it is valid here

  Check this http://www.cool-bi.com/Tweaks/AllColumnValues.php
  to validate the value NULL for the PS Variables

  Published by: Srini VIEREN on June 4, 2013 15:17

• Invalid alias Format: Table_name. Required column_name

  Hi all
  
  I'm new to OBIEE 11 g and I'm trying to get used to the many it in one shot. I was hoping that someone could help me to answer this question.
  
  I am trying to replace a value in the database and replace it with a different value if a condition is met. I use below the SQL to get there, however, when I select ok I get an error message: Invalid Format Alias: Table_name. Column_name required.
  
  Can someone tell me how I can accomplish my taskl? I am currently using OBIEE 11 g and I am changing the measure of the column by changing the formula with the code below. Let me know. Thank you.
  
  
  
  Select
  CASE
  "WHEN the claim Cmplt - deal Time.Claim Date < 10/30/2010 AND October 30, 2010"
  END
  A claim Cmplt - treat Time.Claim Date;

  Oh... the problem is with
  Cmplt claim - process Time.Claim Date it suppose to be like
  "Cmplt claim - execution time. "" Claim date. "

  The condition below is good to use too
  -case when 'Cmplt claim - time process. "" Claim date. "

  Pls mark as correct/good

• Object format invalid error Code 14 of the Blu - ray 0 x 00010402 not valid resolution

  Hey guys,.

  really need help here burn my blu - ray

  There is an error msg saying

  Purpose of Blu - ray: ' < Button > error: 'Invalid Format', Code: "14" Note: 0 x 00010402 no valid, graphic resolution must be at least 8 pixels, but no more than 4096 pixels in height and width Spec 9.14.4.2.2.2.1.1.1.

  He finished transcoding all until right when it will burn this error msg appears.

  Any help would be great.

  Thanks in advance!

  The solution: If you use a model of the internet or the library, when you edit in photoshop, you must let the background checked and it just put the new image. The problem is not with the buttons. The problem is in the background. In order to not turn off the bottom of the models, just put a new on it.

• Loss of connection on all the players of the OTP

  We just noticed this today. All players (BDP-S390, S3200, S3500) faced this problem.

  Does anyone know if they do a server maintenance, or are simply down?

  All players show the connection is OK, but no real connection that passes at all.

  They all present connection errors when you try to access any application.

  OTP-S390 & S3200 on WIRED, S3500 the wireless.

  They all worked perfectly yesterday.

  Thanks for any info/help.

  
  

• I have a bluray BDP S390 and cannot connect to Netflix

  I'm unable to connect to Netflix through my OTP S390 Blu - Ray player. Error message says unable to connect to the network.

  Hi DanLessard!

  You can follow this link if you get network error or cannot access the network to view or listen to Internet content.

  If my post answered your question, please mark it as "accept as a Solution.