PalmOne tungsten e2 PDA

Similar Questions

• PalmOne tungsten E2 6.2 download

  I have a Samsung laptop computer, Windows 8.1, i7 processor, I'm trying to sync my Palmone Tungsten E2.  I bought the necessary Kinvio bluetooth USB, download windows drivers, I loaded the disc that came with the Kinvio and loaded that.  Then downloaded the program 6.2 of website hppalmone.  Even though I have a login program 6.2 internet operational again that he cannot find an internet connection.  I tried to launch Mozilla and windows of Dansnternet browsers and it can not find the internet connection.  The computer continues to display a link very, how do I get the 6.2 to find the connection?

  Hello!  OK - I'm no expert on the subject - so it's just a thought... mine is never able to find the internet connection either so my assumptions is that its an old link to a Palm site that no longer exists.  I just work around it.  You already have the latest Palm Desktop because you have it pulled from the HP/Palm website - so there is nothing to update.

  Just an assumptions - I hope someone with a true knowledge answer you.  Deb

• (PalmOne) Tungsten E2 software installation

  I need to load the driver for my Tungsten E2 on Windows Vista Home edition, I am wanting to use my PDA (no phone yet cause I have a contract with ATT which doesn't seem to have a phone yet?) but want to hot sync my PDA with Palm Desktop... How do I?  I have the software disk, but it does not load.  Windows telling me that it cannot find the driver.

  Hi Maurelle,

  I suggest you to download the driver from the following link.

  Palm Desktop 4.1.4 and HotSync Manager (Windows)
  http://KB.Palm.com/wps/portal/KB/na/Tungsten/E2/unlocked/solutions/article/37014_en.html
  

  Given that Windows Vista is not listed as a supported windows version in the link above, I suggest install you the driver in compatibility mode or contact the manufacturer to get the drivers for Windows Vista.

  Make older programs in this version of Windows
  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  
  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Contacts of PalmOne Tungsten recovery

  Need help with my PalmOne, Tungston recovery. Got msg battery was low so charged for 2 hours, then got answer - just dead screen. Plugged all the next day & night contacts & loaded additional applications were missing. I need my contacts.   Can someone give me instructions of recovery, or I've lost it all?

  Hi JudithW, welcome to the Palm support community.  'PalmOne Tungston' is not a valid name for a specific Palm device.  You list your main unit like a TX.  What is the device that you are referring to perhaps?

  It seems that your device itself somehow cleared by doing a Hard Reset.  This isn't normal behavior for a TX, so I wonder if you have a different device...

  Whatever it is, data is passed to the device.  Palm Inc. consists of the software and cables to exercise a function called "HotSync".  This backup of your data and third-party programs that are installed on a computer.  It is recommended that do you on a regular basis in all the literature supplied with the product.

  If you have done regular HotSyncs, then just make another and information should go back to the device.  If not, then I'm sorry - your information is missing!

  WyreNut

• palmOne tungsten e2

  How can I recover the files of addresses? They disappeared from my computer. Device is supported, but my concern is what is on my computer, not what is in the camera. When it is charged I'll do a hotsync - but why the files disappear?

  Hello Pattykj, welcome to the HP support community!

  We need to know what version of Palm Desktop you are using and what operating system.

  Palm Desktop 6.22 has a known problem, deleting data if the computer is turned off while the program is still ongoing.

  Is the data itself disappeared or the module address missing completely?

  WyreNut

• Palm Tungsten E2 desktop download for Windows 10

  I have a new PC with Windows 10.

  I need your help to find and install the appropriate software so that I can synchorinise with my PalmOne Tungsten E2 and to be able to access the info on my PC too.

  I would also ask please indication of any installation/configuration that may be necessary.

  Thank you

  Your only the most likely option is to download Palm Desktop 6.2.2 which is available for download in the first post of "stickied" on this forum.  I have not tried to install it on Windows 10. Check this thread.

• Tungsten E2 with Notes 7.0

  I just upgraded to 7.0 Notes and software Intellisync synchronizes is no longer with my Palmone Tungsten E2. Anyone know of a solution that allows the synchronization? I'd be happy with calendar and contacts.

  Have you checked to see in Intellisync offers an update for the software version you have. They may have released a newer version.

  Message relates to: None

• PalmOs update

  Hi all! I am from Russia

  I have a PalmOne Tungsten E2. PalmOs version 4.5.2

  How to switch my PDA 5 or up to the maximum output possible?

  Greetings iAhilesik and welcome to the Palm support community.

  Your E2 has already installed PalmOS version 5.4 Garnet on it.  I'm afraid that you might be looking at the version of the Launcher, or 'Applications '.

  To find your OS version, click on the Launcher screen Menu, then "information".  Now, press the 'version' at the bottom.  "Palm OS Garnet 5.4" should now be visible at the top of the page.

  WyreNut

• Installation tools does not; Instead, quick set tent but no longer works

  (Fast) Installation no longer works after that I upgraded to 6.2 Desktop.

  I wanted to install FileZ68.prc to solve the following problem:

  Could not save 1 file (s)
  PmTraceDatabase
  Protocol error: handheld file could not be opened. (4004)
  SYNCERR_FILE_NOT_OPEN

  I downloaded FileZ68.zip and tried to install it on the Tungsten E2.
  But it seems after I've updated two days earlier to Palm - Desktop6.2 can I install is no longer on my Tungsten E2. She always wants to use QuickIntall which is no longer available. !! ??
  Instead, I use * tools * install, but I can not find the application anywhere on my computer.

  Please can anyone give me a tip how do I taggle this problem.
  I tried to find a sollution in the forum, but found nothing.

  The desktop of my PC is running MS-Windows XP home sp3.
  My PDA is PalmOne Tungsten E2: PalmDesktop by AcCESS Version 6.2.2. : 7.0.2 HotSync Manager.

  Thank you
  Louis

  If Palm Desktop 6.2.2 is correctly installed, the installation tool is located in two places:

  1. click the HotSync Manager icon in the toolbar of your PC and choose "install".

  2. start the tool button / all programs/Palm/installation

  WyreNut

• Data transfer Assistant - doesn't recognize palm desktop

  I have a Palm Tungsten e I installed Palm Desktop v6.2 so I could transfer my data on my new Pre phone.  My Pre phone is plugged into the USB port on my computer and I selected the USB key on the phone. I then started the data transfer Assistant, has chosen to run, chose following the Welcome screen, chose following to the login window since I already have my phone connected pre, says next message window ' although Palm Desktop is installed, there is no data to transfer.

  This is incorrect. my Palm Desktop contains data.  Why the data transfer Assistant say that?  The only option is left.  How do I get past this so I can transfer my data?

  I did setup a Google mail account and put that on my phone but it seems not to matter.

  Any help would be appreciated.

  I found the solution to my problem with the DTA does not transfer my data from Palm to my Pre phone.  Here are the steps I took:

  (1) backed up the data of palm on my external hard drive

  (2) uninstalling palm desktop and palm versalmail by using Add/Remove programs

  (3) record deleted program files/palm

  (4) pc reloaded

  (5) installed Palm Desktop V6.2

  (6) synchronize Tungsten E PDA to pc

  (7) made 3 new Palm Desktop: 1 user profiles for the calendar, 1 book, 1 for memos address (got this tip from another validation)

  (8) exported calendar data in the profile calendar, address to the address profile data and data Memo memo profile

  (8) DTA started

  (9) selected a profile suitable to transfer to pre - done 3 times.  Wanted to make sure that each type of data transferred correctly and it also gave me the opportunity to choose where I wanted to save the data

  (10) SUCCESS!

  Hope this helps someone else out there.

• Error: "no connection is available via USB" when you try to synchronize Palm Tungste E.

  original title: problems with my Palm Tungste E and Windows XP

  I have a Palm Tungsten E PDA. I can't synchronize Ho. The Palm shows that no connections are available via the USB port. Palm software only has a connection available in the Installer (Com 1) series. How can I cofigure system to allow me to Hotsync? Thank you very much.

  Hello

  Follow the steps in the following link and check if that helps.

  http://KB.hpwebos.com/wps/portal/KB/common/article/2630_en.html

  Also check the following link for more information.

  http://KB.hpwebos.com/wps/portal/KB/common/article/8594_en.HTML#4

• Palm still has sell handheld computers?

  What terrible store and search system.

  Palm still sell the Tungsten TX handheld? or anyone else?  Or only phones?

  I found the reference to a PalmOne Tungsten, but www.palmone.com takes me to palm.com - which has no info I can find.

  Appreciate any help.

  John

  Yes, Palm handheld computers are always available directly on the Palm Store here.  The link is not accessible directly from the main Palm online store, for reasons relating to Palm by focusing on its current phones and the new model.  I do not understand why they don't seem to sell their remaining stock by putting a link on the Palm Store, but that's the answer I got, with the link above.

  Palm is all about phones and accessories by the departure, and Palm doesn't produce any unit more pocket.  So, when they left, they went.  So far the Z22 is sold out in the Palm store, but TX and E2 are always available via the above link and other vendors like www.amazon.com above WyreNut, and Dell Small Business where the TX is also for sale at $260.  Or if you want to spend a little more for a reason, go to www.bestbuy.com where it is available for $314.

  Message relates to: None

• How to load Word documents (2007) for handheld

  I have a Palmone Tungsten E2; How do you add Word documents on your handheld? Deskstop Palm is not allowing me to add them; so I can't synchronize with my handheld.

  OK thanks, I thought about it I knew not that it was a separate application that is not automatically installed when I run the software. I have since found on the CD and installed. It's a shame, however, it is not compatible with Word 2007, I have to save it as the 2003 version put them on my palm.

  Message relates to: Tungsten E2

• hot sync problem

  I can't hot synch. I get the message "Unable to establish connection" I have a tungsten E pDa and it worked fine until I uploaded in the PDA support photo which I did have.

  It didn't work anymore. I think I can have contaminated the DDA software. I followed the thread for Windows XP Home Edition and reinstalled the latest palm desktop and hot synch and it still does not work.

  If I do a hard reset which will restore all the original PDA software so I can start over?

  Other suggestions are welcome.

  Thank you

  Ziller

  Thank you.

  I've removed any vestige of the Palm of my computer and then reinstalled the Palm desktop and software HS and all seems to work. You saved me from a hard reset to unnecesswary.

  Thanks again.

  Ziller

  Message relates to: Tungsten E

• Sync problem with Palm Tungsten E2 & PC - Fatal Error Message on the screen of the PDA

  Recently my Palm Tungsten E2 will not synchronize with my PC. The following message appears on the screen of my handheld Palm when it tries to sync: "Fatal Error. ' Mgr.c, Line System: 4038, error launching Application. And a "reset" icon under the message that when activated, cause my PDA to reset through the sequence of the display date/time, etc. My PC system is Windows XP Professional. I recently updated my program to sync Palm from 4.2 to 6.2, which does not fix the problem I have. Your suggestions please?

  For this type of error, you need to reset hard E2. I hope that you have all your data in Palm Desktop. After the hard reset, change the desktop hotsync conduits replaces handheld and synchronize.

  Click on the following link for the Web page of kb.hpwebos.com for the article about reset procedures

  http://KB.hpwebos.com/wps/portal/KB2/common/article/887_en.html

  You can export your data for backup purposes, first in case something happens during synchronization.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.