p6677c: need help to connect 7525 Photosmart wireless desktop

Similar Questions

• OfficeJet 6500, need help to connect to it wirelessly!

  Help! I somehow found like the guy from the 'IT' to my business even though I'm not really a computer guy, I'm just a guy. We have an Office Jet 6500 e709n, and I need two laptops to be able to print to it wireless.

  I have read both of these threads that cover the same subject,

  http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&thread.ID=3366

  http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&thread.ID=3064

  but this still does not work for me. Both the printer and the laptop are connected to the same wireless router. When I try to print, I just get no response from the printer at all and just the document in the queue.

  Another obstacle is that when you run the install disc, I get a message saying "the specified service does not exist as an installed service."

  Oh, I should maybe mention that the printer works fine when the USB is connected.

  Sequip,

  My problem was solved just in the other forum.  It had to do with the netdevicemanager is not loaded on my system.  Check out the following thread and see if that solves your problem.

  http://h30434.www3.HP.com/PSG/board/message?board.ID=install&message.ID=7688&jump=true

• need help with connection IntelPROset utility / wireless

  Hi all

  I have an Intel wireless card and the driver install this utility (Precision M4400 under XP Pro SP3). When I try to connect to a network secure, instead of asking for a WEP key it wonder about ownership of the device and indicates that I should be able to find this number on the device. In this field, that I can type only in number, therefore impossible to enter a normal alphanumeric key.

  How can I ask him just the correct password, just like the utility of Windows? I read through the instructions and I have not found the answer. There may be a setting somewhere buried?

  AAMT,

  Toby

  One of my employees has reported the same issue.   I never encountered this problem before, but it's been long that I used this utility.  I used workaround is to create a profile for the network wireless using the Intel PROset/Wireless configuration utility.   Double-click the Intel Wireless Radio icon in the bottom right of the screen.  Click the Add button to create a new profile. Enter a unique profile for the connecton and then the SSID name.  Choose "Network (Infrastructure)" choose the type of security (personal or business), then the security settings (is it for my connection WPA-Personal (AES-CCMP).)  Click on OK and then close the profiles window.  You should be able to connect automatically to the profile.  I hope that helps!

• Need help to connect to the wireless headset

  Hi you guys, I have a 610xt Touchsmart, I just bought wireless beats headphones, I plugged the headset to my PC via bluetooth, so far when I played a song from my PC I can hear the sound is coming from my PC not my wireless headset, can someone help me how to do when I play the songs I hear from my helmet

  Thank you

  Teddy, you should go to control panel / sounds and check to make sure that the audio device is set as default.  It should be the bluetooth headset.

  If your problem is solved, please click "accept as a Solution.

• I need help to connect my iPhone apps on El Captian Office

  I need help to connect my iPhone apps on El Captian Office

  Without knowing exactly what you're trying to do, this article from Apple can help:

  Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help on the issue with wireless connectivity on Win7 - dynamic key exchange did not within configured time

  Hello

  I get below error when you try to connect to the wireless router. It was working fine until a few days back.

  InterfaceGuid {1F8AA774-8AE0-48BA-87EB-5522A6070F3E}
  InterfaceDescription Dell 1540 802.11a/g/n (2.4 GHz/5 GHz) Wireless
  ConnectionMode automatic connection with a profile
  BSSType infrastructure
  Key exchange dynamic FailureReason failed within configured time
  Used 294917
  ConnectionId 0x9

  What is the reason code 294917?

  Any help to solve the problem would be useful.

  Kind regards

  Srinivasa

  Hi Richard,

  Thanks for the quick response.

  I tried diff incl. power options. Nothing has worked.

  Finally, I reset my router unit today and it works now.

  Hope that this issue would not yet :-)

  Kind regards

  Srinivasa

• New on routers... Need help pls connect with Primus d-link

  Hi all, I'm new here. I am a complete newbie to routers. I just got a Linksys WRT54GL. I managed to plug it in and it works but lost my phone service Primus IE D-link (KVD-1120).  I had going from modem to the Linksys router this router for the d-link has however led to d-link and phone does not work.

  I called Primus and after waiting on my phone cell phone $20 and 1 hour and 20 minutes later, they were no help other then to tell me that the modem must be connected directly to the D-Link and that somehow, I had to find a way to connect the Linksys router for the D-Link (only 1 WAN and 1 Ethernet port on the back (a).

  Someone along the way also told me that I had to reconfigure certain ports or open some more. I don't know how or what is the same.

  If someone is able to help, I would appreciate it so. Please guide me through it, I don't know how to find the ip address is if I need to do. (read that somewhere)

  Thanks in advance for your help and your patience

  If your Modem is already connected to the D-Link router and your phone is also connected to the D-Link router, because your D-Link router has only 1 WAN and 1 LAN Port, then you can connect the ethernet cable between the LAN Port of the D-Link router to the Internet Port on the Linksys router and configure all the settings on your Linksys router.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...

  Change the mode of WPA wireless security, encryption, select TKIP. Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and do not forget the key.

  NOTE: The password must be more than 8 characters...

  Once you are done with the settings on your Linksys router, unplug the power to the router Linksys, D-Link router and your modem... Wait 30 seconds and turn on the power to the Modem first, wait until all lights are the lid, then connect the power supply to the router D-Link and after 30 sec connect the power supply to the Linksys router.

  Now, check if you are able to go online from the Linksys router.

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• I need help to connect my used ipod touch. The previous owner did not mention that I needed their icloud account to set up my account icloud to the ipod touch.

  I need help to replace a previous owners icloud/apple id. So I can replace with my apple/icloud id, we use it and I was ignorant, I needed previous owners apple id replace it with mine. The previous owner just told me how to reset or to put in recovery mode, but the previous owners apple id needs to turn off find my iphone settings. If I can replace with mine. The difficulty. Help, please!

  You run into the lock of Activation

  Find my iPhone Activation Lock

  If you can't have the previous owner to do

  Turn off find my iPhone Activation Lock

  then back for a refund since yo cannot use the device. Apple isn't going to help.

  If yo cannot come back, turn the unit into the police because it is likely, lost or stolen

• Need to file "dpgmkb.dll" for Wireless Desktop 2000

  Original title: dpgmkb.dll

  I need this file for my 'Wireless Desktop 2000'. Any help would be appreciated.

  Hi Jim,.

  I'll be happy to help if you could provide more information about your application.

  (1) what is the brand and model of the computer?

  (2) what version of the Windows operating system you have installed on your computer?

  (3) what is the complete error message you receive?

  (4) when, exactly, you get this error message?

  Try Performing a System File Checker analysis and check if it helps.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

  If the problem persists, please provide the necessary information to help you.

• Wireless Laser Mouse 6000 v2.0 does not connect to the Wireless Desktop 3 receiver. 0a

  Hello

  I'm having a problem, try to use a Wireless Laser Mouse 6000 v2.0 with a wireless desktop receiver 3. 0a. My previous mouse, wireless laser Mouse 5000 connects fine but the left click button is inadmissible about half the time so I bought the Wireless Laser Mouse 6000 v2.0 to replace. Laser mouse 6000 v2.0 works fine on my laptop with the usb receiver that comes with it, but I would like to use this mouse if you use my office receiving office 3. 0a that connects my microsoft comfort keyboard 1027 and all other previous microsoft mouse that I have owned. I downloaded and installed the latest drivers point software and smart and still it does not detect or connect the mouse 6000 v2.0.

  I tried to use the usb receiver supplied with this mouse on my desk but he won't my keyboard (comfort 1027), but the mouse works fine when using the usb receiver. Any suggestions to get this mouse works with my receiver older are greatly appreciated! Thank you

  Hi Mburton8899,

  It must have the same version of the receiver in order to work properly. Unless the mouse is bluetooth, it can only pair with the USB dongle, with which he came.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help with a problem of Wireless Desktop 800, thank you.

  I have a desktop wireless 800, recently, the keyboard is showing strange behavior as follows;
  1. the left arrow button weighs almost all the time, especially when you try to select text (for example, in word) using Ctrl + Shift + arrow to the left.
  2. the green control led lights when the keyboard is touched against the work surface or slightly harder than usual key and the keyboard stops responding for a few seconds until the light turns off.

  Seriously, I would not have taken the trouble you with this kind of a questions unless it is very annoying because all my work is related to Microsoft word and excel, and I really wanted the entire web for a sufficient answer, but in vain. Hope you can help me. Your time and efforts are deeply appreciated, thank you in advance for your help.

  Dr. Ahmed

  Hello

  To help you better, please answer these questions.

  1. have you tried to use the keyboard on the other computer?

  2 did you do changes on the computer before the show?

  Based on the description of your problem, it seems that the problem is related to hardware. Since you mentioned that you have recently purchased Microsoft Wireless Desktop 800, I suggest you to contact the Microsoft Hardware support for assistance.

  http://www.Microsoft.com/hardware/en-in/support

  However, you can read these articles Microsoft and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• HP PhotoSmart C4780: need help to connect to new router

  I have a HP Photosmart C4780 all-in-one. All the SW downloaded from HP. worked before but I just have to move on to a new Netgear wireless router. Read the previous replies to forum, but nothing seems to work:

  1. print the HP Network Configuration Page, but the URL says: http://0.0.0.0

  2 tried the WPS button on the printer and the router option, but it times out every time, never connect.

  3 tried the PIN option, but ends with the same result.

  4. I don't have the USB cable anymore, otherwise I would simply use it to connect momentarily.

  5. sometimes there is no time-out, and the printer displays the mention 'WPS error'

  I have Win 7 OS. How the hell can I connect?

  According to the document below the link, one of the conditions to connect the printer to the wireless network is a USB cable. I'm sorry, but it seems that you need to get a to put in place with.

  Installation of the printer software for a network connection Wireless (via an Access Point)