outdo rete wireless no is una configurazione IP validation

This appears as a diagnosis of routine provided by windows automatic error correction.  The latter is called manually when the COMPUTER connection fails without reason visible, just in unpredictable ways.  It is the same for the wifi connection or cable.

Hello

This forum is only for the English language - use the forum for your language, please.

(questo forum e solo in lingua francese - di utilizzare forum of it by lingua, vi want property)

Here is the link to your forum (link Ecco it by the forum of it vostro):

http://answers.Microsoft.com/it-it/Windows/Forum

LC

Tags: Windows

Similar Questions

  • It could esserci verificato a problem with pilot he della scheda outdo rete wireless

    It could esserci verificato a problem with pilot he della scheda rete riesco conetermi wireless wireless.non outdo

    Rental select your language from the drop-down at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

    Buongiorno

    If get di rates the lingua dal menu a discesa by send her tua domanda nella vostra scelta di lingua. Forum it cui hai posted by e by solo inglese. SE non riesci a find wishes of the lingua, he supporto delle options by Esil international further if can find following he link that sotto:

    Grazie

    http://support.Microsoft.com/common/international.aspx

  • Receive the message error "wireless network connection is not a valid ip configuration.

    Original title: unable to connect to wifi on windows 7 on Dell laptop

    Help!  I went on vacation and used my laptop to DVD play only.  I am now back home and cannot connect to the Internet.  I tried all sorts of resolutions without result.  When I use the Troubleshoot utility, it tells me to stop my router and turn it back on.  I've done this multilpe times at this point.  Once I keep in the resolution of the problems, I get the same message again and again: "wireless network connection is not a valid ip configuration.  I disabled McAfee and morning services.  I used the command prompt to reset WINSOCK, IPv4 and 6.  I turned power on and off wireless by using the key on the keyboard.  I disabled and enabled the network connection.  I have the driver-upated.  I know the router works properly from my iphone and iPad is all connected without problem.  I removed and added to the wireless network.  In the network and sharing Center (I would copy and paste the view up here, if I could, but since I can't get online...), it is said "unidentified network, no internet access" on the right side, and he also says that I'm connected to a public network.  There is no link to click for the public network and I can't seem to find a way to change it to the House (there are no options, no links).  I tried to solve this problem, after I get home from work every night and I'm so frustrated that nothing works.  Please, please help!

    Kristine,

    Please try these steps before replacing the adapters and let us know the results.

    1. To open a command prompt, click Start , and then type CMD in the programs and files.
    2. Right click on CMD.exe in the programs icon and select run as administrator.
    3. When the user account control pop up box, click Yes.
    4. At the command prompt, copy and paste (or type) the following command and then press ENTER:
      netsh int ip reset c:\resetlog.txt

      Note If you do not specify a path of the directory for the log file, use the following command:

      netsh int ip reset resetlog.txt
    5. Restart the computer.

    If the problem persists, go through the given suggestion't-have-valid-ip/62ca59b1-c173-4465-9153-554a13928315 http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wireless-network-connection-doesn

    Hope that these measures could help you.

  • "Wireless network connection" is not a valid IP configuration. "

    When I try to connect to the internet via a wireless connector I can but it takes anywhere from 10 to 20 minutes and many attempts that all generate the message title above.  but then it finally works.  It works great once its connected but the same connection problem happens the next time that I try to connect.  I don't know much about the technical problems for all responses must be in pretty easy to understand the jargon and thanks :)

    Hi Richard,

    Welcome to the Microsoft community.

    According to the description, resembles the internet connection is slow.

    What operating system you have installed in the computer?

    I suggest you click on the links and follow the instructions to resolve this problem:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Please post back with more details so that we can help you better.

  • "Wireless network connection is not a valid ip configuration" Windows 7

    I recently uninstalled McAfee antivirus on my aspire one NET accountant running Windows 7. Since then, I can't connect to the internet, I get a "wireless network connection has a valid ip configuration" of all other pc to connect to my router wireless without any problem.

    Any advice or help?

    Firstly, to check that the files are not corrupted, run the following analysis.

    Start > type CMD

    Right click on CMD and select run as administrator

    Type sfc/scannow

    Press enter

    Note: There is a space between sfc and / scannow

    The scan will take a few moments

    Use the System File Checker tool to repair missing or corrupted system files

    http://support.Microsoft.com/kb/929833

    Once the process is complete, you may receive one of the following messages:

    • Windows resource protection did not find any breach of integrity.

      This means that you have not all missing or damaged system files.

    • Windows resource protection could not perform the requested operation.

      To resolve this issue, perform the analysis in safe mode System File Checker

      (http://windows.microsoft.com/en-in/windows/start-computer-safe-mode)

      and make sure that the files PendingDeletes and PendingRenames exist under %WinDir% \WinSxS\Temp.

    • Windows resource protection finds files corrupted and managed to fix it. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

      To display detailed information on the analysis of system files and restore, go to the display of the details of the System File Checker process.

    • Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

      To repair the corrupted files manually, see the details of the System File Checker process to find the damaged file, and then manually replace the corrupted file with a good copy of the file.

    Second, have you tried to download the drivers and save them to your desktop?

    Close all window and/or applications

    Right-click on the file and select run as administrator

    Or, restart and start typing the F8 key

    Select Mode safe mode with networking

    Again, right-click on the drivers that you saved on the desktop and select run as administrator

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-Vista

    Troubleshooter

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems

  • Wireless network connection is not a valid IP configuration / wifi problems

    I recently bought a laptop Asus G74 from Best Buy. It is currently running Windows 7 x 64 home premium. I am away from home on a job to work on a project for my company and during the two weeks have stayed at the same hotel with the same wireless, leaving home for thanksgiving between stays. The first week I spent the unsecured WiFi, download programs and games and play. I left the House, returned and used the wifi day, realized there is an ethernet cable in my computer bag laptop and connected to the hard line for the next day. I went to a colleague of room (a room down), went to look for the WiFi, and the trouble started.

    Diagnostics Windows network tells me that the wireless network connection is a valid IP configuration. I thought it would be something to do with the drivers, so I opened by Device Manager, went through each of my NICs 5 or more and look for the updates of drivers. A couple said they have successfully installed, but nothing has changed my ability to connect. Then I thought about rolling back the drivers, but since I've had the laptop for such a short time (less than 30 days) the option is grayed out. It wouldn't make sense since I could connect the previous week on the same wireless.

    From there, I decided to try a system restore to a point when I was getting into at first hotel. Restarting the laptop and the restore was successful. I tried to log in again and the same problem arises. I downloaded a couple of my favorite, Malwarebytes, and SUPERantispyware tools. Both have nothing.

    So I did some research and digging and scholar on ipconfig (flushdns / release / renew) with an elevated command prompt. I tried these and they told me my media is "disconnected" and cannot be released or renewed. I found this strange since I can see the wifi network. I tried to use the Fn + F2 to toggle the wifi and WIMAX (no idea which is incidentally) with simple ipconfig and media disconnected status does not change. I also read that disabling ipv6 might help, so I did this and still no dice. I restored system again for the 2nd point earlier and it still does not connect.

    Drop-down wifi icon in the bottom right of the screen, after trying to connect to the network unsecured wifi here (BWCamarilloInn), it reads 'Unidentified network' and under it "no internet access. I had different flavors of this message, including "limited access".

    I thought I'd try a cross-check to see if it was not on the end of the hotel. I pulled out my laptop backup enterprise and was able to immediately connect to the wifi, and my colleague from work related to his phone and his netbook. I saw another thread somewhere on a Windows forum that suggests a clean boot. Tried, has not changed anything either.

    Currently I have about 5 different adapters according to the Windows Network Diagnostics: the 1/2 LAN connection and Wireless Network Connection 1/2/3.
    I also have 5 in the drop-down list of the network adapters in the Device Manager.

    Intel Centrino WiMAX 6150
    Intel Centrino Wireless-N 6150
    Microsoft Virtual WiFi Miniport adapt
    Microsoft Virtual WiFi Miniport adapt #2
    Realtek PCIe GBE Family Controller

    and a separate drop-down list called adapters Intel Centrino WiMAX, with a menu drop down called function Intel® Centrino WiMAX 6150 driver.
    They are all updated when right click and check for driver updates.

    I also looked through the different adapters and checked to see if the ipv4 settings have been defined to automatically detect the IP of/etc.

    The laptop is great and I wouldn't really have to take it back to Best Buy. Other problems seem to be of culture that may be useful to know. Patch of League of Legends sometimes throws me an error "kernel patch pvp.net has stopped working", or just sits on the main projection before it hits the pitcher. Sometimes, it goes past the pitcher and he's here without connect to or start the main game. I heard that this has to do with the network stuff. I am computer literate, but I'm not terrible with networking or internet configuration stuff. If anyone can give me a hand, that would be much appreciated. I'll help you as much as I can. I've also attached the current ipconfig info (I'm connected to the internet via an ethernet to the wall cable, League of legends should therefore be able to launch).

    Thanks in advance.

    -Chris

    ipconfig Info

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

    C:\Windows\System32>ipconfig

    Windows IP configuration

    Ethernet connection to the network space 2 card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Wireless Network Connection 3 Wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Wireless Network Connection 2 wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Wireless network connection Wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : nomadix.com
    Link-local IPv6 Address...: fe80::d572:64 c 9: d97c:1f0a % 11
    IPv4 address...: 10.0.0.45
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 10.0.0.4.

    Tunnel adapter ISATAP.Nomadix.com:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. : nomadix.com

    Tunnel adapter isatap. {0B9C8743-1CDE-4BFF-9FDD-153D2D44F596}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Tunnel adapter isatap. {FD7B8B70-2937-4816-B45C-B73104366373}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Card tunnel Teredo Tunneling Pseudo-Interface:

    The connection-specific DNS suffix. :
    IPv6 address: 2001:0:4137:9e76:423:3796:f5ff:ffd2
    Link-local IPv6 Address...: fe80::423:3796:f5ff:ffd2 17%
    ... Default gateway. : ::

    Tunnel adapter isatap. {33A5C370-7EBC-4E95-A9AD-C7F3BF5D373E}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Tunnel adapter isatap. {501554B1-09E9-49B0-9078-04D0ADBD48A1}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    C:\Windows\System32 >

    Edit
    minor changes to the grammar/punctuation

    Hey, sorry for the slow response. Just got home a few days, and since then, I've been able to connect both the wifi just next door (I'm on the end furthest from the beach with her, but I can still connect) and on my netgear n wireless router. I can also access the router dashboard. Fail to starbucks so just wifi next door was the next best thing. ASUS finally answered after 11 days, saying I should reinstall the wireless driver, which I told them was one of the first things I did. Well. It seems that the hotel wifi and I have no idea why this is the case. I was able to connect to the wifi at the hotel the first week and not the second while they might have changed something. I have no idea. I'm just glad that it connects to other networks, both guaranteed and no guaranteed. I'm just a bit worried that it might happen again in the future but I always wear a hard line in the event of an emergency and a business laptop backup.

    With this new information, should I worry still try to fix anything with the hotel wifi, or do I just leave it as is? Thanks for the support continuous, 100 times better than ASUS right now: P

    -Chris

  • Individualization Condivisione Condivisione Rete Rete network in ingresso In entrata Assistenza remota Servizi RDP Remote Desktop terminal Remote Desktop

    Mia outdo rete Wireless 2 is no, in particular after cross abilitata compare sempre una X rossa e quando tento di riconoscere far it mouse HP wifi, fino has some tempo fa adapter, no lo riconosce. In particular lo accendo per farlo riconoscere dal PC e parte outdo my dopo a brief secondo dopo che by a device P2P del mio PC poi scompare ed in. He mio PC non riesce a point the access of air ticket. Fino has some tempo fa al momento dell'accensione it PC if sia connetteva alla rete wireless wifi di internet usually e sia come detto all gia'altra outdo P2Pnome del mio PC. Non sono riuscito a discovered como ripristinarla. È qualcuno che mi Può help.

    Grazie
    Daniele Santoro

    Bollettino Microsoft answers store supporto in lingua inglese. Di seguito Uniform Resource Locator (URL) fara in modo di ricevere information support by the posizione adeguato. Open it be e rates regione dal menu a tendina e quindi fare click sul pulsating freccia in continuare.

    http://answers.Microsoft.com/it-it

  • Wireless connection to NI9191

    He can't make connection Wi - Fi of NI 9191. Wireless on wlan0 mode is not valid. Details: [Arg_TargetInvocationException] see attachments.

    Gary had called paramedics, this message is for everyone to know what was the solution.

    The static IP address that Gary used was not accepted by the router for some reason, the definition of the NOR-9191 for use authorized DHCP appliance is on its network.

    Kyle K.

    Technical sales engineer

    National Instruments

  • Unable to connect wireless to the Internet - Atheros - HP Pavilion dm3-1035dx

    Hello

    Laptop: HP Pavilion dm3-1035dx

    I just formatted the computer and the software has been reinstalled. I have the latest Atheros on the Site of HP drivers.

    I'm unable to connect to wireless internet, despite what I do. I will try to connect to a network, and it will then show with the little yellow Triangle showing limited access.

    Troubleshooting of the shows "wireless network connection is not a valid IP configuration [not not fixed]" and "[detected] problem with wireless adapter or access point.

    The wireless router is 2.4 GHz (B + G). Security is WPA2 (AES).

    Once I have disable the security for the wireless router I am able to connect to the internet. However, once I got change back to WPA2 (AES) I can no longer connect.

    I have crossed the wires and haven't found a working solution. If I could get help that would be greatly appreciated, thanks.

    Fixed a problem.

    Don't know what he did but the wireless connection is working now.

    I turned off my windows firewall. I disabled the router security and was able to connect to the internet.

    Then back to WPA2, the connection has failed.

    I tried ipconfig / renew ipconfig/release in commmand invites a few times and ipconfig/release would not work ("..") Unable to contact your dhcp server...). However, after several attempts more to play, I was able to connect wirelessly with WPA2 and windows firewall on.

    Ipconfig displays now, 192.168.0.1 and not 169.254.61.203

    Please help us Erico

  • Printer DESKJET 3070

    Hello!

    I need help to install my new printer... anyone speak Italian? I speak very little English...

    Hello Millo

    Unfortunately I don't speak Italian, I am, however, resourceful. The Documents below should help you install your new printer.

    Sommergibili del software del prodotto in una outdo di rete wireless

    If you have another operating system or Setup that you can look at the page below it lists the different types of installations, you can choose to run.

    Pumps/disinstallazione di software & driver

  • Ping 127.0.0.1 fails on Windows Vista

    On my Packard Bell EasyNote AJ300 with Vista Home Basic SP2 Italian my network connection is always in a State of "local." Same problem wireless and wired connections. I have disabled TCP/IPv6, 6to4 adapters, isatap interfaces and teredo tunnels, I used the two auto fix tools MS (50199 and 50203), I reinstalled the wlan with the more recent drivers, I tried with wlan card usb and its manager of connections I checked for viruses or malware. I've disabled IP Helper and checked the client DHCP is running. I disabled the firewall and antivirus client.

    Same problem with the connection of network in safe mode

    It's my ipconfig/all:

    Configurazione IP di Windows

    Nome... host: casa
    Suffisso DNS primario...:
    Type nodo...: Ibrido
    Abilitato... IP routing. : No.
    Proxy WINS abilitato...: No.

    Outdo the LAN scheda rete Wireless:

    Suffisso DNS by outdo specifico:
    ... Description: Atheros AR5007EG Wireless Network adapt
    Address physical...: 00-15-AF-7D-29-AD
    DHCP abilitato...: If
    Configurazione automatica abilitata: If
    Automatica configurazione address IPv4: 169.254.144.122 (Preferenziale)
    ... Subnet mask: 255.255.0.0.
    Gateway predefinito.... :
    Known NetBIOS TCP/IP: started

    Hi Enzod,

    Step 1:

    First of all I suggest you cancel any changes that you have made your computer.

    Step 2:

    You try to perform a system restore to go back to the properly working parameters and verify if you are able to go online.

    For more information, see this link below.

    System Restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

    Step 3:

    If the problem persists then, I suggest you to uninstall and reinstall the NIC drivers and see if the problem is resolved.

    You must be logged on as administrator to perform these steps.

    a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    (b) in Device Manager, look for the device and then double-click the device name.
    c. click on the driver tab, then click on uninstall the driver and follow the instructions.

    Reference:

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Note: You must visit the manufacturer's Web site to download the latest NIC drivers.

    Reference: http://www.Atheros.com/pt/index.html

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • VLAN Trunking, Link Aggregation Teaming e

    Hello to all,

    avrei need some delucidazione in merito ad una configurazione di vsphere tipo di.

    VI spiego in brief:

    2 vSphere host (host a host B e) con Nic 4 x host

    1 Swicth (by manage Vlan [LAN, WAN, DMZ, vMotion, FT, iSCSI, etc...])

    UNA configurazione base pensavo di implementare e configurazione di che a vSwicth0 con 4 Nic teamwork by every host.

    1 configurated it grouping schede di 4, sul mio spend devo configurare Illinois Link Aggregation o mi not serve? (Su Che HP e called trunk mi pare) in terms static pole e Unico supportato da vmware. IO ho noticed no configurando sullo switch funziona tutto e nulla che to provo a uno dei 2 cavi dictionary alla volta no capacity it marked.

    In più is configurated the vlan lato vmware e lato switch it tutto funziona a meraviglia.

    Ho cercato della menus in merito e mi sono imbattuto knew menus che strategies come collegare una a nodo con ESX 2 schede di rete grouping known uno switch HP 1820 - 24G switch trunk spiega di configurare lato Dove he terms static e change policy Exceptions led on the way teamwork based on hashing IP!

    Ho seguito guida (penso alla lettera!) my con mi ritrovo a problema e cioè che non raggiungo più he nodo ESX... create Reed is raggiungo all the macchine all'interno delle vlan!

    Part menus seguita indicarmi could be wrong something particular? Qual'e un'approccio by una configurazione del genere?

    Grazie!

    Ciao,.

    He port group management che ESXi default crea sommergibili durante ha UN override sulle di teaming dello switch che lo contains rules, pertanto is configuri ip hash sullo switch devi premurarti di farlo Reed dichiaratamente anche sul port group, altrimenti lo lost cosi come indichi! By Miss instradamento e momentaneamente entrare ESXi stacca chest he oppure altre tre at door

    By the configurazione, funziona tutto anche senza trunk perch it grouping nativo port id che fa e agli switch, solo devi overlooks VMware verificare che gli convenctions delle tabelle di ARP siano veloci, o nel caso di più presenti, che sia abilitato switch it quick dello tree covering weight, my con i modelli HP come he tuo o superiore usually queste cose funziona nativamente.

    Ciao,.

    Luca.

  • DISK BY DELL POWEREDGE 2950

    Buongiorno, TR e rotto UN drive hard nel Server Poweredge 2950. E' UN DELL BARRACUDA ES.2 manufactured by da SEAGATE 1000 GB con S/N 9QJ34S01 and P/N 9EF248-050 (Serial Attached SCSI - SAS).

    He disco fa parte di una configurazione RAID 1, che I like ripristinare al più presto.

    I like acquistarne uno ed avere un preventivo. I'm dati by engineering del preventivo e spedizione sono:

    A.m.. Architetti S.r.l.

    Viale Bruno Buozzi, 49

    00197 ROMA

    P.IVA e C.F. 04869451007

    VI prego di farmi turned out he con preventivo di price terms prima possibile.

    Grazie

    Speaking saluti

    Michele Angeletti

    Buongiorno,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

    - Service tag del Server

    -ed email phone number

    Speaking saluti

    Manual

  • Instant e ESX4.0

    Hello to all,

    VI sewn pole sono in una location a tragica, mi sono imbattuto in una configurazione dove in. knew a server virtuale mi trovo to 50 file vmdk che sono Fanta ad occupare lo spazio su disco... tutto e any instant present dallo Snapshot Manager, Mi dicono che era stato fatto UN delet all my in realtà dei file non era stato nulla cancellato... Ho tried da riga di comandi an e verificare in effetti mi dice che any snapshot presents e... sta di fatto che oltre al main vmdk ho altri 49 collegati folder... Come posso fare per risolvere some dritta avete da consigliarmi?

    Grazie in pre-empted

    Ciao,.

    Tutto forward-looking to ESX 4.0 e pre o post update 2, col secondo procedure e easy Reed to hai pochissimo spazio libero, col previous devi unfortunately con organizzarti e procedere al as UN cloning della VM storage in modo da consolidare I brain.

    VMware ha una guida di Como in fare picture both I casi:

    VMware KB: Consolidation of the snapshots in ESX/ESXi 3.x and 4.x

    Ciao,.

    Luca.

  • Backup VM con su DB vCenter Server Database dedicated to vCenter Server

    Buonasera a tutti in una configurazione di questo genere e do sia possibile he con backup data led the agent dedicated has he con backup snapshot by the di vCenter Server VM VM?

    He dubbio e he rischio di trovarmi in fase di uno stato di non consistenza restoration. Pero i problemi there it tempi di ripristino del nuovo vCenter Server.

    Grazie

    A questo punto non mi preoccuperei, I'm restoring li avresti ad ogni modo consistenti.

    Se by it backup della VM ICU software UN adeguato, che uses instant e gli TR integra con I VSS, you it consistent filesystem.

    It backs up del DB con e agent e consistent by definition.

    COSA ti turba di tutto cio?

    Ciao

    Francesco

Maybe you are looking for

  • Aqua M4 battery problem?

    I'll just watch videos on youtube my phone as usual (it ws 85%) and all of a sudden my phone turns off. I tried turning back on and keep it on charge and hold power + up/down on the volume, but nothing works. Anyone know what is the problem or how to

  • Wonding if my copy of Windows 7 is genuine?

    What is my copy of Windows 7 genuine.  I bought on ebay, installed but no product key right.  Has been activated by phone, here's the diagnostics Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data--> Va

  • Getting started on pure J2ME app

    I did successfully and deployed a BB app using the full rim API, with the help of you guys.  Now, I need to write a simple version using J2ME, so that it is portable.  However, I have trouble getting an application running in the Simulator.  Here's w

  • How to account for the Radius Server cisco vpn client

    Hello I would like to realize vpn cisco customers My config is: AAA authentication login default local radius groupRADIUS AAA authentication login aaa_radius local groupRADIUS group AAA authorization exec default authenticated ifAAA authorization vpn

  • HP 1200 printer does not print check when it is connected to the Jetdirect card but will display the report

    HP 1200 printer is plugged in with the USB cord to HP Jetdirect box and it gets IP from there.   Printer is set for the server with the ip 192.168.10.7 of print Print server is 192.168.10.12.    Backend server account try to print to a control with t