Palm Centro Hotsync cable

Similar Questions

• Palm m100 hotsync cable

  I have an old m100 palm hotsync cable or original. I have a DELL XPS 420 with Vista 32 bit OS. Usb ports on the computer do not support the old hotsync cable. Where can I find a cable that goes

  be able to connect to my computer?

  Thank you very much for your information if necessary. I havn't used this old PDA in a long time and it is still very useful, because I use it to download the schedules of the airlines. I work for an airline.

  Once again thank you.

  Frank Gibson

  Message relates to: Palm m100

• Unable to HotSync Palm Centro with Desktop

  I had problems with my Windows XP Professional operating system, with SP 2 installed, & had to reinstall.  Before that my operation of HotSync Palm Centro worked perfectly.  After the reinstallation of the operating system & the Palm HotSync software starts but stalls just after that it starts as follows:

  HotSync progress:

  Package installer makes

  Installation

  Install made Service models

  Install to card made

  HotSync Exchange made

  Agenda is

  Agenda (progress stops at this point to no.

  Address Book synchronization all natural)

  Address book

  To do list

  To do list

  Block-memo

  Block-memo

  Addit

  Media

  Note:

  In the progress of HotSync duplicate entries

  The version number of Palm OS Desktop or HotSync Manager is 7.0.2

  The version of the Palm OS software running is 6.2

  My phone is a Palm Centro AT & T.

  I have done a clean uninstall including registry keys deleting & reinstalled software Palm OS 6 times & followed all the needs of technical support for troubleshooting with nothing doesn't.  I also did a soft reset of my phone for several minutes elapse before replacing the battery.

  I'd appreciate any help you could provide in order to solve this problem.

  Thank you

  Phil

  [email protected]

  I found the solution to this problem with another Member of this forum.

  I downloaded the free program DbFixIt of Pimlico Software, Inc., www.pimlicosoftware.com, & was able to install it on my Palm Centro.  I ran the program & it removed 2 problems of the Calendar database.  After that, the HotSync operation took place without problems.

  
  

  Message relates to: Centro (AT & T)

• Restoration of hotsync after Hard Reset Palm Centro

  Hello

  My Palm Centro was freezing randomly and in particular whenever someone called me. As this was very annoying, I performed a Hard Reset of the device. Before I did I did a Hotsync to back up everything (or so I thought).

  Now when I do another hotsync after Hard Reset nothing is restored, the only things on the device that were there before are the photos that were on the memory card. All my Contacts, phone numbers, notes, calendar entries and everything disappeared. How can I restore them?

  EDIT: Ive since found all my contacts, calendar entries, memos, etc. in the application of "Palm Desktop" in Windows XP. How to I move from the computer on the Palm Centro?

  -Aussieguy

  When you hotsync it will ask for a user name, be they existing or invites you to create a new.

  you remember what username you assigned when you do the front hotsync.

  You also said that you can see your information in palm desktop, check the user name in the upper right corner where you see the user name.

  regardless of the user name displayed in the area where you can also see your data, this is the username correct to decide when you hotsync.

  now, your device is empty so kindly do the hard reset on it and then try to hotsync, but this time, you should be able to know what username to choose.

  Message is about: Treo 680 (unlocked GSM)

• Palm Centro will not turn on

  Hello

  I bought a Palm Centro refurbished about 7 months ago. In recent days he refused to turn on at all, so far I have tried pulling the battery for anywhere from 5 minutes to 30 hours and putting again. Same thing every time, the red light comes on, the screen remains blank.

  I have left this phone hoked up to wall charger for more than 12 hours in a row and am quite sure that it is not a battery problem.

  Some information about this phone:

  For a little more than a week before that it would scroll through hotsync indefinitely without any cables that are attached. I would like to pull the battery plug it back and the hotsync cycle jump upwards as soon as he end of initialization, it would then stay in hotsync display 'connect to computer' I would press cancel, after a few mintues it would, then he would cycle all over again.

  He also seems to be corrupted in the diary entry, but appears not hardware related.

  The phone is originally a reman, I purchsed it about 6 months ago and within a few weeks, I noticed that the power button was less than perfect, I ignored a month ago, when she started to I have to pull the battery to end a call the button would not register to hurry.

  I called AT & T and was told that because this AI a reman, they offer only a warranty for 90 days (written near the middle of the team of specialists).

  Any suggestions are appreciated gratefully.

  I doubt simple moisture could cause it to fail--it usually involves the lower part of the phone is dipped in the liquid or a good splash on it.   Users to use hair dryers on low, or ask the phone (with battery removed) under a desklamp which releases gentle heat.

  WyreNut

  
  

  Message relates to: Centro (AT & T)

• Exchange 2007 (SBS 2008) does not have activesync for Palm Centro (Sprint)

  I recently migrated my SBS2003 (Exchange 2003) to SBS2008 (Exchange 2007). ActiveSync worked very well in 2003, but now does not.

  The phone returns this error when you test the parameters: "connected to the server with an incorrect version. Communicate with HER. »

  I am HER and have no answer.

  I'm not (and never was) using SSL and had never installed a certificate on the phone. Everything just port 80.

  Nothing has changed on my firewall except directs traffic to the new internal server IP instead of the old server internal IP address.

  I read several posts here, especially of Imaginos - those who have been of great posts.

  I deleted the account on your phone and recreated.

  Installed the firmware to 1.07 - SPNT on the phone and the hard reset. I have no contacts or e-mail on the phone.

  I deleted the service strategy Regional by default on the server, tested, and implemented the policy of Centro, tested again - and it still does not work.

  I work on this for a few days now and can't seem to make progress.

  Any help would be appreciated. (especially of Imaginos)

  Imaginos helped me get this resolved - I can't thank enough.

  It seems that the solution is the following:
  No matter what options are ticked IIS Microsoft-Server-ActiveSync, a certificate is required by SBS2008 (SBS2003 would using port 80 instead of 443)

  You must create the certs.pdb using the change of certificate palm tool and transfer to your phone using the hotsync cable. (if you want to self certify)

  create a DNS host name (a) on your public DNS for outdoors. to your public IP address. (SBS2003 used mail. default )

  Imaginos figured this out and tested it with his Palm. did I mention I can't thank enough?

  Message relates to: Centro (Sprint)

• Where is the button "Sync" on the Palm Centro desktop cradle?

  Hello.  I just mailed my Palm Centrol Desktop Cradle.

  I can't find the button "sync" in the cradle or cable, however.  How to throw a "synchronize" with my laptop from the cradle?

  Thanks for your help!

  Open the application on your Centro HotSync and press the big button in the Center!

  Awaay we will!

  WyreNut

  Message relates to: Centro (AT & T)

• Windows Vista will not install device driver for Palm Centro

  My PC Windows Vista can't find info from device driver to install my new Palm Centro.  I downloaded the latest version of the Palm software.  Any ideas?  Thank you!

  What version of Vista you have?  32-bit or 64-bit?

  64-bit cannot sync via a cable - only via a wireless (BlueTooth or IR) method.

  Wyrenut

  
  

  Message relates to: Centro (AT & T)

• Updated the Treo 650, Palm Centro, unable to synchronize all the data of the device

  Hello, I bought a new palm centro once my treo 650 took a bath.  I was able to load all my previous data on the new device with no problems, but I've been unable to hotsync since.  If I do a hard reset I can load it all on the property.  The only third party application that I use is datebook5.  I bought the program dbfixit and repaired all the blobs on my calendar entries, but I am still unable to sync anything (even memos, todos, address book, make a pocket computer > computer replacement).  I also deleted my palm desktop user name that I use a new fresh user profile and I still get the same error messages.  I also ran the palmhotsyncsetup.exe of Pimlico software.

  Here is the error message I get:

   HotSync session completed with errors on 16-09-08 11:06:36
  

  •  HotSync session began 16-09-08 11:06:36 and finished in 0.0 seconds
    
  •  Book synchronization Date cancelled
    
    • Duration: 0.0 seconds

    HotSync session completed with errors on 16/09/08 11:09:37
  

  •  HotSync session began 16-09-08 11:09:36 and completed in seconds 1.0
    
  •  Synchronization of AddressBook abandoned
    
    • Duration: 0.0 seconds

  Thank you all in advance for your help!

  Hi jacobkaucher,

  Welcome to the Palm Forums. A quick question for you. Do you use wireless sync to get your email on the phone?

  If you are, then this is your problem. If not, skip the rest of this post. Wireless Sync disables the Palm Desktop software. If you want to get your e-mail and synchronization, I advise to use VersaMail instead. If you really want to use Wireless Sync and still cradle sync, here are steps on how to re-enable the lines: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=37678. This will allow you to start the synchronization again, but beware, you might start to get copies of your data.

  Message relates to: None

• Palm Centro Bluetooth Sync with Vista 64-bit

  I just got a Palm Centro and went throughout the configuration both the Palm Centro and the PC to see each other.  I created a (COM5) virtual COM port and chose this port as my connection series.

  That's when he stops working.  By pressing the button on the Centro HotSync gives me the following error...

  Cannot start the HotSync operation because the port is in use by another application.

  This port has been created, how can it be used?

  Thank you, John

  Well, I found a solution.  After pairing between the phone and the PC and affect the virtual port, you must restart the computer.  Once I rebooted, the port was available and hot sync phone would be.

  Thank you, JOhn

  Message relates to: Palm Z22

• Palm Centro / 64 bit Windows Vista

  Everyone figured out how to sync music to a Palm Centro using Windows Vista 64-bit?  My understanding is that there is not a USB for Vista 64 driver.  I can already my Centro Bluetooth HotSync, which works (although slow) but cannot sync music and like anyone with a Centro knows, it is inconvenient to remove the memory cards.

  Even if there is a way to sync music files to your center of the Vista desktop, music files tend to be large and take a long time to synchronize.  The best way to put music files on your card with any OS is drag & made slide/audio selecting folder on your card with a card reader.  Suppression of the Centro SD micro card isn't all the * who * inconvenient.  Is not like you need to do it very often.

  Message relates to: Centro (AT & T)

• Palm Centro Calendar add events

  My Palm Centro is around the age of 14 months. It does not allow me to add any appointment to the calendar either manually, or sync with my PC. All other features work correctly. I made soft resets. Actually, his own soft reset. Whenever I try to manually enter an event. I type a letter and it automatically goes into reset mode.

  I had three other Palm handheld devices. After about 1 year or more, the calendar feature seems to ruin.

  Bonnie B

  OK, if the Centro worked Ok before sync'ing then it looks like there could be data corruption in the calendar.

  Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

  http://www.pimlicosoftware.com/dbfixit.htm

  To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.

  After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar.
  After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.

• Verizon Palm Centro with data block incoming picture message issue

  My wife & I have Verizon Palm Centro.  We have a data block on the account that we only wanted to fuse our PDA with our phone to carry less devices.  Recently, someone she knew sent him a picture message.  She never received as to be expected since we have a block of data.  BUT now his phone constantly freezes and will not allow her to put it to sleep.  I noticed that when he behaved in this way, there are two icons triangle above the antenna meter chart, which mean the transfer of data (they go gray and then become green and grey).
   
  To try to remedy the situation, I did a soft reset.  One more question.  Did a Hard Reset.  One more question.  She took it to the Verizon store.  They said he had no trouble finding.  Has continued to be a problem.  Then I saw on the Palm site there is an upgrade of the operating system.  Done (which includes some reset hard).  One more question.  The next day, my wife returned to the Verizon store.  This time, they saw the issue.  They said there was nothing they could do, but give him a new phone.  She brings the phone home and same problem.  I then HotSync had to get all its data back on the phone.
   
  Now, I get a little concerned, as it has been 5 days since the beginning of the question.  As this problem happening my wife tells me of the picture message sent him these days ago.  While it's a data connection, I opened the message Centre and there is an icon of mail with arrows to move through it stay at 0%.  When that disappears, the triangle icons disappear from the graph of power antenna.
   
  I call the technical assistance.  The person is very and said we should would never block because someone should only get this phone for data.  I explained that we wanted only to combine devices.  I explained the picture message. blah blah blah.  He then says that it is from a software on the phone.  Takes me through a bunch of read him information.  All the time that he does not believe me that it's something to do with the unrecovered MMS (which we do not want yet).  In any case, it is more than an hour on the phone with the guy.  It had Palm on instant message and at the back of their hand for me.  He then tells me to do a Hard Reset.  I told her that I've already done a lot and it was not the solution.  I had to do because it could it resolve, he said.  I did, and for the next few minutes, it doesn't lock upwards with the icons.  That is why he said it was fixed and it was something we did on the phone.  Then, he wanted to end the call.  As he was not driving, I ended the call.
   
  Well..................  I did a restore complete everything on the phone my wife, starting by a Safe Hotsync for his calendar, list of tasks and addresses.  Then I restored one - by - one all of his requests including its Documents to go files, etc..  It took another hour +.  The phone worked ok for some time and now 1 day later... The same thing is happening again.
   
  Is there a way to stop this madness?  Verizon can't kill what is trying to get out?  Is there something in the Palm that can kill the message?  Any help would be great.

  PS Our phones have the same exact software on them with the same applications, provided with the phone and the modules provided by Verizon/Palm.  We have the same ringtones.  We have the same content of music on our MicroSD cards.  The only thing different is photos we have taken.  My phone doesn't have this problem.  The only difference is that picture stupid someone message.  Hopefully, it's not mine.  Thanks again.

  Thank you very much for the reply.  After that I posted this, I contacted Verizon Technical Support.  It seems that the problem was exactly what I said it was.  There was a picture message which was held by the data block, but still somehow try to get on the phone.  I spent some time with a very competent tech person who took the time to solve the problems with me (and down tell me).  We tried to remove the block to see if the message would come through.  Still problem.  We went through all kinds of things to reprogram and realign the phone to the Verizon network.  Still problem.  Then he looked again and found a setting in the application of message for MMS messages fired automatically.  When I disabled this setting, bam message came (no picture because of the block) and the problem stopped.  I was very pleased with the help and the phone my wife is no problem.

  P.S., while my wife & I have the same contacts this is a manual process to keep the same.  We have different identifiers of Palm.  Our devices are different.  The only reason why I mentioned in my original post how we hae the inforamtion even had to point out that his phone was screwing and mine was not (with essentially the same content).  Once again, thank you.  G

  Message relates to: Centro (Verizon)

• Palm Centro keeps restarting

  I just performed a Hotsync operation and my Palm Centro keeps restarting; I guess due to the installation of the software.  How stop the reboot and restore my Centro to its previous state?

  You will need to start over again with a Hard Reset, then synchronize with your old username after making a few changes to the name of a special folder on your computer.

  On a XP box it to: C:\Program Files\Palm\ your HotSync name account short \Backup.   Name the folder of backup to anything else (for example \Backup_old).

  This will allow all the data back on your phone PIM, but none of the third-party software that may be causing the problem.  HotSync is complete, you can start to reinstall the third-party programs one by one, seeking the return of the problem after each installation.

  If you have a strong idea about a program that caused the problem, do not install it!

  How hard reset a Palm Centro.

  Go to http://kb.palm.com and enter "Solution ID" number 45050.

  In short:
  -hard reset
  -Locate the backup under Palm Desktop folder folder
  -Rename in backup_old
  -synchronization, select old id. This will bring back PIMs (calendar, Contacts, tasks and Memos) but no settings or programs
  -Reinstall the applications one by one AFTER having checked that they are compatible with the device target.

  WyreNut

  Message relates to: Centro (AT & T)

• Palm Centro restore Contacts

  I recently restored my phone due to errors. I saved it on my computer... but I want to transfer my phone to reset the contacts. What files are for contacts because I want to delete everything before I HotSync. I have a Palm Centro from AT & T

  Hello..  Welcome to the forums of Palm.  Your info I understand that you were doing a hard reset of your centro and do not want to sync contacts. Before sync you go to c:\program files\palm (or palmone)------your folder of user name (for palm desktop version 4.x) or c:\my documents\palm os desktop\user name the folder (for ver 6.2) and find the backup folder and rename it to backupold.

  Then, simply shut down the lines that you don't need.  Right click on the hostync icon near the clock and select personalized or settings (depending on the version of palm desktop).  If parameters you want now applications. Here you will find calendar (date book), contacts (address starts), memos and tasks.  Select one at a time, that you don't want to then configure or edit and select do nothing and check position it as default zone.  Once you have disabled that you want to synchronize and you should have what you wanted.