P2055dn: order black cartridge

Similar Questions

• Black cartridge HP PSC 950XI all-in-One HP 78XL mark stop error messages.

  Black cartridge HP PSC 950XI All - In - One HP 78XL mark stop error messages "" error: installed incorrect color cartridge ";" "" Install the color cartridge"and"install the color cartridge. I cleaned the contacts on the printer and cartridge and printhead. Cannot make it work.

  I've tried everything and still get error messages that continue to change so I can say that things are get cleaned but this cartridge is just not good. I ordered more than HP 78 and 78XL cartridge. If they show mistakes I'll let you know. Thanks for the suggestions, there was one that I had not tried before so I will certainly remember.

• LaserJet 2420dn: LaserJet 2420dn - install black cartridge

  Hello!

  I replaced the cartridge in a LaserJet 2420dn, and the printer seems to recognize the replacement cartridge, but after a bit, a message is displayed on the control screen, "install black cartridge". At first, I tried to install a used cartridge (not worn), which had been installed in a 2430dtn. Then, I tried a new cartridge with the same result.

  With a quick search, I found the following recommendation for this problem:

  • Remove the left cover and inspect lever of Earth.
  • Reinstall the grounding contact lever hinge on chassis and attach it to the chassis using a cable tie.

  I removed the left cover on the 2420dn and ground contact lever / the Assembly seems to be in order. I also removed the left cover on the 2430dtn in comparison. With the left cover removed, I removed and installed several different cartridges and observed ground contact - he seems to bring a strong connection to one of the installed cartridges.

  If I re - install the cartridge originally installed (has little remaining life), the cartridge is correctly recognized and I can print. All other cartridges I tried to cause the message "install the black print cartridge.

  The 2420dn has available, latest firmware 08_120_4.

  A few questions:

  Any ideas what can cause this and what is a good troubleshooting step or eliminate sources of problem?

  When a cartridge is installed on a printer, the printer stores whatever it is in the memory of the cartridge that can "lock" on the specific printer cartridge? I've never heard of this and I don't really think that's what is going on here (I also tried a new cartridge), but had to ask... :-)

  Thank you!

  davidzuts wrote:

  Have you tried a new OEM toner cartridge... If all else fails and you have the option to keep the printer even when the toner reads as empty, then simply move the chip of the old toner which seems to work correctly in a new toner and see if the new toner works now...

  I tried a cartridge oem HP brand new (Q6511x). I had to break the plastic tab and remove the plastic "Ribbon". I also moved the the cartridge chip non - oem (almost worn) who has always worked, to the oem cartridge. This made no difference - oem new cartridge still does not work. I've already tried several cartridges, including a new non - oem MICR cartridge. Just by Visual inspection non - oem and oem cartridges, I am baffled why one works and the other does not. The cartridges look almost identical structurally. As previously stated, I have observed several installed cartridges with the left cover is removed and the contact of the ground seems to be a solid connection for each cartridge.

  After application of a cable tie fix, I tested the new cartridge oem with its original chip, with success. I used the quantity 3, clamps "Garland". For anyone else similar/identical symptoms, I do no guarantee that it is the best way to implement a fix of cable tie or that this will solve the problems you are having. But I hope that someone finds it useful. See the photos below.

  

  

  

  

  

  

  

  

• Black cartridge C410a does not

  Installed all new cartridges, ran the alignment, clean the nozzles several times, sitting and reinstall the black cartridge. Ink level on the screen of the printer displays full cartridge but the solution (on PC) Center shows no graphic content. Several weeks ago installed new black cartridge that failled. Bad cartridge Assaumed. Current cartridge worked so far. Several months ago I had to install a new printhead when all cartridges did not exist. The installation did fix the problem. Some forums suggest to soak the printhead in the distilled water for no more than 30 minutes... before you do that, is there a less dangerous resolution? Product # CQ521A and S/N {deleted personal information}.  Printer is out of warranty, but would like to help with this problem. Thanks for any help. Harry

  I suggest starting with the steps of troubleshooting in this document.  You already have some of them, I suggest you go through the list in order.  Don't forget to check the vents, as shown in the third stage of six, solution.

  If the above does not resolve the problem, then the message here can help.  Many people have had success with this.

• 7520 of HP PHOTOSMART all-in-one: black cartridge for printer all-in-one PHOTOSMART HP720

  I ordered ink cartridges Combo Pack for the 7520 HP which includes a XL Black and color cartridges. However, I need the black size cartridge regular.  After having removed the black cartridge regular size and noting its product number (CR283W), I went to the HP site.  The Web site search indicates that the product number is invalid.  Then I called the HP support line. They have confirmed that it is not valid and sought-after product number to another number. After 15 minutes, I was directed to the shipping department. The shipping department was very helpful, but could not give me the information I need.  Please, please, please, can someone give me a product for a black size cartridge number regular to adapt to the HP7520?  I have the XL size black cartridge, I need the ordinary black.  Thank you.

  The 'regular size black' is a photo, available in regular or XL capacity cartrdige.  The number of actual product will vary depending on the country in which you stand, but you can find the correct information site about HP SureSupply.

   

• Black cartridge HP 364XL for Photosmart C309g

  I have a Photosmart premium C309g all-in and ordered a new black cartridge numbered HP364XL (code CN684EE). It is the code given by consumables HP but differs from the black cartridge, I already have and gives you a message when printing it is incompatible? There is a clear difference in size?

  How can ensure me that I will order the right cartridge?

  tunaman4u2 wrote:

  I had spare ink put in the printer & even if full, now it prints nothing.

  I want to order HP ink cartridges but want to make sure that my printer is not blocked for the HP ink cartridges work.

  Anyway to clean the old ink? Or I'll be fine with the new HP ink without worrying?

  I released the heads & wiped them down, but still no black ink of the replacement cartridge.

  Hoping that the machine is not broke so I don't waste money on the HP cartridge.

  The quality of spare parts supplies varies greatly.  According to the ink that you had the printhead can be permanantely blocked.  You could try to soak the printhead, as described in this post.

• HP Envy 5530: I replaced the black cartridge in my printer. She refuses to print in black only now.

  I ran all the standard tests. Black printing will produce only on cartridge color if used singularly. Print heads have been cleaned. Printer has updated its auto preset and no analysis of a printed item will be printed nor will be a printed document or the other. All prints have tried so far were in black ink. All worked perfectly until the change of the ink cartridge. Replacement cartridge used was a standard 301 HP black cartridge.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882/document/c03765731/

  Let us know.

• Black cartridge does not print.

  Model HP6510.  Black cartridge will not print computer or copy.    A new cartridge has been installed, but it prints just blank or a very light blue.  Yes, it is installed correctly.  The other three colors work very well.  Any help?

  Hello westielover,

  Welcome to the Forums of HP Support! I see that you recently replaced the black cartridge and you get blank pages or a very pale blue text. To better help you can you please let me know the Exact modelof HP printer that you are using?

  Please start here: printer does not print black ink or color of ink or prints blank Pages

  Let me know the results if you always work in printing questions reply back.

  Thank you

• HP Deskjet D2460: Printer SOMETIMES prints wrong colors. New black cartridge prints SOMETIMES?

  The transition to Windows 10, I had problems with the printed colors.  Recently, I installed 2 new black cartridges and with each had the problem that it does not correctly print black.

  I did a test clean cartridge HP page and it was perfect. Next an Excel sheet printing showed only a few black and the other showed no black at all. (Note that the blue parts are out more purple than blue).

  Any help gratefully received.

  The test is probably print a black event, mixing colors to print a black like appearance. I left I have the link below for more in-depth information.

  Using ink in inkjet printers.

  I always suggest dialing the telephone support to see what can be offered in your case.

  Best wishes

• HP 56 black cartridge 3/4 full, will not print

  I just finished several rounds of print head cleaning on a HP 56 black cartridge, which, when I installed it, wouldn't print. It still does not work. When I go to the Toolbox of the HP Officejet 5500 series and click the estimated ink level, it indicates that the tank is at least 3/4 full. This cartridge was first opened earlier when I found the previous ink cartridge (having been informed by the printer the ink level is low). It turns out that there is still ink in the old cartridge, however, if I put the spare back cartridge in its original packing, after removing the orange tape and put the cartridge and packaging in a plastic bag. Is it possible to get this cartridge goes again?

  The printhead has dried up due to being exposed to the air with the Ribbon removed.  You might be able to recover by running up to three cycles of cleaning of the Toolbox.  If it does not then try to belittle the cartrdige nozzles in about 1 "of very hot water for 10 minutes.  Then, remove the cartrdige and wipe the contacts with a damp cloth cartrdige.  Gently pat dry the printhead on a damp cloth.  If you get a black streak and replace the cartridge in the printer and try again with the cleaning routine.

• Firefox 3.6.10 allow me to choose a black cartridge only printing one my HP Officejet 6500 (not wireless).

  Selector only black cartridge is not active.

  The problem is your printer:

  Also, I have the OfficeJet 6500 and had the same problem. Black text was printing with a mixture of colored inks rather than black ink, resulting a gray, fuzzy text. I finally found a solution. In each application under Page Setup, there is an option called "Format for". Mine was created for "any printer". I changed that to "Officejet 6500 E709n [830E4A]" and now it prints black very well. I have a Mac running 10.4.11. I hope this helps.

• E-all-in-one printer, HP Deskjet 3520: HP Deskjet 3520 printer with black cartridge 364

  I tried to insert a 364 black cartridge in the printer. The 364XL black fits perfectly, but the 364 ordinary cartridge seems to be too narrow to fit.

  Am I stupid? Is there a technique for the Assembly of the 364 cartridge?

  Help please.

  The regular black cartridge must be installed in the center of the space, with an equal distance on each side.

  

  Additionally, make sure that you use the black cartridge 364 (with the symbol of the Pentagon) rather than the Photo-364 (with the butterfly or butterfly knot symbol).  The photos below show the 564 cartridge, but is the same for the 364.

  364 black cartridge has a Pentagon on the cartridge but a circle on the box...  The Photo cartridge has a butterfly on the cartridge and a camera on the box node.

  Figure: Ink cartridge Photo with the camera logo

• New black cartridge do not align

  I have a HP laptop and my printer is a HP EnVY 4500 e-all-in-one-series.

  I installed a new black cartridge Ref. HP61. The printer will scan, but the alignment fails. This is a new printer. I had an old HP printer that does the same thing. That's why I bought thinking it was the HP ENVY printer.

  Thus, the new cartridge, new printer, same problem, will not align the scanned map.

  All answers >

  Hi @671,

  Welcome to the Forums of HP Support!

  I see that your new HP Envy 4500 printer is stuck on the alignment process. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrated you must try to get the printer working, I will help the best I can.

  What looks like the alignment sheet?

  Missing colors?

  I would like to do a hard reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
  • Remove and reinsert the ink cartridges.
  • Load white letters unused, plain or paper of A4 format with a brightness level of at least 85 on the set.

  If the problem persists, I would try the steps in this guide, an "alignment failed" Error Message is displayed on the control panel.

• Printers HP 7525: printer 7525 HP black cartridge for first location

  I can't find a 'black' for the side cartridge far left slot (not the picture) to my printer without having to buy color cartridges too which I don't need.  HP 564 packaging said it fits the 7525 but it DOES NOT fit in the first place... it's TOO BIG. I bought one for $15, so I know not it does not fit and I've fulfilled my original with refill from Costco for $ 7 and that does not work either!   It shows that the cartridge is empty and he is not.  It's $40 to buy all color cartridges, which includes the small fitting cartridge.  All solutions other than the pit printer and buy a new one and not a HP one?  Someone managed to find the smallest 564 black cartridge that fits the HP 7525?

  The cartridge on the left side, the same size as the cartrdiges color, is the Photo, not the black cartridge cartridge.  You can buy it in the store or HP or others online.   The black cartridge is physically larger than the color or Photo cartridges.

  564 black cartridge has a Pentagon on the cartridge but a circle on the box...  The Photo cartridge has a butterfly on the cartridge and a camera on the box node.

  document here can help.   It is available in standard or Size XL.

  BTW, if a cartridge is filled he will continue to show as empty, unless the chip on the cartrdige is replaced or reprogrammed.  I suggest to take back to Costco for a refund, they did half the work.

  Figure: Ink cartridge Photo with the camera logo

• OfficeJet 4630: 4630 can print grayscale using only the black cartridge?

  I have purchased a printer 4630 and want to use it like I did my old PSC1350 - using only the black cartridge for all printing. I can't find any setting of grey for the 4630 that will allow for this. With the 1350, the grayscale setting would prevent any color ink cartridges is used, an unnecessary expense for printing in black on white paper.

  If there is no setting on the 4630 grey scale, can I be sure that black ink is used only for printing without color?

  Hello @clif9710!
  
  Thanks for posting on the HP Forums!

  Your printer Officejet 4630 should be able to print in gray scale and the options should be in the window of the printer printing preferences.  I was able to locate a document regarding the changing settings in windows 7 print.

  If you do not get the options to print in gray scale you will need to uninstall the HP software, including the old software, restart the computer and re-install the HP Officejet 4630 software again.

  To uninstall the software HP click here: uninstall the HP software

  To download the HP software, click here: driver and software Officejet 4630

  Another good thing about the Officejet 4630 is that it allows to print mode single cartridge.  cartridges for your printer built in print heads which means that it requires no 2 print cartridges.  If you never use the Tricolor cartridge or you are planning on printing in black, you can remove the Tricolor cartridge, put the cap of the cartridge down and close the lid.  The printer should now say "mode single cartridge printing.  Once the printer is closed upwards, you can send your print job and it will print using only the black cartridge one!

  Thanks again for posting on the forums of HP and post back and let me know how it goes!