HP pavilion dv7: computer turns off screen

Similar Questions

• Pavilion dv7: laptop turns off after 40 seconds of not being connected.

  I want to take my laptop on the move without worry about finding an outlit every 40 seconds. I looked through the ' power settings and sleep ' but nothing appeals to my problem. I don't know if it's just something that all the HPs do or if I have a problem. Help, please!

  @marissagi

  HP laptops - test and calibrate the battery (Windows 7)

  http://support.HP.com/us-en/document/c00821536

  REO

• Bluescreen error: bccode 116; computer turns off on the reboot screen everything seems fine.

  Original title: while using the computer turns off on the reboot screen, everything seems fine. received message the last time. Signature of the problem: any suggestions?

  While using the computer turns off on the reboot screen, everything seems fine. received message the last time.

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               116

  BCP1:                                                    863A52A0

  BCP2:                                                    8DC1C152

  BCP3:                                                    C000009A

  BCP4:                                                    00000004

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               768_1

  any suggestions?

  Hello

  Try the procedure described in the following article.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly?

  http://support.Microsoft.com/kb/958233

  In addition, update the drivers for graphics cards and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

  MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

  The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

  If your drive CAN be mounted, start-up continues normally.

  If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

  If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

  I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

• Pavilion dv6 Wireless turn off by itself

  Pavilion dv6 1140ew with Windows 7. Each drivers are up-to-date. The system has been reinstalled recently so no virus is present.

  And that is the problem. The computer turns off randomly wireless features. The blue light on the Power button tab will become Orange, as it has been disabled manually. I can't turn it on again for a while. Sometiems, it requires a reboot to re - activate. I found no specific reason why it happens. There is no model when it occurs. Sometimes during a movie, when the internet is not used at all. Sometimes during a game, online when it is certeinly. It takes 10 minutes to 2 hours to reactivate itself.

  Would appreciate any help, as it is very frustrating.

  Hello Schanez,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your wireless network is disabled and you want to prevent from happening. I'm you provide a document from HP support:laptops HP - Setup to solve Internet connection problems on a wireless network with Windows 7 and, which contains steps to help you solve this problem. I would focus on turn it off device power management section of the options I have installed wireless on below:

  Most wireless devices can be configured to turn off the power to reduce the drain on battery power. This is usually not a problem when the laptop is connected to an AC adapter. However, during battery operation, the adapter can be turned off to save energy. To disable this power setting, follow these steps.

  1. Click on start and enter the device in the search box, and then select Device Manager from the list.
  2. Double-click network adapters to lengthen the list, do a right click on the adapter for wireless (WiFi) in the list and select Properties.
  3. In the map properties window, click the power management tab, and then deselect allow the computer to turn off this device to save power option.

  Close Device Manager, restart the laptop and trying to reconnect to the wireless network.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

  After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

  Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

  I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

  Concerning

  B Odd Andersen

  Hi B Odd Andersen,

  I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

  Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

  Method 2: Change the power to another and check to see if the problem persists
  Change, create, or delete a power plan (scheme)

  Method 3: check the logs in event viewer for more information on auto-off down

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Note: For your safety and security, it is not recommended to disable Windows Update.
  Activate the update or disable automatic

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

  2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use.  I rebooted, but it stopped again.

  The model is that the computer runs for 15-30 minutes, then suddenly stops, the system reboots, runs for 2-3 minutes, stops, restarts, spans less than a minute, stops, restarts, stop after a few seconds, etc., and at that time there I give until the next day when I repeat the same cycle all over.    I have Windows Vista Home Premium 32 bit and it is a model of Dell Inspiron 518.  There is no error message but a beep at startup upward.  I ran Windows repair program 'Start' who did a restore without success.  The problem occurs even in Safe Mode.

  Does anyone have a guess as to what is the diagnosis?  Thank you.

  Hello

  Could be hardware or even heat and ventilation the related. Try using a small fan to increase ventilation. When a PC
  Remove ALL power and reinstall the memory, all cards and cables (do just not shake - remove and replace-)
  cables on both ends where possible).

  As it does in Mode safe so you probably need technical support in a real store of the computer - no Peeks/leeks at BestBuy or other large shopping areas. Very difficult to solve if it does not remain under tension.
  It remains under tension if you start from the disc of Vista?

  -----------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Turning off screen magnification

  I need help turning off screen-enlargement. I don't know how it came even to pass so I have no idea how to turn it off. Does anyone know how to disable?

  Hello
   
   
  1. are you referring to the zoom or screen Internet Magnifier settings explore?
   
  If you are referring to the screen magnifier refer to the steps below.
   
  Disable it in the Control Panel, here's how:
  a. Click Start, all programs, accessories, accessibility and accessibility.
  b. click on make the computer easier to see.
  c. uncheck Turn on Magnifier and click Save.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the mouse turns off screen by far on one side and not the other way

  my mouse turns off the screen along tracks on the right side up to 6 inches of while on the left and up he hits the edge. at the bottom it will turn off screen but only a centimetre or two. I called support but they needed a control on my computer, I was wondering just if theres a way I can fix this without letting someone take on my system.

  If another (additional) monitor has been activated, it will appear on the right side and the mouse can move in this area.  It seems that this could be happening.  Open the display by right-clicking on an empty space in the office, then choose NVIDIA Control Panel or open the ATI Catalyst Control Center, and then check if 2 screens are selected.

• Computer turns off after a minute or two

  Original title: MY COMPUTER has a MIND OF his OWN

  Hello

  My computer turns off if I leave for a minute or two.
  Anyone know how to launch the screen saver and leave my computer on until I stopped it?
  Thank you
  Andrea
  window 7

  Check the energy saving options

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• I was almost finished to fill a very large document when my computer turns off. Is it possible to recover what I had done?

  Original title: Document lost

  I was almost finished to fill a very large document when my computer turns off.  Is it possible to recover what I had done?

  Hello

  What document you worked on?

  Have you worked on all office applications?

  If you are working on a Word document, you can check out the following link and check if that helps.

  http://support.Microsoft.com/kb/316951