P1102w: slow down or will not be printed
Most of the time the right printer is unresponsive. If I have the document a break and then start it again, it will usually respond on the 2nd or the 3rd test.
Hey @Vernon8850,
Welcome to the Forums of HP Support!
I see that your Laserjet P1102w printer isn't always the impression of your Mac OS x 10.10 machine. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it's done:
If the printer is connected wireless to your Mac
Turn the printer off.
While the printer is turned off, disconnect the power cable from the back of the router for a minute.
When the lights come back on the router, turn on the printer.
If the printer is connected via USB cable to your Mac
Unplug the USB cable.
Now, let's do the following:
- Click on your Apple icon, system preferences and printers and Scanners.
- Hold down the CTRL key and click the icon of your printer on the left side.
- Click on reset printing system.
- Open Applications, utility and disk utility.
- Click on Macintosh HD on the left
- Click on verify disk permissions. This should take about 10 minutes.
- Click on repair disk permissions. This should take about 10 minutes.
- Restart your Mac.
If you have earlier removed the USB cable, connect. Otherwise:
- Click on your Apple icon, system preferences and printers and Scanners.
- Click on the button "+" in the lower left corner.
- Select your printer from the list.
- Click in the box next to and select your printer.
- Click on Add.
At this point, you should be able to print every time. Please let me know what happens when you follow the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. You should find two icons below this post.
Tags: HP Printers
Similar Questions
-
Just upgraded my MacBook OS to El Capitan, 10.11.3 iOS 2009. Now my Canon MF4350's (USB connection) will not be printed. When I try to print, it says 'Printing' and turns then to ' break. "It scans fine, using the MF Toolbox. I have tried rebooting, disconnect and reconnect the printer, turn on and turn off and I have uninstalled and reinstalled the drivers, etc. An other all-in-one (brother), I have at home will work as before my upgrade. My other apps seem to work normally, Suggestions?
Adding the printer screen says UFRII LT.
-
HP Pavilion: spooler will not delete print jobs
Printer spooler will not delete print jobs. The status is: Error - sent to the printer. Canon has tried to help by using several methods to remove print jobs in the spooler. None of them worked. What I can do next. Thank you
Hello
Please click HERE to access the procedure which should solve the problem.
-
HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?
The steps in this troubleshooting page can help solve the problem.
-
computer printing problem saying "Error exporting" and printer saying just 1 copy. I tried troubleshooting on mine, doesn't have the verified maintenance on the printer, but still saying error. Help, please!
Hi @kelley22,
Welcome to the HP Forums!
I see that your HP PSC 2100 printer is stuck on copy and will not be printed on Windows 8. I'm happy to help you!
The first step, I would like to recommend is a hard reset. Please see this message, How to perform a hard reset, by @Rich1. It is very important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. See this article, questions when it is connected to an uninterruptible power supply/Strip/surge protector power, for more information. This is true for printers and ink jet.
Once this step is finished, please try to print a self-test report, to check the printer hardware is fully functional.
To print a self-test report, follow these steps:
- On the product control panel, press Setup.
The installation menu appears. - Press the right arrow ( ) until print report displays and then press OK. The menu print report appears.
- Press the right arrow ( ) until the self-assessment report and press OK. The self-test report prints.
If the test report print, then on the computer, please try our HP print and Scan Doctorand let me know what happens!
Hope this helps and have a great day!
"Please click the Thumbs up icon below to thank me for having responded."
- On the product control panel, press Setup.
-
Windows email will not be printed and give this message "email error unexpected call to the method"
Windows email will not be printed and give this message "email error unexpected call to the method"
is there a solution for this?
Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method. Check my IE and it's IE8.
Problem solved!
Thanks for the replies.
Neal -
LaserJet Professional P 1102w printer green light blinking, but will not be printed
I had my P of professional LaserJet 1102w for a little less than a year. I use it very rarely and very slightly (I've probably printed total less than 25 pages). It has always worked well.
But in the last 2 weeks, it stopped printing. The Green led comes on, but it will not be printed.
I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system). The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..). I manually checked it for a paper jam too. I have not seen any problems. I turned off, unplugged, he turned his back. She still does not print. And now the green light blinks, even if I turn it off several hours ago.
Help, please. Thank you.
Update: I realized what it was. My USB cable was very slightly loose. I don't see when I checked manually the printer the first time. But I checked a second time and just pushed him tighter. Problem solved.
-
Original title: mouse bluetooyh
Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestionsHello
read these tutorials on how to set up bluetooth
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device
Here are solutions to some common problems with Bluetooth devices.
You can also try a convenience store for diagnose and fix common problems with equipment and devices running.
f the foregoing does not fix it contact the manufacturer of the device
-
I have a 7410 all-in-one printer. Is power on but it will not be printed.
I have a 7410 all-in-one printer, the power is the printer turns on, but when I push the printer button on the light does not come on and it will not be printed. Is there a reset somewhere button? Any suggestions
This is usually caused by a failure of the wireless LAN card. You can solve this problem, as shown on this page. Unplug the connector on the wireless card will disable wireless and correct the problem. Since you're using USB shouldn't be a problem.
-
I have had this printer for some time - he gave me hours of grief. Island only way we could use it was like a device fully connected by USB.
Yesterday I finally managed to do what it is supposed to be: a wireless printer, so that the family do not come to me to print. Today there tell me that it is offline, disconnected, is found on the network. I am so sick of trying to probe on its depths. I have a suspicion that it's to do with IP addresses or some sort of internal conflict - possibly as a result of a previous effort when installing wireless.
Someone at - he of the clues as to what I can do to sort out this mess? It will not even print me a test page now...
Try here for help.
Printer does not keep the wireless connection.
-
How can I get my HP PSC1510xi printer to connect to my Windows 7 computer? It will not be printed.
As far as I know, the series HP PSC1510 connect only via USB.
What happens when you connect the printer to your computer?
You have installed the software from the CD that came with the printer?
Are all the lights on the printer lit or flashing? Please describe.
You can print a test page by following the instructions on one of the following videos?
-
How can I transfer windows license to another PC if the first broke down and will not start?
My office with detail Win7HP broke down and will not start. I intend to buy another PC and want to use the Win7HP license on it.
If this computer came preinstalled with Windows 8.1 or Windows 10, you may not be able to install Windows 7.
If she can't, then you should be installing that it as you did on the first computer.
-
LaserJet P1505n - "printer off-line" message and will not be printed
I use MAC OS 10.8.4. connected to the printer via the ethernet connection
Have had on and outside messages as the "printer is not connected" and it will not be printed. Sometimes, I can't print a day and may the next day. All connections are correct.
I followed the suggestion online HPs and deleted the name of the printer in system preferences - print and scan. Turned things market according to the guidelines. Supposedly I should be able to add the printer, but it will not be displayed in the list of printers. Cannot reinstall from the disc because there has been updates.
Now am stuck with how to make it work again.
Thanks - I can try your suggestions. The firewall is all that came with my iMac and has never been a problem before and I made no changes to it recently.
Before I try something that will help me get the printer displayed in the selection list so I can add it to my System Prefs?
Is it possible download the drivers from the HP website?
-
Extremely slow start, IE will not load after 4 minutes
Original title: extremely slow start, IE will not load after 4 minutes
I have a disaster like now, I am unable to discover HIM, Fox, Chrome & need help as where to go for advice, thank you
PFM
Hello
Thanks for the quick response.
Have you checked the State of the issue in safe mode?
You can start the computer in safe mode with network and check the status of the issue.
Start your computer in safe mode.
Please update the status of the issue, it will help us to help you more.
-
It seems that the printer is configured in the system ok, but it will not be printed. Documents in the queue in the print spooler, but won't print.
Hi Eric,.
It seems that you need help to solve the problem of the printer's performance. Please respond to the suite, which will help us to help you in the right direction.
- What's wired or wireless printer?
- Do you have an error message?
You can check the link followiing, steps, designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.
Solve printer problems.
You can download the latest driver from the following link.
Canon imageclass d320.
Hope this helps
Maybe you are looking for
-
Storage and Application problems
My software storage are weird, my application used 52GB but my overview of storage shown 290GB. How is it?(IMAGE BELOW)
-
Is this ok to turn off V-sync on your laptop / LCD screen
Is this ok to turn off V-sync on your laptop / LCD screen? I know they have a refresh rate of 60 Hz but it will happen if I turn off the V-Sync? good or bad? I know that nVIDIA recommends turning off V-sync to solve problems of stuttering with their
-
Hello I have a problem with wireless internet after windows 8.1 upgrade I have beed installed a lot of different updates and drivers, but nothing seems to help... Internet cable seems works very well, but there is no wireless button at the left site
-
Settings for the Windows Firewall error
When I try to turn on my firewall, the following error message appears: "due to a problem not identified, Windows cannot display Windows Firewall settings. Does anyone know how to reinstall the firewall?
-
Original title: cannot install applications on windows vista home edition - error writing to file c:\config.sys\77803.rbf, error 7370 I have windows vista home edition. When I try to uninstall some games or other applications that I don't have, I get