ox80070035 error - cannot access \\network\filename
Hi, I have 2 windows 8 pcs and Windows XP. I can't create a homegroup because of the XP machine. I can't seem to get the network to recognize the Windows 8 machines, the XP was fine until tonight and now I can't access those files either. I have been working on this for months and was even a company with their technicians watch the. Is any and all of the advanced settings are correct.
Are all correct sharing permissions, not only in the sharing properties, but they are all correct file access permissions in NTFS file access security permissions too?
You are using a wireless network? If so try to connect through an Ethernet cable for testing purposes.
In Windows 8 make sure all the settings as the network discovery are correct in control Panel\All Control Panel Items\Network and sharing Center.
In XP check that "Sharing files and printers for Microsoft Networks" are checked in the properties of the network connection to the relevant map.
Enabling File And Printer Sharing in Windows Xp
http://www.bleepingcomputer.com/forums/t/47775/enabling-file-and-printer-sharing-in-Windows-XP/
It may be necessary to disable the Windows Firewall, or indeed uninstall any third-party firewall, in order to eliminate these as a cause.
Tags: Windows
Similar Questions
-
Error: cannot access dead object
[JavaScript application] Error: cannot access dead object.
This message appears repeatedly after using Gmail, sign out, close the tab, then open a new tab.
Uploadd disabling Drag & Drop appeared to be... on my 7 machine. Now for my Vista laptop. Thank you.
-
BlackBerry Classic error - cannot access media library
Since buying classic BlackBerry, I was unable to view the images, music, videos. I get the message 'error, cannot access the media library. I met a few suggestions to this problem on the Web sites and tried them but still no joy. I tried to telephone support BlackBerry, but no matter which option I pressed, he simply repeated the options. A solution to this problem has been found?
yvonnec1 wrote:
Since buying classic BlackBerry, I was unable to view the images, music, videos. I get the message 'error, cannot access the media library. I met a few suggestions to this problem on the Web sites and tried them but still no joy. I tried to telephone support BlackBerry, but no matter which option I pressed, he simply repeated the options. A solution to this problem has been found?
Hi @yvonnec1! Welcome to the community of BlackBerry Support Forums!
You don't mention what specific solutions you have tried already, if I may say so things that you've already tried. Have you seen this KB: KB33501 ?
-
Why my VPN clients cannot access network drives and resources?
I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!
: Saved
:
ASA Version 8.2 (5)
!
ciscoasa hostname
Cisco domain name
activate the password xxxxxxxxxxxxx
passwd xxxxxxxxxxxxxxxxx
names of
name 68.191.xxx.xxx outdoors
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.201.200 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address outside 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
192.168.201.1 server name
Cisco domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network obj - 192.168.201.0
FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0
NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0
FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any
Extended access list-NAT-FREE enabled a whole icmp
allow any scope to an entire ip access list
allow any scope to the object-group TCPUDP an entire access list
allow any scope to an entire icmp access list
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access allow TCPUDP of object-group a
inside_access_in list extended access permit icmp any one
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access allow TCPUDP of object-group a
outside_access_in list extended access permit icmp any one
Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0
access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0
inside_nat0_outbound list extended access permit icmp any one
inside_nat0_outbound_1 of access allowed any ip an extended list
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 192.168.201.0 255.255.255.0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1
Route inside 0.0.0.0 255.255.255.255 outdoor 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.201.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs xxx
Proxy-loc-transmitter
Configure CRL
XXXXXXXXXXXXXXXXXXXXXXXX
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
allow inside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
Cisco by default field value
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
WebVPN
SVC request enable
internal KunduVPN group strategy
attributes of Group Policy KunduVPN
WINS server no
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Cisco by default field value
username xxxx
username xxxxx
VPN-group-policy DfltGrpPolicy
attributes global-tunnel-group DefaultRAGroup
address VPNIP pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
type tunnel-group KunduVPN remote access
attributes global-tunnel-group KunduVPN
address (inside) VPNIP pool
address pool KunduVPN
authentication-server-group (inside) LOCAL
Group Policy - by default-KunduVPN
tunnel-group KunduVPN webvpn-attributes
enable KunduVPN group-alias
allow group-url https://68.191.xxx.xxx/KunduVPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc
: end
don't allow no asdm history
Hello
What is the IP address of the hosts/servers LAN Gateway?
If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.
For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.
- Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
- Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
- Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
- Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
- Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP
So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)
I would like to know if the installation is as described above.
-Jouni
-
Error: HELP.
I tried to install Itunes on my laptop since 03:00 this afternoon. He repeats to me "could not access network location %APPDATA%\protector.exe. I tried all the shortcuts and the scannow process, but still nothing. It is very annoying. How can I fix it? (the windows version is vista Home premium)
Hello
Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?
If you don't have anything done, see if this information helps you.
"Not to install iTunes or QuickTime for Windows"
http://support.Apple.com/kb/HT1926
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
If the advice already given does not, please contact Apple for assistance.
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
Hello
When I open the Windows 8 Xbox music app I can't connect. Here's the exact error code."Cannot access the file. Make sure that the file is not in use, you can access the file is stored, and that your network proxy settings are correct, and then try again.Error code: 0xc00d11d2 (0x80070005)I can sign in all other Windows 8 modern Apps without problem.Thank youAndyI created a local account and recreated my Windows Live profile and that fixed the issue.
Thanks for your help. -
Blue screen error CANNOT ACCESS HARD DRIVE SPACE
I'm trying to install windows xp after removing windows 8 of my computer and creat new partition using the boot disk windows 98se, fdisk, but the installation during windows startup I get in trouble when get a blue error message screen telling"YOUR COMPUTER'S STARTUP PROGRAM CANNOT ACCESS THE DISK THAT CONTAINS THE PARTITION FREE SPACE, YOU CHOOSE. CANNOT INSTALL WINDOWS XP ON THIS HARD DRIVE. »Image of the screen available message if necessary. There is no error due to this error code.Please help me to solve the problem, and I'll be really thankful to you.Kind regardsKayFirst of all, you need not use a setup of Windows 98 to work partition disk before installing Windows XP, Setup of Windows XP has the tools to do this job.
Windows XP Setup cannot see the hard drive as it doesn't have drivers for the SATA controller on board. To install Windows XP you must go into the BIOS and put the hard drive in IDE mode you will need to integrate the SATA drivers in the XP installation CD, or you need to feed them to the Windows XP Installer with a floppy using the F6 method drive.
Your new PC does support Windows XP, it has Windows XP drivers available for it? If this isn't the case, you will have a lot of crying by train to get there.
John
-
When install or remove a product, get error cannot access the windows installer
Whenever I'm installing an update or remove a product, I get the message "Cannot access Windows Installer"
Hello
· What are the programs you are trying to install on the system and updates?
· Have you managed to install the updates before on the system without any problems before?
· Remember to make any change to the system?
I suggest you follow the steps mentioned below.
Method 1:
I suggest you to check in services if the service Windows install is set to automatic. Follow the steps mentioned below.
a. Click Start--> Run--> "services.msc" [press on enter]
b. scroll down and find "Windows Installer".
c. right-click on it and choose "Properties".
d. on the properties page, verify that the "Startup type" is set to 'Automatic'
e. confirm the "Service status" is "started."
f. click "OK".
Method 2:
I suggest you unregister re-register Windows install and check if it helps. Follow the steps mentioned in the article below.
Error message "Could access the Windows Installer Service" when you install the application
http://support.Microsoft.com/kb/319624
Method 3:
I suggest you to reset the windows update components and check. Follow the steps mentioned in the article below.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 4:
I suggest you to download and install Windows install from the link below and check.
Windows install 4.5 Redistributable
I suggest you follow the steps mentioned in the articles given below for further assistance.
Error message "Could access the Windows Installer Service" when you install the application
http://support.Microsoft.com/kb/319624
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
HP 190 t and cannot access network after upgrade to win 8
Upgrade to Windows 8 and cannot access the internet on my desktop HP 190 t. No driver available on the HP support site. I can see received/transmitted data between router but that is as far as it goes. Have ideas or how to get the chipset drivers or should I get another network card? Everything else seems to work very well.
I found the problem. Norton Security Suite does not work with Win 8, causing conflicts. I have remove the application configured defender and firewall Windows to maintain security until Norton product can support 8 Win.
-
Domain user on the laptop cannot access network folders
I have a user who has a laptop with Windows 7 Pro. The laptop is on the field. A week ago, some of its readers mapped network disappeared from his window of the computer - they have been set up with a logon script. When I tried remap readers, I got an error that the readers were already mapped with other identification information.
I tried to use wired and wireless and disabling NetBIOS. I tried to sign up with my own account, and after that my profile has been created I was able to access network drives without any problems, that tells me that this isn't a hardware problem.
I took a look in C:\Users and found 2 records for his profile, one named [username], another named [username]. [domain]. The [user name]. There is a padlock icon that tells me that it is the account currently being logged record [field]. However, records (e.g. office) are all empty, so it is somehow redirecting to the files under the profile of [username]. I backed up and deleted the registry key for its profile and restarted the computer, but this only created a NEW temporary folder called [username]. [domain]. 000.
Short to save all files in [user_name] and suppression of all profiles or do a clean install of Windows is there anything else I can try?
When I tried remap readers, I got an error that the readers were already mapped with other identification information.
-> The command console
net use
tell you what actions are mapped. And the console command
NET use * / del
Removes all existing connections to share.
I tried to use wired and wireless and disabling NetBIOS.
-> Ping your server would immediately you tell if you have network connectivity.
The [user name]. There is a padlock icon that tells me that it is the account currently being logged record [field].
-> How to lock that only takes into account with administrator privileges have access to this folder.
I backed up and deleted the registry key for its profile and restarted the computer, but this only created a NEW temporary folder called [username]. [domain]. 000.
->, You can force Windows to use a given profile folder manually by setting the name of the folder here:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList\S...\ProfileImagePath
Search for the incorrect path name (. domain.000 [username]), and then change the path.
Your questions are indeed more suited for a TechNet forum.
-
one of the VM cannot access network LAN
Hello
I configured 3 VM on an ESXi 4.1 (see attached jpg file). one of the virtual machine (GSPPBPCDBVM), it cannot access the network LAN, even cannot ping Bridge but can ping GSPPBPCVM after I walk today, previously, it was ok. The other 2 VM can access LAN network. What could be the problem?
GSPPBPCVM (128.1.8.x)
GSPPBPCDBVM (128.1.8.x)
AEPAD (10.8.1.x)
vmnic1 (to connect to the local network virtual 128.1.8.x)
vmnic0 (to connect to the local network virtual 10.8.1.x)
Thank you and best regards,
Kelvin
With the configuration you have posted, you have a 50/50 chance that none of your VM will have access to the network, since you have 2 NICs connected to two different VLANS and virtual machines are assigned to these network cards based on the virtual switch port (assuming you use the default settings).
To properly set up the network, you have two options:
1.) VLAN tagging on the physical switch ports (what you have)
In this case, you will need to create a second vSwitch and attach the second NETWORK card to this switch. Then connect virtual machines to the vSwitch and port group that is connected to the switch port VLAN corresponding physics.
2.) VLAN tagging on the virtual port group (this is what I recommend)
Configure the ports on your physical switch as the trunk (or ports 'labelled' If you use Procurve switches), create another port VM on vSwitch0 group and set up VLAN tags on the gropus (VMKernel, VM Network1, VM Network2) port
Take a look at http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf for more information.
André
-
Hi all
I am trying to use the Vibration DONKEY but get the following error:
IsSupported() vibration
TypeError: Error #1009: cannot access a property or method of a null object reference.
Manufacturer of vibration: create a context of extension
at com.adobe.nativeExtensions::Vibration$/initExtension() [/ users/meetshah/Documents/Adobe Flash Builder 4.5/VibrationActionScriptLibrary/src/com/adobe/nativeExtensions/Vibration.as:58]
to com.adobe.nativeExtensions::Vibration$/get isSupported() [/ users/meetshah/Documents/Adobe Flash Builder 4.5/VibrationActionScriptLibrary/src/com/adobe/nativeExtensions/Vibration.as:43]
views::Tour/onMarkerClick() [/ < path to project here > / src/views/Tour.mxml:204]
The code I am using is directly from the example:
var vibe: Vibration;
if (Vibration.isSupported)
{
Vibe = new Vibration();
Vibe.VIBRATE (2000);
}
Not really sure why this could happen. If anyone has any suggestions, it would be much appreciated!
Thank you
Alastair
I thought about it. It seems that the native extension has not been properly packed (check the parameters of the project, Flex Build Path and Extension Native for the iOS and Android).
-
Hey guys,.
I get the following error in the intro of my file...
"TypeError: Error #1009: cannot access a property or method of a null object reference."
to Juke_fla::MainTimeline/PL_LOADING() [Juke_fla. MainTimeline::frame3:11].
This refers to this piece of actionscript code:
This.Stop ();
() this.loaderInfo.addEventListener
ProgressEvent.PROGRESS, PL_LOADING
);
function PL_LOADING(event:ProgressEvent):void {}
var perc:Number = event.bytesLoaded / 3704635 * 100
LPC. Text = int (perc) + "%";
If (event.bytesLoaded > = 3704635) {}
this.gotoAndStop (4);
}
}
If (this.loaderInfo.bytesLoaded > = this.loaderInfo.bytesTotal) {}
this.gotoAndStop (4);
}
more precisely the line lpc.text = int (perc) + % ';It works again... and unless you have the debug player you do not see the error, but its very annoying.does anyone have ideas why this is or how to fix?DanOooohhh! Now, I had the problem!
The problem is that, inside the function, if you have a clause, that when the SWF file loads a number of bytes, send you it to the frame four. The problem occurs because even send you to the glory of four, he is always listening to the PROGRESS_EVENT, when this event is dispatched, the method is called again, trying to put the label of the textfield object that does not exist anymore.
To fix this, simply add a removeListener before send it to the framework 4.
function PL_LOADING(event:ProgressEvent):void { ... if (event.bytesLoaded>=3704635) { this.loaderInfo.removeEventListener( ProgressEvent.PROGRESS, PL_LOADING ); this.gotoAndStop(4); } } if (this.loaderInfo.bytesLoaded >= this.loaderInfo.bytesTotal) { this.loaderInfo.removeEventListener( ProgressEvent.PROGRESS, PL_LOADING ); this.gotoAndStop(4); }
This will fix the problem.
Kind regards
CaioToOn!
-
How can I get rid of this problem? I can't do anything with any Adobe.
Hello dredloxx bl0nd,.
If you feel able to make a registry change yourself, the following article has an automatic FIXIT who will fix the problem without having to manually change.
Article ID: 2258121 -code error '0 x 80070646', '646', or '1606' when you try to install the Office updatesI hope this helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Error cannot access Internet wireless in Windows Vista
Original title: im trying to connect to my internet at home, but he says there is no internet access how to fix
I try to connect my internet home for my laptop, cordless, but when its connected he said thar is without internet access how to fix?
Hello
1. What is the exact error message you get?
2. you use a wireless connection to connect to the internet?
3 when was the last time it was working fine?
4. do you have security software installed on the computer?
5 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman.
Windows wireless and wired network connection problems
If the steps do not help then I suggest you to go to method 2.
Method 2:
I suggest you to go through the steps mentioned in the link and the Coachman.
You cannot connect to a wireless network on a Windows Vista-based computer
http://support.Microsoft.com/kb/935222
Hope this helps and keep us informed if you need help.
Maybe you are looking for
-
Images and site glitches are mixed and distorted. Why?
Images spazzes and there are a lot of images being mixed up I click on one tab to another.For example. When I'm on youtube, then I click on another tab, say Facebook, facebook will change the tab, but the video player from youtube will be beautiful i
-
Compaq Presario SR5019UK drivers audio xp
I have a Compaq Presario SR5019UK with vista. Vista gave me a lot of problems so I decided to put xp on the computer and get rid ov vista. the probem is that drivers card his disaperd so I'm looking for drivers that work with xp? anywone hellp can.
-
End of 2015 21.5 "iMac16, 2 hard drive can be upgraded to SSD?
I have reports that the iMac 16.2 (end 2015, 21.5 ", Core i5 2.8 GHz) is purchased with a normal hard drive and not a disc Fusion that it lacks the necessary connector for a basic SSD PCle. If anyone can check this? Is it possible to upgrade the orig
-
Brightness & yelow filter problems
Hello! My problem is that I can not increase the brightness in the games.I use the nwidia Control Panel to increase the brightness, my office is almost white, but nothing happens in the games...Everything was OK under XP (so I change the brightness o
-
How do i update my computer if he returns constantly with this economics of site there is a problem it is an ode to mistake we continue to last nite 0x8024400a I use it please anyone advise. If I go to the new UPDATE ON THE PAGE qY I AGREEMENT of AG