Outside LAN application does not connect to the users in the Group?

Similar Questions

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• (GET MORE) On a printer C309n Hp Photosmart Premium Web application does not connect to the internet?

  Hello everyone; Does anyone know why the app GET MORE on this printer Hp Photosmart Premium Web C309n does not connect to the internet? All other applications are connected ok. The site is down? someone knows something about it? HP is the fixation of this hopefully soon? Thanks for any info.

  I am very sorry for your difficulties.

  You can try the following, if you please, of your printer face:

  Setup (wrench on sceen House of printer)

  Web

  Updates

  Product updates

  Accept the update of product offered.

  Please let us know:

  (1) if he is offered an update of product, and if so, it ends correctly?

  (2) receives more work after the update?

  In the future you can keep your FW up-to-date more easily by selecting the option 'Automatically' for the settings of update of product in the update section of the product in the Web menu.

  Key

  Web

  Updates

  Product update settings

  Select "automatically".

• Why windows does not connect to the Group Policy client?

  I am currently using a dell inspiron with windows 7 Edition 7720 Home premium and recently a message started to appear above my taskbar saying

  "Unable to connect to a windows service.
  Windows could not connect to the Group Policy Client service. The problem prevents standard users to log on to the system.
  As long as administrator, you can go through the system event log to see why the service failed"
  Anyone know why this is happening and how to fix it?

  The resolution is quite easy. Ignore all these tech geeks here and on other sites that just want to show how they can play with the registers - a very dangerous game.  Go to search, type in cmd, open cmd as administrator.  Type exactly this (with the indicated spaces): netsh winsock repair, and then press ENTER. You need to restart (NOT close and turn on) your computer. Bingo! Unfortunately, this condition can re - occur from time to time, as if you start your computer before you turn on your internet connection and establish a good connection.  Don't worry the fix takes about 3 to 5 minutes depending on your speed of restart computer.

• The e-mail application does not connect to the Dreamhost servers. Perhaps because of how they configure their SSL certificate for their subdomains.

  http://wiki.DreamHost.com/Certificate_Domain_Mismatch_Error

  Certificate SSL of Dreamhost for their mail servers only at one level of subdomain while many of their clusters of e-mail exist on a second level subdomain. In my view, this translates into an error message 'bad security' of the e-mail application.

  I contacted DreamHost and they say they are unable to solve this problem, or that they will allow me to install an SSL certificate on my virtual domain pointing to my cluster e-mail (even if I had to buy a).

  I understand, it is possible to manually add certificates via adb in a way similar to this: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/

  However what I read this: 1. does not work on the ZTE Open 2. Can only fix only navigation not the web mail client.

  Is there any option that is available to me short of switching hosts?

  Fabian,

  Are you familiar with Firefox OS? The reason why I say this is because the e-mail client cannot create an excaption certificate. In fact, it's design. It's design: https://wiki.mozilla.org/Gaia/Email/Features#Security

  This request for support to Mozilla was placed specifically for the product Firefox OS, for which there is only a single mail client.

  That said many people in the Mozilla Bugzilla, have been able to show me how to find another alias for those servers that actually works and in fact corresponds to SSL certificates. Although Dreamhost support could not provide me with any such information, and such information is not actually in the DreamHost wiki.

  I have a repeated insistence of Dreamhost possibility I should just live with the exceptions of SSL certificate, when there is real existing valid server names to match the certificates in question, silly.

  The fact that you post this solution for one product, so that it is not yet applicable beyond useless. It serves to muddy waters.

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver

• HP8600 does not connect to the ePrint Server

  HP8600 does not connect to the ePrint server at all. I double checked all the settings and I can print to it from my applications when you are connected to the same network, but try to access the server of ePrint from the screen of the printer or the web interface cannot establish a connection.

  The printer is connected via a wireless network and can be printed from any device connected to our network.

  Everything indicates that there should be good. But can't seem to make bad connection ePrint. No error message not developed.

  The printer is on a network of b/g/n 2.4 GHz connected to a Netgear N600 DUal Band (WNDR3700 model).

  Version of the firmware of the printer is CLP1CN1232AR

  Any ideas? It does not appear to be blocked by a firewall, so really lost here.

  Hello

  Try to define an alternative DNS and check if that can help you:

  1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
  2. Navigate to throguh IP of the printer, the web browser on your PC.
  3. Click the network tab.
  4. Under, click IPv4 wireless.
  5. Under the DNS Configuration, select manual.
  6. Set the address preferably as 8.8.8.8
  7. Set the e-mail address alternative as 8.8.4.4
  8. Click on apply to confirm the change.

  Now, turn the printer off and turn it back on and check for the difference.

  Shlomi

• Z580 does not connect to the Internet at the beginning

  I recently bought a laptop Lenovo Z580, I'm running Windows 7 on it, and the problem it is that it does not connect to the Internet initially once I start my computer, although I will be connected to the LAN. When I try to diagnose the problem, I get the error message below.

  "Your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  If I run the diagnostic tool for a couple of times, the problem is resolved automatically (and not by the Diagnostic tool). This problem does not occur with my friends that connect to the same network.

  I had a similar problem and it was mcafee, I now run kaspersky and the internet is instant.

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Bought LR6 DVD but the installer does not connect to the internet for I can register it.  I downloaded the trial version to work around this problem, but I can't get the program to start.  I get the same message that I should connect to the internet and c

  Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record.  Internet works fine.   I have Adobe account.

  I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start.    I get the same message that I should connect to the internet and connect.  It seems impossible after 3 hours.  Spent an hour chatting with the support of the India.

  Also remove the cookie file and reg Lightroom then enter the serial number and check.

  Windows:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  programdata %

  It will open the ProgramData folder. inside locate Adobe folder.

  Go to Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

  Mac:

  (1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

• dynamic link does not connect with the aftermath?

  Dynamic link does not connect with the aftermath?

  Hi Robert,.

  Dynamic link works between versions of similar applications. Make sure you have the same version of both applications.

  For example, Premiere Pro CC 2015 won't work in dynamic link with after effects CC 2015

  First Pro CC 2014.2 will work in dynamic link with after effects CC 2014.2 and so on...

  Thank you

  Regalo