PA716A & 500-336 map series: series PA716A with 19 Win & HP 500-336

Similar Questions

• T420s + Mini Dock Plus Series 3 with USB 3.0 90W - USB 3.0 works as USB 2.0

  Greetings!

  I'm probably not the first person who cares, but I did not find the same topic in the forum.

  I have T420s Lenovo ThinkPad Mini Dock Plus Series 3 with USB 3.0 plugged 90W. The problem, I USB 3.0 port on the dock (blue) work in USB 2.0. The port of the laptop works very well. I check it by plugging Seagate drive HARD mobile - when the HARD drive is plugged into the port blue station dock Windows (7, 64-bit) complains "device can run faster", using the port laptop does not trigger the message.

  USB 3.0 is installed.

  BIOS version is 1.37.

  Drivers Intel Chipset are updated.

  Device Manager displays the connection as a chain of two "Generic USB Hub, if the HARD drive is connected to the laptop port its chain of" Renesas Electronics USB 3.0 blah - blah ".»

  Help, please! If this combination is not supported, please point to the corresponding link.

  Thank you!

  USB 3.0 port on the dock is not supported on the T420s, it is supported only on T430s and later versions.

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=ACCS-Guide

  It allows to find the document listed in the link.

  I have the T420s and T430s with this docking station.

• X 220 and Mini Series 3 with USB 3.0

  Hello

  I am recently received a Mini Series 3 with USB 3.0 for my laptop company ThinkPad X 220 Windows 7 64 bit.

  However, after installation of the USB 3.0 driver downloaded from the Lenovo Web site, I still do not see USB 3.0 in my Device Manager device.

  I have also some test using an USB3.0 external HDD but the USB 3.0 port seems to have exactly the same speed as all the other ports.

  How can I activate USB3.0 on this Docking Station?

  Thank you

  Jeremy

  ThinkPad X 220 with i7 (i3 and i5 has usb 2.0 ports only) has a single USB 3.0 port, but the way it is connected through the motherboard, it is unable to support port additional usb 3.0 from the dock.

• Please do you intend to produce T series laptop with 15.6 display based on Sandy Bridge?

  Please tell me you intend to produce T series laptop with screen 15.6 inches based on Sandy Bridge processors? Please write soon. I await your response. Thanks in advance, you

  If you scroll down a little ways on www.Thinkpads.com, they say that the T420/T520 will be introduced in February.

• I'm trying to generate an arithmetic and geometric series/sequence with JavaScript.

  I try to generate an average arithmetic and geometric
  series/sequence with JavaScript. The thing that makes this challenge is that
  I use user input to determine the parts of the formula that I use for
  generate each sequence. I tried running the formulas, but I learned that I was
  channels running through them and not numbers. How to generate my
  sequences/series and always use user input? PS, here's my formulas: (a1-East
  first term, d and r are difference/ratio, and n is the n-th term)
  

  1.) a1 + d * n  

  2.)a1 * r^n

  Entry user of a form is always a string. There are several ways to convert a string to a number in JavaScript:

  • Pass it as an argument to Number()
  • Pass it as an argument to parseInt() (for an integer)
  • Pass it as an argument to parseFloat() (for a floating-point number)

• Error of WCS - Position of the map is in conflict with parents

  Hello all-

  I have a large scale of drawing of a floor of a building plan.  I added to my campus and started adding some APs.  When I saw the prediciton model, I realized that I had forgotten to properly at the scale of the drawing.  When I try to scale, I get an error message stating:

  «Error: the given width, height or the position of the map is in conflict with (building or Campus) parent 846.2 of width and length 655,3.» Please increase the size of the parent (building or Campus) through the edit page and/or ensure that the card is well positioned in parent via the edit card page. »

  I don't really know how to fix this.  I increased the size of the building to match the 846.2/655.3, but then the area showing the building is HUGE on my map of campus (Google Earth photo) and I still get the error.

  Kind regards
  Scott

  Step 1.  Go to monitor > maps > building Click > click the menu drop down and change the building > write the dimensions of the building.

  Step 2.  Go to monitor > maps > floor choose > click the menu drop down and change the floor surface.

  Make sure that the horizontal/vertical span is the same or smaller than what you got in step 1.

  The error comes from the word being larger than the building.  As a best practice, I tend to move all the cards to 0,0.

  Let me know if it helps.

• Help! How am I suppose to add a "map link" an image with this new dreamweaver

  Help! How am I suppose to add a "map link" an image with this new dreamweaver?

  First, click on the small arrow next to the direct button on the toolbar and choose Design menu drop-down

  Once you are in design mode, click a picture in your page

  The Image Map tools will appear in the Properties window (press F8 or window > properties if it is not open)

• HP P6540f - BIOS doesn't support AHCI for newly installed SSD with OS Win 7

  I cloned the drive hard 1 TB of origin provided with OS win 7 x 64 in a blusher SSD Samsung 500 b Bank and replaced the HDD with SSD.  The BIOS does not accept the AHCI mode for this drive and it only accepts the RAID.  Only SATA1 is acrive on this SSD hard drive and therefore does not improve the performance.  Can anyone help?

  I am a novice...

  @Big_Dave

  Thanks Dave. Sometimes you just can't find a BIOS Simulator right when you need it.

  @ahmedsr

  As seen in the image of the BIOS Big_Dave kindly provided, switch from IDE to AHCI and save changes by pressing F10.

  

• "VS 2012 is incompatible with this (win 7 Enterprise SP 1 64-bit) version of windows"

  Not sure of the right section.

  New installation of VS2012 on the new HP Z420 with Intel Xeon processor 64-bit E5.  On the first (and more) open vs, gives Program Compatibility Assistant ' VS 2012 is incompatible with with this (win 7 Enterprise SP 1 64-bit) version of windows.  Check online for solutions can not find anything.

  "Run program" seems to work fine.

  MS .NET Framework 4.5

  Hello

  Your question is addressed in these forums of consumers.

  Please post this question in the following forums.

  Visual Studio category: Forums

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Concerning

• Photoshop CS4 on PC with Microsoft Win 7?

  Can I install the old license of Photoshop CS4 on PC with Microsoft Win 7 or Win 10? I want to buy old software, but I don't know Don t, if it will be possible to use on my PC. I thank very you much for the replies.

  CS4 works on Win 7, but I would be careful to buy an old version of PS, as there are many scams out there, and you're likely to get some software that can not be activated.

• HP Pavilion g series: problem with correction of the graphics card Administration says computer not connected, but it is

  PC questions message says: problem with SMA-Display adapt ATI Rodeon graphics cards.

  Click fix, it can not download the probable cause of the fix is pc is not connected to the internet, but I am.

  How can I fix this I don't know what to download

  HI @sami_3,

  Thank you for your inquiry.

  I understand that you receive a message saying: "there was a problem with the AMD-Display Adapter-ATI Radeon Graphics Cards. When you click on repair that you get a message that you are not connected to the Internet, but you are.

  I'd be happy to look for updates, but would need you know your exact model of the G Series notebook.  How can I find my model number or product number?

  You could try the HP Support Assistant to help acquire the right drivers running.  You could also test the graphic cards by running a hardware test on them. HP Notebook PC - hardware failures (Windows 7, Vista) screening. You will find the option for video under components.

  Please send the results of the troubleshooting.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ""Thumbs up " below!   If you need more assistance let me know and I will gladly do everything I can to help.

• HP Officejet 6000 E609n series 'disorder with detected printer.

  Original title - HP Officejet 6000 E609n series

  Printer does not print.  Connected to the network - ok.  Troubleshooting not detected any specific error but listed "trouble with printer detected" at top of list.  Printer agrees and sends the sheet of paper through but it comes out of the Virgin.  This s the only printer on the network and is set as the default printer.

  Hello

  1 did you changes to the computer before the show?

  2. what operating system you have installed in the computer?

  The instructions will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: R the print spooler service and delete the print queue 

  Start the print spooler service in the Services console

  1. click on Start, clickrun, type services.mscand click OK.

  2. right click on the print spooler service and then clickstop.

  3. right click on the print spooler service and then clickStart.

  Start the spooler service for printing at the command prompt

  1. click on Start, clickrun, type cmdand then click OK.

  2 type the following commands at the command prompt:

  net stop spooler
  net start spooler
  Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

  Method 3: Follow the steps in the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Delete and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Audio input/output ports Thinkpad Mini Dock Plus Series 3 with inactive W520

  I have 3 laptops W520 and 3 Thinkpad Mini Dock Plus Series 3 docks. The audio 1/8 "output audio and MIC ports are not detected by Windows. In the sound settings, the high definition Audio Device is always disconnected. I read that there was a problem with background sound via ports audio on an earlier execution of these docks, but the production on these date are all 11/07 (after Lenovo solved the problem). Someone had a similar problem? The ports are inactive for the W520 by design?

  Solution:... drivers. Should have checked that first. I thought that our support office would have done that. I thought wrong.

• Gateway MD series laptop with Vista once the challenging 'restore point', white screen, will not start, I tried Gateway system and recovery disks, still can not start?

  Gateway MD series laptop Vista OS.

  I tried to install disks system recovery, ordered the bridge.

  The machine do nothing, black screen, no prompt, no way to install the OS, no start upward

  Hello

  did you put the dvd player must be 1st in the boot order

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _______________________________________________________

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://support.gateway.com/us/en/support/default.aspx

• Windows Media Player series compatibility with Easy CD Creator 4

  I need to get the series of Windows player on my desktop that is Compatible with the Easy Cd Creator 4 ME. I think that's probably the WMP 7 for Windows (ME) series. Can someone please provide the procedure to achieve the above objective. For now I have WMP 9 Series on my desk ME and I can't burn CDs of using Easy CD Creator 4.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx

  Above is a list of Discussion groups, many of which have been abandoned.

  You will need to seek advice where Google for your information.

  That's all the advice I can give you.

  See you soon.

  Mick Murphy - Microsoft partner