out of memory (again!)

Similar Questions

• Error when you try to play hearts: the system is out of memory. Try closing some applications and try again.

  Critical error: hearts

  When I play the game hearts, I now get a critical error. This only happens with this game. The error is: "the system has run out of memory." Try closing some applications and try again. "I have no other applications open. "Anyone encountered this? My curren operating system is Vista.

  Hello

  Step 1:

  You can change the size of virtual memory and check if the problem persists following the steps from the link
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Step 2:

  Also refer to Dave_D suggestion from this link: http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/28b875ff-b51a-40ec-a416-888f0595ec42

  Step 3:

  I also suggest you clear the game on the computer, restart the computer, then turn on the game and check its operation. Follow the link for more information:

  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Hope that information was useful

• iMac to run out of memory system [Etrecheck report]

  I have an iMac 2013 end (27-inch, 3.2 GHz i5) with 24 GB RAM installed running OS X El Capitan 10.11.5). Whenever Safari is open, it slows down gradually until I get a message "your system is out of memory the application" and several applications have been suspended. I tried to reinstall the OS X without result.

  Once a report of Etrecheck indicates failure Drive with 19 errors, I contacted the Apple Support. The tech support guy was not familiar with Etrecheck, but don't think it was a defective drive. He had me DOWNLOAD & running Malwarebytes (did not find anything), create a Test user (which looked OK) and accompanied me through the removal of the caches in the library in my own user (which seemed to work for a while). He seemed anxious to finish my problem, so I let it go. Then he started to slow again. Subsequent reports of Etrecheck showed still drive failure but with only 2 to 5 errors. Now the drive seems fine.

  Safari seems to be the cause. I deleted several tabs and off most of the extensions, but it did not help.

  Here is the current Etrecheck report:

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-07-21 13:51:27

  Download EtreCheck from https://etrecheck.com

  Time 03:28

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  Short memory of the application system

  Hardware Information: ⓘ

  iMac (27 inch, at the end of 2013)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac14, 2

  1 3.2 GHz Intel Core i5 CPU: 4 strands

  24 GB expandable RAM - [Instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  0/DIMM1 BANK

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n/ac

  Video information: ⓘ

  NVIDIA GeForce GT M 755 - VRAM: 1024 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 999,35 (Go 194,50 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  VIA Labs, Inc..          USB3.0 hub

  VIA Labs, Inc..          USB3.0 hub

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  VIA Labs, Inc..          USB 2.0 hub

  VIA Labs, Inc..          USB 2.0 hub

  SanDisk ImageMate 8 in 1

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Easy VHS to DVD/Easy VHS to DVD Capture.app

  com.elgato.driver.Pluto2 [no charge] (1.1 - 2012-01-19) [Support]

  / Applications/Easy VHS to DVD/Toast 9 Basic.app

  com.roxio.BluRaySupport [no charge] (1.1.6 - 2012-01-19) [Support]

  com.roxio.TDIXController [no charge] (2.0 - 2012-01-19) [Support]

  / Applications/Parallels Desktop.app

  com.parallels.kext.hidhook [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

  com.parallels.kext.hypervisor [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

  com.parallels.kext.NetBridge [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

  com.parallels.kext.usbconnect [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

  com.parallels.kext.vnic [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

  / Applications/Toast Titanium/Spin Doctor.app 11

  com.hzsystems.terminus.driver [no charge] (4-19 - 01 - 2012) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 153 tasks Apple

  [operation] 78 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 154 tasks Apple

  [operation] 90 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-03-08) [Support]

  [operation] com.amazon.sendtokindle.launcher.plist (2015-11-13) [Support]

  [operation] com.epson.ecrp.launcher.plist (2015-06-28) [Support]

  [loading] com.epson.esua.launcher.plist (2016-03-28) [Support]

  [operation] com.epson.eventmanager.agent.plist (2012-05-08) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-28) [Support]

  [loading] com.google.keystone.daemon.plist (2016-07-11) [Support]

  [loading] com.malwarebytes.HelperTool.plist (2016-07-16) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2016-01-07) [Support]

  [failure] com.lastpass.LastPassHelper.plist (2016-07-21) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application own memory (memory Clean.app/Applications /)

  Other applications: ⓘ

  com [running]. GoPro.GoPro - importing

  [performance] com.bloombuilt.dayone - mac-agent

  [ongoing] com.etresoft.EtreCheck.1096352

  com.fiplab.MemoryCleanHelper [loading]

  [ongoing] com.fiplab.memoryclean.1095392

  [loading] 390 tasks Apple

  [operation] 200 tasks Apple

  Plug-ins Internet: ⓘ

  JavaAppletPlugin: 15.0.1 - 10.11 (2016-02-15) check the version of the SDK

  FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-15) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-05)

  Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-15) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-05)

  nplastpass: 4.1.2 - SDK 10.11 (2016-07-21) [Support]

  GarminGpsControl: 4.2.0.0 - SDK 10.8 (2014-03-31) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-03-26) [Support]

  iPhotoPhotocast: 7.0 - 10.7 SDK (2012-04-07)

  User Plug-ins internet: ⓘ

  Web of Google Earth plugin: 7.1 (2013-10-07) [Support]

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-21)

  DuckDuckGo - DuckDuckGo - http://duckduckgo.com (2015-07-11)

  Open in Internet Explorer - Parallels - http://www.Parallels.com/fr/ (2016-01-24)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2016-01-21)

  LastPass - LastPass - https://lastpass.com (2016-07-21)

  1 - ClickWeather - TWCi - http://www.weather.com/ (2014-09-26)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-28) [Support]

  GoPro (2014-12-25) [Support]

  Paragon NTFS for Mac® OS X (2016-06-24) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 804,84 GB

  Destinations:

  Seagate fake TC [network]

  Total size: 5,00 TB

  Total number of backups: 47

  An older backup: 25/06/16, 22:10

  Last backup: 21/07/16, 11:41

  Size of backup drive: Excellent

  Size of backup 5,00 TB > (disk size 999,35 GB X 3)

  Top of page process CPU: ⓘ

  100% safari

  2% WindowServer

  1% kernel_task

  1% fontd

  0% aslmanager

  Top of page process of memory: ⓘ

  17.14 Go Safari

  1.08 GB kernel_task

  Com.apple.WebKit.WebContent (4) 492 MB

  Mdworker (17) 369 MB

  98 MB com.bloombuilt.dayone - mac-agent

  Virtual memory information: ⓘ

  100 MB of free RAM

  used GB RAM 24.00 (1.18 GB being cached)

  18 MB used Swap

  Diagnostic information: ⓘ

  July 21, 2016, 13:34:20 /Library/Logs/DiagnosticReports/Safari_2016-07-21-133420_[redacted].cpu_resourc e.diag [details]

  /Applications/Safari.app/Contents/MacOS/Safari

  21 July 2016, 13:21:33 self-test - spent

  July 21, 2016, 13:13:28 /Library/Logs/DiagnosticReports/Safari_2016-07-21-131328_[redacted].cpu_resourc e.diag [details]

  July 21, 2016, 13:04:50 /Library/Logs/DiagnosticReports/Safari_2016-07-21-130450_[redacted].hang

  July 21, 2016, 12:49:58 /Library/Logs/DiagnosticReports/Safari_2016-07-21-124958_[redacted].cpu_resourc e.diag [details]

  July 21, 2016, 11:37:51 /Library/Logs/DiagnosticReports/Safari_2016-07-21-113751_[redacted].cpu_resourc e.diag [details]

  July 21, 2016, 11:28:47 /Library/Logs/DiagnosticReports/Safari_2016-07-21-112847_[redacted].hang

  July 21, 2016, 11:12:09 ~/Library/Logs/DiagnosticReports/cloudd_2016-07-21-111209_[redacted].crash

  /System/Library/PrivateFrameworks/CloudKitDaemon.Framework/support/cloudd

  July 21, 2016, 11:00:46 /Library/Logs/DiagnosticReports/Safari_2016-07-21-110046_[redacted].cpu_resourc e.diag [details]

  July 21, 2016, 10:36:18 /Library/Logs/DiagnosticReports/Safari_2016-07-21-103618_[redacted].cpu_resourc e.diag [details]

  July 21, 2016, 08:00:39 /Library/Logs/DiagnosticReports/Safari_2016-07-21-080039_[redacted].cpu_resourc e.diag [details]

  July 20, 2016, 11:13:27 /Library/Logs/DiagnosticReports/Safari_2016-07-20-111327_[redacted].cpu_resourc e.diag [details]

  July 20, 2016, 07:08 /Library/Logs/DiagnosticReports/Safari_2016-07-20-070800_[redacted].cpu_resourc e.diag [details]

  July 19, 2016, 17:09:01 /Library/Logs/DiagnosticReports/CalNCService_2016-07-19-170901_[redacted].crash

  /System/Library/PrivateFrameworks/CalendarAgent.Framework/versions/A/XPCService s/CalNCService.xpc/Contents/MacOS/CalNCService

  July 19, 2016, 12:55:09 /Library/Logs/DiagnosticReports/Safari_2016-07-19-125509_[redacted].cpu_resourc e.diag [details]

  July 18, 2016, 20:01:22 /Library/Logs/DiagnosticReports/Safari_2016-07-18-200122_[redacted].cpu_resourc e.diag [details]

  July 18, 2016, 13:56:03 ~/Library/Logs/DiagnosticReports/suggestd_2016-07-18-135603_[redacted].crash

  /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd

  What made these disk errors go away? These are almost always bad news.

  But in fact: at the moment, Safari appears the biggest problem. Try to start in Safe Mode, followed by a normal reboot.

  OS X El Capitan: start in safe mode

• Cannot read the video error code is 8007000E computer ran out of memory.

  OT: Media Player
  I recorded the video with lightwave usb webcam when I tried to read that I got the error message that my computer ran out of memory and so I should close other programs and try again. The error message given is C00D11C6 and gives as origional error code 8007000E

  You can help me solve the problem

  Joseph

  Hello

  1. don't you make changes to the computer before the show?
  2. do you have any third-party codecs installed on the computer?
  3. what operating system is installed on the computer?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library

  Method 2
  In the meantime, download and install MPEG-2 DVD decoders and check if that helps fix the problem:

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

• Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Error code: 0 x 80007114

  Operating system Windows XP, at startup, I get the message: "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full"and displays the error code: 0 x 80007114.  (I have a new drive hard with enough space) Outlook Express always open well and functioning normally.  The message mentions and how to fix the problem?  Thank you, Rick

  Jump here (nothing Bruce suggested is false), I did a search and found this old article (http://support.microsoft.com/kb/245419), which indicates that there is a bad entry under the identity key in the registry (see www.oehelp.com/backup.aspx for background).  So if it's a big problem, you can do the steps suggested in this article and that will fix it.  Or if you have just one account, then backup your settings and the identity key and then delete the identity key and then start OE and it will establish a new, and you can then set up your account again, and then import the messages from the older directory.  But it does not indicate the major corruption, so you can just ignore it.

  Steve

• 'Out of memory' error HP printers work

  Hello...

  I use an older version of Microsoft works because I have more than 100 files in this part, also use Microsoft Word to other documents...

  My printer is a HP SGP-1510... and al was OK... with this printer

  Now, I install a new HP C4280 and HP Deskjet D4360 and all works well but Microsoft Works always have an error.

  Show "out of memory" when using the new printers.  with HP PS-1510, everything was OK.

  So I did something with the new driver

  (The last... last soltion is use work and print in PDF format, then use Acrobat Reader to print HP again, but I'm looking how to directly use the works to print with new HP printers)

  Anyone has a solution to use a new printer with Ms Works

  Hello.. I found a solution here...

  I have try this before... but now it works for me... (maybe a few step that I was wrong)

  Now I use Microsoft Worsks 4. 5A under Windows XP on C4280

  but

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/Ms-works-8-0-quot-out-of-memory-quot-error-printing-to-C7280/TD-p/28915

  For XP:

  1. click the Start button, Control Panel, and then select Printers and faxes.
  2. double-click on the add printer icon.  Click Next.
  3. When prompted, select Local, and then click Next.
  4. choose USB001 as port and then click Next.
  5. in the printer list, choose the printer HP Deskjet 990c or Deskjet 550 c printer, and then click Next.
  6. in the manufacturers list, select HP.
  7. the name of the printer should be among the HP Deskjet 990c or Deskjet 550 c printer.
  8. click Yes when the message ' want you as your programs based on Windows to use this printer as the default printer? "appears.  And then click Next.
  9. click on not when the message "Do you want to print a test page (recommended)".

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/Ms-works-8-0-quot-out-of-memory-quot-error-printing-to-C7280/TD-p/28915

  If someone needs CD INSTALLER for ALL IN ONE SERIES C4200

  http://www.4shared.com/dir/CU-zYNK7/CD_Instalacion_-_Setup_CD.html

• ORA-27102: out of memory

  Hi all

  11 GR 2

  RHEL6.5

  I'm from our TEST database, but I got error

  $ sqlplus / as sysdba

  SQL * more: Production of the 11.2.0.4.0 version on MON Feb 1 09:21:46 2016

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connect to an instance is idle.

  SQL > startup

  ORA-27102: out of memory

  Linux-x86_64 error: 28: no space is available on the device

  Additional information:-33554432

  Additional information: 1

  What is the memory below that I can attribute to my LMS avoid this error?

  # free-m

  total used free shared buffers cached

  MEM: 14882 9679 5202 1012 29 1759

  -/ + buffers/cache: 7890 6991

  Swap: 20488 8881 11607

  I also Thomas set shmall in /etc/sysctl.conf

  # Control the maximum number of shared memory pages segments

  kernel.shmall = 4294967296

  Thank you very much

  JC

  shmall is the total amount of shared memory, in the pages, that the system can use simultaneously.

  Define shmall equal to the sum of all Sams in the system, divided by the size of the page.

  The page size can be determined by using the following command:

  $ getconf PAGE_SIZE

  4096

  For example, if the sum of all Sams in the system is 16 GB and the result of

  "$ getconf PAGE_SIZE" is 4096 (4 KB) then set shmall 4194304 pages

  As the root user affect the 4194304 shmall in /etc/sysctl.conf file:

  kernel.shmall = 4194304

  then run the following command:

  $ sysctl Pei

  $ cat/proc/sys/kernel/shmall

  4194304

  The above command loads the new value and an restart is not required.

  Return to the oracle user and try again the start command.

• "Out of memory error" - and can not reinstall correctly - Psc 1401

  Hello

  I have somehow all of a sudden started to receive an 'out of memory' error whenever I try to print. So I tried every idea I can find to try to re - install my printer and the software but can't even get that accopmlished without getting "fatal errors". (tried Print doctor, following the troubleshooting report trying to install mode of boot etc..) Anyone encountered this problem recently and found a way to fix it?

  With the help of:

  Printer - PSC 1401 all-in-one

  Windows 7 64 bit

  Recent changes, I did before noticing that this erorr, is that I have installed a new video card and more ram... no idea why this would cause a problem.

  Thanks for any help.

  @HP-CompaqPC, please check your Inbox again private message.

  Here's where you can find the private message Inbox.

  

• We cannot open Skype. You are already signed in on this computer. Please log out and try again.

  Hello

  Please help me, I uninstall and download the latest version of Skype, but it is not sign in. give below error.

  We cannot open Skype. You are already signed in on this computer. Please log out and try again.

  Please help me solve this problem. I have no account of any loged in on Skype so why this error happens, or even no 8 Skype window does work I have also uninstall Skype window and install Skype Office fresh but error please help me solve. Thanks in advance.

  

  Start your Windows in safe mode and then try to rename the folder % appdata%\Skype.

  http://www.howtogeek.com/107511/

• my mac is running out of memory

  my mac is running out of memory. A couple of times that my mac has said it is close to running out of memory to disk. What should I do?

  OmniDiskSweeper (free download)

  http://www.OmniGroup.com/more>

  When you use OmniDiskSweeper, or any utility that displays all the files...  See the article after if you want to run it as root

  http://www.MacObserver.com/TMO/article/how_to_recover_missing_hard_drive_space>

  Warnings of boiler plate:

  DO NOT delete files in your folder-> library tree as it has things like backups of your iPhone, your emails, your application preferences, etc...  If you think that you found something in your Home-> library folder which can be removed, you must ask first.

  DO NOT remove the files outside your home folder, you can end up removing something essential to Mac OS X and transform your Mac into a costly "door Stop."

  I want to say that you will find a few very large files in private-> var-> vm (these are Mac OS X virtual memory paging files (swapfiles) and where Mac OS X stores the RAM copy when your Mac is paused).  The swapfiles are removed on reboot, and the sleep image will just be recreated when you put your Mac to sleep.

  If you think that you found something to remove outside your home folder, it would be better to ask first before deleting.  There are many examples of people deleting files outside their home folder, rename files, or change the property or file permissions and then their Mac stops running.  Don't be one of those people.  Ask first.

• The utility file splitting, "LabVIEW out of memory" message...

  I set up a quick utility that takes a .txt file and it splits into n segments.  The problem I have is that when I feed a larger file in it it gives me an error "Out of Memory".  What is a most effective way todo it.  Attached you will find the VI.  It is written to 8.6 it take part in many, lol, it works very well as long as the file is less than 35 MB.

  Here's a passage from 15 minutes to rework your VI.  It can solve the problem of memory off and it shows much better style of LabVIEW.  You may be able to find examples of similar bolt by searching on this forum.

• Out of memory when the function call (CopyTabPage)...

  Hello

  I get error "-12 out of memory" when using CopyTabPage (Panel, TAB, 0, Panel, TAB,-1) on my request (the first duplication tab).

  There are several levels of tab panel system (like this example)

  \tab_1 \sub_tab_1
          \sub_tab_2
          ...
          \sub_tab_16
  
  \tab_2  \sub_tab_1
          \sub_tab_2
          ...
          \sub_tab_16
  
  \tab_3  \sub_tab_1
          \sub_tab_2
          ...
          \sub_tab_16
  
  \tab_4  \sub_tab_1
          \sub_tab_2
          ...
          \sub_tab_16
  

  Each sub-tab panels contains appx. 16 x 60 controls (digital, ring, String) and some of them also stripchart graphics.

  I have reached the limit of the CVI? Are there things to check? (I develop under CVI 2012 SP1).

  May - so that someone knows how to fix this?

  Thank you

  George

  
  

• Error 2013 CVI: the compiler has run out of memory.

  Hello

  I get this error in a source file, I want to debug:

    1, 1   Error: The compiler has run out of memory.
        1, 1   Note: You may be able to work around the problem:
        1, 1   A. Set the debugging level to 'no run-time checking'.
        1, 1   B. Split your source file into smaller files.
        1, 1   C. Enable the 'O' option for your source file in the project.
        1, 1   D. Move large static data structures into new files and
        1, 1   enable the 'O' option for the new files.
  

  Options A and C turn off debugging AIDS especially, and I don't dare edit.

  So no possibility to increase the memory limit?

  
  

• Node inside the loop - out of memory

  Hello world

  I have a Mathscript node inside a Subvi is called inside a loop for. After a few iterations of the loop, I run out of memory. That's why I added another node in Mathcript with the function 'clear' outside the Subvi, hoping that after I get the variables from the node I could erase the memory of the Mathscript, but this does not work, it is always short of memory.  Is anyone know how can you delete variable memory Mathscript node, once they were saved in the variables in Labview? Thanks in advance.

  

  You don't even really any useful information to solve the problem. As I exaplained, constantly deleting data sets just to reassign them to the next iteration is generally ill advised, because it causes just more performance and same memory fragmentation issues. It is best to operate locally as much as possible.

  Who wrote the code matlab? Maybe it's very inefficient? What is doing? Perhaps rewrite in LabVIEW you gain significant performance.

• Out of memory exception

  Out of Memory occurred several times in my application running on Windows server 2008 R2 Standard (Service Pack 1)

  I found an exception in the event viewer, but it just once.

  Let me know the best solution for this

  Exception from the event viewer:

  The failed module name: mscorwks.dll, version: 2.0.50727.5420, time stamp: 0x4ca2b820 Exception code: 0xc0000005

  .NET runtime version 2.0.50727.5420 - engine error fatal execution (74A1E92A) (80131506)

  Kind regards

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum