Partitioned my drive, appearing as 99.99 GB 100 GB not like its supposed to

Similar Questions

• New hard drive appeared in 'My Computer' but cannot access

  A few days ago, I discovered a "new" drive appears in my computer. He pointed to (e), but Windows can't read at all. If I click on it, a message saying "you must format the disk in E: drive until you can use it. You want to format? »

  So, when I click on cancel, do not format, the message says "E:\ is not accessible. The volume does not contain a recognized file system... "etc.

  If I right click on the drive properties and view, Windows reports the drive as having a capacity of 0 bytes.

  I think that there is a partition that was previously hidden and has of recovering files or bios, put there by the manufacturer of the computer.

  I would get hidden once again, because not only it is an annoyance, but his presence changed all designations of drive letter of my external devices (i.e., a flash used to be "G:" drive is now "H:" and etc. for other devices). It is a problem for programs looking for specific readers and shortcuts.

  As a note, I have MiniTool Partition Wizard Home Edition, for the management of the partitions. But for some reason, the option to hide this particular drive is "grayed out" and not selectable. But at least the program is able to tell me that the drive is primary and that it has met its capacity of 15.69 MB.

  Is there a way I can hide it again and restore my drive letter designations already?

  My computer is a netbook Asus eee pc 1005HA. Thanks in advance for any help!

  CrimsonRaccoon,

  Select "letter of change of road and railways.

  You will find now 3 buttons: Add, modify, delete.

  It is to remove it, I want to talk.

  :)

  Carlos

• diving USB hard drive appears on the Control Panel, but not on MY computer

  Drive hard USB part on the Contrlol Panel but not on my computer.

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  (a) what is the brand and model number. the USB HDD?

  (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

  (c) that you get an unrecognized USB device notification error message?

  The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

  in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows

  
  

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  If the problem persists, try the following method.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and perform a test to ensure that the problem is solved

  Also, refer to:

  Updated a hardware driver that is not working properly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• drive appears as a drive system, but it is not. I deleted and created a new O drive, but Windows 7 backup insists that it is a system drive!

  drive appears as a drive system, but it is not. I deleted and created a new O drive, but Windows 7 backup insists that it is a system drive!

  Hello

  Backup to a different partition on the same drive is not recommended and the car fails, you will not be able to retrieve or use the backup.

• Why two local drives appear on my PC if I have one?

  Why two local drives appear on my PC if I have one?

  It seems to be the partition of 100 MB of the system default, but she appears on 'My PC' or 'computer '...
  I leave it there or what should I do?
  Thanks to all for the replies! :)

  The 100 MB System Partition is created by Windows 7 during installation and it is usually hidden in almost all cases. What might have happened in your computer, it is that, somehow, a drive letter has been assigned to that partition, and this is why it is displayed in the window of your computer. You can delete the associated with the System Partition drive letter on your computer to make this new hidden partition. You must not remove or make changes within this partition, it will leave your computer in the absence of priming.

  To remove the drive letter of the System Partition:

  1. click on Start, type diskmgmt.msc in the search box and press ENTER to open the disk management window.
  2. right click on the partition system booked about 100 MB of size in question and then click change drive letters or paths.
  Note: Be careful here, do not make any changes to the drive letter assigned to the other partitions in the computer, which would be a disaster.
  3. then in the pop box - next up, Select the drive letter assigned to the partition, and then click Remove.
  4. There will be a couple of guests you say that if you remove the drive letter, some programs that rely on drive letter may stop working, you can safely accept these guests. Once you are done by clicking OK in these pop-ups, close all open windows and restart the computer.

  You shouldn't see that partition in the window of the computer now. It will be useful.

• An error occurred when to partition the drive

  I have a MBP 2012 retina end 13 "El Capitan 10.11.6

  The hard drive in the machine is swapped with Transcend SSD of retinaTRIM is not enabled.

  I'm trying to install 10 Windows using Boot Camp, and I get this error.

  An error occurred when to partition the drive

  Your drive cannot be partitioned.

  I've tried-

  • reset the PRAM,
  • First aid running in the desktop utility and
  • running/sbin/fsck - AF in single user Mode.

  Nothing has worked.

  Any help is greatly appreciated.

  Maybe you have not enough contiguous free space to create the partition.

• Messed up installing bootcamp. Help restore the partition of drive of Fusion.

  Hey, guys and girls. My install bootcamp froze. Now, my Fusion 3 TB drive is only show 756.3Gig. I was in recovery and tried to repair the disk. But, the remaining space is not displayed. How can I reconfigure the disk to show? Of course, I want to partition the drive bootcamp. Thank you!

  See below for my drive configuration:

  

  I have the same problem, I partitioned my drive of bootcamp and something went wrong with the installation, now I can't access it. It's not even show in the utility disk or startup disk.

• Can I partition a drive hard once Windows XP Professional is installed

  I will get a new computer with XP installed on a 500 GB drive.  Is it possible to partition the drive in 100 and 400 GB so that I can move my data files on the second partition, and thus be able to restore the operating system if necessary without destroyin my data. I have a feeling that partitioning must be done before XP is installed, but I'm not sure.

  Thank you very much

  If you drag from left to right or right depends on if you want the unallocated space (where ira your new partition) before or after the partition, you are working on.  As a general rule, it is best to have the system partition (usually C) to near the beginning of the training (i.e. the left end) as possible.  Thus, drag the right edge of the C partition to the left.

  It's a bit difficult to describe without drawing but see if that helps-

  Suppose you have a 500 GB drive with a 500 GB C partition.  It will look like this:

  CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

  Now assume that the amount of "space used" is 80 GB.  The space that is used with "BOLD", your disc looks like this:

  CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

  Now, you want to create a new partition of 400 GB.  Call the E (because D is your CD player - but the letters can be changed later).  You must resize C to leave space unallocated after him (right).  To do this, drag the right end of the C partition to the left:

  CCCCCCCCCCCCUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU

  Now use the unallocated space and make your new partition

  CCCCCCCCCCCCEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

• Is it possible to partition my drive and back up my content to a single domain then selectively reinstall the original content?

  Partition HARD drive

  XP home - 26 used and 123 free Go - is possible to partition my drive and back up my content to a single domain and then selectively reinstall the original content - there is a problem with my operating system, a recent problem has been fixed by a tech reinstalling another version of XP, that I discovered in trying to repair, I have the original disc and I want to reinstall it on the partitioned space - I know that I can reformat and reinstall, but get all the programs and extras back can be a real problem, so would be grateful for the help please

  Use of third-party tools like Partition magic., etc., after installation, you will get the option to resize the disk.,.

• system recovery will not load a partitioned hard drive

  Hello

  My dell inspiron on vista Basic has been sluggish, so I made a few stop hard downs.  After this, windows will not start and repair windows will work (on the start menu).

  recovery system cannot read the partitioned recovery drive (backup).

  Sometimes the system will display unknown hardware error d000144

  my laptop is only 3 years.  never buy a dell again.

  New programs are malwarebytes and windows defender.

  Hello

  Here is the information of Dell for the use of their recovery Partition:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And how to use the Dell Diagnostics software, as appropriate test equipment, etc.:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/Setup.htm#1100569

  As the Dell recovery partition is a Dell product, for other questions, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or ask in the Forums of Dell Support:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Installation of a separate install Clean bootable your OS Vista on another partition or drive.

  Installation of a separate bootable 'Clean Install' of my Vista operating system on another partition or drive.

  I want to end up with two installations of my Vista operating system startup:

  1. a Vista bootable installation would be just the current which is functional and has many programs installed etc...

  2. the second installation of Vista would be another partition (another reader would be OK too). It would be a place clean, fresh install any program or data and not of parameters that would be present if it was the first Virgin installation.

  3 on boot-up, only two facilities operating system Vista would be active - one chosen by the user at boot time.

  Is this possible? What license issues/costs should apply?

  jwcrim

  2. install Vista requires 2 licenses of Vista.

  Microsoft sells more than Vista.

  For the price, check online: Newegg, Amazon, etc.

  Or try your local computer repair shop.

  See you soon.

  Mick Murphy - Microsoft partner

• Device driver appears

  The device driver does not display the title of DVD/CD Rom in the PC section.  The CD drive is not recognized by windows.  We tried the fix listed on Microsoft to remove the upper and lower filters, and it did not fix the problem.  Any other suggestions would be greatly appreciated.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• SSD Sata HARD drive appearing is not in the system of the device

  I added a SSD HDD to my system via a sata connection and I see the drive listed in the BIOS, but it does not appear in the "My computer" window I can't format it to use it.

  I also noticed when the bios runs at startup it flashes very quickly a message that his search for disks, then no drive detected...  Why not?

  Monday, December 27, 2010 22:08:30 + 0000, bitdman wrote:
   
  > I added an SSD HDD to my system via a sata connection and I see the drive listed in the BIOS, but it does not appear in the "My computer" window I can't format it to use it.
   
   
   
  Click on the round to start, type computer management in the area of research and
  Press ENTER.
   
  In the computer management window, select on the left disk management,
  Click on the drive in question and select format.
   
   

  Ken Blake (MS-MVP)

• How to clean install Windows 7 Professional 64 - bit of a GPT partitioned hard drive

  Hello

  I try to install Windows 7 Professional 64 - bit on a clean hard disk using the supplied DVD. I would use the formatting option GPT instead of MBR because of its capabilities on the MBR.

  I understand that I need a motherboard that supports UEFI and I made the necessary changes to start in UEFI since my motherboard.

  How can I specify when to start from the DVD, I want to have a GPT partitioned hard drive?

  Thanks for your help

  There is a quote in the following forum:

  http://windows7forums.com/Windows-7-installation-upgrade/5552-if-Windows-7-supports-GPT-why-cant-i-install-OS-GPT.html

  To install Windows 7 on TPG is simple; during the installation of windows 7 DVD and you get to the segment that you can create or delete partitions press "shift + F10" this will open a command prompt and use diskpart to convert to GPT

  How to use DiskPart to create a GPT formatted disk:

  HOW TO Use the .efi to Diskpart utility to create a GUID Partition releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I tried to create a partition on drive D, but did not have the letter D.

  * Original title: Windows 7 and D drive

  I tried to create a partition on drive D, (don't use it on my computer) through disk management, complete the Wizard but did not have the letter D. I'm curious to know why this is happening.

  It could belong to a shadow drive or Player cards on the machine. Simply use the next available letter...

  I thought that this might be the case, but I wasn't sure. I have software from our parent company in Asia and must be run on drive D, great pain. they want it distributed in North America, but our clients would not want this restriction. I try to explain the powers that they need to return to square one on this.

  I appreciate your comments.

  You can see the disk manager in Control Panel.  If there is a hidden D: drive, it will display here.  My guess is the drive letter is not assigned or assigned to the next letter somewhere down the line. If there is no D: drive you can assign the D: drive in there.   You can change the drive letters in there also.  give it a try.