Part of the black screen?

Similar Questions

• Windows Vista will not start up - keep getting the black screen

  I read through the questions answered similar questions and still can not past the black screen with windows vista.  It's on a dell inspiron 1525.  Also, it does not start in safe mode and I tried booting from the last good configuration and is still stuck on the black screen.  This just started a few days ago, and the computer was working fine until this date.  Can you help me?

  Hi Jimazona,
   
  1. from when are you facing this problem?
  2. any change in software or new hardware on your computer?
    
  Method 1:
    
  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.
       
  Method 2:
      
  I also suggest you perform a startup repair and check if this solves the problem.
     
  Follow the steps below:
     
  a. Please insert the Windows Vista DVD and restart the computer.
  b. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
  c. Select your language settings, and then click Next.
  d. click on repair your computer.
  e. Select the operating system you want to repair, and then click Next.
  f. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
   
  Access the link below for more information on the Startup Repair:
  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  See also:
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/   
   
  I would like hearing that the results back on your part about what happened after trying each method.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think. 
  

• My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

  It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?

  Hello

  If under warranty contact Dell

  http://support.Dell.com/

  or ask in the forums Support of Dell

  http://en.community.Dell.com/support-forums/default.aspx

  If it is under warranty, contact a reputable repairman, local computer

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• HP envy: stuck on the black screen

  Hello, so my Hp Envy is stuck on a black screen. It's a screen lit, but it does not load windows. I tried a hard reboot, nothing. I've updated the BIOS and it seemed that nothing was happening then loaded windows. My antivirus has been turned off and need to restart the computer now its stuck on the black screen turned on again. Help, please!

  Hi @Jaxibrey,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP ENVY laptop and having starting problems.  Try to make a hard reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to put the laptop in Safe Mode. Then you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. You may need to consider a few days before that the issue that has happened.

  Here is a link to computer does not start for Windows.

  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.

  I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there.    How can I automatically have the black screen disappear.

  Hello

  Use it as the last command in the file beats.

  OUTPUT

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• ACPI.sys corrupted at startup disk on the black screen windows

  When I start my computer normally all I get is a black screen with my cursor on it before I reach the log on screen (but after normal of the windows startup process).  I tried Ctrl alt del and nothing happens, there is no beep or anything along those lines is.  I tried safe mode, but exactly the same thing happens, I get a black screen with white inscription around the edges, telling me that I'm in safe mode and my slider is still there and moves, but other then that is all black screen.  Ctrl alt delete doesn't work or any other key press on that I skipped.  I put in my windows XP CD and he would try to repair or reinstall the operating system but when I boot on the CD, it starts to load normally and then stops and gives me the error message "the acpi.sys file is corrupted.  Press a key to continue' when I press any button it goes upwards and brings back me to the black screen with the cursor.  I tried to go into the BIOS and turn off acpi but the loading and the startup disk produce the exact same results any bios settings I try.  Any help would be appreciated, either for obtaining windows at startup after the black screen without the startup disk or get me to the point where I can still use the CD (which I should mention that I have used before and it worked well, is the one responsible for my windows XP in the first place and who is clean and scratch free).  Thank you for any help or advice.  Oh, and I must add that I have installed any new software or whatever it is like in the last month or two, so I don't think it is something like that.

  Hello usernamerandom,

  Take a look at the sticky thread depending on which was released 21:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/why-do-i-have-a-black-screen-when-i-start-Windows/ddf978da-4ba1-49dc-8844-2407c3fc1c82

  Best regards

  Matthew_Ha

• How to fix the black screen of my hp pavilion g6

  How to fix the black screen of my hp pavilion g6

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• HP pavilion g6 stuck on the black screen with cursor 8 windows

  Hello.

  I used windows 8 perfectly... but today when I rebooted my laptop I don't have the 'Press esc to access the configuration menu"and once loaded in the windows icon. It got stuck on the black screen...

  Any ideas or suggestions? How can we get? Icannot go to the start menu cannot load the... Task Manager what can I do? Also the battery also affects bones

  "It was a moment cartoonic, when gravity stops for coyote to make him realize that he was wrong from the beginning."

  Hi, I did a hard job looking for a solution, and after a while, I found a solution. The solution to the problem was a little easy, but at the same time a bit funny too, hehehe.

  The solution was, when I removed the battery, then did what you told me, I even! Even the black of the same screen cursor. Then I tried power the computer nothing do but simply by pressing the power button without the battery in it. The laptop ran using cable ca, and then I was able to use the windows. Its perfect work. Now I have piles in too and its still in good condition.

  Now what do me? Should I replace the battery, I get error 601 (main battery) too. So should I replace it with a new one? I hope that it will be more preferable.

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• How to rebuild the shop catalog of Vista drivers to BYPASS the black screen!

  I need help to rebuild the secure boot shop, this is the only way to get around the black screen...

  How to restore the original display drivers!

  Safe mode does not work

  CTL-Alt-Del does not bring a window to run the Explorer or

  Note: only this, already have SFC, CHKDSK and several other tests!

  Thank you to all who share this problem

  Help, please

  Hello

  To help you better, please answer these questions.

  1. what happens when you try to go to Safe Mode?

  2. are you able to boot to the desktop?

  3. What is the brand and model of the computer?

  4 have had any changes made on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Run a system recovery options system restore:

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2: Start the computer in low resolution Mode.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-in/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: follow the section that talks about allow low resolution.

  Method 3: Update the display drivers once you start on the desktop.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also recommend to download latest display drivers on the manufacturer's Web site.

  For your reference:

  About the driver catalog

  http://TechNet.Microsoft.com/en-in/library/bb693493.aspx

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Error, your computer could not reboot after a unexpected, stuck on the black screen

  Original title: Vista startup repair freezes after that give the message "your computer could not restart" and he said that it is looking for problems. I use the original windows disc

  We had a power failure and the computer showed only a black screen.  When I rebooted it, she ran correct problems and they went to green the black screen with scrolling icon on the bottom, which freezes after 30 seconds or more.  I put in the original disc of Vista and ran the fix repairs.  He said it is looking for the most likely, but freezes with blue tab, stopping in the middle of the page.  any thoughts?

  Hello

  You get an error message or code?

  Method 1:

  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.

  Method 2:

  Step 1:

  I also suggest you try to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you're able to boot in safe mode, you can perform the system restore to the date when the computer was working fine and check.

  Step 2:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1

  Hope this helps and keep us informed if you need help.

• I got the black screen of death & now im getting disk boot failure, insert system disk

  original title: I had the black screen of death & now im getting disk boot failuer, insert the system saying

  I got the black screen of death & now failure boot disk, insert the system disk, which I don't have. Help.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence