Pavilion a1600n (RJ181AA). will not feed.

Similar Questions

• Will NOT feed Equium L350 - 10L

  Hello

  I have a Satellite L350 - 10L laptop and for some reason any it will not feed.
  I tried to turn on without the battery and still no luck.

  Can someone help me please?

  I put t really know how to help her in this situation.
  Remove the battery, connect the power supply current and try to start it.

  If there is no sign of life I assume electronic power supply is defective.

  You can not force laptop to start if there is no reaction.

• HP ENVY 7640: new HP Envy 7640 will not feed documents in scan mode

  New HP ENVY 7640 will not feed for scanning documents.  It transmit documents in copy mode but not when you try to scan several pages.

  Hello

  Thank you for using the HP Forums.

  Have you installed the software features FULL?

  If this isn't the case, please download and install the FULL features software:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have done this, launch the Scan software (via the HP printer Assistant) and make sure that the source is "heavy use document feeder.  (Example shown)

  

  For more tips scan, please reder to this resource:

  Scanning for Dummies

  Your printer uses the NEW interface of scanning.

  Hope that helps!

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Printer will not feed the paper card stock

  We have an Officejet Pro 8600 who will not feed the paper card stock. It was the printer that I used when I worked and did a great job on standard paper, but it won't take my wife stock card paper craft. We used to have a Deskjet F4400 HP all in one and we were able to print. Any suggestions would be greatly appreciated.

  John

  John,

  Welcome to the Community Forum of HP.

  Try indicating what type of media you print to the printer - if your media in the printing preferences settings do not understand "card", you should choose something else which is similar: Matt Brochure, card, 'something' that kind of card stock for the printer to the printer waits 'thick' paper looks.

  Printing preferences - Windows and Mac

  and... not really related, but may have some relevance:

  Print Labels_Business-Cards_Cards

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• hp8550 will not feed paper

  My Hp 8550 stopped feding paper. What can cause this?

  my printer will not feed paper into the printer.  He just left.  What's wrong?

• CP 1518ni will not feed

  I have one nor Laserjet CP 1518 which had a paper jam. I Remover the paper 1 piece, but now the printer will not one of the 2 trays feed. I checked the paper path as much as I can and can not see obstructions. The book is not even to be levied on the trays. Help!

  Hi Kman909,

  Welcome to the HP Forums.

  I see that you have had a paper jam and you were able to delete it in one piece, but now the printer will not feed paper.
  I'll be happy to help you.

  I have provided a document through the steps to see if it will solve this problem.

  ' Load paper ' Error Message is displayed and the printer is not look upward or paper feeding.

  This document will show you all the areas to check in case another paper was also drawn on the inside.

  The Attention will Flash and a "Paper jam" Message appears on the control panel.

  Remove paper tray and gently turn the printer on the side and check the bottom of the printer to make sure that a paper is not jammed in the printer.

  Please provide detailed results if you're still having problems.

  There are flashing lights or the error messages on the printer?

  The printer is connected directly to a wall outlet?

  Have you been able to print the free configuration page material?

  Thanks for posting on the HP Forums.
  Have a great day.

• OfficeJet Pro 8600 (CN578A) will not feed photo paper.

  New N911A will not feed paper tray default photo. It gives an out of paper message. Regular paper feeds very well. The optional feeder is not installed (I have not). This is a brand new, out of the box machine replacing a C7280 with failure of distribution of ink. I used this article to all my printers previous HP with no problems. This is HP Advanced Photo paper (66lb/10.5 mil, sense of self)

  Just got off the phone with HP... my printer BRAND NEW so... Remove the tray paper... tip top printer has left... using a clean t-shirt... Clean the gray rubber roll... a little... hard paper will feed properly...

  That is all... should not have to do, BUT it's best that packing this f * er on the rise and water and the ascent to Costco...

  have a nice day

• HP Officejet 6500 a Plus-710n, multi-page document will not feed through the top.

  There is no error messages, just won't get out the paper. I am able to scan from the glass top, individually, but will not feed from the top on several pages.

  Hi Ginny29,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  OfficeJet 6500 has

  Let me know how it goes.

• Pavilion 1050NL PC will not accept the upgrade of ghraphics GTX760

  Hello, I replaced the graphics card, but when I switch on the PC, I only get the splash screen and a beep and the system will not continue to start, after a while, I get 3 beeps and stops?

  I also replaced to 500W power supply before and the PC works fine with the old graphics card.

  I placed the new graphics card in another older Pavilion and to work?

  This model of PC is not allow different config. by the BIOS? or something like that?

  Or maybe the power is not enough?

  Thanks in advance for your help :-)

  Ruud

  Ok.

  It just means that the motherboard does not work with the video card. You could try to return as incompatible video card and opting for ATI Radeon model for better compatibility.

• OfficeJet Pro 8500 a model: A910: paper will not feed

  My 8500 receives the document and begins to prepare for print but don't feed does not in any paper. I used it to print a front right envelope stoped feeding.

  Hello and welcome to the community of HP @Steve1358,

  I understand that your HP Officejet Pro 8500 does not feed paper. I'll be happy yo help.

  Here is a link to a document offering solutions to troubleshooting to your question.

  HP Officejet Pro 8500 has e-all-in-One Printer Series (A910) - displays a Message "Out of paper" and the product does not look upward or paper feed "

  Try the above steps and let me know the results.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• HP dv4-1123us Pavilion Media Card will not read

  I have a Pavilion dv4-1123us who will not read a 16 GB SDHC media. He reads a xD 512 MB and 2 GB.

  What's wrong?

  I wanted to let you know that what you did was good.  I invited a friend of mine who is quite in computer problems.  He checked that the drivers you have installed were correct. Soon, he realized he had a problem with my Photo Picasa 3 program. There google something like Picasa won't read the card camera and found that there was an automatic upgrade a few days ago (when I started having the problem) that created this problem.

  It's the Gremlin Picasa version Build 3.9 136.18. affecting Windows Vista and XP and Windows 8.

  This is what happens:

  Hello

  There is a problem with imports in the latest version of Picasa (3.9 Build 136.18). Windows Vista and XP seems to be affected. Until it's resolved use Windows to perform the import.

• New Pavilion g7-2220 will not load Windows to start-up

  Hello

  I just bought a new Pavilion g7-2220 and am just finishing the initial commissioning.  All registration modules and guests of live recording of MS are fine, but then the computer will not load Windows.  He explains in brief it is impossible to load Windows from the hard drive in a small dialogue window, then restarts and brings back me guests for the first time again.  It is supposed to be preloaded with Windows 8.

  Any help would be appreciated.  Again, this computer is brand new.

  Thank you.

  Hey Shannon3363,

  I'm very sorry to hear that you are having problems of this kind out of the box. The first option, I'd watch is an Exchange. If this is not a viable option, you can reset the operating system. This is a very simple process.

  1. prior to turn on/off the laptop, press in and hold the escape key

  2. press the power button as usual to start and hold down ESC until you see the Menu Start Up

  3. on the Start Menu, press F11 to go in Recovery Manager

  4. choose your keyboard

  5. click on troubleshoot

  6. click on reset your PC

  7. select just delete my files

  Leave about 30-45 minutes for the reset is complete. If you're still having problems with this load Windows normally, please let me know. Once again I aplogize for the inconvenience. Depending on where you have, there could be several reasons so that he can behave in this way. If you've got it to a brick and mortar store, technicians will provide implementation services and anything can happen during this period. I'll keep an eye out for your answer!

• HP Pavilion dv5z-1200 will not start, flashing LEDs

  LEDs keep blinking once every 4-5 seconds, computer does not start even in the BIOS.  Out of warranty.  The table shows the CPU is not functional.  After the hard reset several times, after the failure of the CMOS, I reinstalled the memory modules, nothing helps.  I opened the darn thing, reinstall the CPU, cleaned the existing thermal paste and replaced with a high thermal conductivity, one and clean thermal gel pads ugly that supposedly provide a cooling the GPU.  All this for nothing.

  Should I assume by now that the CPU is fried, or is there a chance to distance the BIOS EPROM chip is toast and cause all this?  Someone has experience in this sense, is the flashing model good to locate the faulty component?  All ready to offer their advice Jan 11-12 HP Expert?  I replaced a BIOS chip in an another HP Pavilion of last spring, so it wouldn't be a problem.  Don't want to invest all efforts - and paste - for nothing.

  In any case, this is / was my last HP laptop ever.  Between a ze4547 and this dv5z, I got so of many hardware problems, I prefer to buy netbooks cheap every two years than spend a zillion things expensive, shiny, flashy with abject genius inside.

  Thanks in advance to anyone!

  Taking up this issue and reported a permanent fix (i.e., more than 5 months).  Yet once, the defect could not solder in the graphics chip ATI Radeon (Northbridge).

  Chip HP ships this with a simple gel pad main Board between the radiator and the graphics, which after > 1 year of running hot develops inclusions of air and turns of conductor of heat a heat insulator.  Due to the high temperature resistance, brazing under the chip will slowly oxidize anr / or crystallize and develop cracks and inclusions of oxide.  The only solution in addition to buying a new card of mother is reinvest with a heat gun, or using a special station of redistribution and the improvement of heat transfer to the heatsink.

  Here's what the complete repair consists of:

  -Disassemble the laptop according to the instructions in the maintenance manual; Make sure that keep track of where each screw came from

  -Remove the heat sink fan and clean the end inside of the metal fins (simply by blowing canned air will not work)

  -cut a ~ 1 mm of thickness copper thick to the exact dimensions of the cushion gel covering the ATI Radeon chip and ensure its two surfaces are clear of any oxide

  -Clean the CPU and the Radeon perfectly cooling surfaces using 92% isopropyl alcohol; in a similar way to wipe the corresponding surfaces of the shiny heatsink

  -dissolve welding flow or Rosin in a few mL of 92% + isopropanol

  -pour a few drops of this solution of rosin under the chip Radeon on all 4 sides; Rosin ensures that reinvest the chip will recreate connections free of oxide with the main card; use a pipette or a pair of tweezers for this and not to spill the solution outside the area of interest

  -make a mask cardboard lined with aluminum for the entire main Board having a place of opening in the Center exactly as big as the Radeon chip; Make sure that the coating of aluminum foil extends to the lower part of the mask through the operning square to protect the card against high temperatures. use this youtube video as a guide (minute 06:50)

  -heat gun to regular heat on 'Medium' (or 'Low' if only two power settings); taking the mask in place immediately on top of the Radeon chip using a tool metal long (so you do not burn your fingers), slowly heat by lowering the gun hot air for the duration of a minute

  -maintain the hot graphics chip for about 30 seconds into the air gun hot about 1-2 inches above the chip. Make sure that the mask with double foil is aligned with the chip to avoid burning its below or other components of the motherboard; consider wearing a thermal glove or leather on the hand that holds the mask down with this tool metal long

  -slowly raise the heat gun on the time of ~ 30 seconds and then remove the mask and let the chip and the main map to cool for about 1-2 minutes

  -It is best to test repair before reassembly of the computer; to do this, connect the power button, display, cooling fan, a single chip of RAM and a charged battery to the main card and turn on the laptop the bone bare; See the HP logo on the screen for a success to reinvest

  -use of money from high-quality thermal compound (for example, Arctic Silver 5) and coat the surfaces of cooling of the CPU and Radeon chip, as well as the corresponding surfaces on the heatsink of heat and the puck in copper, with one layer, thin and uniform; Wipe all spilled; Place the wedge of copper on the graphics chip and carefully assemble the heat sink; don't forget to plug the fan on the main card

  -Finally, back up the phone by following the steps for disassembly in reverse order; do not mix the screws, like using a long screw where it was not may cause a short circuit or cracks in the main map

  -Use of SpeedFan to monitor the performance of you cooling system in the processor; periodically blow out or spend vacuuming of dust between the cooling fins.

  Good luck to lovers!

• Satellite P100 will not feed or has white screen

  So, I have this laptop I missed about 4 months ago. Not feed the most. I can press the Start button and it looks like his work, but there is nothing on the screen. I can hear the fan from time to time, then a beep after about 1 min after 'start-up', but screen seems dead. Nothing appears on the screen at all.

  I tried with and without battery power.

  My laptop can become very hot and freeze that I remember.

  I replaced my Toshiba with another laptop but if my Satellite is not going to work again is a way I can get the files out there still?

  Thanks for your help.

  Hello

  > I replaced my Toshiba with another laptop but if my Satellite is not going to work again is a way I can get the files out there still?
  You need the data and files from the internal HARD drive?

  You can access the connection data the P100 HDD external USB HDD to the other computer.
  You could remove the HARD the P100 drive and could insert into an external USB enclosure
  I think that the HARD disk supports the SATA interface, so you have to get a SATA USB caddies

  With regard to the question P100;
  Well, it seems to be a hardware problem, we can only speculate about the type of dysfunction, but for me, it looks like a serious problem
  The best is to contact a technician for laptop and check the single parts

  Good luck