Paper size problems

Similar Questions

• Change paper size problem

  Hello. I am writing from Japan.

  My question is about printing.
  I mainly use A4 size paper, but sometimes use B5.
  B5 is a paper based on Japanese traditional paper format.
  The A4 is now major in the Japan, B5 is always used
  and I sometimes print with paper B5 and bind to the B5 file.
  B5 is smaller than the A4, but size 1: 1.4 ratio the same as A4.

  Now, the problem is:
  "Although I change the paper size of the preview window,
  the change will be not taken into account immediately
  and I have to print at least one page with the old settings to set the change. »

  I am so happy if solve you this problem. It'll be more useful.
  Or, you can tell me another good solution or how to change the settings?

  Thank you very much.

  Use the {Ctrl + P} keyboard command for printing, in order to circumvent the preview before printing.

  Bug 1007779 has been filed on the button print, preview printing opening rather then goes directly to the print dialog box.

• Custom with iPF 8400 paper size problem

  I created a custom paper size of 11 x 14 inches for my new IPI 8400. My file is 11 x 14 size and print perfectly on my Pro 100, but when I send it to the 8400 it cut a full inch of my image, send me 3 normal small borders and a big. I tried to re-sizing of the image to 10.75 x 13.75 inches, and it still cuts a full inch of the image. Verification of image on the main page does not change, nor is the page. Printing from PS CC, win 10. Am I missing something here - just may not understand what?

  Hi mk1051,

  It is recommended that you contact technical support direct assistance.  There is NO charge for this call.  Please call 1-800-423-2366, Monday to Friday 08:00 to 08:00 pm et, except holidays.

• problem with the HP 7310 - incorrect paper size fax

  I have a hp 7310 printer/fax/copyer and everything that he was working great until that earlier

  fax work perfect until we started to get a paper size incorrect message when receive us a fax

  We set it up to 4 rings

  We also have a fax set up report

  I tried different formats (as well as in setting up fron a4, letter, legal)

  even tried different weight

  nothing seams to fix the problem

  Thus, when receive us a fax, it rings 4 times... print a blank page... stop and it says wrong paper size... If you press ok, it prints the fax and fax report

  any ideas?

  don't know if it's a part of it as well when we're going to copy something the scaner it going long stubborn to scan... like 5 min it will print the item which has been fine scanded

  Thank you

  anyone until we change our all hp printers out for new... it will not a hp after that

• All-in-one HP Officejet 6500 has: paper size or the type of error message problem

  I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
  I get a paper mismatch (type and paper size is incorrect) error message.
  The printer is not connected to the internet, but it is connected by a USB cable to the computer.
  I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
  This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
  Thanks for your help.

  17/03/2015 #2

  I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

  Thanks for your help,

  LK

• Personalized with Deskjet 4620 paper sizes

  Hi all!

  I currently have problems printing to a custom on my Deskjet 4620 size document.  In my country, the legal size is measured in 8.5 "x 13".  Unfortunately my printer does not support custom paper size print.

  I tried you are looking for a room and speak to an agent of technical support, but the closer, I went to a solution uses a 6980 driver - who has done print legal paper with the correct margins, BUT screwed up the colors (ie. in Photoshop and MS PPT, it prints images colored B & W ones).

  Can someone help me with this? I thank very you much in advance!

  Right click on the printer in the Printers folder and select Printing Preferences. Set the size of the page to legal... 8.5x13 is a standard size for legal. It should not need to set a custom size

• custom paper sizes missing 8610

  I've created some custom paper sizes that are available under a pdf printer but not my hp printer

  Hello

  On 8 x 4 in, you earn a 4 inches in width or length?

  Be aware that a length of 4-inch is not supported by the hardware (5.0 to 14.0 inches) and so not to appear, if this is the problem in fact just change between the height and width settings for the shape and orientation of the paper...

  Shlomi

• Photosmart 5510: customer paper size

  Hello world

  I have never posted on a forum before, but I'm about to have a magma down! I try to print my wedding invitation. they are a custom size of 19.7x13.9 cm., I tried to add the custom paper size by following the instructions on the other posts, but this has not worked. paper/output is missing from the advanced settings.

  help would be greatly appreciated because I alsways bought of HP printers, but if I have to buy a new one for that I won't buy HP I'm worried sick have the same problem.

  Thanks in advance

  Hi @lilrhi,

  Welcome to the HP Forums!

  I see you are trying to print on paper 19.7 x 13.9 cm with your printer HP Photosmart 5510, on Windows 7. And I'm happy to help you!

  According to the specifications of the printer, it is not a supported paper size. The paper sizes supported for this printer are:

  Type of paper

• How can I create custom with the Photosmart 6510 printers paper sizes

  I want to use paper sizes personalized with Word or Photoshop.

  I have a Photosmart 6510 printer all-in-one.

  While I can find the custom size tab layout in Word and can set this size, I don't seem to be able give the new size a name or save it.

  Is it possible with this printer, or is there a workaround to avoid the message 'paper mismatch '.

  Thanks for the ay help I can get.

  I'm sorry not to come back earlier.  I stumbled across a work around for this problem.  Use a different print driver for the printer.  I'll link the instructions below.  Again, sorry I don't come back with the workaround as soon as possible.

  How to assign other drivers to print in different Versions of Windows

• M2Q28A: Deskjet GT 5820 does not correctly print legal paper size.

  The printer does not print correctly if I change the legal paper size it says paper mismatch. a procedure that I didn't change default paper size. then I change th EWS configuration too but the problem is still there. Please help me.

  My operating system is windows 7 and 10 please help.

  Hi @S3dnnie,

  Thanks for getting back to me.

  I was looking at the specifications of the printer HP DeskJet GT 5820 User Guide and it doesn't list legal document as a support for a type of paper supported, but if it has legal papers for a paper Type in the menu drop down, it should be able to print.

  I download and run the HP print and Scan Doctor to check the printer software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know how it goes or if you need further assistance.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• paper size error

  I just updated my HP software (printer is a HP Office JetPro 8500 A910) abdout 2 weeks ago.  Since then, when I try to print from my iPad, I get the following error trhe printer "paper size or type is incorrect.  Press OK to cancel the job.  Two iPads are running IOS 8 (8.0.1 is one the other is 8.1) the same job print fine from my PC.  How can I go back to the previous level of software?

  Consider this problem resolved installing the HP eprint APP open. Once you launch the app on the iPad, it continues to run until you stop it voluntarily.  that is, once it is installed and launched it will continue to operate forever.

  Thanks for the help and sorry I've been so slow to get back to you.

• OfficeJet 7110: unlisted paper size

  To print from photoshop to a super A3 format, 13 of 19 "

  But this paper size is not listed. I don't see anything larger than A4.

  How can I handle this?

  Evening @ppoint.

  I hope that I can offer you assistance with print on 13 of 19 "paper with your Officejet 7110 large Format printer.

  I noticed that you have upgraded to Windows 10, some features may be missing from the initial installation.  You can try to uninstall the printer software. Then download the most recent driver available;  HP Officejet 7110 series full feature software and drivers - Make sure to get full functionality, not only the base driver.

  Did you that your computer has all its windows updates?  How can I tell if my computer is up to date?

  Restart the computer, and then try your print again. If the page size is always missing you can try to create custom paper sizes (use as a rough guide for directions.)

  Please NOTE: With all models, print custom page sizes are n ot guaranteed from Windows, it usually ends up being a limitation of the operating system presets. All these settings are error.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Deskjet 1511 all-in-one: paper size custom unsupported: 1511 HP all-in-one

  HELPPPP!

  The problem...

  

  Personalized my paper size: 10.7 x 13.9 cm (close to 4 x 6, but it is not). I need to create the MS Word template so I can print on these fill-in guest: http://paperprovision.com/product/champagne-hors-doeuvres-invite-set/

  Here is what happened:

  1. I already configure the custom size according to Assembly HP - for Mac instructions (from this link: http://support.hp.com/us-en/document/c03890386) see my screenshot below.

  

  2. I did everything up to step 5 (http://support.hp.com/us-en/document/c03890386), BUT THEN I discovered my custom paper size No IS NOT SHOW ON THE DESTINATION TRAY? (see photo below). WHY IS IT?

  

  The strange thing is... it DOESNT SHOW UP in the paper handling, but it appears on Page Setup > paper size (see below for reference). Or is it not the same?

  

  in any case, I tried to ignore this misshap and print anyway. Then there is... pop up custom paper size projection, not supported in selected status bar. I don't understand...

  Why my custom size not shown in the list of paper handling? How to present it?

  All HELP... Thank you!!!

  Hi @cfransisca,

  Thanks for getting back to me.

  Do you get errors when you check and repair disk permissions?

  If so, I'll keep repair disk permissions until it corrects all errors.

  Apple updates are up-to-date?

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  You use an external HARD drive?

  I would have suggested to search through these discussions for a possible solution. Please use your own discretion. Otherwise, I suggest you contact Apple.

  http://www.wikiguga.com/topic/a8e144de89855b7fe5429961dd33e1d9

  http://forums.MacRumors.com/threads/system-extension-cannot-be-used.1774893/

  If you have additional questions, feel free to contact me. Thank you.

• M651dn: with manual duplex printing only the paper size custom

  Hello

  I have a strange problem with several HP printers in my office (cp4525dn, 401dne, M651dn).

  Automatic duplex printing works as usual if I use plain paper A4 format.

  But when I use a custom paper size (21 x 21 cm), then the 'duplex manual' appears on the screen with the information I need to deliver the document again.

  It's strange. -That someone has an idea if this could be a bug or it's 'normal '. But automatic duplex should work too much here, I think. What you mean?

  It makes no difference if or USB-connected to the local network. I also tried different drivers, without success.

  Thank you very much

  Daniel

  According to the manual the User Guide Laserjet Pro 400 M401 , automatic duplex printing is not supported for custom paper sizes.

  

  It goes the same for my printer LaserJet Pro 400 MFP M475dn .

  I guess the same applies also to CP4525dn and M651dn models.

• HP 9500 win 7 custom paper size tray 1

  I have 12 x 18 paper loaded in Tray 1.  The control panel is correctly set.  Our office has a mixture of windows and Mac and have always been able to print on paper 12 x 18, in the #1 tray.  I recently bought a new computer running Win 7 64 bit.  The driver "HP Color LaserJet 9500 PCL 6" of windows does not support custom paper sizes.  I tried to create forms under the print server properties, but custom sizes do not appear when I'm in my applications.  5 PCL and PCL 6 UPD pilots paper 12 x 18 in option, but when I use these drivers of the printer fails to pull the good paper from Tray 1.  With Acrobat, it defaults to 8-1/2 x 11 paper and prints a second sheet indicating:

  PCL XL error

  Subsystem: VECTOR

  WARNING: IllegalMediaSize

  With AutoCad, using the UPD and printing on paper 12 x 18, control panels flashes and asks me to load the A3 paper into Tray #1.  Change the size of the margin in my application doesn't seem to help.

  I'm an architect and paper 12 x 18 is essential.  Thanks in advance.

  After exhausting any permutation of the driver options, I reluctantly installed the PostScript of the UPD driver.  Problem solved!  Printing on paper 12 x 18 in Tray 1 works perfectly.  There is clearly a problem with the UPD PCL5 and PCL6 drivers.