Output report l / h

Similar Questions

• Atfer I run chkdsk /f y at - it a newspaper I can access to view the codes of output reported by this utility?

  Hello

  I would like to know if after I run chkdsk /f {DRIVE}: the utility generates a log file that contains the output generated by the check codes?

  • If so, how/where can I access
  • If NOT, how can I run this command to generate a log file that contains the exit codes

  Thank you

  After running chkdsk /f and restart, go to event viewer > Windows Logs > Application.

  Search for 'Wininit', near the top of the list, double click on it to read the report.

• Look at a PDF output reports a wrong format

  Background:

  EBS11.5.10.2

  level migration from solaris to linux apps - requires new tech battery installation.

  Problem:

  PDF reports generated from a competing application do not have the correct format.  That is to say the newspaper is missing, boxes/column outlines are not print - only generic text output

  The selection of the printer is noprint

  On the solaris system source uses the noprint printer driver of hpl with arguments acroprint, which in turn call acroread - I think it's a method they use to convert pdf to postscript-oriented (I'm new to this system have therefore no history with her)

  I'm not sure what to do to get the correct visualization for PDF files with the new linux installation.   I tried different drivers for noprint, nothing has no effect.  I tried to reproduce the acroprint set-up... same result.  No matter what I change behind the scenes, the report view is exactly the same.  All the text and all the missing formatting.

  The report itself is configured to use the PDF_PORTRAIT style.  I had to create this style in the new system, it's apparently a style custom - it is the only component scripts acroprint/acroread.  I tried to imitate the configuration on Linux, but the old man has Acrobat 5.  Acrobat is currently not acorprint script - it was can be personalized? Not sure again.

  Bottom line, how can I get PDF to display as properly formatted?  I'm not printing, only look at one... so do not know if I need to set up printing from blocks just to see?

  I appreciate any help you can give. I have another similar thread... but I think I took it the wrong way, so I'll close this one.

  Thank you

  Lori

  The problem has been resolved by a copy of the report of the source - this resolved that the rep-1800 and formatting has been corrected.  Something must have happened to the file when the archive original was created to move the system.  Thanks for all your help!

• Output report shows different characters for English letters

  Hello
  
  The output of the PDF report shows different characters for English letters for alrl concurrent reports

  Could you please put the content of the.env custom file under directory $APPL_TOP?

  Thank you
  Hussein

• Problem with output report layout

  Hi friends,
  
  This isn't problem Oracle D2K. ;)
  
  I did a report in Oracle PL/SQL. And, when I spool the data he fragments he came out in several lines. Despite I took in charge of the issues.
  
  Now, let me explain->
  
  I used a function in pipeline and store the result using the command of the coil.
  
  What I found strange, this is the type of object that is a clob data type is split in fact lines after 80 characters as in the case of string, it continues to 4000 characters.
  
  Now, in my solution, ordering channels made big role as all the lines indicate a different meaning and so pinched the data accordingly.
  
  I did a small test in that regard, and I am paste here that - because I am not allowed to post here my original due to the policy of the company code.
  

  scott>select * from v$version;
  -----------------------------------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
  PL/SQL Release 10.2.0.3.0 - Production
  CORE    10.2.0.3.0      Production
  TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
  NLSRTL Version 10.2.0.3.0 - Production
  
  Elapsed: 00:00:00.18
  scott>
  
  scott>create table clob_dummy
    2     (
    3       cola clob
    4     );
  
  Table created.
  
  Elapsed: 00:00:04.40
  scott>
  
  scott>insert into clob_dummy values('&clb');
  
  Enter value for clb: Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdj
  dbs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh  shgghsga wshkwlsgsdklghlahgkh lahgkas
   lhks  kglaks gksh a
  old   1: insert into clob_dummy values('&clb')
  new   1: insert into clob_dummy values('Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio po
  
  1 row created.
  
  Elapsed: 00:00:00.08
  scott>
  scott>commit;
  
  Commit complete.
  
  Elapsed: 00:00:00.01
  scott>
  scott>select * from clob_dummy
    2  ;
  
  COLA
  --------------------------------------------------------------------------------
  Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjd
  
  Elapsed: 00:00:00.27
  scott>set long 400000
  scott>
  
  scott>set lin 2000    ---- As you can see i've set the linesize to 2000
  
  
  scott>
  scott>set serveroutput on
  scott>
  scott>
  scott>select * from clob_dummy;
  
  COLA
  --------------------------------------------------------------------------------
  Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjd
  bs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh  shgghsga wshkwlsgs
  dklghlahgkh lahgkas lhks  kglaks gksh a
  
  
  Elapsed: 00:00:00.11
  scott>
  scott>
  scott>select length(cola) res from clob_dummy;
  
         RES
  ----------
         199
  
  Elapsed: 00:00:00.08
  scott>insert into clob_dummy values('&clb')
    2  ;
  Enter value for clb: ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhldkhkhdkhkdhkdhkdkhkl
  hkddkhdkhdkl djhlkdkhdhkshlkd dkhdkhldsjhkslhjd eutywe 398863694 i230e ehgd ehglegighsihdlk eltiweyt
  ilhdhgehgisehbkd 
  old   1: insert into clob_dummy values('&clb')
  new   1: insert into clob_dummy values('ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhld
  
  1 row created.
  
  Elapsed: 00:00:00.03
  scott>
  scott>commit;
  
  Commit complete.
  
  Elapsed: 00:00:00.08
  scott>
  scott>select * from clob_dummy;
  
  COLA
  --------------------------------------------------------------------------------
  Enter value for clb: gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjd
  bs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh  shgghsga wshkwlsgs
  dklghlahgkh lahgkas lhks  kglaks gksh a
  
  ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhldkhkhdkhkdhkdhkdkhklh
  kddkhdkhdkl djhlkdkhdhkshlkd dkhdkhldsjhkslhjd eutywe 398863694 i230e ehgd ehgle
  gighsihdlk eltiweytilhdhgehgisehbkd
  
  
  Elapsed: 00:00:00.11
  scott>
  scott>
  
  ----- Still it is breaking the line after 80 characters. 

  Why is this it is break line after 80 characters? Alternatively, where I'm missing?
  
  But when I changed the varchar2 data type, it is good way.
  
  May I know what is the reason? Then I fixed using the clob data type? Or will I have to change to varchar2? Because, I need only single record line (any size is - this - but of course oracle time) when I wrap the output to a file.
  
  Please share your thoughts with me.
  
  Thank you.

  It may be related to longchunksize SQL layout * more. Have you tried a similar to your set linesize value assignment:

  set longc 2000
  

  It can also be bound to the version of SQL * more you use. I notice some differences between sqlplus (command line version) and sqlplusw (the windows gui version)

• Excel output report

  Hello
  After I opened a report Excel (new Report.vi) I can edit and save it without any problem.
  The problem I have now is that I do not know how to EXIT Excel after editing. The new Report.vi only gives a reference to 'report '. that I can't use to exit the Excel application.

  Thanks in advance
  Norick

  Hi Norick,

  If you use the Report.vi to have, there is an entry in option on this VI that will close the app for you.

  D

• With regard to the output report

  I developed the report XML can work successfully on the system but when I did that and the simultaneous launch then it is to show that 'Impossible to find the exit of the publication of this application' I checked several times but same error comes again & again.
  Can someone help me on this
  Thanks in advance...

  user13277628 wrote:
  I developed the report XML can work successfully on the system but when I did that and the simultaneous launch then it is to show that 'Impossible to find the exit of the publication of this application' I checked several times but same error back & again.
  Can someone help me on this
  Thanks in advance...

  Hi and welcome to the forum!

  I hope that your question relates to a specific theme and do not relate to the Oracle database
  Please post your question under the appropriate heading

• How to set the output of the report to the session variable

  Hello
  Is it possible to output report to the session variable value. If my report returns 1 row and 1 column.
  
  I have a dashboard command prompt where I select name, but I want to find the ID of the same name.
  This ID I want to move to a Fx column, to achieve this, I created an interim report and I got the code. Now my problem is how do I put this ID in the session variable.
  
  Please help if anyone knows...

  Have you read this:
  How to set the session / presentation in the repository variable variable

  Dashboard invites on Month Name but the report on the ID of the month filter:
  Re: Guest dashboard on the name of the month but the report on the necessary month ID filter

  If you have dashboard guest (name), then you can have that one report that is filtered by a name but present card to display or not id but use id in the service. Or two reports as in the solution in the second link above and the second report has id in the function and filter by the id of the first report. You need not define this ID in the session for this example variable.

  Please close your previous discussions, if they are treated.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Several numerical limit hide the exits "Unused" in the test report

  Hello

  I have a question about several limit test digital and output report in ascii txt format:

  Example of a measure, that's what I see in the txt file:

  Measure [74]:
  Limits:
  Low: 4.75
  Top: 5.25
  LowExpr: "
  HighExpr: "
  Units: V
  Comparison type: FROZEN (> =)<>
  CompExpr: "
  UseCompExpr: false
  Data: 5
  Status: passed

  Is there anyway I can hide or "understand" the unused portion of the output?  In this case I have LowExpr, HighExpr, CompExpr and UseCompExpr.  It will be cleaner and easier to navigate... basically this report:

  Measure [74]:
  Limits:
  Low: 4.75
  Top: 5.25
  Units: V
  Comparison type: FROZEN (> =)<>
  Data: 5
  Status: passed

  Kind regards

  Mike

  You're probably missing an indicator which is supposed to be there for some properties (i.e. PropFlags_DontCopyToResults). I don't see enough detail in your screen to see why this is happening, but if you enlarge the column in the middle or mailed this that all expressions are you using, I might be able to see what is happening. You can manually / programmatically readd this indicator for some properties, but it should really be configured by default on the expr properties already so I don't know why it isn't in your use case. The steptype sets the flag when running on the LowLimit and HighLimit are used as necessary for the case in which only one or no limit. It is generally expected the flag already set the other properties in need at the time of publishing.

  You can view the source code at:

  TestStand\Components\StepTypes\CommonSubsteps\

  to see how the type of step limit multinumeric sets the flag.

  Hope this helps,

  -Doug

• Select the line of the classic report to pass the value to another classic report on the same page

  Hello

  First a few details about the environment - I use the image of the last download oracle VM developer days to oracle.com. This includes DB version 12.1.0.2 and version 4.2.5.00.08 Apex. For the question although I don't know the specifics of the versions that are relevant.

  What I want to do an apex page which includes an analytical section at the top, followed by a section of retail slot - a line is selected / highlighted at the top which causes the relevant lines in this summary line is displayed. Its screen basically a master-detail - however the source of these two sets of data is just a query - is not a table.

  The query at the top of the page is something like

  Select * summary

  and the section below is

  Select * from details where id = (the value of the id clicked in the summary above)

  This feels like it should be really easy (and indeed, it is for the tables through the apex of master-detail Wizard) - but I can't understand when the two sets of data are the result of queries.

  I can't seem to make reference to the elements of the page when it comes to a report and I think that I might need to go down a kind of dynamic route of actions and jquery, but I don't get very far very fast. I found some notes that seem similar, but nothing which does exactly what I want. The function APEX_APPLICATION to browse a table also doesn't seem to be possible for the output report that I could see (tags are not there) - what is relevant for the forms?

  I hope that I have explained that quite simply.

  Can anyone help?

  See you soon,.

  Rich

  You link column can be just a null value in the sql code, if you want. Change the column and head down to the link attributes.

  Text link: "Click me" (source of sql using #MY_COL columns or #)

  Target: URL

  URL: javascript: $s ('P1_ITEM', #ID);

  Then have onChange dynamic action on P1_ITEM which updates the State. Do not forget to present the value of session state (either property right under the sql or pl/sql prior to update action report). The database needs to know the value of browser before running the query.

• Question HFR - Page number does not appear in the output

  Hello

  I'm on HFR 11.1.1.3 version. I created HFR report via the HFR studio and included the < < < card > > > function in the bottom to display the page number. When I run the report in PDF format, the page number is not displayed in the output report.

  Please can you help me solve this problem.

  Thank you

  Michel K

  I added the Page function in the report and now I am able to see the page number in the report. I created the book for these new reports and when I ran the book, I could not able to see the page.  I've recreated the book again once and got the page number.

  Thank you

• Report fails with "Exception calling"ReadNextEvents"

  I use get-vieventplus to get the events of the multiple vCenters on the same report.  The report runs everyday and never complete.  He eats all the RAM on the virtual machine, it runs on - same 12 GB of RAM, even if nothing else is running on this virtual computer, but this report.  When I look at the performance table I can see it go of almost no use of the RAM before the report, then quickly to consume all the RAM on the virtual computer runs on the report, and then continues almost 100% RAM usage for days.    When I connect I see this error on the console of the PowerShell ISE.  The error seems to be repeated several times.  The error points to 163 of the get-vieventplus function line.  I pointed out line 163 designated.  Also, I've included the report below:

  #Define and connect to vCenters

  $vcenters = "vcenter1", "vcenter2", "vcenter3", "vcenter4".

  SE connect-VIServer-Server $vCenters - user user1-password password1

  Write-output "Connect-VIServer Complete."

  #This section defines the variables $start and $finish

  Write-output "previous month calculation Variables.

  $now = get-Date-time-Minute 0 - 0 - 0 second

  $daysBack = - $now. Day + 1

  $Start = $now. AddMonths(-1). AddDays ($daysBack)

  $DaysInMonth = [DateTime]: DaysInMonth($Start.Year,$Start.Month)

  $Finish = $Start.AddDays ($DaysInMonth)

  #Capture all events that represents creating a new virtual machine

  #For the specified time range

  Write-output "Getting VIEventPlus events"

  $report = get-VIEventPlus-start $start - finishing $finish |

  Where-Object {"VmCreatedEvent", "VmClonedEvent", "VmDeployedEvent" - contains $_.} GetType(). Name} | %{

  Write-output "VIEventPlus events captured.  Iteration on events %{}.

  $evtThisNewVMEvent = $_

  #Determine if the virtual machine is still in the inventory.  Otherwise, put an end to the current iteration

  Try {}

  $vm = get-VM-Id $_. Vm.VM - ErrorAction Stop

  Write-output "Try Clause.

  }

  Catch {}

  Write-output "Catch Clause.

  return

  }

  $vm | Select «-»,

  @{N = 'The virtual computer name'; {E = {$_.name}},

  @{N = "vCPUCount"; E={$_. NumCPU}},

  @{N = "MemoryGB"; E={$_. MemoryGB}},

  @{N = "guest operating system"; E={$_. Guest.ToString (). "Split(":") [1]}},"

  @{N = "ProvisionedSpaceGB"; E = {[math]: Round (($_.))} {{(ProvisionedSpaceGB), 1)}}.

  @{N = "UsedSpaceGB"; E = {[math]: Round (($_.))} {{(UsedSpaceGB), 1)}}.

  @{N = "FreeSpaceGB"; E = {[math]: Round (($_.))} ProvisionedSpaceGB - $_. {{(UsedSpaceGB), 1)}}.

  @{N = "Current host ESXi"; E = {$_.vmhost.} Name.Split(".") [0]}},

  @{N = "vCenter Server"; E={$_. "Uid.Split(":") [0]." {{Split("@") [1]}},

  @{N = "Createduserid"; {E = {$evtThisNewVMEvent.createdTime}}.

  @{N = "created by";} {E = {$evtThisNewVMEvent.UserName}}.

  @{N = 'VMID'; E = {$_.vm.vm}},}

  @{N = "Original ESXi host"; E={$_. VMHost.Name.Split(".") [0]}}  

  } | Sort-Object Createduserid

  Write-output "' $report object creation completed.» ' Variables compensable Total.

  $totalVMCount = $report.count

  $totalvCPUCount = [math]: round (($report |)) Measure-object-property vCPUCount-sum | (Select amount - ExpandProperty), 1).

  $totalMemoryGB = [math]: round (($report |)) Measure-object-property MemoryGB-sum | (Select amount - ExpandProperty), 1).

  $totalProvisionedSpaceGB = [math]: round (($report |)) Measure-object-property ProvisionedSpaceGB-sum | (Select amount - ExpandProperty), 1).

  $totalUsedSpaceGB = [math]: round (($report |)) Measure-object-property UsedSpaceGB-sum | (Select amount - ExpandProperty), 1).

  $totalFreeSpaceGB = [math]: round (($report |)) Measure-object-property FreeSpaceGB-sum | (Select amount - ExpandProperty), 1).

  Write-output 'Total Variable calculation finalised. Average compensable variables.

  $avgvCPUCount = [math]: round (($report |)) Measure-object-property vCPUCount-medium | Select average - ExpandProperty), 1).

  $avgMemoryGB = [math]: round (($report |)) Measure-object-property MemoryGB-medium | Select average - ExpandProperty), 1).

  $avgProvisionedSpaceGB = [math]: round (($report |)) Measure-object-property ProvisionedSpaceGB-medium | Select average - ExpandProperty), 1).

  $avgUsedSpaceGB = [math]: round (($report |)) Measure-object-property UsedSpaceGB-medium | Select average - ExpandProperty), 1).

  $avgFreeSpaceGB = [math]: round (($report |)) Measure-object-property FreeSpaceGB-medium | Select average - ExpandProperty), 1).

  Write-output "adding custom properties.

  $report += new-Object PSObject - property @ {}

  "-----" = "------------"

  }

  $report += new-Object PSObject - property @ {}

  "-" = "Totals".

  "Name VM" = $totalVMCount

  "vCPUCount" = $totalvCPUCount

  "MemoryGB" = $totalMemoryGB

  "ProvisionedSpaceGB" = $totalProvisionedSpaceGB

  "UsedSpaceGB" = $totalUsedSpaceGB

  "FreeSpaceGB" = $totalFreeSpaceGB

  }

  $report += new-Object PSObject - property @ {}

  "-" = "Averages".

  "vCPUCount" = $avgvCPUCount

  "MemoryGB" = $avgMemoryGB

  "ProvisionedSpaceGB" = $avgProvisionedSpaceGB

  "UsedSpaceGB" = $avgUsedSpaceGB

  "FreeSpaceGB" = $avgFreeSpaceGB

  }

  write-output $report

  Here is the real function of get-vieventplus with the line highlighted that the error indicates:

  {in process

  $eventnumber = 100

  $events = @)

  $eventMgr = get-view event Manager

  $eventFilter = new-Object VMware.Vim.EventFilterSpec

  $eventFilter.disableFullMessage =! $FullMessage

  $eventFilter.entity = new-Object VMware.Vim.EventFilterSpecByEntity

  $eventFilter.entity.recursion = & {if ($Recurse) {'all'} {'home'}}

  $eventFilter.eventTypeId = $EventType

  If ($Start - or $Finish) {}

  $eventFilter.time = new-Object VMware.Vim.EventFilterSpecByTime

  {if ($Start)}

  $eventFilter.time.beginTime = $Start

  }

  {if ($Finish)}

  $eventFilter.time.endTime = $Finish

  }

  }

  If ($User - or $System) {}

  $eventFilter.UserName = new-Object VMware.Vim.EventFilterSpecByUsername

  {if ($User)}

  $eventFilter.UserName.userList = $User

  }

  {if ($System)}

  $eventFilter.UserName.systemUser = $System

  }

  }

  {if ($ScheduledTask)}

  $si = get-view ServiceInstance

  $schTskMgr is get-view $si. Content.ScheduledTaskManager

  $eventFilter.ScheduledTask = get-view $schTskMgr.ScheduledTask |

  where {$_.Info.Name - match $ScheduledTask} |

  Select - 1 first |

  Select MoRef - ExpandProperty

  }

  {if(!$Entity)}

  $Entity = @(get-dossier-nom deles de centres de données)

  }

  $entity | %{

  $eventFilter.entity.entity = $_. ExtensionData.MoRef

  $eventCollector = get-view ($eventMgr.CreateCollectorForEvents ($eventFilter))

  $eventsBuffer = $eventCollector.ReadNextEvents ($eventnumber)

  {while ($eventsBuffer)}

  $events += $eventsBuffer

  $eventsBuffer = $eventCollector.ReadNextEvents ($eventnumber)

  }

  $eventCollector.DestroyCollector)

  }

  $events

  }

  }

  

  The Get-VIEventPlus function does not support connections to servers multiple vCenter. You must run this function so that only a single vCenter that Server is connected.

• Simple VM report

  For some reason any this script only records on the last vm in the csv file.  Probably my misuse of the first 'foreach '.  Any help would be appreciated.

  $curvc = read-host-prompt "enter the name of VC.
  to connect-viserver-Server $curvc

  $vms = import-CSV.\name_dev.csv

  foreach ($vm in $vms) {Get - VM $vm. Name |
  {foreach}
  $Report = "" | Select-Object - property, NumCpu MemoryMB, Host name
  $Report.Name = $_. Name
  $Report.NumCpu = $_. NumCpu
  $Report.MemoryMB = $_. MemoryMB
  $Report.Host = $_. VMHost
  Write-Output $Report
  } | Export-Csv ".» \VM.csv ".
  }
  disconnect-viserver *-confirm: $false

  I think it's as simple as click on one of the buttons at the bottom of a useful answer or correct answer response

• Financial reports of task list Launcehd lose PDF option

  Environment:

  Hyperion Planning & SmartView v 11.1.2.1

  Question:

  We have lists of tasks in the Planning Application which run reports generated in EN Studio.
  Users have their preference for "Default Preview Mode" set to HTML.

  When we have open/preview a report from the list of tasks users lose the Option to 'open in PDF format.

  The only way to obtain output reports as PDF from the list of tasks is for the user to change their preference for the "default Preview Mode" in PDF format.

  Question:

  Y does it any way users can switch between output HTML and PDF reports from their to-do list?

  Thank you very much

  PW to MacMillan

  Do not use the browse url button

  Your of will be like http://MYSERVERNAME:19000/workspace/WorkspaceLaunch.jsp?uri=index.jsp%3fmodule%3dwksp.relatedcontent%26repository_path%3d%2FNPG3%20Reports%2FNPG%20Forecast%20Reports%2FStaff%20Costs%2FUKFC-SC1-test

  I don't know if the path is correct.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Bill of lading, air waybill report

  Hi gurus,
  
  I raised THEN, picked, shipped, while ship to confirm, system-generated 5 programs simultaneously, complete except Bill of Lading, waybill getting output report as empty, no data appears in the report.
  
  If I want to see the data in the report of these two, which updated in the fields are SO form, form shipping?
  
  Are there settings / profile of the options to achieve this goal?
  
  Please advise.
  
  Concerning
  AK

  Hi, AK,
  As told by dadi, 1 is to define the category of Document for the two "Bill of Lading" and "delivery".
  Here, you mention the name of the category and the name of the Document, the sequence of the doc...
  (nav:Shipping--> installation--> Documents--> categories of documents)

  Then assign the document sequence for these 2 categories.
  (nav:Shipping--> installation--> Documents--> assign sequences)

  Since they are already defined in the document set, you will now be able to see the output of these 2 reports.

  Thank you
  -Arif.