Password appeared after update bios on R61

Similar Questions

• Re: Satellite M70 Bios password prompt after updating Bios

  I upgraded my bios M70 with one published in 18/11/2008. After completing the upgrade the computer turned off. I tried to start it but it asks password. I never put or used the bios password before. What is the solution?

  Hi guys

  First of all I must say that it s really strange question, but I've seen questions;

  What OS you have and what version of BIOS have you tried?

  Driver page provides a BIOS for Toshiba Europe * Vista only * (* 5.20 - WIN *) and other BIOS is * NOT * compatible with Vista OS (* 1, 60 - WIN *)!

  It would be interesting to know more details.

  Welcome them

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Password BIOS after update BIOS on Satellite A210-131

  I just bought this laptop and update its BIOS. After update done computer turns off automatically. Then I turn them on, it ask password, I've never given an any of them in the BIOS.
  What is the password?

  Hello Jhonson

  I don't know what the password is, but please call the service provider allowed in your country, and they will help you. They can remove the password and you can use your laptop model as before.

• Re: Satellite P850 sets a BIOS password after update BIOS 1.50

  Hi all

  I have a Satellite P850/040 and after the BIOS update to the new version 1.50 I checked that a BIOS password has been set up, if I can start the operating system.

  It's amazing. I am very disappointed with Toshiba.

  How can I remove this password? Perhaps with no matter what JCMOS rider?

  Thanks in advance.

  > How can I remove this password? Perhaps with no matter what JCMOS rider?
  Unfortunately, something like this will not work. Best thing you can do now is to contact the nearest Toshiba service provider and ask for help.

  You shouldn't be disappointed. I know it's stupid situation but make a call, explain the situation and the guy will help you.

  You will find the phone number?

• Satellite L300 - dead after update BIOS!

  Hello!
  I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

  Thanks in advance!

  Thom

  Hey Buddy,

  It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
  However, this forum can help you:
  www.theeldergeek.com/forum/index.php?showtopic=21209

• Qosmio F50 - bright/Fucntion keys do not work after update BIOS buttons

  OK... I read a similar post and has FACT EXACTLY what IT SAID TO DO... He solved half of the problem or less... after the update to the new bios that I'd like speed or make my Qosmio energy gave me problem from the first day I installed it...

  The reason why I upgraded to was I thought he could solve my problem of flash memory card. They NEVER APPEAR AFTER REBOOTT... I ALWAYS HAVE RESTART THEM IN THE WINDOWS MENU... I thought that if I do a scheduled task. This would solve the problem. Guess what... It SCREWED my windows calendar place... a mistake self-protection
  This brings me to install the new bios... After you install... He has created ONE MORE PROBLEM, INTOTAL - TWO
  (1) KEYS INFORMED DON'T WORK
  (2) FLASH CARDS DO NOT WORK
  After following the instructions of a thread posted here... He told me to remove the VAP and reinstall... Guess what... it solve the key problem... but MY KEYYYYYY FUNCTION... I restored my pc... He said if your function key is disabled... GUESS WHAAT AGAIN... THE FIRST PROBLEM TO... ILLUMINATED KEYS DO NOT WORK... I later discovered that I can't have both things at the same time according to the instructions... Oh Yes... I forgot to mention;... CARD FLASH showing... shut up has never shown... restoration takes me to the original problem...

  I think down my BIOS version that might solve the problem but can't find it... I don t want to restore because I might install additional software like the game... Assassin s creed... BTW... It works AMAAAZZZINNNN... but the multimedia and function keys keep on bugging me
  I have a Qosmio F50-126 with Vista 32 bit...

  Try:

  Reset the BIOS to its default settings.
  VAP to uninstall and install the latest version from the Toshiba site.

  PS I think you can change the lighting in the BIOS, have you checked this setting?

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• password changed after update

  computer, just update the BIOS and changed my password.this is password I use to get in my computer normally.miracle I worked on password he wanted but it isn't the one I use every day. turned computer and rebooted but he wanted even password.why he did this. Thank you

  Hi there @ruth46,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that after a BIOS update your system starts with a different password. I'm happy to help you with this.

  Is the password request you a specific BIOS password? If so, it is possible that with the update tweaks has been changed and activated BIOS security on start up.  In this case you should check your BIOS settings in particular security settings. You can remove or disable this password, or just look at the parameter allow its use on start up.

  If this is the case, rather a different password you talk, and then send the complete product and the operating system running on your computer. Check out the following, if you need assistance with this information.

  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite Pro L300: BSOD after updating BIOS

  Hello

  After updating the Bios of the Satellite Pro L300, windows will not start!
  His show the blue screen of death!

  What can I do?

  Hello

  You are able to access the BIOS settings?
  I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

  Usually the SATA mode must be on AHCI if the SATA drivers are installed.
  But if the SATA drivers are not included the SATA mode must be set to compatible.

  Please check this!

  In addition, you could set the BIOS default settings and may try to start the computer again.

• M92p Tiny - no bootable disc after update BIOS to 9SKT59A (dual boot Linux/Win7) GPT/EFI

  Hello

  I've updated my Lenovo ThinkCentre m92p tiny A1G 3237 - to the 9SKT59A of the BIOS version.
  I use a SSD OCZ with GRUB2 and Win7/Linux dualboot (UEFI/GPT) without any problem.

  After that the updated BIOS update it was SecureBoot activated and I couldn't start obviously GRUB2.

  Then I disabled SecureBoot and changed the boot order, but when I try to include the SSD with x, it disappears from the list excluded bootable devices but do not appear in the devices included.

  Now, I'm only able to boot using USB key where a grub2 is also installed. I'm sure it's a bug in the BIOS!

  Can anyone else confirm or solved this probem?

  See you soon

  Mijenix

  Updated the BIOS to 9sj960usa fixed the problem for me. As I was not able to boot using CD/USB-SSD, I was able to GRUB2 boot Win7 on a USB key and has used the flash .exe file.