Parity memory of motherboard errors

Similar Questions

• Find Permutations using perms in MathScript throws memory is full error

  I use the perms Mathscript function to find the possible permutations of the numbers to a number in a table.  According to the Help function permanent , he agrees to 15 items or less.  I can feed this function up to 9 items, but when I try 10 I get the error: LabVIEW: memory is full.  I increased virtual memory by the suggestion in why I am getting "memory is full" error KB.

  The error occurs when Windows Task Manager reached 628 M no matter what I change my virtual memory.  I have 2 GB of RAM in my computer.  Any suggestions?

  Thank you

  What is expected. With N = 10, the final matrix will be 10! x 10, or approximately 36Million DBL elements. Each contains 8 bytes, which bears the imprint to ~ 290 MB for a single copy of the matrix of results expected.

  Looking at the memory usage of the VI for N = 9, is already 100 MB, so it seems there are about 4 copies of the final table in memory. No wonder that N = 10 is impossible.

  I recommend to the instruments in plain LabVIEW (son and loops) with a data type of U8, you will probably be able to go higher than 9.

  Remember that 15 is unrealistic, because the dimensions of the matrix are I32, but the size of the array will be N!. This means that you don't have enough lines for example N > 12 anyway.

  You have a good reason that you need such huge tables?

• How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  Use the disk cleanup tool in Windows XP to clean several types of files and folders are no longer, you want or need.

  "lauraschenberg" wrote in the new message: * e-mail address is removed from the privacy * _xp...

  How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  http://answers.Microsoft.com/message/422fde34-2f99-464c-B6C9-a36c63e2155b
  Tags meta-tags: performance; windows_xp

  Monday 9 April 2012 08:05:37 + 0000: CreateMessage lauraschenberg

• 'low memory - close applications' error messages

  I have 8 GB of RAM and that you have not added all the apps on my work habits, but very recently, I get 'not enough memory - close applications' error messages.  It seems that something is using a lot of RAM.  How can I fix it?

  I have been using RAMMap for a different problem, but it might work for you.

  Download and install and create a shortcut on your desktop for RAMMap and / or PIN to the taskbar. When you sense the system becomes unresponsive, use Ctrl + Shift + Esc to access the Task Manager. Click the performance tab and the resource monitor button. Click the memory tab and check if free is close to zero, or is equal to zero. If it is, open RAMMap, click on empty on the menu bar and the empty queue. This action restores instantly free memory.

  

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• Satellite P200 - 1FC - parity memory error

  I hope someone can help! The laptop freezes randomly with the following message is displayed:

  * bad operation of the equipment *.
  Call your provider of support material
  NMI: Parity check/memory Parity error
  * The system stopped *.

  We must shut down the computer and restart it and now starts without a problem. Previously, we had to leave 12 hours or more.

  Any ideas what could be wrong? Laptop is only 18 months old.

  Thank you very much

  Hello

  I tried a bit with Google and it seems that this message apperas caused a faulty RAM or HARD drive. So, you should try to test the two pieces of material with special test tools:

  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  I hope it's useful for you! :)

• Satellite Pro P200 - parity memory error

  Hi all

  Sometimes, I get the following error message when I start my computer laptop http://www.geocities.com/atesfaye/Mar08_0001.jpg

  It's a Satellite Pro P200 with 2 x 1 GB RAM modules. I ran memtest on the memory installed together and individual modules. The results of the test came with no error. To read the different forums of discussion, some suggest that this error message may relate to graphics memory! Is there a way to test the graphics memory?

  Any help much appreciated!

  Can you tell us when this problem started?
  A has started after the upgrade RAM or other activity?

• Portege 3500 modules - 512MB memory lead to error

  Hallo,

  I tried to upgrade the memory in my P3500.
  There are currently 1 256 MB module installed in the slot under the keyboard.

  I bought 2 x 512 MB PC133 SO-DIMM ram modules, but both lead to errors / beeps from the BIOS. I tried different combinations:

  keyboard-slot: 512
  the location of the bottom: vacuum
  --> long short

  keyboard-slot: vacuum
  the location of the bottom: 512
  --> long short short

  keyboard-slot: 512
  the location of the bottom: 256
  --> long short

  keyboard-slot: 256
  the location of the bottom: 512
  --> long short short

  keyboard-slot: 512
  the location of the bottom: 512
  --> long short (pause) long short short

  It sounds like the bios refuses the 512 MB modules
  I guess what the beeps mean:
  long short - refusal of keyboard-ram slot
  long short short - refusal of low-ram slot

  but according to the manual, it should be possible to install 1 or 2 modules of 512 MB. What I am doing wrong?
  Do I need a BIOS update? (currently installed: "ACPI BIOS 1.20")

  If a new BIOS only supports 512 MB modules - is there a possibility to upgrade the bios from unix?
  (the only download BIOS I found on the support pages unfortunately just Toshiba works for windows)

  Help would be very appreciated...

  Yes, you can improve your 3500 up to 1024 MB of memory (2 x 512 MB), but only with the right modules
  You need * 16 x 32 (16 chip architecture) * PC133, 3, 3v sdram modules (144 pin so-dimm)

  I'm afraid that your 512 MB modules are not compatible :-(you can count the chips on the module, there should be 8 chips on both sides of the module

• Problems with tdms built executable; memory.cpp write error

  Hello

  I have a problem with writing tdms files in bed which executable, that I created with the Builder application in LabView 8.2.1.

  I created a small requesting readings some channels in the DAQmx. This schould results written in a PDM file. All this happens within a while loop, even the steps open-entry-closing-PDM.

  This test in the development environment everything is fine. But if I create an executable file and try this on the same and other computer, I received an error warning.

  The error that says: error on line 342, memory.cpp

  Is there anyone who has any idea what is the problem? What I have to insert something in the creation of PDM application designer?

  best looks, T.Malec

  The problem of TDMS is special to 8.20. However, you cannot run the executable with a new runtime, because the compiled code is not compatible between major releases (example: code compiled with 8.5.0 will run on 8.5.1, but not on 8.6.x).)

  Herbert

• FPGA memory during construction errors...

  I am building an FPGA application for a sbRIO-9636. I just added an element of memory to act as a circular buffer.

  The element of memory is the size of 414000 U8 points. When I build, I get an error in the status of compilation window that starts like this.

  «LabVIEW FPGA: compilation failed due to an error of Xilinx.»

  Details:

  ERROR: sim - user configuration exceeds the number of BRAM in the selected device

  ERROR: sim:963 - initializer property intellectual could not set the basic model IP IP settings

  ERROR: sim - user configuration exceeds the number of BRAM in the selected device

  ERROR: sim - could not initialize the IP model.

  ERROR: sim - generator execution failure of Tcl.

  ERROR: sim - failed generation 'ReallyLongUniqueName_ReallyLongUniqueName '. Failed to run generator for Tcl.

  ERROR: sim:877 - error detected during execution of intellectual property "block memory generator v7.3.

  Release 14.7 - Xilinx CORE Generator P.20131013 (nt) Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved.

  I have attached the error any reading.

  Help, please!

  I just realized why I see this error. The sbRIO-9636 comes with 2 088 kbits of RAM block. I missread the quantity in 2 088 kbytes of RAM block, me wanting to use 414000 bytes will not work.

  Thanks to all those who are looking into that.

• First round with resampling of wave and the memory is full error

  Hi all

  I have a little problem with my VI that I don't understand.

  I'm doing a motor controller application that can take a random waveform and TTL signals for a motor controller.

  It's all good, but the first time I run VI I get a memory full error (see photo)... It is only the first time after I opened labview I get

  This error... Second time I have start the VI, it works as it should. I guess it's something to do with what kind of data it records in memory.

  Looks like it has something to do with the function resample, but exactly what I'm not sure...

  I hope some of you guys (or girls) are able to help me, thank you!

  Good day!

  Kind regards

  Tommy

  

  

  Got yourself into a race condition.  We all have a time.  Delete the local section and use the wire.  Check out this thread for more information on just how many of us have done

• Call to Ini_New causes dynamic memory is corrupt error

  I'm with LabWindows/CVI 8.5.1 to implement a dll that is really just a customization of the frontend.dll dll teststand used to connect to the Teststand sequence editor. Incidentally, I either work with TestStand 4.1. Unlike most messages about similar problems, I see the error on the first call to Ini_New. The problem seems to be that I do 2 later calls to the exported functions of my dll, even if the variable I write the return value of Ini_New is defined locally. If I move things such as I make a call to my dll, it works... I don't understand what I'm doing wrong. The other thing I see is that after the call Ini_Dispose the end of my function, the pointer is not released, but who will be the subject of another post, I guess.

  Any ideas? I can't post my code as is, but if I have to I can make a generic version of this dll that I, as a last resort.

  Do not take into account my previous post, I figured out that I was using strcat in several places without properly allocating memory.

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• copy images on memory stick? error code: ox80070570

  I cannot copy photos from my computer to a memory stick via USB. Sometimes it works, but sometimes an error code is displayed (OX80070570). Any ideas?

  Hi Lilactree123,

  Welcome to the Microsoft Answers site!

  Are a. When you facing this problem?

  B. recent changes made on the computer?

  Have c. you tried a different USB Port?

  Are d. you the same error with other memory sticks?

  I suggest that you format the memory stick and then copy the photos and see if you get the same error. Also check the memory stick on another computer to make sure that if there is a problem with the memory stick.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Pavilion dv6 Vista Recovery - dump of physical memory w / code error 0x000000F4 (and other)

  Hi all

  It's my first time posting in the forums so I hope I picked the right place and will do my best to be brief but informative.

  Computer: HP Pavilion dv6000

  Operating system: Windows Vista.

  For 6-8 months, he was unable to run Windows Update, citing that the most likely reason was a virus. I tried many power outages of options when it was recommended I have perform a chkdsk command. After the launch of a chkdsk in command prompt command, my computer has restarted and has a black screen with no cursor. After watching this 2 hours and realize that none of the usual chkdsk or text progress was that I made the decision to force stop.

  When I rebooted, I was told to enter the system recovery which I did and completed a recovery of the system from the hard drive. After the system recovery finished and the laptop has rebooted, I encounter a Blue Screen of Death, due to a physical memory dump. The error codes are STOP: 0x000000F4 (0xFFFFFA8006671040, 0xFFFFFA8006671278, 0 x 0000000000000003, 0xFFFFF80001D01DA0).

  I'm not able to boot in safe mode. In the Startup Repair, I am able to get into command prompt, where I again chkdsk. The f / chkdsk and chkdsk r / passed without error. In addition, the computer has spent the two disk hard UEFI and memory tests. I have the recovery CD for the computer system, but they fail at the end of 78%.

  Please let me know if you have any questions or would like more information. I would appreciate any advice!

  Thank you!

  After trying some of the various troubleshooting methods available in the HP's Support Forums, I finally created a new set of recovery disks of Windows Vista, follow the procedure described in this post. These discs have managed to perform a restore of the system and solve the BSoD error that I lived.

  Thanks for your help!