Printhead Designjet 111

Similar Questions

• Designjet 111: HP Designjet 111. Cross any line put in place every time his tour on

  Hello

  I have a HP Designjet 111 with a feed roller.

  The other day one of the printhead needed replacing I did. Now, whenever I turn on the printer, it goes through any line established the points of printing color page. It prints three times which takes about 5 minutes. If I turn the printer market again once he does all this again.

  I tried to replace the print head with one another but same problem. I always use the new genuine HP print heads and HP ink cartridges.

  Once set up over it print without any problems.

  Any ideas?

  Thank you

  This is because it does not have alignment.  It tries 3 times.  Look at the line with the X in the right margin.  It is the color, the origin of the problem.  Just look at the small boxes and you should be able to tell what printhead (s) must always be replaced. If the print quality is very good, then simply press the Cancel button as the first leaf begins to print and it will cancel the calibration.

• Designjet 111 roll: problem with Hp designjet 111 roll

  Hello

  I have problem with Designjet 111 roll. I reinstalled the driver delivered with CD, and the most recent Web site and the effect is always the same. When I enter the Properties window, I see this:

  

  There is no chance to put anything. How can I solve this?

  Hello

  The System Maintenance Utility will not be related to a problem with the printer driver.

  Have you deleted the driver as explained on the following doc?

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-bpp03332

• Designjet 111: Need for Designjet 111 installation CD

  Hello

  Anyone who has a CD to install Designjet 111?

  I just bought a Designjet 111 opportunity.    I realize the printer is obsolete, of course. But it was sent to me without an installation CD.

  I tried to contact HP support, but I have not found all the solutions.

  If anyone has an installation CD, I would be very grateful if you can let me know if you were happy to part with it and for how much.

  Thank you very much.

  Hello

  You can find the SW installation on the following link

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=11203511 & swItemId = pl_84217_5 & swEnvOid = 4063

• Designjet 111 (nominal): Designjet 111 / Windows 10 / instead of pointing it prints to the prn file

  Hello

  I use Windows 10 and Designjet 111 (roll). I already downloaded the driver and everything seemed OK, but after printing the confirmation of the window, rather than send the drawing to the plotter, the next window opens to save the drawing as a .prn file. The button "save to file" in the window "Advanced" is clear.

  He had no problem with printing on Windows 7.

  See you soon

  OK, I solved the problem.

  In the printer properties / ports window 'Print to file' port has been marked. I just changed to the USB port.

• Designjet 111 - printing problem

  My Designjet 111 printed 6843 pages. Almost all were 24 "x 36" CAD. Changes of cartridge & usual ink print head.

  Two days ago the plotter has stopped printing. It was a pdf CAD and got about 1/2 ", then stopped.

  Maintenance of the 532 system error codes:

  # 0, 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 1 S.06.04 SM 02.01: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 2 S.06.04 SM 86.11: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 3 02.01 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 4 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 5 02.01 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 6, 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 7 02.01 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 8 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 9 S.06.04 SM 02.01: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844

  Code of error starting Track = 167 = init PrintHeadControl

  I put in four new print heads with the same result

  Changed the ink also.

  Not sure whatelse to do to get the tracer is going?

  Any help would be greatly appreciated

  Roger

  SOLVED

  You have a printer independent guy tech $80, which has stripped the DJ11 and cleaned, inspected all parts.

  Nothing broken just a lot of cleaning.

  Head of transport that reads the MICR band was dirty.

  HP support (Vijay in India) was useless

  Hope this helps some other users DJ11

  Roger

• About light magenta printhead Designjet 130

  I have a problem of clear magenta printhead Designjet 130 (Ref. C9424A).
  I replaced the print head 4 times in 6 months (with sealed new elements).
  Everything worked perfectly before 24cc of ink (12%) consumed on this print head
  After that, the printer starts strips (with magenta).
  I already try to clean or align them, but not best result until I have replaced this with new print head.
  All other print heads are fine. The system maintenance report PDF file is attached.
  any advice will be appreciated.
  Thank you.

  Remember, once a print head has been damaged by the air in the tubes, it can not be fixed. After you make sure that no air flow inside the tube, you must replace it with a new print head. If you indeed extract the air from the tube and then replace the old print head, you will have to remove air from the tube and put a new print head in the printer.

• Designjet 111 & Jetdirect 635n

  Hi all

  We have a DesignJet 111 and a map of network JetDirect 635n that someone bought for her. When install the 635n and turn 111, it just sits there with the rotation icon and won't work at all. Apparently, do not recognize the card. Any suggestions?

  Thanks Hayes

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• Designjet 111 does not start prinring or stops in the Middle

  Hello

  I recently bought a designjet 111. The first page I printed (linedrawings) came out perfectly, the second page, I tried (linedrawings + a few pictures) the printer no longer starts.

  Now, I have the same problem: the printer just will not start. I tried to turn my laptop and printer, changed USB ports, off the sign 'offline',... nothing seems to work.

  Then all of a sudden it started printing (not sure what I did differently), but stopped after 5 centimeters, drove from the page and cut it. I tried again and then print 30 centimetres and stopped. Now, it does not print at all.

  What can I do?

  OK, problem solved by changing the usb cable to the laptop.

• Designjet T120: T120 - sustainability of the printhead Designjet

  Consider buying Designjet T120 for a small office, where my question:

  What is the sustainability of the print head? (how many pages can be printed)?

  With almost all designjet hp I've seen over the years, the print head life is never determined by the number of pages. There are just too many variables.  Unlike most printers Designjet the T120 T520 doesn't have a separate print heads, but is rather a unit and is replaced as such.  I have not heard or seen any problems with the printhead on this model, so I guess that it will last several years.  With printers Designjet most lack of use is the cause of most of the problems with the printheads.  Also do not have the cart placed above the service station causes problems.  Example the belt has a problem for the plotter stops in the middle and the user plan nor get the fixed tracer for over 2 weeks.  This has a detrimental effect on the printhead (s) as they tend to dry out when not capped.  The correct use and fairly constant use of designjet keep the printheads for years.  I have repaired several hp Designjet printers where the print heads are more than 10 years and still works fine.  However I maintained Designjet printers where the print heads spoil in less than a year with most of them in the latest, due to lack of use.  I also perfer for guests to leave their tracers on all the time.  Less stress on the components as they go through many electrical test when the first being enabled.

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• HP Designjet 111 with 24 "Roll: Arch D is no longer available in the print options

  Normally print us PDF drawing (using Adobe Reader) set to Arch C (18 "x 24"), but sometimes we need D Arch (24 "x 36").

  Ark D has somehow been removed from our drop-down list of options. When I try to use customize the size of 24 "x 36", I get a pop up window that indicates that the size is too small or too large. I don't see any other way to add Arch D in the list of options.

  I tried the update of drivers, but the message says I have the latest. We have been updating for Windows 10 a few months ago and I don't know that it had no effect on these options.

  Thanks in advance for any help.

  Solution, it turns out that the printer now ready for print Arch C value by default, and in the settings is a checkbox to rotate 90 degrees.  When this element is on the Ark D option disappears from the list of options.  Note: Also noted that under the 'effects' tab / resizing Options, we set to Arch C, I think that's the main problem of the loss of the ability to print Arch D; Choose 'full size', now able to print once more drawings D arc.

• HP Designjet 111 24 "color sublimation support

  Hello

  I searched through the documentation, most of the data that can find are: ink-Types(Dye-Based and Ink-Based)

  I need a printer for printing in color sublimation. Is - this model have it?

  Thank you!

  You might have better luck here.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  You are now on the consumer assistance page and the printer you want is probably a bussines unit.

• DesignJet 5500: print head print test very good page, but I still get the error message to replace the printhead

  On my DesignJet 5500, I rswitched the ink tubes, printheads and printhead cleaners dyeing anti-UV, 81 to 83.

  I got an error message saying that the black print head needed to be replaced so I bought another head black printing and after that, I was able to print a test page that shows all the colors (image quality page?).

  Magenta not give not any code of error before, but now I get an error message saying that the printhead magenta must be replaced, even if magenta print well on the printed test page.

  Hello

  The printer give you a warning when the health of the print head is low, but it will continue to print.

  If the problem has been solved after all print head replacement can be that a print head cause others to fail

  Or, just a few bad print heads

• cartridges and printheads for HP DesignJet Z6200

  Produce you cartridges and printheads for HP DesignJet Z6200 or they have been abandoned? I can't find date of production of cartridges year 2014 in stores

  No, it is still relatively a new machine. No, it's not supposed to wait, go, these are great printers, I have 2 years Z6100 6 older old and still great.