Satellite P200 - 1FC - parity memory error

Similar Questions

• Satellite P200 - 1FC: CD/DVD player won't start - error Code 10

  My Satellite P200 - 1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD drive is listed in the device as "TSST corp CDDVDW TS - L632H ATA Device" Manager.

  Initially, the drive worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  By clicking on 'could not load driver software' product solutions but not solution.

  The search for similar issues in the forums of users suggests that use of a page of Microsoft Support Help & directed "the CD-ROM drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".

  However it is to change the registry! As a relative novice, I am reluctant to do unless I can find no easier way.

  Should I bite the bullet and and enter into this minefield, or is there a better way?

  > At first the car worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  Certainly, this error is caused by an incorrect registry entry.
  I had this error several times and I solved this disassembly of these registry keys upper and lower filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here are a few steps how it worked on my Windows system;
  -J' removed the Device Manager CD/DVD drive
  -Then edited the registry as described above
  -Restarting the laptop

  I'm sure that this will also help you.

  Good bye

• Drivers Windows xp on Satellite P200 - 1fc

  Hi all

  Don't want to look stupid. A couple of days ago, I installed xp on my laptop and I downloaded the drivers I needed, the noise, the wlan and so on. But what I really need to know how to install them? I know it sounds really thick but I open the files and double-click the installer and it says install, but after that's over nothing at all! I installed wlan and hotkeys, but able to get its installed.
  Please can someone help me?

  I have a Satellite P200 - 1fc

  Thank you

  Hello

  Hmm. Your post is funny ;) but don't be angry with me about this comment ;)

  The installation is really easy. If there is a setup.exe you need to start this file. Then, the installation should begin.
  If the setup.exe is not present then you must install the drivers from the Device Manager. Here, you have to choose the device and point to the downloaded driver package.

  Installing the audio driver is a little more complicated. First of all, you need to install the XP patches and fixes Microsoft KB888111 and KB83522. And then, you must install the audio driver.

  Ciao mate

• Satellite P200 - 1FC - key product Vista not legible, do I need?

  I have a Toshiba Satellite P200 - 1FC and his original running Windows Vista Home premium edition (originally installed when I bought it). I have the original CD that came in the box.

  I want to reformat the hard drive and reinstall Windows Vista but the sticker under my laptop is more readable. Do I need if I reinstall windows vista with the supplied with the laptop recovery disks? If I need them in the installation process, how can I recover my instalation key because sticker is removed clean and not readable? He's somewhere in a file on my computer or I have to get microsoft to get it back for me?

  Please help me I don't want to take a chance to ruin the perfect system just because of the instalation key. Thank you

  Hello

  If you need to install windows with recovery disk, you don't need key installation :) But if you want it back before installation, you can use a program like Keyfinder. It retrieves the key of Windows and Office series

• Satellite P200 - 1FC - CD/DVD does not read discs

  I have a Satellite P200 - 1FC ' CD/DVGW TSSTcorp TS-L632D ATA Device will not read CDs or DVDs and do not respond. Device Manager shows that this device does not work correctly.

  Can you please help?

  Hello!

  Try to remove the drive from Device Manager CD/DVD, and then restart the laptop. It work?

  If this isn't the case, you should try to remove the upper and lower filters:
  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• A few questions about Satellite P200 - 1FC

  Hello

  I am planning to buy Satellite P200 - 1FC but I want to know:
  -What is the hard drive speed (RPM), is 4200 or 5400?
  -What is the capacity of the battery 6 cells, 9 cells and how many mAH?
  Does anyone have this laptop battery and haw do under normal conditions of use?

  Thank you
  Ivan

  Hello

  I m not the owner of a Satellite P200 - 1FC but I found a very useful information on this notebook on the official page of Toshiba.
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?PRODUCT_ID=137284

  I have goggled autour also and have seen this info:

  > - What is hard drive speed (RPM), 4200 or 5400?
  250GB (4200 RPM) SATA 12.5 mm

  > What is the capacity of 6-cell, 9-cell battery and how many mAH?
  6 cells but the AMM is not known to me

  Maximum range: up to 02:20 pm
  But you should know that it is only an approximate value, because the battery working time depends on the use of the laptop.
  Using this laptop you can expect a time of 1.5 hours battery work

  Best regards

• Re: Satellite P200 - 1FC - what DVD burners are compatible

  Toshiba Satellite P200 - 1FC - need advice as what to buy to replace the dvd burner that does not burn.
  So is going to replace.

  Thank you ricky

  Hello

  You need a compatible because different master/slave/c-salt settings.
  I m not very well what drives could be supported, but in my user manual which was preinstalled on my laptop (unfortunately not P200) I could find a list of compatible drives. Maybe your manual contains a similar list

  But if you won't find details of compatible media in you manual user then you may contact the service provider allowed in your country and could order these ODD.

  Welcome them

• Satellite P200 - 1FC: no sound after system update

  Yesterday my laptop did an update of the system for Windows and when I restarted the computer, my speakers did not work, my ATI graphics card was not found and that the reader has stopped working.

  I don't know what happened, but I don't think that the update installed correctly.
  I had a similar problem on my old laptop with XP and I due simpy reinstalling the update.

  For some reason I can't do this on my current.

  I use a SATELLITE P200 - 1FC.

  Is now SP1 for Vista installed?

  I ask this question because I got message on Vista updates and SP1 was who listed there. I'm afraid, it can have a negative influence on the good OS and I'm quite skeptical about it. For now, Toshiba does not support Vista with SP1.

• Re: A few questions about the Satellite P200 - 1FC

  Hi people,

  died on my trusty laptop and I need a new. The P200 - 1FC seems to do the trick, and I have a few questions that I hope this is the right place for.
  Is there a hardware switch (or key combination) to disable the touchpad? Y at - it an indicator of the State of the touchpad?
  Is there a hardware switch to inactivate the wireless network components?
  Is it possible to add physical memory to the dedicated graphics card?

  I know you can Filch system memory to increase the available for graphics operations, but is it more logical to add system memory or add graphics memory.

  What is the equipment for the memory locations system config factory base with 2 GB of RAM? There are 4 slots or 2? Are they all filled?

  How is it difficult to "downgrade" to XP machine? Will there be XP drivers available for all components?

  Thanks in advance for any help.

  Hello

  I m P200 not owner, but I'll try to answer your questions.

  > Is there a hardware switch (or key combination) to disable the touchpad?
  Yes, the FN + F9 key combination should enable and disable the touchpad!

  > Is it an indicator of the State of the touchpad?
  Well, in the taskbar you should get a notification icon if the touchpad has been disabled

  > Is there a hardware switch to inactivate the wireless network components?
  Yes, the WLan switch is available on laptop computers (probably on the front).

  > Is it possible to add physical memory to the dedicated graphics card?
  No, the graphics card supports an its own local cache. Graphics cards support also hyper memory. This memory hyper depends on the amount of main memory. Total video memory is the sum of the local cache and Hyper memory.
  But once again; physical memory cannot be added.

  > What is the load out for the locations of system memory in config factory base with 2 GB of RAM? There are 4 slots or 2? Are they all filled?
  There are 2 slots of memory and the laptop has been delivered with 2x1024Mo modules.
  The laptop supports 4 GB max memory, but as much as I know Windows 32 bit does recognize only 3.02 GB due to the limitation of the 32 bit OS!

  > How is it hard to "downgrade" to XP machine? Will there be XP drivers available for all components?
  It of not difficult to downgrade the laptop to the XP operating system.
  On the Toshiba site
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
  You should find all the drivers for the P200 PSPB6 XP

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• Satellite Pro P200 - parity memory error

  Hi all

  Sometimes, I get the following error message when I start my computer laptop http://www.geocities.com/atesfaye/Mar08_0001.jpg

  It's a Satellite Pro P200 with 2 x 1 GB RAM modules. I ran memtest on the memory installed together and individual modules. The results of the test came with no error. To read the different forums of discussion, some suggest that this error message may relate to graphics memory! Is there a way to test the graphics memory?

  Any help much appreciated!

  Can you tell us when this problem started?
  A has started after the upgrade RAM or other activity?

• Re: Satellite P200-1EE - displays an error message in the windows Boot Manager

  I left my laptop alone and down for a few hours and when I'm back on him shows an error message in the windows Boot Manager.
  It says unable to start windows and a recent hardware or software change might be the cause. It asks me to insert my windows installation CD, and if I n t have the CD then to ring for help but unfortunately I really can t find a number at the present time.

  It also reads this:
  File: \BOOT\BCD
  Status 0xc000000f
  Info: an error occurred trying to read the boot configuration data.

  Does anyone know how to deal with this, or this happened to anyone before?

  Hello

  Maybe this article can help http://support.microsoft.com/kb/927391

• Satellite P200 - 1fc - how to fix the connector cc

  I damaged my laptop power connection.
  The only way to the laptop acknowledges that I'm hip is if I push hard on the adapter or rotate in a certain way.
  Can it be fixed and if so, how?

  Hello

  It is a job for a technician to the laptop.
  To replace this connector DC, the whole notebook must be dismantled and believe me; It is not really easy, but very delicate!
  In addition it s unclear to me if this DC connector is welded to other rooms.
  Therefore, I would not recommend unveiled for this problem in your own hand.
  You could damage the motherboard and it would be the worst case, because a mobo is a part of portable more expensive!
  I think that its worth to pay a little for a short workaround as to risk a complete laptop damage!

  Greetigns boyfriend

• Satellite P200 - 1FC dies reboot after installing Vista SP1

  As recommended I tried to install the service pack for Vista, but when he tried to restart I got "the installed program cannot start. Click OK to turn off the computer. »

  It will not restart in safemode, or any mode, actually.

  The drive only what i've got is the recovery disk that says that if I use it I lose all my data. Microsoft says 'Toshiba to ask. "

  So, here I am.

  Any ideas?

  If you want to ask Toshiba then you will need to call the support hotline
  This is a user forum and as much as I know there is no people of Toshiba

  So now you deliver what laptop do you have?
  How have you tried to install SP1?

  More details are needed...

• Satellite P200 - 1FC - new ATI display driver

  We need a new ATI display driver: there are problems with browsers that are determined by the date of the display driver. A former pilot, and there is no WebGL for example with Firefox.

  The latest issue of Toshiba was 2009.

  Hello

  The laptop supports the Mobility Radeon® X 2600.
  Have you tried the driver from the ATI driver page?

  Usually such driver may be installed via the Device Manager.
  Choose the graphics card, select the Advanced Setup, this would help you to force the Win OS to select the downloaded driver.
  This should work but notes; the page ATI driver doesn't support protection against overheating. So, this could lead to a higher temperature of GPU