Pavilion a1140n dvd from the optical drive

Similar Questions

• Re: DVD of the (optical) drive cannot read a disc when inserted.

  Hello everyone.

  MY DVD drive can not read a disc when inserted.

  When I check the Device Manager, it has the following against the optical drive error message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  How can I solve this problem and fix it for free if possible? Download a patch from the website of toshiba?

  Your help is greatly appreciated.

  Mark

  See also http://support.microsoft.com/kb/314060/en-us and post comments.

• Boot from the optical drive on a Lenovo H430

  I try to start on a DVD of Win7, but I am unable to set the boot priority to any type of optical drive in the BIOS. The BIOS boot devices menu is the same. I know that I can use the USB tool, but also, it does not work. Y at - it a patch of Lenovo BIOS that I can ask, or another solution to be able to boot to the optical drive?

  In fact, I realized myself. There was an option in the output menu that allowed for it. Thank you for your help.

• How to remove the disc from the optical drive

  Had to change hard drive on MacBook Pro - had tried to use Drive Genius to fix an old - not good - now have a new HD in there with no OS - now have a disc in the drive I can not eject so I can load OSX of a disc and eith no OS can not download oe ElCapitan Yosemite. How can I get this drive?

  It doesn't have an operating system to work, just the firmware. If he tries always to start (for example, the startup chime), turn the power off, press and hold the trackpad in the down position, then press the power switch. That force - eject anything in the optical drive.

• error 303_will will not boot from the optical drive W / re disc

  Thanks for your time

  I have a pre Home HP G71 449WM computer PORTABLE PC WINDOWS 7 X 64

  I ran diag, he gave me (hard disk 1 (303) quick test full 10% complete)

  (305) full hard disk 1, HARD TEST drive has FAILED: what about hard disk

  failing or failed in any case, I changed the HARD drive for an ssd sata 2 and installed

  He also ordered the discs (3) of recovering formatted the SSD to another

  PC (primary healthy NTFS partition) No. DRIVE LETTER when formatted

  I loaded the 1st recovery disc in the optical drive, but it wouldn't start

  optical drive AND MY SCREEN IS WHITE

  the recovery disc are Moose HP (BDPX4721)

  THE SSD WORKED OK IN THE OTHER PC... ANY IDEAS WHAT I AM DOING WRONG?

  the printer has to do with boot_recovery_error 303

• Can I replace the optical drive of the ENVY 15 t-k000 with a hard drive?

  Hello!!

  I just got the HP ENVY 15 t-k000 http://www.shopping.hp.com/en_US/home-office/-/products/Laptops/HP-ENVY/G0T95AV?HP-ENVY-15t

  Can I replace the optical drive with an SSD (for example, Seagate 600 240 G)? Thank you!

  I saw there are several videos helping to remove the top cover and replace the optical drive. But it does not expressly say that the optical drive can be replaced by a hard drive.

  http://support.HP.com/us-en/document/c04324972

  http://support.HP.com/us-en/document/c04334360

  Thank you very much!

  Best,

  siriusblackp

  Yes you can. Here's the part you have to do with. Just remove the optical drive, add a hard disk in one of these adapters and replace it for the optical drive:

  https://www.jacobsparts.com/items/HDDBAY-02/

  You may also need to swap the façade of the old optical disc to make the installation of good look.

  I wouldn't use this for one SSD. An SSD belonged to the main disk space to enjoy the speed. The drive into the optical drive adapter will not be bootable and it will be not given quite as fast as the main hard drive transfer speeds. So if you have a drive in this card, a big (1 TB) and slow (5400 RPM) drive would be preferable. It will be purely for storage and it is still fast enough to see the video of for example but if you are doing video editing I would try not to edit videos from the optical drive Bay. Move them to the fastest reader first.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 15-p263nl: 2nd HARD drive cart, replace the optical drive for HP Pavilion p263nl 15 Notebook PC & Windows 10

  Hi all!

  I intend to add an SSD for my HP Pavilion p263nl-15 Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.

  In other words, there is my plan:

  1 remove the real disk HDD hard bay and replace it with the new SSD.

  2. remove the optical drive and replace it with the adapter caddy containing my old HDD.

  3. do a clean install of Windows 10 on the SSD using a USB key recovery made with my real Windows 10 system (which has been updated from Windows 8.1 July 2016).

  I already have a 120 GB OCZ SSD (OCZ Vertex 3).

  I have a few questions before buying the adapter:

  1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?

  2 should. What size the card be? I found offers for 9.5 mm and 12.7 mm that are supposed to be suitable for HP Pavilion in general

  3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?

  4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.

  Thanks in advance for your answers.

  Alessandro

  p.s. in this section of the forum (where I took most of the post), the solution worked almost perfectly, but it's a different product of the Pavilion 15 ^^

  Hello

  1. Yes,

  2. your machines use 9.5 mm SATA Tray,

  3 problem? I can't answer this question because who knows nothing until the track.

  4. I don't know how you create USB recovery but a good new installation should work.

  Kind regards.

• HP Pavilion 15-e073ca: 2nd HARD drive cart, replace the optical drive for HP Pavilion e073ca 15 Notebook PC & Windows 10

  Hello!

  I intend to add an SSD in my two years 15-e073ca HP Pavilion Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.

  In other words, there is my plan:

  1 remove the real disk HDD hard bay and replace it with the new SSD.

  2. remove the optical drive and replace it with the adapter caddy containing my old HDD.

  3. do a clean install of Windows 10 on the SSD, using a recovery USB stick made with my system Windows 10 real (which has been updated from Windows 8.1).

  I plan to purchase the following parts:

  1 - a HDD / SSD cart adapter for HP Pavilion 15 (model OBHD9-SATA-SATA-BU9), of NewmodeUS (http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=583)

  2 - a SSD 128 GB (article SDSSDHP - 128G), SanDisk (http://www.sandisk.com/products/ssd/sata/ultra-plus/?capacity=128gb)

  I have a few questions before I buy parts:

  1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?

  2 - the height of the SSD is 7mm, and it seems that my old HDD is 9.5 mm in height (model WDC WD10JPVT-60A1YT0). It would cause no problem (I need to add spacers)?

  3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?

  4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.

  Thanks in advance for your answers.

  Haghe

  Your plan is perfect. The SSD to will of 7 mm that always come back fine it just will be lower in the caddy. The holes and SATA connections are in the same place as a hard drive of 9.5 mm. You can use a spacer (many SSD include one in the box) but not really necessary.

  Installing SSD for Windows 10 the way you expect is not really "own", that he will again introduce files and programs, in my opinion and certainly drivers. Whatever it is, it works perfectly and activates the old installation has been enabled.

  The hard disk in the optical adapter will not be bootable and will transfer the data a bit slower than a drive in the main compartment, but will still be usable for most cases. If you need fast input/output like Photoshop or video editing move the job file to the first SSD. Alternatively, you may wish to consider documents and photos and other migration on the HARD drive to keep the 128 GB SSD to fill. You can right-click on these files and select 'place' and move them. After the back if you need some help with that.

  Enjoy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• Is there an easy way to identify the type of disk required by the optical drive in my computer? How to identify DVD + compared to a DVD player?

  At home, my wife and I have two computers four desktop computers and laptops.  I often bring the laptop I got from my employer to use when I travel or work at home. Is there an easy way to identify the type of optical drive required by the optical drive in a computer?  How to identify DVD + compared to a DVD player?  I have never the disk right when I need to burn something.  Thank you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use

  The above should help you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  General information on CD burning.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion n031se-15 Notebook PC - can I replace the optical drive on my own?

  I would be well capable of replacing the existing with a new dvd rw drive?

  Hello

  Yes, you can replace it with a new one. Click on the link below and check page 3 for more information on the optical drive. Page 75 on how to replace the drive.

  http://h10032.www1.HP.com/CTG/manual/c04439615.PDF

• How to force eject a disc from the external drive?

  Applications > utilities > disk utility > Eject does not eject a DVD from the Apple external disk drive.  Is there another way?

  How to eject your disc?

  How to eject a CD from the macbook Pro

  more

  Mac eject the optical drive

• put the HARD drive in the optical drive stock

  Hi all

  I'm sorry if this is redundant, but I couldn't find the answer to any where or through telephone Support from Lenovo.

  I received the W530 with stock 500 GB HARD drive, but I want to replace it with the Pro of 840 Samsung SSD and put the HARD drive in the optical drive. I just restore the image from HARD disc for my SSD orginal (now in the original HARD drive box).

  At first I thought that I just leave the HARD drive in the original Bay and use the optical drive for the SSD, but since I use the SSD for the OS, and I want to use the DVD player sometimes, I thought I should put the SSD in original HDD bay and the HARD disk in the optical drive.

  I'm sure I've read that a lot of people did it with success, but I do not know much about computers and have never done nothing wise hardwear. I tried to put the HARD drive in the caddy Newmode U.S. optical drive, but it wouldn't fit (the screw on the caddy heads are too big). I think it's because the HARD drive still has the metal casing on it. I am worried, however, that if I remove the caddy, it voids my warranty, and above all, I am wanting to make sure it is the correct and safe way to the stock HARD drive in the optical drive.

  I put the rails HARD original on the SSD drive rubber because it is in which Bay but you have no other rails to the HARD drive in the case of the optical drive, and I don't even think he would fit in.

  So, it's OK to remove the carriage on the stock of HARD drive and put it in the optical drive without any kind of rails or protection (but attach it to the optical drive with the supplied screws caddy)? I think that's what I have to do anyway with the SSd, if she had to go into the optical drive.

  I am also an upgrade of RAM, but the keyboard under the bottom access RAM screw is stripped, so I can't remove the original RAM (it is under keyboard) and use the optimal 0 and DIMM slot installation 1. Any ideas?

  Thanks for your time, and once again, sorry if this is very basic.

  Change hard drives and memory do not void the warranty.

  The DSS must be installed exactly as the original HARD drive was, with rails caddy and rubber.

  The HARD drive in DVD case must be inserted with the 4 screws with the caddy, nothing else.

  To remove the stripped screw, you must use the small (jeweller preference) needle clamp with extreme caution, or slowly drop the screw head to create a new location. The second option is more dangerous because it produces small deposits of metal. If you can't do it yourself, ajeweller could do this easily for you.

  Good luck!

• Vista 64 Bit Home Premium does not start when a disc is in the optical drive

  I tried to understand this for a long time, but I thought I might as well ask for help.  I use Vista 64 - bit Home Edition Premium and the problem I have is that I cannot restart my machine if a disc is in the optical drive. Specifically, if I have a DVD or Bluray disc in the optical drive (IE a BD - ROM drive). When I restart my computer and a disk is present, the startup process is going past the initial windows screen, but that's how far it goes. My desktop (I don't have a password to connect). Initially, I thought it was a matter of priority to boot but the boot process starts from the hard drive but stops at half way through. Then, I went into the BIOS and removed the optical drive completely from the boot priority list.  But there is no change in behavior. The process stops with the only thing visible on the splash screen is a black screen and the hard drive light flashes and goes out from time to time.  I use this computer as my Home Theater PC and sometimes I have to restart my machine when a movie DVD or a Bluray movie is in the optical drive. I would appreciate any response that can help me solve this problem...

  Thanks in advance...

  There may be something wrong with the files on your hard disk.  We will try to update to see if it helps:

  Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (I believe you need a disc for Installation of Vista to do that, even if some Installtion OEM disc might work, but probably not all the recovery discs).

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If this does not work, or if you do not have the disk, try EasyBCD http://neosmart.net/dl.php?id=1 and see if that works and does everything well.  Make sure what you are doing or you could mess up your boot files and you'd be in a lot of trouble.

  I don't know if the problem is even caused by startup files (but it is possible if it is not the BIOS), but you'd better check and if the procedures are followed to the letter as stated there is no harm in trying.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• startup problem: how to fix the optical drive?

  My sister asked me to install a new copy of windows. First I tried to put the win7 dvd in the drive, it does not display the traditional press any key to boot from the cd/dvd. then I changed the settings in bios to boot from the cd, which gave no result. then I tried the boot to the optical drive option, it just went ahead and started from the hard drive. I thought it would be the dvd, the same results from a winxp cd. My next thought was the drive, it normally detected a bunch of random but refused to thank DVD that has the existence of a windows install disk. Please someone help stop harassing my sister

  You can try this first: http://arstechnica.com/business/news/2009/12/-the-usb-flash-drive.ars

  Install the system and then study what is the problem with the optical drive. Make sure that it has the latest version of the BIOS...