Restart in standby mode

Similar Questions

• Cannot restart; Function F8 does not work; stuck at "restart windows." Put in standby mode.

  Put the PC into standby mode.  Stuck in the status of "Recovery of Windows".  Impossible to restart.  Power off several times.  F8 doesn't work no more.

  I don't think that XP shows a message "Windows Recovery" when it comes out of Stand By.

  It does when it's Hibernation.

  If you've been cycling power, you can have damaged your system files a bit and should probably start by running a chkdsk/r from the XP Recovery Console.

• Satellite 1800-314: when I close the lid it won't go in standby mode

  I hope someone can help.
  I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

  Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
  I'm tired now.
  Is there a simple solution that I'm missing?

  Grateful in advance for any help!

  Hello

  You know it's very important to install drivers in the correct order.
  The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
  If the energy saver has been installed on the operating system windows power settings will not work.
  Toshiba crash parameters the parameters of Microsoft.

  In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
  But be careful. You must use the good BIOS and the right procedure upgrades.

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Switch 10 (64 GB, 1920 x 1200) - BSOD in standby mode (standby)

  Hi people,

  I have a stable problem with my new Acer Switch 10, 64 GB model with screen 1920 x 1200 - if I pass automatically in standby mode (standby mode), I have about 50/50 to find it restarts when I come back to it - at some point during sleep, it falls in a "your computer has encountered a problem and needs to restart. It was 1 day of use - I encountered this already 10 times, that's why I decided to ALWAYS switch off the shelf by judgment. This is not very practical. I checked with BlueScreenView minidump files - error is still the same, catches of attached check screen

  

  

  Should I send it to the service? WIndows is preinstalled, all including the BIOS updates are installed.

  Minidumps can be downloaded here - https://drive.google.com/folderview?id=0B7Gf-eniqaBzdlBwa0pWeDhSNWc&usp=drive_web

  After I've sent my crashdumps bugtracker VirtualBox I pointed a wireless driver for Realtek which seems to cause the problem. Unfortunately the version installed is the last provided acer.com on in support area - v3007.2. I had to look for a newer version of this driver and managed to find an HP website. More details can be found here - https://www.virtualbox.org/ticket/13902

  The new (v.3007.6) driver for Realtek RTL8723BS wireless SDIO card can be downloaded here - http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=ru&lc=ru&dlc=ru&softwareitem=ob-140101-1

  In addition to solving my problem, it also fixes ad one when sometimes wifi connection becomes limited and no network do not appear until the reboot (or sometimes assisted flight mode). I recommend all users to Switch 10 update their drivers. It's a shame that Acer provides no drivers on the official site updated.

  Problem solved.

• Suddenly I can put is no longer the computer in standby mode manually or automatically.

  Original title: Control Panel - Power Option

  Suddenly I can put is no longer the computer in standby mode manually or automatically.  I can only turn off or restart.

  Hello

  1. do you mean to say that the Standby button is greyed out?

  2 How long have you been faced with this problem?

  3. don't you make changes on the computer before this problem?

  Check the question in the clean boot State and send the same return. Also, contact the manufacturing of computer for BIOS update.

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones can access in standby mode

  I just bought a Curve 8330 last week. Like it, but the mute has stopped putting the unit in standby mode. It seems doing nothing now. I have perhaps inadvertently pushed the toggle button up as the mute. Don't know why it would turn off. Has anyone else had problems with this? Any suggestions?

  You can try to reset the unit? With the device on, just remove the battery for 30 seconds and replace it. After restarting the device, try using the sleep button

• Videos stopped playing on all websites, just get black screen. Fixed not clearing cache and cookies and restart in safe mode.

  Fixed not clearing cache and cookies and restart in safe mode.

  Your system details list shows two plugins Flash, a Flash 10.0 very old version you must uninstall (remove).

  1. Shockwave Flash 11.7 r700
  2. Shockwave Flash 10.0 r32

  Manually, see "uninstall a plugin:

  • https://support.Mozilla.org/KB/troubleshooting+plugins

  See also:

  • http://KB.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

• Portege 7140CT Shutting Down in Standby Mode - cannot close normally

  Hello. I bought a laptop Portege of CT 7140 for my son. It is a very good unit but has a "Shutdown" problem - only it used to closing, that is. It seems to power off, but the 2nd of the LHS on the front of the device flashes slowly. The user's guide explains what happens when the device goes into "Standby" mode I tried all the options of FN + F3 (off, standby and Hibernate) with no difference. I disabled the feature key installation in the Panel. I disabled the "Hibernate" mode in the control panel. All to nothing does not. Someone at - it an idea why this is happening and how can I solve? Thanks a lot for your help. Mike

  Hello

  I never heard of this problem, but maybe to reinstall the system can solve it.
  Or perhaps reinstall or update the BIOS will help you.
  I'm sorry that I don't have a better idea.

  Good bye

• Model # 860-180 st: computer will not go to standby mode

  I just got this computer HP, model # 860-180 st, not even a month, "sleep" mode was working fine when I got it, but now it will not enter sleep mode. I checked everything in Control Panel, power options, so I don't know what the problem is. People of the idea?

  Jay_101 wrote:
  

  Greetings,

  Also check out tips found on thissite. She aims to win 8.1 but will also help to win 10.

  First generate a report of power. This will tell you which prevents the day before.

  See you soon!

  Hello Jay_101,

  Thanks for the link, I found what was preventing the computer in standby mode. It was the srvnet thing.  This link has all the tips and trick to solve this problem.

  I owe you a lunch.

  I contacted the HP Support by phone, the call is routed to the India, where else? The guy wanted remote access to my computer, I said no way Jose. These types of support for HP in India are unnecessary. All he wanted was Remoting to my computer, since I refused he won't talk to me more.

• L50 - A - 160:USB of power in standby mode satellite is disabled but it STILL works

  Hi all!

  It's my L50-A-160.

  USB power standby is disabled in the BIOS but it always on!
  Nothing helps.
  As I can not turn off wakes on keyboard events. BIOS 1.30.

  Thanks for the advice in advance.

  Hello

  You are talking about sleep function & expenses supported by some USB ports?

  Be aware that not all media ports USB Sleep & Charge and only marked with a small sign flash USB ports would give such function.
  As far as I know on Satellite L50-A-160 only USB 3.0 (on the right side) would support this sleep & Charge USB.

  The charge & sleep can be enabled and disabled in windows.
  Go to desktop-> Office Assistance (in the task bar)-> utility tools & -> Control Panel

  There you should find the different tabs and one of the tabs should have sleep & fresh / tab sleep & music which allows you to set advanced features for the mod, Hibernate standby mode and stop mode.
  Simply move the slider to activate or deactivate the function sleep & Charge.

  But the sleep & fees may not work with certain external devices even if they are compatible with the USB specification. In this case, turn off the power of the computer on the charging device.

  You should also be known that when sleep & cool man of wake-up function is activated USB does not work for the compatible ports.

  In addition, there is an option called function in battery Mode. This option can be used to toggle the sleep & Charge in battery mode. It also displays the remaining capacity of the battery.
  Simply move the cursor to enable or disable this feature.

  By the way: read the user 95 manual page. It would be useful for you.

• Satellite Pro L10 does not go on standby mode

  After a virus and reinstall all my programs and drivers etc, my computer won't now, go in standby mode.
  When you go to "turn off computer" option ensures their but is grayed out and you can not click on it.
  Power options in my Control Panel on them is not an option to set the day before to the top.

  Can anyone help?

  Hello

  In my view, a Toshiba Power Saver must be preinstalled and there you should be able to enable or disable the standby or hibernation mode.

  Check it!

• Satellite Pro M40: Standby Mode active when you press the sign @.

  When I'm connected to the internet and I press the sign, a message pops up saying: 'do you want to switch to standby mode ' @?

  Anyone know what I can do to stop this message coming?
  As it prevents me using the sign @!

  Thank you!!

  It's very strange
  You use the right keyboard language settings?

  Do you use the preinstalled OS original Toshiba?
  Please check to see if the same problem happens using laptop computer with factory settings!

• my iphone was droppped and custom lights, but you can which is a light on it as if it is in standby mode. is there any fixes for this.

  my iphone was droppped and custom lights, but you can which is a light on it as if it is in standby mode. is there any fixes for this.

  Try to do a reset. Hold home and buttons power together for 30 seconds or until you see the Apple logo.

  If that does nothing, there's a chance that the LCD connector has partially disconnected. Although it is most likely your LCD is damaged.

  Apple may offer a replacement of the screen. You must check in your country, how much they charge.

  Alternatively, you can look for a reputable independent repairer who can replace the screen for you. This means waive all the Apple warranty services. But it's a bit less expensive for a C. 5 If you go this route, choose a repairer who offers a guarantee of 6 to 12 months. And don't go with the cheapest.