Lenovo R61e, Win XP Pro + 4 megs memory?

Similar Questions

• How to enable the memory full use in Win 7 Pro 64 Bit OS

  Hello.

  I have a desktop with Win 7 Pro 64 bit and its installed with 8Gigs of RAM above, but when I check in the properties of the computer it shows only 8 GM installed and 3.86 inuse.

  Can anyone suggest me how to get the memory of 8 GB in use. ?

  Concerning

  Ishaan

  Why do you need to use all of your RAM?

  Are you trying to find how to use "RAMDisk"? The link below is for one of the
  software available. A search can find a free version.

  http://memory.Dataram.com/products-and-services/software/ramdisk

  The first I've heard talk of RAMDisk was today in the thread below.

  "You not use RAMDisk?
  .

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

• P50 win 10 Pro - footprints digital has stopped working

  Hi all

  I just got my P50 (20EQS00600, M1000M, i7-6700HQ, 16 GB of RAM, 512 GB SSD) about a week ago and I quite like it. However, there is one thing that drives me crazy: after that I upgraded to Win 7 Pro 64 bit for win 10 Pro, the fingerprint feature has stopped working. This issue seems to be related to those reported in these two threads for the P70, but at the same time appears sufficiently different to warrant a new post:

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/P70-fingerprint-software-issue/m-p/22517...

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/fingerprint-and-sound-problems-P70/TD-p/...

  So, here is what I did:

  (1) I correctly installed Win 10 w/o retaining data/settings from the previous installation of Windows 7; I even reformatted the SSD drive.

  (2) for the initial installation, was asked by Windows Hello register prints I've done.

  (3) fingerprint worked during the first connection, but then disappeared as if by magic. Hello Windows is no longer appears as a connection option in the control panel of Win.

  (4) I found in Device Manager the Synaptics WBDI reported the following problem: "this device cannot start. (Code 10) ".

  (5) repeated uninstall and reinstall drivers are without success. I tried both have Win a driver and manual to install the drivers I downloaded from Lenovo page.

  (6) when I uninstalled the drivers and then wiped the fingerprints stored in the BIOS, I was again able to register fingerprints with Windows Hello. However, this time the fingerprints were not yet registered in Windows, and I had to cancel the procedure. Immediately after, the Synaptics driver stopped working, cf. 4).

  I am at a loss what to do. Strange thing is that I ran Win 7 for about a week, and the fingerprint reader worked fine all the time. (Due to the scaling of the questions on my 4 k screen, I bit the bullet and went to win 10, in case you're wondering.)

  So everyone out there has the same problem, does anyone have a solution?

  Thank you in advance and the best,

  A

  
  

• ThinkPad edge E530 to Win 8 pro upgrade failed

  I tried to update my E530 to Windows 8, but the installation stops at 29%, any help?

  Take a look at this thread: http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Cannot-upgrade-to-win-8-pro-on-thinkpad-twist/m-p...

  You can try the steps in the post #2, because they seem to have worked in a similar situation.

  Kind regards.

• SL510 win 7 pro 64 plus wireless?

  OK, I'm going a little crazy here. Yesterday I received my win 7 pro 64 bit lenovo recovery disks. After about 3 hours installation and update, everything is great. My sl now uses 7.84 the 8 GB of ram, I installed. I arrested him for the night and when I come home from work the next day my wireless is now on the fritz. Apparently the wireless itself radio turns off. If I switch on the front side manual wireless switch right radio will always light. It will only turn on if I go through the whole diagnose routine problem that irritating suggests then I applied the fix to turn on my wireless... 5 minutes later the radio wireless magically turns off again. I made sure I have the latest version of the driver and even tried to roll back the driver. Any help would be, as always, be appreciated!

  OK, a full stop was apparently the fix. I was restarting all the time, but after a total stop and a break, I came back energized and everything seems to go well until now. I'll post again if the problem resurfaces.

• Win XP PRO freezes

  After starting the system, system idle for 30 minutes, tool bar disappears and Win XP PRO freezes, the only solution is to restart the computer.

  no error or warning code. no response from the keyboard, the mouse works, the background remains unchanged.

  Hi Rainman,

  ·         Have you made changes on the computer before this problem?

  ·         When exactly the computer freezes?

  ·         You get the error message?

  ·         What amount of RAM (Random Access Memory) is installed on the computer?

  Follow these methods.

  Method 1: Check the event viewer for related event logs.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow the steps to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Install the latest windows updates.

  How to configure and use automatic updates in Windows

  http://support.Microsoft.com/kb/306525

  Kind regards

  Chauvet J.

• can I switch from win xp pro sp3 Windows XP Professional x 64

  I have an old computer Pentium (32 bit system) (2001) with max memory 2 GB and I wish to Exchange my c: drive to a new 64-bit computer that has the capacity of up to 16 GB of memory.  I am currently using win xp pro sp3 and I don't want to move to Vista or 7 because I'm very comfortable with win xp pro screens.  I'm assuming that win xp Pro x 64 edition is similar for win xp pro in that regard.  Current box has four scsi drives, 2 CD/DVD, 4 pci for creating music cards readers, card Radeon video (2 screens), 2.2 GHz Intel Pentium CPU, 2 GB memory Rambus.  I'm go to Gigabyte GA45T-ES3G-ATX, CPU 3.0 Ghz 775, 16 GB memory Kingston Hyper X, videocard PNY 450NVS Quadro (4 screens), 2 SSD drives (100(c drive)/500 GB).  I opted for the Gigabyte motherboard because it has a pcie x 16 video card and 5 pci slots.  I use software Cakewalk mainly which has a capacity of 64-bit and some of my cards have drivers 64-bit available.  Other software will be able to run in 32-bit mode (x 86).

  My plan is to clone the c: drive current, load it on the new ssd drive and upgrade to Win xp Pro x 64 load if possible.

  Andrea

  First and most importantly, there is no way to upgrade from XP 32 bit to 64 bit, you must perform a "clean installation" of the 64-bit version and then reinstall your applications. Don't forget to back up your data files.

  Secondly because the card mother old and new are very different (device drivers and chipset), it is unlikely that, after cloning your hard drive to an SSD, the computer would even start.

  I'd rather you 32-bit version of Windows XP is a 'Reticular Full' version (OEM versions are related to the 1st motherboard it is installed on and can not be activated on another motherboard) is to reinstall XP 32 Bit to one of your SSD drives (you did not mention RAID), then install the drivers from Gigabyte.

  If you must go the 64-bit road know that 64-bit XP was not very well supported by software vendors and is not widely used.

  Also note that this socket 775 motherboard uses memory DDR3 and no common DDR2 for cards 775 mothers socket.

  J W Stuart: http://www.pagestart.com

• Can Win XP Pro on the Packard Bell System evolve?

  HY. I USE a PACKARD BELL INTEL (R) PENTIUM (R) DUAL CPU * address email is removed from private life * 2.00 GB of ram AND I want TO DO AN UPGRADE. CAN I DO IT? IF SO, HOW? I HAVE WIN XP PRO. SP 3... !

  You plan to upgrade to Vista or Windows 7.

  If the answer is Vista, and then you perform an upgrade on the spot, that will keep all your applications and data intack. Note the bare minimum of RAM/memory you need for Vista is 2 GB and it runs slower than XP.

  If the answer is Windows 7, then your only choice is a "custom" / Clean install which means that you must back up all your data file (on external support) and then once the upgrade is complete and then install applications. ". Memory required for Windows 7 are 1 GB for 32-Bit OS or 2 GB for the 64-bit operating system.

  You must run the compatabily Windows 7 checker before doing anything: Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows XP to Windows 7 Migration Guide
  http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  Also: Check Windows 7 device drivers available for your make and model. If there is no drivers then chances are one or more device (LAN, sound, Etc.) may not work.

  As always, make a backup of the Image of your external hard drive USB driver before you start the actual upgrade.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Installation Win 7 Pro 64-bit

  Greetings:

  I have a X 200 7448 - CTO preloaded with Win 7 Pro 32 bit.

  Would it not possible to install the 64 bit on my system?

  Any input is much appreciated.                  `

  Yes it is fully supported. You can approach this upgrade in several ways.

  1. If you want to keep the recovery to win 7 pro 64-bit partition, so you can order the 64 bit version of the media of the Lenovo service recovery.

  2. If you do not care the recovery partition and want to keep the cost of upgrading to a bare (free by the way). Then download the iso 64-bit windows 7 here:

  http://Forum.NotebookReview.com/Windows-OS-software/428068-legal-Windows-7-download-links-just-like-...

  Then follow these instructions to install all drivers.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74108

• Need activation key for win 7 pro 00371-OEM-9102002-81000

  Need activation key for win 7 pro 00371-OEM-9102002-81000

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - XMPMX - K4YQ2-WYGJ8
  The Windows Product Key hash: pWK7ZHSjpAQDzU + klMpFT4x6FLM =
  Windows product ID: 00371-OEM-9102002-81000
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {5F13BCE3-6E18-43C3-BC06-13B669F40B8D} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.160121 - 1718
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {5F13BCE3-6E18-43C3-BC06-13B669F40B8D}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-WYGJ800371-OEM-9102002-810003S-1-5-21-3487097629-1122526968-1081289692LENOVOIdeaPad Z580 LENOVO5FCN35WW20120803000000.000000 + 00034293F07018400FE04090409Time(GMT-05:00) Standard is03LENOVOOC-01 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: d8e04254-f9a5-4729-ae86-886de6aa907c
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00182-020-081000-02-1033-7601.0000-0642016
  Installation ID: 013775973961729262157165777226896960616102218330893975
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: WYGJ8
  License status: initial grace period
  Time remaining: 10080 minute (s) on (7 day (s))
  Remaining Windows rearm count: 4
  Trust time: 04/03/2016 13:18:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 2:11:2016 14:42
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: MAAAAAEAAQABAAEAAAABAAAABAABAAEAln2Qiqo6LvLcjvSNzEIA1O5YRA5YwZZj

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO OC-01
  FACP LENOVO OC-01
  HPET LENOVO OC-01
  MCFG LENOVO OC-01
  SLIC LENOVO OC-01
  SSDT LENOVO PtidDevc
  ASF!   LENOVO-CB-01
  FPDT LENOVO OC-01
  SSDT LENOVO PtidDevc
  SSDT LENOVO PtidDevc
  UEFI LENOVO OC-01
  UEFI LENOVO OC-01
  POAT LENOVO OC-01
  UEFI LENOVO OC-01

  Try the following support group, maybe they can tell you why you touch
  (XXXXX-XXXXX-Y664G-28TWP-KWC2J) does not work.

  Technical support:
  Dial the 1-877-696-7786

  J W Stuart: http://www.pagestart.com

• can install win8 pro on a computer virtual vmware win 7 pro

  If my system supports upgrading to win 8 pro but I want:

  can install windows 8 pro desktop OS in vmware vm (virtual machine from oracle) (my system), win 7 pro desktop PC 4-core 16 GB RAM i5?

  If Yes

  Windows 8 can run visual studio 2013 + or windows phone 8 emulators (and emulators of Tablet)?

  If buying a touch screen should supported in windows 8?

  If my system supports upgrading to win 8.1 pro can do above for windows OS 8.1 pro?

  Hi lse.

  If you purchased Windows 8.1 or Windows 8, you can download and install Windows from this page using only your product key. You will have the option to install Windows now, later, or using media with an ISO file.

  Go to the Microsoft page for upgrading to Windows 8 with a product key, then click on the button 'install Windows 8' light blue.

  Once ISO finished download, the installation program will take several minutes to check download and unzip the installation files. When you are prompted to choose an installation option, choose "install by creating media".

  If you decide that the installer to create a support of USB flash drive, or save the ISO file.

  If you choose the ISO, the ISO file (Windows.iso) will be saved on your PC and you will be able to burn to DVD. Once done, you can actually go back and create the media to a USB flash drive as well. Just click on the link "Windows Installer" on your Windows desktop. You will be prompted to choose your option to install again. Choose "Install by creating media" again, insert a 4 GB or more large USB flash drive, then select flash memory reader. If you have problems creating USB flash support.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  To install Windows 8 on VMware refer to this link:

  http://PartnerWeb.VMware.com/GOSIG/Windows_8.html

  If you have problems to run VMware contact their support site at: http://www.vmware.com/support.html.

   

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• How to open my GMail on Firefox. Using Win XP PRO SP 3.0 32 bit

  I use WIN XP PRO SP 3.0, 32-bit
  How to access my account GMail using Firefox?
  I tend to forget all about my GMail, so need to read, a lot of emails, he...
  Please, I'm a novice user step by step please
  Thank you very much
  Sylvia

  Just type "gmail.com" into the URL in Firefox toolbar and press the Enter key on your keyboard. You can directly access the Gmail login page.

  Awesome Bar - Find your Firefox bookmarks, history, tabs in the address bar

• Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

  Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."

  This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.

  This started after I installed the 15.0.1 patch.

  I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.

  Is this a Firefox problem?

  My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.

  You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?