Satellite startup sequence?

Similar Questions

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• How to change the boot on Satellite 5100 sequence?

  Hello, I don't seem to be able to change the boot sequence for my 5100 satellite. I tried pressing C, F2, F12 and any other allmost touches possible.

  I also tried pressing ESC to access the bios. When I Press esc, I wonder the password that I created long time ago. When I entered the password all that shows on the screen is "Press F1 to enter normal setup" or something like that, if I have not seen to be able to enter the bios.

  Does anyone know a solution to my problem? I need to change the boot sequence

  Hi Lethin,

  I think your laptop is "Legacy free" which means that you have no way to directly access the BIOS.

  Any updates or changes to your BIOS must be made of in Windows.

  HTH

• How to change the boot on Satellite A10 sequence?

  Satellite A10 system.

  Try changing the boot sequence, tried various combinations
  1 / press "esc" front logo XP Monte - goes on the desktop
  2 / press "esc" and F1 for both at the same time - still going on the desktop

  Can someone let me know how (1) is supposely the instructions on the site Web of Toshiba.

  Please help summer try thw all day to enter the configuration of the Bios, TIA

  To enter the BIOS settings on Satellite A10 press ESC immediately after switching on the laptop. Press the key several times and follow the menu displayed on the screen (lower part of the screen).

  When the Toshiba welcome screen appears, you see the little symbols of bootable devices under this home screen Toshiba? He is old enough laptop model and I really remember how it looks like.

• L50D-B-147 satellite startup problems

  Hi all, I had a L50D-B-147, had again since July and it has been great.
  Lately, although something happened I hope you might be able to help with, it is under warranty then can be sent away to be looked at but I thought I would ask here first in case it is something I can fix it.

  That's the problem - no matter how long the laptop is off, be it overnight or just for 5 minutes, the first time that I turn it on it shows the Toshiba load screen then turns off. I don't get the circle loading or anything else.

  However, when I turn it on again, it loads fine and I get no problems all day.

  BIOS is up to date, as well as all other drivers. I tried to start without power connected, then with power but without battery. Tried without anything plugged into the USB, and I took everything out of Windows startup, but none of that made a difference.
  It does feel not hot and is sitting on a table with a fan under it.

  Is there anything else I can try before I send it away? If it helps, I'm under 64-bit Windows 10 and since the day he arrived. It came with 8.1.

  Thanks in advance.

  Anyone?

• How to change the boot on Satellite 5200 sequence

  Hey, I've got laptop - Satellite 5200 901 and I would like to reinstall OS but I don't know how to operate the cd boot, always laptop run the operating system from the HARD drive.
  I would like to change boot on a CD and I don't know how to change it.
  I tried the keys F1 to F12 and I can't start the configuration of the BIOS.

  Please help me with this.

  Please try pressing the C button at the beginning upward. It will require your laptop to use CD/DVD-ROM as first boot device.

  Are you using the original recovery CD for the installation of the OS?

• SA40-702 satellite: startup messages

  Hello

  Until recently, I experienced no problem with my satellite SA40-702. However, while starting I started getting the following messages, which appear before the Windows XP best wishes...

  PXE - E61
  Media Test Failure - Check the cable of

  PXE - M0F
  Exit Intel Boot Agent

  While no obvious problems occur while using the machine, its obvious that these messages should not be appearing. Someone had no previous experience of these message?

  Any help/advice gratefully received.

  Concerning

  Peter.

  Hi Peter,.

  The PXE - E61 message ususally indicates the laptop tries to start from a LAN attached rather than the hard drive or the CD source.

  First check the boot order in the BIOS (press and hold F12 for the market) and make sure that your boot order has your hard drive as first or second device in the list before the connection to the local network.

  If it is already defined in this way, then it is likely that your hard drive is corrupt because the system can't find the boot sector (or can't read).

  I presume that you can boot from the CD (since you say that you tried to reinstall XP. Did you use the recovery discs for your laptop or a Microsoft XP disk?

  Kind regards

• I hate the secure boot and a permament legacy boot startup sequence.

  I'm a new 700-074 8.1 running office.

  I have a Pavilion old Pentium 7-year-old who was running out of steam with new programs requiring a 64 bit OS and more memory.

  So, I got the urge.

  I like the image of the entire disk to an external drive once a month via a USB connection through a USB 3.0 adapter.

  I like the 2014 Acronis True Image program.

  The program may take a bootable cd, or it can be installed in the computer.

  When run in the computer, the computer must restart once the program installs a startup program.

  After I did it, the computer went to a black screen and wouldn't start. Had to call HP.

  I removed the program and decided to use the bootable cd.

  Don't see the cd because of the secure boot.

  With the help of HP, I was able to go into the legacy boot and download Acronis to run but he warned me that my target reader wouldn't start because it has been formatted to MBR and not GBT.

  So I reformatted the external drive at GBT but it seems to reboot the computer is returned to the secure boot.

  On my flag, I have had trying to start first on the cd drive and then automatically try the first hard drive of the computer.

  I seems that legacy boot can start only once on a single device before returning on secure boot.

  Is there a way to keep the computer in legacy mode and try in order the cd drive then the hard drive?

  When you ACTIVATED 'Legacy Support' is not disable "UEFI". Peripheral boot UEFI still have priority and will start as such. The cloned drive should start just fine, as long as the UEFI / GPT boot structure remained intact on the clone.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Hyperion EPM 11.1.2.1 Services startup sequence (order)

  Please suggest the sequence watch EMP 11.1.2.1 services. I use 'Start EMP' in all programs - EPM - Foundation services system - start EMP. But it's too late to start all services. and service of 'Reporting and analysis' a few times will not start.
  
  1 hyperion Administartion Services - Web Application
  2 hyperion CALC Manager - Web Application
  3 hyperion EPMA Data synchronizer - Web Application
  4. the EPMA Hyperion Server
  5. web layer of Hyperion EPMA - web Application
  6 hyperion Integrator ERP - Web Application
  7 hyperion Financial data quality management - Manager tasks
  8 hyperion would invite management - DME listener
  9 hyperion would invite management - management service
  10 hyperion would invite management - service Web Manager
  11 hyperion would invite Management - web Services
  12 hyperion Financial Reporting - web Application
  13 hyperion Foundation Services - managed server
  14 hyperion Integration Services
  15 hyperion Planning - Web Application
  16 hyperion provider Services - web Application
  17 hyperion statement and framework of analysis of work
  18 hyperion statement and framework of analysis of work - web Application
  19 hyperion RMI Registry
  20 hyperion studio service BPMS bpms1
  21. the Hyperion Analysis - Web Application web
  
  22 oracle process manager (EPM_epmsystem1)
  23 oracle Process Manager (ohsInstance3250625901)
  24 OracleOraDb11g_home2TNListener
  25 OracleServiceORCL
  
  Friends, I ask that you guys please suggest the sequence to look up services. You can type nubers
  EXP: 25,24,23,22, 13... etc.

  Reference: Page 284 of http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf

  HTH-
  Jasmine.

• Satellite startup problems C50

  Hi all need a little advice on my laptop.

  It was working fine a few months ago, without any problem, it has been stored in a safe place, so he was not hit, hit or fell.

  However, I tried to use it last night, but he shows no sign of life... I plug power adapter and battery lights up as it should, press the power button and it flashes lifeless in the system at all.

  A flash every 6 seconds

  Ive tried all the methods reset, removed the battery cmos, memory and the HARD drive and re - them seated firmly but still nothing
  What I noticed when I remove the memory chip and hit the power station remaining lit and the hard disk turns but nothing on the screen at all

  Any help would be appreciated

  83 views! someone must have had a similar problem or knows how to solve this problem.

  Toshiba tech guys not getting involved in this forum?

  The laptop is not that old and now I can't even turn on this bitch to use.

  Any ideas at all you'd be grateful
  see you soon

• change startup for probook 4530 sequence s

  I probook 4530 laptop s... I want to change the startup through utility and Advanced tab startup sequence (I mean the blue screen... not start hp software) when I press f1 it's see the hp system info... F2 is show system options diagnostic... F7 is to see the spare key hp window...  F9 is showing boot device options... F10 hp biosetup (useless) showcase... F8 show nothing. Delete the show noting... ESC show all this key and what do... How can I get into the bios utility to change the boot priority? .. which key can I press to enter the bios setup utlity?

  Product no. A1E83EA #ABV

  Installed windows 7 ultimate OS

  Hello

  Press F10 to enter the Bios.

  Go to the system configuration and choose Boot Options.

  Be sure to save the new settings.

• Satellite Pro C650, boots OK, after Windows starts to the top of the screen becomes white

  Hello

  I have a Satellite Pro C650.
  It starts very well.
  I see Windows commissioning - after start-up - the screen goes completely white.

  Has anyone seen this?

  Am geussing there could be a loose view link - but I have the screen displays the start-up and initial windows startup sequence.

  Kind regards
  eeiddne

  Hello

  I put t think that your display is faulty.
  What happens if you access the BIOS at the beginning?
  To access the BIOS F2 press and turn the device on/off.

  Access the BIOS and let it run for a few minutes and check if the display starts at White.

  In addition its recommended to connect an external monitor and generate the display 2. If the 2nd screen is not OK, then the graphics chip could be the troublemaker.

• OSX does not boot sequence make

  Hello

  I have a MBP 15 "(early 2011). I7 2.2 GHz, 16 GB at 1333 MHz DDR3 RAM and it runs OSX El Capitan 10.11.3 Version.

  A few years ago I have moved the "old" SATA HDD to DVD Bay using an adaptation set and installed an SSD as drive system (and added a few extra memory in the process). Everything worked perfectly up to one month, when all of a sudden, he didn't get through the startup sequence after you enter the system password. The process indicator basically stopped at around 60%.

  Using virtually all options to restart the Mac as explained here (randomly): combinations of keys start for Mac - Apple Support , I was able to recover the system, every time, but after a few days or even a week the problem occurs again.

  Some details of the event and recovery:

  -Mac just stops and restarts

  -You here the start-up tone and see the Apple logo

  -Enter the password for the user

  -Indicator process stops at 50-60%

  Recovery process (do not know which of the following actions really toured well (or which combination / sequence!).) After each attempt to start, I have to do a hard reset using the power button.

  -Try boot in SafeMode (screen remains white)

  -Single user (screen stays white and you hear fan noise)

  -Reset NVPRAM (no difference)

  -Don't start with 'Diagnostic test of the internet' - no defect found during extensive testing

  -Start in verbose mode (machine hangs after that "nspace-Manager-set-snapshot-time" will appear on the screen)

  -Try to boot from USB key (screen stays white and you here the fan noise) to OSX bootable

  -Start in safe mode (it then actually starts in SafeMode as expected)

  -Do a reboot of the 'normal' system (result: MBP starts normally as it should)

  Only yesterday (after the start in normal mode) the screen and the MBP froze showing this (actually using the Console application):

  

  BTW - I did not see this during one of the other occurrences, so I don't know if this is purely related to my main problem.

  My questions (and shout for help :-):)

  -Is this someone has an idea what may be the issue and how to confirm this?

  -In what files newspapers could / should seek to find the culprit (assuming that something related to this is actually connected)?

  -What other tests / scenario could I try?

  Thank you very much in advance for any help, comments or suggestions!

  M!

  It looks like a hardware problem (graphics card). This year 2011 many Mbps this error, he even had a repair action going. I'm not sure that this action is still running. Check with Apple.

• Tecra A2: Very slow start sequence

  Hello

  I use a PC laptop Toshiba Tecra A2, in my laptop startup sequence is very slow, it takes almost 10-15 minutes to display the login screen of the Windows XP splash screen. I formatted my laptop and installed XP fresh twice but the problem is still their.

  Please help me...

  Thanks in advance.
  Floquet

  Hello valerie

  What is some external device connected to your laptop?

• Equium M50-192 - startup problem

  I have a recently purchased EQUIUM M50-192 who developed a problem starting, a week after the purchase. To try to put the following happens
  Press the button power
  Turn on the light appears
  H/D light access appears
  CD-ROM flashes twice
  Then cut the power

  It passes through this sequence also if I open the lid, which suggests that the pc is in standby, IE opening the lid starts above sequence, as if you press the power button / stop.

  The same happens to a power supply (shows, seeing attatched and battery charge indicator) or only to batteries, also tried with battery but running.
  Have tried boot boot from CD via the F12 key and power at the same time but no luck with that, as mentioned above, I think the computer think it is somehow sleep and does not need to access the restore normal startup sequence. Can't find anything in the documentation re this implies a fault. Currently may not resume as collateral as abroad with out the paperwork he's come up with, for the next 6 weeks.

  Any ideas?

  Thanks in advance

  Hi, have you tried to remove the battery and then put back? Is also the adapter work correctly is the status light indicate a complete change?
  If you still not the laptop so that it starts then you don't have much choice but to the send it to Toshiba for investigation.

  Richard S.