Pavilion 15-p251na: Date of start of guarantee very badly

Similar Questions

• MY hp pavilion dv7 - 1247cl will not start until it say BOOTMGR is missing.

  Original title: I have a laptop hp pavilion dv7 - 1247cl which cannot start it say BOOTMGR is missing, can you help me please?

  I WAS ABOUT TO ERASE THE DATA AND THE LAPTOP WAS DISCONNECTED SO NOW CANNOT START UP

  Hello

   

  1. what operating system is installed on the computer?

  2. What is the full error message?

  3. using a program to erase data?

  4. have you already tried booting in Safe Mode?

  See the following article:

  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»

  http://support.Microsoft.com/kb/2622803

• HP Pavilion g6-1145sg no longer starts.

  Hello

  My HP Pavilion 1145sg g6 won't start, what should I do? It stops with the Windows 7 logo start, I tried everything, I even tried to explain with the instalation of Windows 7 DVD, but nothing has worked, at least I tried a "hard drive Self Test separator", and then he said: 'hard drive Quick (303) 1. What should I do? I've always guaranteed. I made pictures of the card/number, the laptop and the error message: click here for Photos. Here are the photos/PDF for the guarantee of 'things': click here for Photos (I found the warranty PDF on my second HP Pavilion g6-1145sg that I bought at the same time in the same shop online for my son). I hope you can help me, thank you in advance.

  Yours faithfully,

  MJ van der Velden

  PS. the account is the name of my wife.

  Hello

  303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with startup problems you describe.

  As your laptop is still under warranty, contact HP (the telephone number can be found on the corresponding link below) and arrange for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Pavilion dv7-6b32us: that means start diagnosis failure ID QC6C51-5R67HW-QFPH4K-402BO3?

  HP Pavilion dv7-6b32us laptop

  Start-up took like 15 minutes so I did some diagnostics and received a failure id QC6C51-5R67HW-QFPH4K-402BO3

  The operating system could be zero, but not sure.

  What is the error? Can't seem to find anything online. Very much appreciate your help.

  Thank you!

  It seems that the hard drive has failed/is a failure and should be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• Pavilion HP 3200 does not start

  I have a HP Pavilion s3200n it tries to start, but will not start. I can hear it start but when I release the button it stops I suspect CPU. I have a set of recovery discs, but cannot get that far from having read disks.

  DonHa, welcome to the forum.

  Due to the age of the computer, I suspect a power supply (PSU) failure.  Here's a guide that will help you solve the problem.

  If your problem is solved, please click "accept as a Solution.

• Re: Tecra M4 has started making a very annoying sound

  Hello

  Some time ago my Tecra M4 has started doing a very annoying sound. It's a constant high tone. You don't hear it very clearly, but I'll give you a headache after a while.
  Does anyone know what it is and how I can make them disappear?

  Thank you!

  Sincerely,
  Seppe

  Hello

  have you tried to play with the microphone settings? It seems annoying this noise comes from the microphone

• Equium A100-338 has started to go very slow after using the recovery CD

  I used the recovery CD after my Equium A100-338 has started to go very slow, it still seems slower than it used to be.
  I haven't added anything to the computer from the CD recovery and verified the Manager tasks to see if I could spot anything suspicious.

  Statistics say, use 18-22% CPU, but the physical memory is about 68% is this normal or should it be less?

  Is there a list of standard processes I can check against mine to see if its doing something, it shouldn't be?

  Thank you

  Hello

  I think you feel that unity is a bit slow due to the high amount of different processes that run in the context of the BONE.

  The fact is that your laptop supports various features such as buttons FN, Toshiba control buttons, etc.
  All this has needs drivers.

  In addition, as I m not wrong the Norton Internet Security has been installed on your system.
  It s part of the image of Toshiba and this tool could affect the performance of the system.

  I have used in the past, but now changed to another application that doesn t need a lot of material resources.

  So if you want you can disable or delete some of the tools and utilities that are not important to you and could clean the system using a 3rd third party tool called CCleaner

  Welcome them

• is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  No doubt.  If in doubt, download qualified help to solve the problem. It can be easily fixed, or not.  We cannot tell from here.

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Pavilion 15 p158sa: Incorrect warranty start date

  Like so many others on this forum, my new laptop HP Pavilion has bad warranty start date.

  The laptop was purchased only on 11 January 2015. However, the warranty start date is 11/10/2014.

  Of course, I'd like it corrected.

  Until someone asks. Yes I can prove it.

  Thanks in advance

  James

  Hi @Jtsnr ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.

  Kind regards
  George

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion g7 - 1117cl: problem with starting up laptop

  My laptop simply no longer lights. I have a laptop HP Pavilion g7 - 1117cl... It was to have a cooling fan problem so I disassembled the laptop and he has succeeded, then reassembled and tried to turn on, but nothing... I disassembled again to see if there was anything, I done wrong and maybe found nothing so I put it back together and still nothing was. There is no battery connected, only the charger is plugged. Any suggestions?

  Hi there @DaMan23,

  Before you replaced the fan, did you get to try a BIOS reset? If this isn't the case, please put back the old fan in Notepad and try to do a reset of the BIOS with the old fan in.

  You receive errors with the old fan? What led to replace you the fan? The reason I ask is because of way General, the laptop must have some sort of indication that it starts. Even if the fan is malfunctioning. The fact that yours won't start not even for 1 second leads me to believe that the issue is not the fan.

  I looked the part number that you provided me. The fan you bought does not appear to be a part of certified HP. That said, there may be complications resulting from a scenario like that. I can't guarantee the functionality of the parts of a Web site not HP.

  Here's your Guide to Service and Maintenance. You will find the part number for the fan you need 639460-001. This includes the thermal replacement hardware.

  You can use the HP part Surfer to order a new fan that will be compatible with your laptop.

  If any step in this post helps you solve the problem, please click accept as Solution so that others can find the steps that help.

  Thank you!

• HP Pavilion Elite m9340f unable to start

  Hello

  My HP Pavilion Elite m9340f is not able to boot, just continues to run away (fires), but shows only an arrow on a black background and sometimes some movements.

  It has Windows 7, 64 - bit.

  Thank you

  Hello

  Finally, after many hours while the computer could not start, although it was by train and running, I did the following:

  1. the stop (press the button).

  2. turn on once again.

  3. press F8 immediately.

  4a through identification procedures.

  5. select restore system to a previous state.

  6. Select the date when the system works properly.

  7 follow the guests.

  This process has been successfully completed and the computer is now able to start properly again by itself (not necessary recovery disc).

  I would like to thank HP support for their initial contribution to this problem.

• Pavilion dx6500: Windows will not start

  I have laptop computer dx6500 computer laptop hp Pavilion Windows 7 Ultimate 64 bit running. I turn it on a day when he gave me a message that operating system is missing or damaged. Because I had valuable documents and other important stuffs on this subject, I decided to install a second operating system on the second partition and booted the laptop. I could get my fabrics that stood on the second partition and then I realized that the operating system has become two phone cuz always invite me to choose which operating system to boot from. Because I did not like that, I went to remove the operating system which was not established as the default operating system. The next day, I turn on the laptop to see a white screen with the message "press F1 to RESUME. or F10 Setup I pressed the F1 key and realized that it wasn't working, so I pressed the F10 key too but did not work too. So I decide to press any of the keyboard but realized that the keyboard did not. I decided to reformat then I inserted the windows installation CD in the drive so that he could boot from CD cos I put the CD drive as the first in the boot order but any time, I turned off the computer and turn it on, it goes back to same screen and would not even boot. Someone please help me!

  Hi @Dontworry,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6500 CTO Entertainment Notebook and questions with press < F1 > to < F2 > for the installer to start. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  If it's not a help to any first start Notepad hold b and Windows key. Just keep holding it. Once your nothing that happens, restart the laptop. This should restore the last configuration of the BIOS.
  
  Please let me know how it goes.
  
  Thank you.