Pavilion 500-336: 500-336 Clubhouse no sound decision-making back but sound from the headphone jack output

Similar Questions

• No sound from front headphone jack on dimension4550 jack

  receive sound through the connected usb device. No sound via the headphones.

  Hi radcliffesmith,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  No sound in Windows

  Drivers & downloads for Dimension 4550

  I hope this helps.

• No sound from front headphone jack

  Just installed Creative blaster x - fi titanium sound card in my desktop HP P7 1234.  Everything works fine except no sound from the front headphone jack.  The jacdk worked until I installed the card.  I need the decision-making to use as another line for around the music of the pool.

  Any help will be greatly appreciated

  Thank you

  Jay

  If you install a card its additrional you can only use this smart - card ports on Board will be disabled.
  You need to check if you can connect the ports of the façade to the new card - otherwise you will get a card where it would work.

  Or simply use an audio splitter (Y-cable) to connect a second audio device to the new card.

  C.

• No sound from the headphones and speaker sound is crackly and distorted

  Original title:

  Audio problems

  Taken my headphones do not work when I plug in the headphones and the sound of my speakers is now crackley and distorted, any help?

  Hello

  1. have you tried to connect the headphones on another computer?

  2. What is the brand and model of headphones?

  3A this works much earlier?

  4 you did changes to the computer before the show?

  Method 1:

  Run the audio Troubleshooter that might help us diagnose the problem better.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2: Show disabled devices and headphones as a default value.

  Exercise the functions mentioned below to set the headset as default:

  a. go to Start and click on Control Panel.

  b. click on her, then a new window will open.

  (c) in the new window click on the "read"tab, right-click in the window and then click Show disabled devices. "

  d now check if the headset is listed there and right-click on it and choose allow.

  e. select headphones and click on ""as a default ". "

  Check if it works.

  In addition, see the following links:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps!

• I have no sound card, so, how can I get the sound to the headphone,

  I had to reload XP on my Dell T3400. I don't have a card's equipped. I used to listen to music through the headset by using media player. Now the media player won't say I have no sound card, which I did not.

  I am able not to circumvent the "no sound card" and send sound to the headphone jack or better yet, Jack green at the back of the computer.  It used to work before I formatted, but I don't know what I did before.
  Thank you very much

  I solved the problem. I have downloaded a driver sound (Soundmax) and now it works fine.

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.

• I have no sound from the external speaker

  I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

  How did the car system connected to the car?

• Satellite M305D: No sound through the headphones but the speakers don't work

  Hey,.

  I have a M305D I reformatted and installed Vista Ultimate. I installed all necessary drivers.

  However, when I plug the headphones in the headphone jack I have no sound in headphones and the loudspeakers continue to play.

  I don't know if the socket has worked before I refomrated.

  So I can't tell if it's a pre-existing condition.

  Assistance on the issue of the helmet would be greatly appreciated.

  Hello

  Have you tested with another helmet?

  Maybe the little switch that is part of the headphone jack works not properly and doesn t switch between speakers and headphones.
  In this case the question would be related to hardware

  I m not very well if this problem could be related to a malfunction of the software, but it would be really interesting to know if the problem persists after installing the OS from the recovery DVD.

• No sound from the headset when using hdmi

  I use the HDMI for a big screen, but with this use, the headphone is turned off. I need to be able to use the HDMI for the monitor and the headphone jack for sound.

  If you have no sound with the plug HDMI is connected, it means that your current sound settings are set for audio must be set to the HDMI output. Go to sound settings and pass parameters of HDMI output for speakers.

  Open Sound by clicking on the Start button, and then click Control Panel. In the search box, type sound, and then click sound

  In the Audio window, select the playback tab
  Replace the default value with the green mark check speakers with HDMI connected.

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• No sound from the speakers, but the headphone jack works fine

  Original title: computer with no sound

  My computer has no sound coming from the speakers, but the headphone jack works fine. Can someone help me with this?

  Hi jbreezy,.

  We recommend you to check if the speaker is defined as default playback on your computer device. To do this, try the following steps:
  a. right click on the sound/volume icon in the right corner of the task bar, then click on "adjust audio properties".
  b. click on the Volume tab, click Advanced under Speaker settings, select the speaker and click ok.
  c. click on the tab Audio, audio playback device, select default.
  d. click apply and then click ok.
  e. check if the problem persists.

  For additional troubleshooting steps, see How to fix the sound problems in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm not all the sounds from the speakers. The volume is up

  I'm not all the sounds from the speakers.  The volume is up

  The following links may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  (307918) how to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB

• No sound from the tv with hdmi w3 connection

  I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

  I was unable to locate a compatible driver on intel.com.

  However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

  I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

  I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

  Thanks for your suggestions and help.

  Problem solved (sorta).