Pavilion dv4 recovery DVD is not recognized at startup

Similar Questions

• DVD is not recognized on Satellite L500-1XJ

  Hi all

  The DVD is not recognized when a dvd was released in the laptop.
  I tried to reinstall the driver but no luck.
  Does anyone have an idea?

  Thank you

  Gunter

  It is not easy to say what the problem is here.
  We don t even know what DVDs you are using.

  Maybe you should write a little more of everything cela and offer some fact and relevant information. You know, for a better understanding.

  Also which driver you have installed again?

• AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

  Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

  Hello:

  See run the resolutions listed in the link below the job for you.

  https://support.Microsoft.com/en-us/KB/314060

  #3 or #5 usually work.

• Pavilion Slimline s5-1020: DVD drive not recognized in Device Manager

  My rarely used DVD player no longer works. Here are the things I have seen/made:
  -J' updated to Windows 10. It may or may not have stopped working before the update.
  -I update Windows automatically, and everything seems to be in order there.
  -The DVD seems to be operational, insofar as you can hear it turn when a disc is inserted.
  -Setup recognizes, and it is enabled; It is not at all in Device Manager or in the file Explorer.
  Based on the things I've tried, there are indications that it may be either a hardware or a software problem (or both?):
  
  SOFTWARE PROBLEM?
  I followed these as much as possible:
  http://support.HP.com/us-en/document/c03370738#c03370738_NoDriveWin8
  http://support.HP.com/us-en/document/c03370738#c01895589_resetpower
  http://h30434.www3.HP.com/T5/desktop-CD-DVD-read-only/read-this-for-CD-DVD-drive-with-burning-Missin...
  
  -I got disconnected/reconnected the drive.
  -J' tried various DVD I knew to do.
  -I don't have to update the BIOS, given warnings.
  - Nor did I mess with registry filters.
  -J' tried to find a Microsoft Fixit solution, but the one referenced somewhere in these pages don't apply to this OS - I think it was for Win 7.  I tried MS Control Panel convenience stores, but none of them worked.
  So I can't say whether or not it is a software problem.
  
  HARDWARE PROBLEM?
  -J' have set the boot on the CD order in configuration and the desktop with Windows 7 HP Pavilion system repair disc - nothing happened, he went straight to the HD (even if I had turned off).  So that leads me to believe it may be a hardware problem after all.
  
  Do I have other options at this point, except maybe buy another drive?  And in fact if I do, it is possible that one does not work either?

  While you are not alone in this problem, here's a thread that deals with her.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/CD-DVD-drive-not-detected-after-upgrade-to-Windows-10/TD-p/5172346

  See if that helps

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• HP Pavilion DV6 DVD disc not recognized and the media player does not work

  My HP DV6 is having... issues.  Windows 7.  A little history:

  Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop.  HP support could not help or Fix - It programs work.  Had to restore it to factory default and that solved THIS problem.

  Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized.  Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.

  Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.

  More?  (Windows Explorer, not Internet) will be often expire or crash...

  I have Norton Internet Security with live update and have yet to have virus problems.

  Any help or questions greatly appreciated!

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit in the programs list.
     
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• CD ROM / DVD drive not recognized and viruses on the computer

  Can anyone help please?
  My CD ROM / DVD Drive failed. I tried troubleshooting etc but not available. The computer does not recognize I have a CD / dvd as a player he says that is not recognized by the register?
  I also have a virus that I can't get rid of, it's maybe part of the problem (Trojan horse - Spy.HTML.Smitfraud.c) I ran many viruses, spyware and trojan controls but there is no cure yet?
  I tried the system recovery, but it won't let me get it back to an earlier date.
  I can't use my restore disk because the computer does not recognize the drive. A catch 22 situation.
  Can anyone offer any other advice that throw it out the window?

  Help from anyone would be much appreciated.
  Concerning
  PG
  "" "" Laptop user frustrated. ""

  [Edited by: admin on 3 July 05 22:11]

  HI Paul,.

  I think that your first priority will be to remove the virus from your laptop. The following link contains the virus details: -.

  http://securityresponse.Symantec.com/avcenter/venc/data/W32.Desktophijack.html

  You are shown in the BIOS to CD-ROM? If yes then set to be the first selectable boot device and you should be able to load your recovery disk and restart it.

  HTH

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

  Hi all

  I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

  I installed the latest BIOS v2.50 as well as the latest Windows patches.

  To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

  I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

  Mounting frame is also OK (tested with the original Toshiba DVD ROM)

  Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
  What is generally a problem

  Thanks for reading my ad and you answers or advice

  Klaus

  Hello

  It won't be very easy get your new work of drive on your S1, I will explain why:

  Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
  their place according to the requirements of the laptop.
  Three settings are available: master/slave/CableSelect

  Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
  a disc factory settings in bulk comes as a disk Primary Master or CS.

  There are two options how to get to missing jumpers to make it work.
  (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
  (2) by a bridge of material on some pins to the back of the drive.

  As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

  As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
  According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

  start of quote:
  Dear Sir.

  The drive is detected beeing as a master drive.
  This setting cannot be changed. Are there no rider to do so.
  How mount you the device to your laptop, it's up to you.
  It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

  Kind regards
  end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

  As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

  Concerning

  chain

• New DVD drive not recognized on my Satellite Pro 4600

  Hi all

  I recently bought an engraver of DVD in NEC ND-6650 nine.
  This drive is NOT recognized by my Satellite Pro 4600 at all - neither Windows 2000 nor in the BIOS (v 2.60). BIOS updates higher than the 2.60 version are not provided.
  Does that mean I can forget about using the new writer in my old notebook?

  Thank you and best regards,

  Nils

  Hi Nils,

  I suspect that your new drive may be not be compatible with your laptop. Like all scanners to your new drive will be configured as slave or master (or CSEL possible), and this configuration should match your laptop.

  Usually your hard drive is configured as master on IDE channel 0 with optical drive is the slave on the same channel device. However, you may find that your optical drive is configured as master on the IDE 1 channel.

  Normally the setting is preconfigured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure they are the same.

  Kind regards

• DVD - ROM not recognized with setting of M/S

  Hello, I just bought a DVD SD-R2412 drive to replace my dead drive (same model). However, my old drive was CSEL type and this news is M/S. I didn't know there were differences in the same model. This new drive is not recognized by Windows XP (SP2) and disappear the second IDE controller. In addition, it is not possible to boot from the CD, so I guess that the BIOS is also not recognize the drive.

  I saw an exchange of views on the reverse (CSEL M/S, new old) and some solutions for this case, but I have not seen all the comments on my problem.

  My guess is that the drive is configured as a slave and the BIOS is not able to recognize in this position. If so, the question would be if there is a way to configure the drive M/S to act as a master.

  Any ideas?

  Thank you.

  Hello

  It will be very interesting to know what unit of Toshiba you have. As far as I know, the drive is already set to slave, but I put now on exactly the position of the rider. However, take a look on the label which is located on the drive. You can find a picture how to affect the small rider master or slave.

  Best regards

• HP Pavilion dv4 1133tx, audio does not

  Hello friends, my name is nihang I just got a computer notebook hp Pavilion dv4 1133tx http://h10010.www1.hp.com/wwpc/in/en/ho/WF06b/321957-321957-3329744-64354-64354-3747826-3814427.html... I downgraded to xp service pak 3 I installed all the drivers, but audio does not work iv done much RND has TRIED to INSTALL MS UAA THEN IDT PILOT BUT IT KEEPS ON GIVING ERROR when I install the idt pilot he says '-output error» ': error-device object does not exist.

  There is 3 ms UAA on the net, I installed all then them tried to INSTALL IDT also it gives the error, and then I serched the forum, I got a response

  "XP 32 bit is difficult for drivers who work on these laptops_64bit is almost impossible."

  You do not Realtek Audio... and there is no driver XP for IDT Audio.Some have used the Vista driver successfully.

  Ms. UAA(required with a reboot before IDT):

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = PSG_I2...

  IDT High-Definition Audio:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-624...

  I tried this too, and then also the same friends mistake plsss help what I do...

  I CANT SEE ANY AUDIO DEVICE IN MY DEVICE EAT MORE THERE ARE 6 EXLAMTION MARK YELLOW ONE BUT IT SAYS DOECENT WICH MATERIAL IS: s REALLY FED UP LOLLLLLLL

  MY USB, CHIPSET, TV TUNER, BLUETOOTH, WIRLESSLAN, LAN etc ALL ON MY DEVICE MANAGER, I CAN SEE his works well... .pls help thank you very much for reading

  by the grace of God, I got my answer my audio and modem works fine pls refer to this thread > > > http://h30434.www3.hp.com/psg/board/message?board.id=OS & thread.id = 230 thank you how tried to help me God bless u.this forum is awesome

• Drve DVD is not recognized in Windows - Satellite P25

  Hello
  IM the owner of the satellite p25 last night somehow got my pirate pc sience then im trying to reinstall my operating system
  but the main problem is that my bios recognize not my dvdr (uj - 830 b) in windows I can see, but I'm not going to see in bios, any ideas how can I boot from a dvd to reinstall my windows?

  Hello

  Why are you suggesting that the drive is not recognized in the BIOS?
  Have you tried different options to boot from the CD?

  Usually if you press the C key immediately after starting the laptop, you should be able to boot from the disc. In addition, you must change the boot order in the BIOS.

  Have you tried to boot from various records as the original CD of Windows?
  Maybe your first CD is corrupt and that's why the drive cannot start.

• DVD / disc not recognized Equium A100

  I recently bought a laptop with Vista installed Equium. On my old pc (Windows XP Home edition), I supported a large number of pictures and files on a DVD disc with nero, when I try to load these on my laptop the drive is not recognized.

  I have a lot of files on the other DVD, these are also not recognized, I would like to transfer these files on my laptop. Can anyone help this?

  Thanks in advance

  Hello

  As you have probably not known, not all CD or DVD is compatible with each drive.
  This means that sometimes the medium cannot be recognized and the Player cannot read or write on CD or DVD.

  In my knowledge in the manual, you should find a list of compatible DVD and CD.

  PS: I use the TDK CD and DVD TDK. I m very satisfied