partition Bootcamp will start not Fusion, but if started directly

Similar Questions

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Launching applications from partition Bootcamp without starting the virtual machine

  Hi all, installed Fusion because my colleague was furious about how you can launch applications without even opening the windows. But I was not able to do. I use a Bootcamp partition and is not, and I'm assuming that this is the reason why this feature is not available for me, but if someone could shed some light on this would be great!

  Thank you

  I think that your colleague is a bit confused. By definition, any product of virtualization to run a prompt to perform a request for comments. If you start in Unity mode, you might see Windows not running, but it's there. I suspect that what your colleague is talking about is the suspension in Unity mode. If you then start a Notes application, the virtual machine will resume, and since it is in Unity mode, it will appear to run the comments without Windows display application.

  Run a Boot Camp virtual machine means that you can not suspend (or snapshot, but that is irrelevant to this issue) because this can lead to corruption of the disk.

• A key will work not (tilde), but only in one of my Windows 7 profiles

  I am running Windows 7 Home Premium (x 64) Service Pack 1 (build 7601).  My history of update said that everything has been installed.

  The tilde / single quote left-button (just below ESC on my keyboard) does not work in my regular profile - won't work in any program at all.

  But it works in the other profiles that I put in place.

  I tried three keyboards; It is not the keyboard.  I tried both wireless and USB.

  I tried to remove the device drivers by using Device Manager, and then restart.  Did not help.

  Any help?

  Dear Niranjan Manjhi,

  1. I tried to use the instructions in the link you provided 'fix a corrupted user profile' which specifically stated that the profile contains settings "funds of screen, screen savers, pointer preferences, sound settings and other features" would be transferred to my new profile if I followed the instructions.  However, none of my desktop settings imported into the new profile, such as the wallpaper, the items on my desk and the changes in my menu start.  So, I tried a different approach (described below) first and foremost try to rebuild my profile.

  2. at the end of the day, I found the problem, it's * not * a corrupt user profile. The problem was a setting in the control panel / region and languages / keyboards and languages.  (I went to this setting as a general search on the internet revealed that the community of players has had some problems with the tilde/grave key.)

  Under the button 'Change keyboard', I did the following.

  one) by the suggestion players, under 'Général' community, removed keyboard "Us - International", leaving only "keyboard = US" and "Other = Correction of ink" (this last I learned is for my tablet of entry).  This change has not fixed my problem himself, even after a reboot.  But I left it like that. Then next...

  (b) under 'Advanced settings key' to 'To the English', I used "Change Key Sequence," uncheck "Enable Key Sequence, which had been fixed for 'Ctrl-Shift' + 'Serious'.  However, neither this change has fixed my problem himself, even after a reboot.  Then I tried then...

  (c) under 'Advanced settings key' for "Between the input languages", I used 'Change key Sequence' to change the "switch Keyboard Layout" of "Accent Grave (') to"All Unassigned".»  [I left ' switch an input language "to"Left Alt + shift."]  THIS CHANGE CORRECTS MY PROBLEM.

  I would like to mention that the manufacturer of keyboard for my Unified Wireless keyboard and mouse was kind kindness to send me a whole new set, in the hope that it could solve my problem, even if it was not a hardware problem.

• Firefox does NOT start, the removal and resettlement will start as the last step, but once Firefox is closed, it does NOT restart.

  Both browsers (Firefox 21 & IE) installed on my Widows XP 64-bit office refuse to start or click the icon on the desktop, the start menu bar or the executable files themselves. What happens is that all the icons disappear from the screen for 15-30 seconds, then the icons appear on the screen, and the last information message displayed from the system tray at the beginning upward is repeated.

  Firefox deleting and reinstalling will start the browser as the last step, but when the new copy is closed, it will not start. Also just restart the download installation without removing Firefox will be 'Upgrade' and start in last step, but when the new copy is closed, it cannot be restarted. Restore running on the new copy has apparent effect on the ultimate inability to restart after closing.

  I've only tried the Internet Explorer browser after being unable to start Firefox (its only usually used by States to update procedure) and have not studied either reinstall or repair.

  Did you use programs that I listed? All anti-malware programs to detect different things.

• HD will start another mbp, but not its own

  I asked this question earlier but with no resolution. Then I will try again but more simply asking.

  Here goes:

  I have a 2010 mbp that works very well. I have an another 2011 mbp which does not start. It is suspended on a progress bar of the half.

  Notes on the 2011:

  -hd has been cleared with a clear three-pass. New El Capitan installed.

  -new RAM chips from Crucial
  

  -safe mode does not start

  -verbose mode does not start

  -single-user mode does not start

  -utility mode does not start

  SATA cable - is not the issue. A good known was traded with no effect.

  * If removed from the computer, the drive 2011 will start the 2010 via usb.* *.

  From there, I ran disk on her utility (el capitan) and happens without any problem.

  
  

  A spanking new SSD has been installed inside the 2011 and does not start the 2011 under any mode.

  
  

  I think it is safe to assume that the SSD and HDD of 2011 are working very well.

  What could be another that I can test?

  Logic board failure?

  If the logic board, is there a test I can run using the 2010?

  Thanks in advance for any input on this head-scratcher...

  You better Genius Bar appointment to show the circumstances you are facing with now.

• Genuine Windows 7 on MacBook Pro running in the partition, BootCamp with VMware Fusion 3.1

  I'm having a problem with Windows 7 Ultimate 32 bit.

  I installed Windows 7 on my Bootcamp partition and until recently he worked well as well when I ran into VMWare Fusion.

  When I boot on my Windows 7 on Bootcamp partition, everything is OK.  But then when I run it in VMWare Fusion it says that my copy is not genuine.

  I just went through the automated phone system and entered the codes, and so now while I'm running Fusion Windows is genuine.

  I fear, however, that when I return to the execution of the partition, Bootcamp, Windows will say that is not true, once again.

  Only, I have a copy of Windows 7 and can only run from the VMWare Fusion or Bootcamp partition at any time.

  How can I fix it if Windows is more said that it is not authentic, when I switch from a training camp and VMWare Fusion?

  I need to be able to run Windows while I'm on the side of Mac at the same time

  Any help would be greatly appreciated.

  If you used the same Windows Installer Bootcamp, VMWare Fusion product key, there is the question.  You can only install and activate a 1 license of Windows 7.  The second installation requires own license that you can buy on the Microsoft Store. Carey Frisch

• When I Boot from my USB key to install Windows XP, it will appear not ALL my partitions to install on... Help!

  Yo yet another problem here: S recently, I copied files XP on USB and all that stuff etc... It will start fine after changing the order of boot on USB but when it asks me which partition to install on, it will say "PARTITION1 - LGUSB (3742MB)"... that's all for me, he said, even after making a new partition called "Windows XP Pro"... any help would be appreciated and I thank you guys for help :) especially when I only just registered to MS Answers... Thank you again :)

  -Program used to copy files from the installer:
  WinToFlash (New Version, beta version)
  ------------------------------------------------------------------USB Used:
  Unknown model - LG USB Flash Drive 4 GB
  -----------------------------------------------------------------
  Computer:
  Acer Aspire One D257

  Your User Guide can be downloaded here:

  http://global-download.Acer.com/GDFiles/document/generic%20UG/generic%20UG_Acer_1.0_A_A.zip?acerid=634394037714025697&STEP1=NetBook&Step2=aspire%20ONE&step3=AOD257&OS=all&LC=en&BC=Acer&SC=PA_7
  Once you unpack, you will have your User Guide:
  GUG_ACER_1.0_ALL_AOD257.PDF
  As you can see, there are different ways to restore your Acer. Yes, one of them involves a USB key. Please indicate what method you use.
  Note it is also a method where you would press Alt + F10 at startup (before Windows has the ability to load) to access the partition of the hard drive recovery.
  Yet once, have backed up all your data?

• Two Partitions of BootCamp, cannot start second of two.

  I created manually two partitions Bootcamp as each boot fine using BootCamp. The images have already worked as unique BootCamp partitions.

  Windows 8.1 is on/dev/disk4s2, Windows 7 x 64 on ./dev/disk4/s3

  When I create an automatic configuration of BootCamp, it built a virtual machine with two partitions of/dev/disk4s2 Startup - Windows 8

  I have reproduced the configurations, but created new disks:

  Create the Fusion.app/Contents/Library/vmware-rawdiskCreator applications/VMware\ $ / dev/disk4 3 ide BootCamp7

  Create the Fusion.app/Contents/Library/vmware-rawdiskCreator applications/VMware\ $ / dev/disk4 2 BootCamp8 ide

  I then removed the old files vmdk and pt-vmdk beams, added these and edited the VMX to reflect the name change. The discs appear correctly in the GUI.

  The configuration of Windows 8 on slice 2 boots fine, but Windows 7 on unit 3 eventually try to boot from the network with a boot disk not found. The BIOS is configured correctly and sees the drive. Settings is configured to boot from the hard drive.

  What Miss me?

  -Harald

  Just realized it as legacy boot. Only a SINGLE boot partition 'Active' for Windows by drive.

  It's bee too long...

• Re-partitioned Boot Camp does not not on VMware Fusion

  Hi, I had windows xp installed on boot camp and installed on vmware fusion, that worked well, but then I decided I wanted more memory and have vista instead. Installed on boot camp, but when I click on the partition boot camp on vmware fusion it still considers that I want the xp windows and says that the files have been move or restricted access or check for lack of files failed. Can anyone help, I tried to reinstall vmware, but the same result came out.

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• HI, Firefox will show my hotmail, but won't let me read what Ron thank you just started

  Firefox will open my hotmail, but when I click on it to read it does not open

  Hello

  You can try now erase the Cache, Cookiesand Site preferences with time to clear everything via Tools (Alt + T) the value > clear recent history after logout and then check.

  If the problem persists, you can reset Firefox and start over.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• SPA-3102 PSTN idle status, will not answer but watch sounds.

  Greetings,

  I am a complete newbie in the world of voip. I have an spa3102 and a computer virtual trixbox. When I use my softphone to compose, it makes to the spa3102 (shows the id of the last and gives a status of the appellant voip 'reply') but I get an "all circuits are busy now" and does not change the status of IDLE pstn. It also will not answer the phone for incoming calls to the PSTN.

  Outgoing stuff could be a problem of numbering plan (don't know not just guessing) here it is:

  (S0:xx. <@gw0>)

  I tried the regular (or default) (xx).

  incoming calls are supposed to go to a handset on my desk, for example ext 101 is the dial plan: (S0:101@internalip)

  I can't see the forest for the trees. Can someone give me some advice on where to look. I'm completely puzzled by something non-response externally, and why I get a all circuits are busy if there are inactive on the status page.

  an interesting note: If line1 is connected to an analog phone, it will dial a number, but always shows failover for a reason any...

  Thank you very much!!!

  Greetings!

  Thanks for the reply. I do not know if I explained properly (sounds like I don't have). I have a trixbox and I use the SPA in interface with my RTC and I want to have a fax machine (but later) on the FXS port. The problem I have is that I could not field calls to the collection. They would just ring and ring. I thought it was a dial plan (and hope it was not a hardware problem), but he just wouldn't answer the phone. He would show 'Ringing' like the PSTN status, but Voip would be "IDLE". I've been pouring through the guide of the administrator, forum messages for about 2 weeks now.

  But I didn't know what the problem was. The spa3102 is waiting until she can establish a connection (with the internal phone system) until it meets the PSTN. This is why it continues to ring. The problem why it shows it is inactive and (even with enabled full logging to a syslog box) no traffic to SIP the trixbox internal... because I had the port internal plugged in... not the WAN port (or internet). Thats right... silly me...

  I gave the wan port an address on the same subnet and moved the cable to it, once I could talk to her I change address internal to something even not on my network (if no routing problem) and left the network adapter disconnected (internal nic). Then I changed the wan to the old internal address address (trix trunk was already configured in this ip address anyway...) and PRESTO! I tried calling the number RTC and started to receive log entries showing the sip signaling and he's trying to route the call to the box of trix. It works now! So he was not answering the phone in my case, because it could not connect to the pbx or the ip phone and that because I don't use the WAN/INTERNET port on my SPA. Something I don't remember seeing in the textbooks as a "hafto' or a 'must '... I might have forgotten that of course, but I don't remember seeing him there.

  So if you enable logging, and then call this number (I used the PuTTY and 'tail-f /var/log/spa3102.log"to see the entries that they light up the box of syslog) and you don't see any sip traffic, it could be that you must use the WAN/INTERNET port instead of the internal port apparently logical... BE sure THAT ENABLE YOU REMOTE ADMIN if you decide to give it a shot.

  Also you can do the spa to answer the phone, even if it has no where to send the call (or if you want incoming people to use a PIN) on the GATEWAY PSTN - VOIP, there is a setting "off hook during the VOIP call" (default = no), but change that Yes - he would answer... and then sit there... If I had a PIN with a dial plan that is associated with this would give a fast busy after the entry of the PIN. BUT now everything is cool!

  Thank you!

• Vista will not start even in mode without failure or will start up repair help

  Hello everyone,

  I've been many problems with my OS recently (Vista 32 bit business) and decided to reinstall (it was really a last resort). The relocation went well, but in the end, he got the black screen with the extended cursor and didn't budge (I left it overnight).

  I forced to restart at the end of the day, and now it won't start, it just says loading windows and displays the logo of loading, but will not charge.

  Safe mode will start to load the drivers, but then freeze, leaving a permanent list of drivers and a "Please wait".

  I tried to boot from the Vista startup disk, who works the Startup Repair very well and running. The first time, he said he found problems with the boot files automatically and then asks me to click on "repair and restart. Once I do, nothing changes, it's always the same.

  I tried to run a further startup repair, but it does nothing, just scans and scans and scans... but can't find anything in the newspaper (it is not passed the crawl log entry).

  I can access the features on the disc to start very well, so I ran guest and drive a DSKCHK (read-only), but again it froze in the third part.

  As far as I know all my hardware works fine, and a diagnostic scanning don't tell something abnormal.

  ... any ideas?

  Enjoy your time,

  Chris.

  Hi Chris,

  This resembles the faulty Ram or a hard drive does not properly, even if the systems on board diagnosis cannot capture an error!

  Of what you sayed I recon, it is a hard drive error more defective ram, try rerunning DSKCHK and see if it stops on part III, once again, if the fact, its probably your hard drive! Maybe someone else has a similar thought?

  Hope this helps with your problem.

  Jon

• Since then he move to Windows 7 pro, the shared link will open the program, but the database is not up to date.

  I have a .net programming when it was on XP pro it worked fine. Since moving to Windows 7 pro the shared link will open the program, but information is not updated, because it seems that she has created its own database with information from the local computer is installed on and is not matching the information. For example, if the local computer is mapped machine upon receipt #25 is the #15 and should be on #26 and showing all the other receipt printed by the local machine. but its starts from where it was stopped 2 days ago, and is not followed.

  OT: .mdb problem with WIN 7 pro

  Thanks for all the help, I need it!

  Hello

  The question you posted would be better suited to Windows 7 IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads