Palm startup Forever

Similar Questions

• HP pavilion 17 Laptop: stuck at the loading screen

  Hello!
  
  So I did have problems with startup forever, but since yesterday my laptop often stuck after the HP logo appeared and the loading circle turned for a few seconds. While it gets stuck, it begins to make more noise and gets hotter than she usually during boot. I did a check of the system in the BIOS bit everything seems fine. Someone at - it knowa the problem or solution?
  
  Thanks in advance,
  
  Giovanni

  I'll do it every time I have to restart the laptop. A couple of times now, my laptop goes down, and whenever it starts again ot said something about the low battery beong. So maybe theres problems with my battery. I know this isn't my charger that I won't get this problem when my battery ' out. Thank you two for responding and so fast too.

• takes forever for my system to start because so many programs open at startup,

  It takes forever for my system to start because he is so many programs open at the beginning, nobody seems to be able to tell me how to disable it only open these programs as needed. I'm working on Windows XP.  Any suggestion will be appreciated.

  Help! My computer is slow!
  http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

  List of troubleshooting for a slow computer
  http://www.bleepingcomputer.com/forums/topic44694.html

  What to do if your computer is running slowly
  http://www.malwareremoval.com/tutorials/runningslowly.php

• Local network connection takes forever to connect at startup

  I have a Dell desktop running Windows 7 Ultimate 64 bit. After Installing Roxio Creator, the (Ethernet) Connection of local area now for always takes during the boot process. Before, you will see the audio icon followed by the load of the network icon in the status bar. The network connection took only a second to connect. After Creator 2010 it takes 10-15 seconds, then displays brand of yellow scream, then finally connects to access internet. Just for the record, I'm using Norton Antivirus 2010 and Windows Firewall.
  Any help would be greatly appreciated!

  Tim

  Hi Tim,.

  It seems its a problem with Roxio, you can try to delete the startup entry and check. If you still have questions, you may have to contact Roxio.

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can perform diagnostic tests to determine what elements of the normal starting procedure are causing problems.

  Clean clean boot.

  1. click on start, type msconfig in the search box and press ENTER.

  The user account control permission.

  If you are prompted for an administrator password or confirmation, type

  password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load starting points.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  All programs that run on your slower startup of the cause of start-up.

  The main cause of slow starts, all startup programs is usually your firewall or antivirus.

  Also look for the updated for your NETWORK card drivers

  Step 1: To get the latest drivers for the computer.

  Click on the link below for more information on the update of drivers.

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

  Thank you and best regards,

  Zaki

  Microsoft technical support.

• Palm treo pro is frozen on startup

  Hey, how's it going?

  I updated my version of Pocket Express on my Treo Pro, settings changed my "today" screen to show the Pocket Express, and my phone has crashed, rebooted and is now frozen.

  I took the battery several times and put it again.  The wallpaper is normal, but none of the stuff today screen rises, keys do not work, the phone does not work.

  What can I do?

  I pushed around on the internet and finally found how to do a "hard reset" on my treo.  search on this website.  It's a bit like re-installing your operating system on your pc.  it erases all your data, but you don't have to replace the phone.

• Launch Firefox on startup with Windows 10

  How can I make Firefox will automatically start up when I turn on my computer? At the moment it takes forever to start and I would like to go there as soon as I turn on the machine. I use Windows 10. Thanks in advance.

  Hi MontgomeryS, like previous versions of windows win10 has an autostart folder in the startmenu, where you can place shortcuts to programs - those who will be launched as soon as you connect to your account.

  Press windows + R and open %appdata%\Microsoft\Windows\Start Menu\Programs\Startup - then open the right file. You can then right-click on the icon of firefox on your desktop, copy it and then paste them into the startup folder.

• Palm Desktop 4.2: Palm Desktop 4.2 on Windows 32-bit 10

  This isn't a question, some information for fanatical Palm users who might be interested.

  Because I have some old software I want to continue to use, I installed the 32-bit version of Windows 10 on my HP Pavilion 1d21dx g6.

  I used to synchronize my Palm Centro on a machine to Vista 32 bit running Palm Desktop 6.2. Because some very useful features (such as the birthday in the calendar reminders) disappeared in this version, after setting up 10 32-bit Windows, I decided to try to use Palm Desktop 4.2, the version supplied with my Centro. I am happy to report that I have installed the software, did a HotSync, and everything went very well [WELL, i thought THAT this was the CASE - SEE below]. Now I have all my stuff on the phone and on the machine Windows 10, complete with birthday in the calendar reminders.

  The only problem that I had was settting place pipes HotSync for some Palm OS with counterparts of office applications, but in any case, I was able to get the pipes installed by the application of counterpart temporarily running in Windows XP compatibility mode. Once the pipes are put in place, it seem to not need to run anything in compatibility, or administrator mode [WRONG - SEE below].

  I have not heard a lot about the 32-bit version of Windows 10, but I like it. I found that it is very fast, and I still have to find an old Windows application that she will not be executed.

  I found a solution that worked for me. I realized that something on my setup of Palm caused my Palm user directory switch between C:\Program Files\Palm\Username and C:\Users\Username\AppData\Local\VirtualStore\Program Files\Palm\Username, leading to duplicate reports, missing documents and the General problems of HotSync. I do not know what exactly triggers the switch every time (I don't think it was just the question of admin rights as I at first suspected), but I think it had to do with some of my Palm to be older than other applications. In other words, some were apparently designed or implemented to date with new versions of Windows in mind, while others were not, and HotSync Manager could not deal with that, because I had everything installed.

  In any case, everything started to work properly after I installed Palm Desktop 4.2 directly in the folder C:\Users\Username\AppData\Local\VirtualStore\Program Files\Palm\

  (Of course, in all the above examples, substitute your own "Username" username.)

  My thought was to avoid the switch between the location of the traditional repertoire of the Palm and the location of the user directory style Vista by installing Palm software directory in the Vista style directory. I have not experienced any important matter. The only minor issue I have is that HotSync Manager does not automatically start despite being listed in the Startup tab in the Manager of tasks. I'm not going to tinker with compatibility modes and privileges trying to HotSync Manager starts when the computer starts. It is easy enough to just run it whenever I have to synchronize.

  You will also need to consider the order in which you install your office-side applications. For example, I found that one of my apps should be executed only once with admin rights so that he could establish his lines. Which seems to trigger a change in the location of the user directory for another application that I use - that does not allow the user to specify an installation directory. I got around this by implementing these apps in the order that I mentioned, while the other user directory would not be changed after creating the first led her.

  Of course, my solution has its limits, but it works for my single-user installation.

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• NB305 10F takes forever to start

  Hi all

  I have a brand new (two days!) NB305 10F Netbook and even it is a very nice piece of kit to mount on a half hour or so to start!

  I didn't do anything to this thing of the hook aopart up to my wireless home network and since then stop after that it simply does not work correctly. I tried to power off and re-boot in safe mode, but it still takes forever!

  What's up (Toshiba help line will get ' phoned later this afternoon!) and how do I back out of the box settings? Can I start and enter the BIOS with F2 or F8 magic or similar to reset everything?

  Any ideas would be most appreciated.

  Thank you.

  On each new Toshiba notebook is preinstalled original Toshiba recovery image. This recovery image contains many tools and utilities as well as additional applications. Most of them start by operating system and slows down the startup time.

  Please note: when you get the new book of Microsoft updates are set to auto so when you start your laptop and there is LAN or WLAN connotation your laptop will start to automatically download the updates and it will slow down the performance of any computer laptop.

  What you need is the optimization of the OS.

• The Palm Desktop icon Disapeeared

  Hello

  Synchronized old palm centro data and with data curent palm centro.

  Now, only Palm Desktop Media show and install icons.

  Make a right-click on the Panel gives only option tailored for media and install.

  My data is all here for calendar, addressbook, Todo and Memo is but it is y not visiable applications Palm Desktip 6.2.2 with 7.02 HotSync manager on Windows 8.1 with 64-bit drivers and bluetooth hotsyc - all this worked well until I sysnced my older desktop with the palm centro which had some information that my current palm centro does not.

  Is there a file that tell applications to start Palm desktop at startup?

  Hello and welcome to the HP support community!

  Try right click on the shortcut for Palm Desktop, and then select "Run as Administrator".   See if the data is displayed.

  WyreNut

• (Pixie palm) Try to update webOS 1.3.5.1 (unpacking...)

  Miss me the CLOCK of my new Pixie of Palm app. Reading that I need to move to the 1.3.5.1 webOS.  I clicked on the 'Upgrade' and says it is downloading... sitting there forever.  I finally gave up and turned the phone off and on again.  Now when I go to 'Upgrade' it says "Unpacking" and never does anything more than that.

  I'm doing something wrong?  I am in desperate need of the CLOCK (wake up) app.  Thought it was a mistake on this phone because I had it on my razor phone stupid before changing for this one.

  OK, exceeded the update problem (guess you must have a full battery to get download and install it.)

  But still no CLOCK app he shows in my list of applications software, but not as an icon on my Launcher.

  Also, not that I'm 1.3.5.1, when I go to the app catalog, I get the large yellow triangle that says: "this action was not successful. Try again later. »... I have internet connectivity, so not sure what is the problem.

• Loading Deskeop Palm on PC running Vista and synchronization with m130.

  No device

  I tried to install Palm Desktop 4.1.4 and 6.2 on my laptop under VISTA without success.  I can't open Destop or sync with my handheld M-130.  I installed palmhotsyncsetup.com Desktop 6.2 both Pimlico.  The Office seems to load OK but it will not synchronize with the m-130, nor it will open.  When I try to open the Palm Desktop on my laptop I get an error: module not found note pad.exe.

  Any idea.

  Tried to reinstall worm 4.1.4 as you suggested and using the procedure you referenced and found a tip for clk rt the PD icon during startup and select "Open as Administrator" and who did the trick.   PD is in place, running and sync with the m-130.  Thank you very much.

• Satellite startup sequence?

  Hello again people

  How can I configure my laptop boot sequence so that it does CD - drive - floppy drive - LAN.

  I want the CD first, but don't want the LAN option before the HARD drive or the floppy drive (it takes forever to start after that).

  Thanks in advance for any help.

  Hey Buddy,
  Do not have your laptop model, but I think that may be the same for you as well... During the initial startup screen, press F12 and settle some desire to order u.
  In turn, goto setup (press F2 during the boot process) and in the Startup tab, change the order (F6 for to the top and F5 for down)... It may be useful

• HP short cell Test at startup - DST hard drive failed

  Laptop HP 2000-453-CA

  Product ID: A7T89UA #ABC

  64-bit Windows 8

  Failure ID: GLWG6K-00075P-MFKT01-60V403

  My computer is 2 years old. Recently, he began to act, its been getting really slow and the temperature of the computer has increased very easily.

  One day, when I turned on my computer, the screen is blank after the windows logo screen when you turn on the computer, and it remained empty forever. The screen was always backlit and occasionally I see the mouse cursor.

  Once the recovery screen appeared when I turned it on, I tried all the options he had (except reset and refresh because he says he needs additional files and insert a recovery disc) and it still does not work.

  Finally, I tried pressing ESC to boot and used the system diagnostics menu. I chose the test start and when he finished he said short hard drive DST: failure and starting Test: failed. Everything happened.

  Please help... What can I do to fix this?

  Thanks in advance!

  Hi GRN123,

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  I hope you made a backup of your personal data and you did the recovery disks.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Thank you

  Visruth

  * CLICK ON "ACCEPT AS SOLUTION" TO HELP OTHERS WITH THE SAME PROBLEM *.

  * KUDOS GIVE IF IT HELPED YOU *.

• Computer is very slow to download programs, especially at the start and when I try to watch a video clip, it takes forever to load.

  Original title: slow and jerky

  My computer is very slow to download programs, especially at the start.  I tried to reduce the programs start, but in vain.  Also when I try to watch a video clip, it takes forever to load, and then when he does, she plays in 2-3 seconds intervals.  Help

  Hi LouisBode,

  1 Windows operating system you are using?

  2 did you a recent software or hardware changes to the system?

  3. What is the brand and model of the computer?

  4. what program you use to play the videos?

  5. this happens with all the videos that you try to play?

  Method 1:

  If you are using Windows 7, you can run the troubleshooter of performance and check if it helps.

  Open the troubleshooter of Performance

  If you use Windows Vista, then try to run the Fixit from the link:

  Difficulty of Windows system performance slow computer problems

  Method 2:

  You can read the article and try the steps to solve the problem:

  How to resolve performance issues during startup in Windows Vista

  Note: This article also applies to Windows 7.

  Method 3:

  You can also refer to the computer or the device manufacturer's Web site and install the latest version of the drivers for graphics cards.

  Updated a hardware driver that is not working properly

  Update drivers: recommended links