Password of the BIOS/Power-On has stopped working

Similar Questions

• Power Manager has stopped working - BadImageFormatException - resolved

  Moderator note: there is no way to mark a simple/first post as "resolved." I moved from belgam sabermanat 2nd position so it can be tagged accordingly.

  Thanks for the report.

  Z.

  Tale of woe and recovery.

  I recently acquired an i7 ThinkPad x 201 with 8 GB of RAM and 500 GB drive

  I did a fresh install of WIndows 7 Ultimate x 64 with SP1

  I ran Windows Update and applied the fixes about 80 - all the critics and most of the other

  I downloaded the Lenovo system update and install everything except the BIOS updated as the current BIOS is identical to my other x 201 BIOS Version 1.37 (6QET67WW) - I prefer not to do an update of the BIOS, unless absolutely necessary.

  The Manager toolbar of power present in the taskbar, but I can't start to eat.  Or I can it starts application tools ThinkVantage or by pressing Fn - F3.

  Each of them immediately to bring up a Windows error dialog box that says Power Manager has stopped working.  The splash screen appear not at all.  The details are:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: pwmui.exe
  Signature of the problem 02: 1.0.0.0
  Signature of the problem 03: 4f626f8a
  Signature of the problem 04: PWMUI
  Signature of the problem 05: 1.0.0.0
  Signature of the 06 problem: 4f626f8a
  Signature of the 07:378 problem
  Signature of the 08:0 problem
  Signature of the problem 09: System.BadImageFormatException
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  The Version of the file is the same as my other x 201 (1.0.0.0), but the closing date is Thursday, March 15, 2012 02:53:40 while on my other machine is October 3, 2011 23:01:27.  The update is also 15/03/2012 whereas the other machine is 04/10/2011.  It seems that Lenovo rebuilt the package in March 2012.  Manager supply on the other machine says it's 3.64.  The Lenovo site (http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432#power) lists 3.64 but when you go to the download page it says it's 6.07.  I tried to uninstall Power Manager and install the 3.64 one from the download site.  The same problem.  Finally, I uninstalled the power manager and installed the 3.40 version I downloaded when I got to the other machine.

  So, how Lenovo released a package with a picture of the wrong file?

• "Power Manager has stopped working" on Win7 X120e

  Operating system: Win7 (mainly so far)

  BIOS version: 1.17

  Power man: 6.45

  When you click on the taskbar icon, Power Manager will not open, which gives "Power Manager has stopped working". This has been the case for quite a while and I have struggled to find someone with the same problem that could signal a problem.

  I tried to uninstall and install most of the versions of the Manager of power until later. I have the latest version of the BIOS of the machine and Win7 is the most up-to-date (except for the most recent updates).

  I would like to be able to handle the power supply via the Power Manager options. Any ideas?

  Thank you, very much appreciated.

  It turns out, after much more research, than the .net framework necessary updated. Windows Update sorts basically this - could do with some official documents on that?

  So a simple fix in the end.

• I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

  When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

  I suggest to see if there are updates or new versions available for IncrediMail.

  If still no luck, I suggest to ask the support of IncrediMail

  I hope this helps.

  See you soon,.

  J

  

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

  I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

  Hello

  as you have problems with the Dell software, contact Dell

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  or ask in the Forums of Dell Support

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

  I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

  Hello

  Contact HP support because it is their software problem

  http://welcome.HP.com/country/us/en/contact_us.html

  or ask in the Forums of HP Support

  http://h30434.www3.HP.com/

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.

  It comes with Vista, upgrade install and activate Forum.

  Try in Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon. Mick Murphy - Microsoft partner

• Replacement for the preview handler host has stopped working

  When creating a shortcut which connect to the network share. It can connect to get the file and it will have the following error message:

  Replacement for the preview handler host has stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: prevhost.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc5ca
  Fault Module name: hooknt.dll
  Fault Module Version: 1.52.0.0
  Timestamp of Module error: 49a 20833
  Exception code: c0000005
  Exception offset: 0000b 951
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 3081
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Does anyone know how to avoid it?

  Hi Ivan 2008,

  You can try the network drive mapping & check if it helps.

  Create a shortcut to (map) a network drive

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.