Partition of several source BSO cubes to a single target ASO cube

Similar Questions

• Several Sources of data in a single logical table

  I'm new to OBIEE and I encountered a problem. I apologize if this information is in the forum somewhere, but I've searched and can't find it.
  
  My situation is that I would have a logical table that contains multiple sources of data, which all have the same columns. I already have the configuration of session variables to differentiate the security of the user through the variable for a specific column and a session variable to another column that determines the association of the user with the data source to which they belong to. This security works well when the data sources are separated in the business model and mapping party, but the question that arises is that the user cannot share reports when data sources are separated in the BM & M.
  
  I slipped and fell on a table in the physical model to the BM & M, I dragged then the second source of data (with the same meta data structure) on the "Sources" folder in the first data source table into the BM & M. on the content tab or each table data source, I've defined as WHERE clause where VALUEOF (NQ_SESSION. ("" SCHOOL session variable ") is my filter in the column and VALUE (NQ_SESSION. ("" GROUP filter ') is my critical data source:
  
  sandbox. ». SANDBOX. OBIEE_CROSS_ENROLLMENTS. HOME_SCHOOL = VALUEOF (NQ_SESSION. ("" SCHOOL ") AND sandbox. » ». SANDBOX. OBIEE_CROSS_ENROLLMENTS. DATA_SOURCE = VALUEOF (NQ_SESSION. "" GROUP")"
  
  Unfortunately that returns the values in the BI responses for the first drag and drop material table in the BM & M layer and not the second drug physical table in the folder 'Sources '. I also tried to create a new logical table and drag two tables in the "Sources" folder without success. I have experimented with the Fragmentation in the tab "Content" of the separate logical tables, checking the "this source must be combined with other sources at this level", which gives me an error in the responses of BI that there is no such thing as a column which has really.
  
  What might be missing? Thank you in advance to those who respond.
  
  Thank you
  
  Kyle

  Do not check the box "this source must be combined with other sources at this level", otherwise, it will always take the first logical table source. If you need to get rid of the error message. Are you sure that you have mapped all the columns on every logical table source?

  Maybe this article helps you to:
  http://www.rittmanmead.com/2007/06/19/OBIEE-data-modeling-tips-2-fragmentation/

  Kind regards
  Stijn

• For each field of the single target field mapping Source

  Hello

  New on BPEL 11 g and was looking for suggestions if I could use transform map to squeeze a bunch of source text fields in a single target field?

  For example

  XML source

  < name >

  XYZ < name > < / name >

  ERF < name > < / name >

  < name > As < / name >

  < / name >

  Target XML

  < name > Xyz; ERF; llmg < / name >

  Or I have to go to the help for each activity and allows the same Assign activity?

  Thank you.

  Hello

  Don't need a loop, string-join(/Names/Name,';') Xpath function returns Xyz; ERF; llmg...

  See you soon,.

  Vlad

• Need help with loading BSO cube with several data export files using the Regional service

  Hello
  
  We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.
  
  How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.
  
  I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?
  
  Please suggest.

  As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

• Partition member in source and target must be the same

  Hello gurus, I have a cube with partitions and each partition is to have about 10 dimensions.

  A dimension, I became a member and wrote a rule for this member in the partition of the source, I have to take the same Member in the score target to write the rule.

  No, you don't have to have the same set of members on both sides.

  If you have...

  A, B, C, D

  .. .in the source, and...

  A, B, C

  .. .in the target, you have two options.

  First option, live with the warnings of validation "incompatibility of cell count" and do nothing to do.  Then no data will appear in the target for had 'and had data' will be not only be pushed in any of the partition.

  Second option, card would be "one of the 'A', 'B' and 'C'."

• Impossible to enter data to Parent - Essbase BSO Cube level member

  Hello
  
  I'm unable to enter data on the form in line against a member parent in the entity dimension. The Web form gets classified off when I select the parent member (level 1) level enter store information of text (from the account Dimension)
  
  So my selection of page elements is the entity dimension and my lines are account codes (account dimension) and the column is a dimension of the year. I can enter and save data on the selection of the level 0 member, but when I select its parent, cells member is listed on.
  
  I understand that it is not advisable to enter data at zero level members. Users would still like to store textual information about the parent member. According to my understanding, BSO Cubes should allow us to enter data into the zero-level member.
  
  Kindly advice.
  
  Thank you
  
  Thomas
  
  Cube Essbase BSO
  Dimension feature - Sparse - element of the Web Form Page
  Account the Dimension - as always Dense - rows on the Web Form
  Year Dimension - Sparse - column on the Web form

  Yes, "Ascending" you cannot enter data at a higher level. You must do as a target version, then you can enter any level of data.
  You can also create several versions and make any version as 'target' version and enter the data for the target version.

• Error handling in QMH projects with several sources of error

  Hi guys,.

  I have a head scratcher:

  QMH architecture, I have a state machine that describes a certain task of legislation on different instruments.

  Each of these instruments has its own message loop vi management and each of these loops could cause errors.

  I want to pass these errors to the state machine (VI main if you want) in order to take appropriate action or - at least - inform the user what the error instrument came. Currently, I use a global variable for each error source and merge errors in primary VI.

  Problem: Multiple errors, only the one connected to the first entry of the fusion VI errors is displayed.

  What is the best way to get errors from several sources to level superior screw and keep all the error information for debugging purposes?

  Thank you!

  
  

• How to query and make general dashboards with BSO cubes

  Hello community,

  Does anyone have the General information on how to make dashboards and repository with bso cubes. We did some dashboards with a few cubes of aso, but we know not even how do data appear in an analysis with bso cubes. We really don't know a lot about the difference between these types of cubes. Help demo or resources would be appreciated.

  Thank you!

  Hello

  If you have managed to do with a cube ASO just do the same.

  The ASO or OSB cubes in the end are cubes...

  The different main, that's how you build your cubes as they probably contains different things with different structures.

  Remember that ASO cubic automagically total when you query it, a BSO cube does almost nothing in itself, so if you don't calculate it you have generally not all aggregates, etc.

  If you failed to get the data of your OSB the question is probably more your cube itself: there data? is it calculated? (if you are using SmartView you something?) you model right? etc.

• If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds?

  Hello

  If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds? Or is it keep held locked blocks even after aggregation for this block is over?

  For example if I correct sparse dimensions Forecast, FY15, dec.  and my accounts dimension is only dense, after calc has my senior level members in the accounts, it it will issue after updating (i.e. in fractions of seconds) or is agg keep it held in a lock?

  I ask because I want to run scripts tot., but there is the update of our cube users.  I never had a problem to start agg, while users are updating.  But maybe I am lucky.  If a user updates a closed block, they will receive an error message that I think.  They may try to update again after a few seconds, I hope.

  Thank you.

  Locking behavior for BSO Essbase is described in the database administrator's Guide: http://docs.oracle.com/cd/E57185_01/epm.1112/essbase_db/dstinteg.html

  It is certainly theoretically possible that a user can obtain a lock because of a calc, although I can't say I saw him be a problem in real-world applications (perhaps because access uncommitted is the default).

• How to change the 'Drive' for the BSO cubes (just like we do using "alter tablespace" for ASO cubes) using MAXL etc.?

  Hello team,

  I'm trying to make a backup copy of the cube by using the copy commands, BSO

  but after copy, I need to change the drive letter (for the data and indexes of the files) using MAXLs.

  I am able to do for cubes ASO using "Alter tablespace" i.e. for example, change "D:\" car ' to 'E:\. "for the tablespace files.

  I need to do the same for the BSO cubes? any idea?

  Kind regards

  Amit

  Don't forget while you can also change the drive it can't displace data. You would have to export the data, delete the database, change the disks, and then reload.

  For the actual command of MaxL watch the MaxL Alter Database command. You can add, dorp or set volumes of disk for ind and pag files

• Can drag you several sources to a target?

  Hello

  I am using Captivate 8 and I have a drag and drop the whole upward. Can drag you several sources (correct answers) in a target? Or each source must have its own target?

  Thank you

  Kristen

  Yes, you can. Check out the demos here by Jennifer Dr.Pooja.

  Adobe Captivate help | Drag-and-drop interaction

  Anthony

• A tutorial / sample to create a single PDF of several source files using assembler PDF in a process of control folder.

  A tutorial / sample to create a single PDF of several source files using assembler PDF in a process of control folder. I have a client application that will prepare the number of source files and metadata information (in. (XML) that will be used in the header/footer. Is it possible to set a run time generated shows the DDX file in the folder and use it in the process. If possible how can I pass the file names in the DDX. Any sample process will be very useful.

  If possible, make use of the API of the assembler in your client application instead of doing this using watched folder. Here are examples of the assembler: LiveCycle ES2.5 * programming with LiveCycle ES2.5

  The record can accept zip files (example: configuration of a control folder to manage several input files and write the results to a single folder |) Adobe LiveCycle Blog ). You can also use run the script to create the DDX when executing: LiveCycle ES2 * Application Development using LiveCycle Workbench ES2

  Thank you

  Wasil

• BSO to the conversion of the ASO - helps the formula of Member

  We have a BSO cube and it is converted to ASO. The account dimension has the attribute SOLDETEMPS properties, and therefore the time dimension cannot assign to either dynamic or multiple hierarchies because of which I'm not able to define formulas for Member in the time dimension to ASO, this requires the dimension to be either dynamic or more hierarchies to have member formulas. MDX scripts is the way to go I'm not very familiar with the scripts, MDX and its use. Please advise and also I would like to know if there is another way to solve this problem.

  do not use the properties of balance.

  You will need to take the time to be dynamic, created shared hierarchy similar to

  FOR A YEAR
  Jan shared
  Feb shared
  ......

  Then mark up your TB accounts with udas as TBFirst, TBLast, TBAverage.

  You have two options where you can join the MDX formula of time CDA/QTD or attach the MDX formulas to members of the account saying IIF YTD then make first/last/moy.

  You can choose between the two, if you have less number of accounts of TB, so I would say that set the formula to members as well as other members can obtain the value of CDA Member rolls.

  Concerning

  Celvin

  http://www.orahyplabs.com

  Please check the answers as useful/correct as appropriate

• Clip of MultiCam, but with audio from SEVERAL sources at the same time?

  I recorded a seminar using several audio and video sources. Audio sources include a wire tie, room microphone and read directly from a computer.

  I got all the raw materials imported into FCPX and created a multicam clip, and everything is synchronized perfectly.

  For the video, I know how to make the cut between my different cameras.

  But for audio, I would be able to play several audio channels at once - namely, lapel mic and the mic to the audience. How can I do this?

  I know I could put the multicam audio clip: setback (for example) then also drag the microphone to the audience for the game. But that means every time I make an edit, I have to make it through two sources and must be absolutely sure that they fall never out of sync.

  I guess I could drag the multicam clip in the timeline twice (one above the other, so two are playing simultaneously), with a video source set to none. But the same problem - I always have to be very careful with the changes, two parallel versions never move out of sync.

  Is there a better way to do it?

  There are also sometimes I can do some automation of the volume of the different channels... so everything what you are proposing, please keep this in mind.

  Thank you!

  In fact with a multicam clip you need not "stuff" to work with multiple audio. It has excellent support directly in the application.

  See Steve Martin explain this: https://www.youtube.com/watch?v=HE4FRDMJBS0

• EPMA Essbase BSO cube with text measures

  Hello world
  I use Oracle EPM 11.1.2.2
  I'm trying to deploy a cube essbase BSO with EPMA text measures. The list of text EPMA must be created as a smartlist dimension. I even kept the Member account with the data type text as the first member of the level 0 of the account hierarchy.
  When deployment I'm gettting no error. In environmental assessments when I see the property of the Member, it shows as text, and also with the list of text attached to it. But when I insert data, data gets too loaded and gives no error.
  
  But when am through Smart View data display or HFR, the data are displayed as numbers and not as text.
  
  Kindly help.
  
  Kind regards
  SS

  Hello

  We met the same problem.
  Try the same essbase outline in cube Epma no if it works, then update at the request of EPMA and then deploy it and check again if this works.

  Thank you