Patching ACS 3.2 due to HTML security patch

Similar Questions

• Cannot open these files due to internet security settings blocks. Help!

  Whenever I'm looking for something in my menu start a few days ago, I get this:

  And whenever I try to open one of these files, it is said that they can not be opened due to Internet security, I have reset the settings of Internet Explorer and still nothing happened. I don't know what to do and it does not affect other programs as I can not open them no more. I scanned the computer several times using windows defender and other Antivirus software removed all viruses and it is still not affected.

  Hi Khaled,

  Thanks for posting your query in Microsoft Community.

  a. don't you make changes to the computer before this problem?

  b. What is the exact error message you get?

  Usually, this happens because of misconfigured Internet Explorer security settings. Reset Internet Explorer usually solves the problem. However, as you have already tried these steps, I suggest you to try the following methods and check if the problem persists.

  Method 1:

  Run the Internet Explorer performance Troubleshooter and check if it helps. It checks for common issues, such as whether you have enough space on your hard drive to store temporary Internet files.

  Open the troubleshooting Internet Explorer Performance Troubleshooter by clicking the Start button , and then clicking Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click Internet Explorer Performance.

  Method 2.
  If the problem persists, I suggest that you temporarily disable the Windows Firewall and disable the firewall in the anti-virus software if you have installed on the computer and then check the issue.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Boot the system in cleaning mode and eliminate defective service causing the issue.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Unable to set IMAP account due to invalid security certificate - error 4010

  Hello I just got a new TouchPad and have updated the OS to the latest version. I try to set up multiple e-mail accounts and am having a problem with an IMAP account. I already put in place two POP accounts without any problems. But when I tried to set up a connection to the account of my work (IMAP) I wasn't able to do. He told me that the security certificate is not valid with the 4010 error.

  I did some research on the Board of Directors and have tried the following:

  (1) used the web browser to sign on my webmail from work, he complained the untrusted certificate and I said to add the exception and TouchPad Certificate Manager confirmed the certificate (webmail.myworkplace.com). This did not help the e-mail client.

  (2) someone suggests to send the certificate by e-mail attachment and open it. So, I exported the certificate through firefox (as X.509 - PEM certificate) to the POP account that I had put in place. The mail reader didn't know what to do with this attachment and will not open it. I renamed the file in .txt and the mail reader just showed me the text content. So no luck there.

  I have an iPod touch and I had no problem whether to set up my account to work with the native mail on this device reader and I do not know why the TouchPad also gives me a hard time.

  I'd appreciate any help in this. Thank you.

  Zippy1970 wrote:

  Just a friendly reminder that I'm still unable to setup email on my TouchPad due to error message...

  Hi Zippy1970,

  Sorry, that took me so long. I ended up having to install openssl in order to display the certificate, but once I did, the issue jumped immediately.

  There are 2 problems with your certificate

  1. It is self-signed (this isn't a problem, there's just one additional configuration step involved)
  2. He was assigned to the wrong domain. Right now, the certificate is awarded to "localhost". This is not the area in which your TouchPad uses to connect to the server that is why he makes the mistake of certificate

  To make this work, you need to create a self-signed certificate that uses the correct domain name (the CN value must be the same domain name that you have sent me in private message).

  Also, you need to add this certificate to your TouchPad (because it is self-signed). The last part is pretty easy, just copy the certificate file on the touch pad using USB drive mode, and then open the Certificate Manager and the new certificate. To access the Certificate Manager:

  • Info on the open unit
  • In the main Menu on the left, select Certificate Manager
  • Press the Add button
  • Select your certificate

  Once this is done, everything should work for you.

• 11.1.1.7.1 book - Agent creation/modification impossible due to WLS security problem

  Hi all

  Only, I came across a villain on 11.1.1.7.1 where the creation/modification of the Agents has become impossible due to the suspended GUI completely and become unresponsive.

  It doesn't happen in the configurations with several suppliers of safety in the field of security WLS (virtualize = true of course, works of auth/allow normal).

  The IUG offer (managing agents), as soon as a getUserPopulationAccount single HTTP Post request is sent, hang GUI and the POST request error after 120 seconds

  OBIPS11bTtKewWE / + A0

  {t:6, "fatal": true} bTtKewWE / + A0 {"msg": "Error retrieving data from the user/group of Oracle BI Server\u0027s user Population API."}

  "related": [{"msg": "Driver Odbc returns an error (SQLExecDirectW).", "related": [{"msg": "State: HY000."}]}]  Code: 10058.

  [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. \n [nQSError: 43113] Message returned by OBIS. \n

  An error message was received by BI Security Service: an error message was received by BI Security Service:

  [nQSError: 46169] A HTTP 1.1.1.1:6666 operation has expired after 120 seconds. Abandoned operation. (HY000) ","bound ":

  [null]}, {"msg": "SQL issued: {call NQSSearchIdentities (\u0027USERS\u0027,\u0027NAME_PATTERN=weblogic*\u0027)}", "related": "}

  {[{[[null]}, null]}, null]}

  I suspect this is related to the question known to manage entities of type user during posting Membership Application role in company management. Seems that there is something very rotten...

  I raised an SR for this, but not too positive in what respect what to expect an answer...

  Note that I'll be switching this on the site of communities both Oracle!

  Any ideas / tricks / rants?

  Solved. A new property must be added to the EM security provider configuration:

  Name property = PROPERTY_ATTRIBUTE_MAPPING
  Value = DISPLAY_NAME = uid

  (where uid = the GUID of your LDAP in question).
  Unfortunately, only mentioned in SRs and not in the official doc with an explanation where this property (against all odds) comes from and why all of a sudden need.

  See you soon!

• Today my email yahoo via thunderbird refuses to send e-mails due to the security exception box saying yahoo security certificate has expired. What should I do?

  It is incidents # 140604-031419. As of this morning I could not send emails to yahoo in Thunderbird. Instead a box of security exception appears, saying: "you are about to replace how Thunderbird identifies this site. Legitimate banks, shops and other sites public would ask you not to do. This site tries to identify with the invalid information. Outdated information. Certificate is not currently in force. It is impossible to check whether this identity has been reported lost or stolen.

  After clicking on 'Show', I realized the so-called security smtp.mail.yahoo.com certificate had expired today, 4 June 2014. Is it possible yahoo forgot to renew the certificate (obviously really happened in 2008)?

  How can I start sending emails through this account again without compromising safety?

  Yahoo has screwed up. It's for you to decide if she is sure to make an exception and send the message anyway or wait until they fix the cert.

  You can use webmail to work around the problem, however.

  Not that it makes feel you better, but you're not alone.
  https://answers.Yahoo.com/question/index?QID=20140604112909AAwFdLO

• SE message which, due to the security I have to save the citrix .ica file to the location on the computer, and then double-click it to open.

  I just put on my computer citrix.  I need to work, I get all my apps to work through it.  When I try to open one of the citrix apps is telling me to save it to my computer, then double-click it to open it because of my security settings.  I tried and it won't do anything, that it gives me just the option for approximately 10 seconds for first save and then closes this window.  I can't work if I can't get these apps to open HELP for me!  Thank you.

  Go to the following site to see if you can download the customer Citirix Metaframe. I think that your problem should be solved. http://www.Citrix.com/English/SS/downloads/index.asp

  You should be able to open your applications after you have downloaded this, let me know if this solves your problem. If this is not the case, will do a research still further for you.

• Unable to activate Windows Vista due to the 'security error.

  I have another computer that is currently "hard down" with hardware problems. I tried to use the startup disk original this machine to download Vista on a laptop instead.  I thought that either he would be acceptable since it would be only currently used on a PC, or later - as is typical with Microsoft software on shelf - it could be loaded on a desktop and two laptops.  How can I activate Vista on this laptop without the 'security error", at least temporarily.

  I have another computer that is currently "hard down" with hardware problems. I tried to use the startup disk original this machine to download Vista on a laptop instead.  I thought that either he would be acceptable since it would be only currently used on a PC, or later - as is typical with Microsoft software on shelf - it could be loaded on a desktop and two laptops.  How can I activate Vista on this laptop without the 'security error", at least temporarily.

  Hey Mark_L_Storm

  If vista is preinstalled on the computer "hard down", that it is linked to the original machine it is installed

  It cannot be transferred to another machine

  If a retail vista license, it can be transferred to another machine

  but the rule is a vista = vista anytime facility license

  "or later — as is typical with Microsoft software on shelf - it could be loaded on a desktop and two laptops."

  This isn't the case at all

  a vista license = a vista installation

  Walter, the time zone traveller

• Muse of the links in iFrame not to launch Apple Maps, but due to HTML.

  Go to this Web site and the date of May 28/29

  TOUR

  Click on the 'map' and on your desktop, it will launch Apple Maps.

  If you try it on an iPhone, it will hold no cards of Apple.

  BUT

  If you go to this site, where the direct file is at, it works perfectly

  http://www.7thheavenband.com/tour2.html

  which means that this problem is in the Muse.

  I wish that muse could Tables

  or bring GoLive - which was perfect for his time and simple to use and fast.

  My experience:

  Muse - VERY limited and slow growth with the basic things (tables? anyone?)

  Dreamweaver - too much coding for a site fast, too powerful for most of my needs of consumers

  your site works on my iphone 3

  iPhones don't have a lot of power, so it could just be a case of what they need more. best rendor WiFi card?

  

• Download cffile - error due to the security setting

  Try to download any file using cffile download to a hosted Web site generates the CFCATCH errors:
  
  Access denied message(java.io.FilePermission C:\CFusionMX61\runtime\servers\default\SERVER-INF\temp\ wwwroot-tmp lu \neotmp38260.tmp)
  Type Security
  
  The download works fine on my test MX7 Server and seems to be the result of a share of the hosting company server upgrade as the download of cffile is knocked out also on other sites I have with the same hosting company.
  
  The error seems to occur at the place where the coldfusion server stores the file to download in a .tmp temporary file in a temporary folder before passing on the destination folder in the right format to .doc that is.
  
  My impression is that it is a simple permission problem but the host insists that there is no restraint on this download. Has anyone encountered this before?
  
  A large part of the obligation for any assistance.
  
  Tony D
  

  In fact, I spoke too soon. Download of cffile works after upgrade to MX7 so maybe the host said it straight when they called their MX6.1 server a bit of a 'small '.

  Thank you for your time,

• Security issues for XP Pro to format hard drive in a Vista Home Premium computer

  My laptop was running XP Pro.  A few days ago, I accidentally spilled a glass of water on it and the computer died.  I took apart an old external 2.5 drive I had and inserted the laptop drive so that I could recover the files from my laptop.  The other computer in the House is the Office of my wife in Vista Home Premium.  Here's my problem:

  The Vista computer will read the reader very well except for the fact that I can't access many of my files due to the security clearance.  I understood that in Vista, I can take possession, but so far, I figured out how to make it only one file at a time.  For example, I took possession of a record, but then I had to take care of the folders inside this folder, and then I had to take possession of individual files inside this folder.  Even when I try to open a Word document that I have to go through the security process complete to open it.

  Is it possible for me to have access to everything by changing some settings in Vista.  Finally, I'm going to buy a new laptop, and I need to transfer all my files to it.  I don't want to have to get clearance for thousands of files one at a time.  Help, please.

  Thank you

  Derrick

  It is more permissions that it owns.  I guess almost all of the files to copy are in the Documents and settings folder.  So give yourself permissions to full right for all files and folders and subfolders of this folder (both in the main section and in particular advanced section - and don't forget to check the box to include all the files and subdirectories).  That should do the trick.

  If you are still having problems - maybe these can help you get through them, here is more information about permissions and ownership:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ACS database does not not after having changed the secondary ip of acs.

  Hello.. Im having 2 ACS 3.1 server. ACS01 (primary) & ACS02 (secondary). We recently moved ACS02 to another site and has changed its ip address.

  When we of database replication from ACS01, we received the error message saying ACS02 has refused the request of replication.

  Any idea what can be the problem?

  Consider these elements when you implement the database replication feature Cisco Secure:

  (1) ACS supports only supported replication of database to other ACS servers. All ACS servers participating in the Cisco Secure database replication must run the same version and patch to FAC level.

  (2) the principal server copy compressed and encrypted the database on the secondary server components. This transmission is done via a connection TCP, Port 2000. The TCP session is authenticated and using an encrypted protocol, Cisco-owners.

  (3) only hosts properly configured, valid ACS can be secondary servers. To add a secondary server, configure it in the AAA servers table in the section of this document Network Configuration. When a server is added to the AAA servers table, the server is displayed for selection as a secondary server in the list of AAA servers as replication partners, on the Cisco Secure database replication page.

  (4) the principal server must be configured as an AAA server and must have a key. The secondary server must have a primary server configured as an AAA server and its key for the primary server must match the key primary servers.

  (5) secondary servers replication takes place sequentially in the order listed in the replication list under replication partners, on the Cisco Secure database replication page. (6) the secondary server that receives the replicated components must be configured to accept replication of database from the primary server. To configure a secondary server for database replication, refer to configuring a secondary Cisco Secure ACS Server of this document section.

  (7) ACS does not support two-way replication of database. The secondary server, which receives the replicated components, check that the primary server is not on its list of replication. If this is not the case, the secondary server accepts replicated components. If so, it rejects the components.

  (8) to replicate the seller of RADIUS defined by the user and the configurations of the specific attribute (VSA) provider successfully, definitions have to be replicated must be identical on the primary and secondary servers. This includes seller RADIUS slots occupy sellers RADIUS defined by the user. For more information on the sellers of the RADIUS and the VSA attributes defined by the user, see section User-Defined RADIUS vendors and VSA sets the document Cisco Secure ACS database command-line Utility.

• ACS Express 5.0 - "SSO" does that mean?

  Hi all,

  datasheet ACS Express 5.0 States: "Cisco ACS Express supports a maximum of 50 clients AAA and 350 single user connections in a 24 hour period.

  It is clear, what is the meaning of max 50 clients AAA... actually, what is not clear about the authentication of 350 unique users max.

  If I use 802.1 IBNS with PEAP-MSCHAP to make machine authentication authentication of each machine will be considered a single logon... huh? What happens if there is no laptop assigned to sales that has spent a lot of time in the Office?

  Whenever these laptops reconnect to the network wil count as additional logging or and increase the connection of one meter or since this laptop is already authenticated on the morning t will not be counted as a single additional connection...

  My question is related to the fact that I have a client who wanto to introduce IBNS-802. 1 X, but have 'only' 20-25 clients AAA and up to 200 users (where about 100 are portable)... and using ACS 5.0 redundantly will be too expensive...

  Thanks for a response

  Omar

  The ACS Express 5.0 device is designed for a maximum of 350 users. This limit does not apply number of connections.

  Cisco Secure Access Control Server Express 5.0 QA

  http://www.Cisco.com/en/us/prod/collateral/netmgtsw/ps5698/ps6767/ps8543/ps8724/prod_qas0900aecd806d3a4d.html

  Q: how is Cisco Secure ACS Express positioned compared to Cisco Secure ACS for windows (ACS) and Cisco Secure ACS Solution Engine (ACS SE)?

  A. ... Cisco Secure ACS Express is well suited for deployments that need a solution of access control for less than 350 users and 50 aircraft. This product is intended to be used for small and medium enterprises, retail sites and branches of companies where customers need a GUI easy to use yet require an approach that is comprehensive but simple features and a lower price point to address to the needs of their specific deployment.

  For a detailed feature set, please refer to the Cisco Secure ACS Express data sheet at http://www.cisco.com/go/acsexp...

• 1113 ACS SE upgrade 4.0.1.44 to 4.1.1.24 not

  Hello

  I am looking for some assistance, we have a v4.0.1.44 running Cisco ACS 1113 SE and try to update to v.4.2.0.124 following the instructions to upgrade to v4.1.1.24 first.

  We use the following CD

  "ACS SE overall upgrade CD ACS 3.3.4 and 4,1,1,24 implemented at level"

  We can download the 4.1.1.24 image of the ACS system via the distribution server, but the upgrade fails us got out following console when the attempt to upgrade has been tried;

  Upgrade package has not been verified.

  Apply this package to upgrade may corrupt the device

  Continue at your own risk!

  Continue? -y (yes), n (no) y

  Installation of Cisco Secure ACS Version: 4.1.1.24

  The upgrade... Upgrade process successfully launched

  Try to install ACS version 4.1 on software version 4.0.1.44

  Impossible to install Acs version 4.1 with software version 4.0.1.44

  GBA version 4.1 required software version 4.0.1.44

  First install the correct version of the software of the device

  Failed to upgrade to Cisco Secure ACS to 4.1.1.24

  Currently, our unit of ACS is the following:

  Cisco Secure ACS 4.0.1.44

  ACS - 4.0.144 - EnablePassword -CSCsh32888 fix (patch: 4.0.1.44 Thursday, November 22, 2007 19:51:37.95)

  The 4.0.1.44 application management software

  Base Unit 4.0.1.2 image

  CSA build 4.0.1.543.2 (Patch: 4_0_1_543)

  That would welcome suggestions.

  Concerning

  Jim.

  Hello Jim

  The upgrade package consists of 2 - files that is the management software and ACS software. You must first upgrade management and then continue the ACS software.

  The instructions are attached. I would like to know how it works.

  Thank you

  Nelson

• Updates of Windows SE ACS 1113-

  Hello

  Does cisco provides updates to the underlying windows server in ACS SE 1113? Patch updates are available for ACS 4.2, but how can update us underlying windows server, Does patches for ACS is sufficient for the underlying secure Windows Server.

  Hello

  devices of the ACS has the possibility to run the agent of the CSA that provide a level of security. Windows updates are performed via patches and are generally included in a process two step patch/upgrade. But it is not clear as to the upgrades are completed during the upgrade. If you need this documentation, please open a tac case and an engineer must be able to provide that for you.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Facebook game fake security alert

  I'm tryin to load a particular game (since I don't play others) on firefox, but it stops to load due to a security warning that is ridiculous!

  I can play the same game without problems in Chrome and Opera (I know that they use the same engine) and the best-ridiculous part is that I can play the game in 2 other browsers that simulate... firefox! bahahahahahahaha

  I load a photo that I took, but this forum is so 'good' set up that I can not! I know now that my problem will not be solved, but I want to check myself that I'll get ridiculous responses or no response at all on my first post here.

  The error I get is "sec_error_unknown-issuer" when trying to load Airport city

  In this case visit the godaddy.com site Web is enough: https://certs.godaddy.com/Repository.go