Pavilion g6: fan has stopped working

Similar Questions

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• Cool fan has stopped working - laptop HP Pavilion dv7-6c95dx

  The colling fan has stopped working properly. After research, I learned that it is a COMMON problem for this laptop in particular. Of course my warranty just expired 2 months ago... so...

  I need info on this exact model fan, with that I need to replace it, as well as instructions on how to do it. It is a HP design flaw I think personally that you need security regardless, but I know that will never happen... so let me your useful insight in the matter. Thank you very much.

  HP Pavilion dv7-6c95dx laptop

  Here are the specifications of your HP Pavilion dv7-6c95dx Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the specifications and guide, it seems that HP part #666392-001 is the replacement part you need.

  

  Disassembly instructions start on page 41 of the maintenance and Service of Guide.

  Please send BRAVO

• Fan has stopped working on the satellite

  I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

  I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

  How long they tend to take to fix these things?

  Hello

  I put t know 100% if they work on Sunday, but I presume that they don t
  However, can you please tell what camera do you use?

  I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
  So if the fans don't turn you should not turn on the laptop.

  But maybe the cooling modules run only with the lower speed?
  This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

• Satellite Pro 6100: fan has stopped working

  I recently decided to copy out all my data from my laptop and it just stopped. It was very very hot, and the hard drive has not worked since. I put a new disc in and installed the software but it heats up really fast. My question is this all a result of the fan (I can't hear more) stop and is it possible to buy a fan and install it myself - I've already cracked it open and got down to the fan and it looks like dust-free. I am pretty handy and want to do it myself.

  If the fan is originally where can I buy a replacement?

  Hello

  This looks like a laptop computer could overheat.
  If you can't hear the fan or cooling module is bad or there is something wrong with the motherboard.

  In my opinion, the cooling module must be checked and possibly replaced.
  All parts and devices can be controlled from the maintainer authorized Toshiba in your country.

  Just call the guys and order the compatible part or if you have no experience, ask the guy to help him. I think that you should not replace anything by yourself. It may be damaged anything else. The technicians have more experience and can locate and solve the problem much faster.

  Good luck

• speakers of HP pavilion dv6-7020us has stopped working

  My speakers stopped working at some point, but I don't remember programs or updates that may have caused this. I uninstalled everything I know has recently been installed. I ran an update driver for the items pertaining to the audio device manager.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56155.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  If you have still no sound, open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• Satellite A500 - 17 X - Fan has stopped working and the warning message

  As the title says.

  I turned on my laptop today to hear him roar, and then it is simply stopped. I get this warning on every 20-30 seconds:
  WARNING: a problem with the cooling system has been detected. Please turn off the power immediately and return it for service.

  Instead of saying "then put it back in service," I can do to try to fix myself first?

  Thanks in advance

  Mike.

  Hey Buddy,

  Other similar topics I found information that the fan control has been optimized with the latest version of the BIOS. I put t know what version of BIOS you have but most recent, a satellite A500 - 17 X (PSAR3E) is 1, 90 - WIN and can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I hope that helps! :)

• G7 2017 Pavilion: display driver has stopped working and has recovered

  I received this message at least twice this month. In addition, the laptop freezes several times a day. Not sure if the two problems are related. Thanks for any help you provide. Ana

  Hello @Anne47,

  Welcome to the Forums of HP Support!

  I read your post on the issue of the display and wanted to help you!

  Looks like there is a problem with the graphics driver.  First of all, try to review the following document and let me know how it goes:

  HP PC - error: display driver stopped responding and has recovered (Windows 10, 8, 7)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• My HP Pavilion g6 fan does not work.

  I bought a HP Pavilion g6 2230tx a few months back and its cooling fan has stopped working.
  It was working fine, but the problem started when I played Euro Truck Simulator 2 full settings. The cooling fan has been throwing a large amount of heat and the fan was moving quickly, but I continued to play. Later that day, when I turned on my laptop, it showed an error which was: "the system has detected that a cooling fan does not work correctly and continued operation can cause damage.
  Fan system (90 b)'.
  Then I turns off after 15 seconds.
  My laptop is under warranty until 2016-06-16 [YYYY-MM-DD] and the Security category is "guarantee of the factory." {Deleted personal information} & product number is C9L64PA #ACJ. Now my question is that how much HP will take to repair or replace my laptop fan. Will it be free? ;-)
  And I live in India.
  Thanks in advance
  Aniket Chauhan

  Dear Hüffer
  I tried what you say except clean it with compressed air and a paperclip. I'm going to send my laptop for repair and now I hope they'll work again.
  Concerning
  Aniket Chauhan

• HP pavilion n203tx 15: Amd driver has stopped working and has recovered

  Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

  my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

  Thanks in advance

  Hello

  Try this

  install the following in the same order

  Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

  Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

  BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

  Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

• Pavilion g4: apllication of Catalyst Control Center: Host has stopped working...

  I get a pop-up window saying: "Catalyst control centre: host application has stopped working.". "

  It is written in the body of the box: "a problem caused blocking program woring correctly. Windiows will close the program and notify you if there is a solution. "
  
  I can't connect my games online as well. Please give a good solution

  Hello @Sailorswrath ,

  Thank you for your inquiry.

  What is your exact model of the Pavilion G4 you have?

  How can I find my model number or product number?

  There was a recent change before that happened?

  Have you tried running MS difficulty?

  Have you checked against viruses and malware?

  Here is a link to help test for a hardware failure.

  HP Notebook PC - detection of hardware failures (Windows 7, Vista)

  If it is a recent change, you can perform a restore to a well known date?

  HP Notebook PC - using Microsoft System Restore

  Good luck!

• Pavilion dv6 fingerprint reader has stopped working

  My fingerprint reader has stopped working. I can open the Simple pass identification program but when I click on fingerprints, it indicates 'identity check' with an hourglass on the top of the icon of fingerprints, and no matter how long I wait, that's all that happens. All advice appreciated.

  -----------------------------------------

  Pavilion dv6t laptop 3100, Win 7 Home Premium 64-bit, 8 GB of RAM, processor i5

  "Where you go, there you are."

  Hi Mikey,

  Looks like you're running the Digital Persona of SimplePass flavor.

  Two things to consider / try, in order.

  If the reset works, you don't have to reinstall the driver...

  • Hard reset
  • Reinstall the driver

  Hard Reset:

  Sometimes, all you need to do is the computer suddenly.  This method works for a variety of connection and "glued" program issues.

  • Disconnect all the external devices first.
  • Remove the AC power and battery
  • Press and hold the power button while in the minus 30 seconds
  • Reinstall the power supply for the first start only * see Note
  • Power on - connect
  • Next time you shut down the system, replace the battery.

  * Note: You can ignore the little battery aside.  If you wish, replace the battery the first time and do it with her.

  =====================================================================================

  The pilot, from your Internet site:

  Validity fingerprint sensor Driver sp52354 V2.1.0.2

  • Install the validity sensor Driver installation package: it if called sp*.exe - the package will be most likely located in the downloads folder.  If you have control of "Admin", you can highlight the package and "double-click on ' to install it, otherwise just right-click, select"Run as Administrator"and install.

  I hope this helps!

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.

  Good luck!  Year of the Dragon!

• HP Pavilion dv7 6b51ea: GPU stuck at Intel, AMD GPU has stopped working

  A year ago, I received a notification of the CCC AMD the driver update and did. Since then, the 7400 m has stopped working and still did not so after;

  (a) rolling back drivers

  (b) reinstall the drivers from the HP website

  (c) using the system to factory settings restore

  After some research I found that the discrete GPU in HP laptops only works with the drivers offered by HP, but those who fail to solve the problem of too.

  I put Powerplay use Max Performance and even tried to disable ULPS, which of course failed because the system is locked ' dynamic single setting.

  Active power plan still shows as powerful, but it's the GPU integrated in use, not dedicated

  Also recently upgraded to Windows 10, had no problems but GPU problem remains

  AMD Catalyst Control Center poster always I have 7400M and hardware of MSI Afterburner monitoring shows his temperature to 45 c but 0% use of the GPU.

  When running games that allowed, with Powerplay can jump on the 7400 M, still work on the weak integrated Intel graphics.

  HP Support Assistant cannot detect all problems, troubleshooting

  HP Pavilion dv7-6b51ea

  Appreciate the help.

  Thanks for your help, very much appreciated a response.

  Assuming that I am in a bind.

  HP should not make laptops for gamers or those who buy specifically for the use of the dedicated GPU, if they cannot upgrade their GPU drivers dedicated by the manufacturer of this GPU IMO.

  Sister with a DV6 bought with my DV7 (2012) was lucky, I tried the update before she accepted AMD update notification

  Guess I will gift to a parent who does not require the dedicated GPU and I'll have to make sure my next laptop supports the amd/nvidia driver unlike HP updates of course

• Office Pavilion Elite HPE message: AMD/ATI Video Driver has stopped working properly

  I have a Windows 7 Desktop HPE-410y, this morning, that the flag of the action center was at the bottom of the screen.  I clicked on it and there was a message: AMD/ATI Video Driver has stopped working properly.  He also said I should click on a link for a solution to this problem, but of course when I made the site of HP said that the page does not exist.

  Maybe say if you have in fact noticed nothing else Action Center indicator would be useful.  If it seems to you that the computer was OK and run satisfactorly, then perhaps he had already solved the problem.  Usually reviews can occur if a program did unexpected things and crashed the video driver, then the driver recovered.

  HP site can be set to an old page.  The real driver has not been updated recently on the HP site.

• Laptop HP Pavilion 15-P002NP: Igfxtray module has stopped working

  Hello Hewlett-Packard, there.

  This is a new laptop, the problem come after HP Support Assistant update using the number of items and the cause is probably HP SoftPaq SP68117 Version 1.10Ap2

  After reboot, always get a boring box with the following error:

  "Igfxtray module has stopped working".

  Details of the event 8.1 Windows Viewer 64-bit:

  Nome da size falha com: igfxTray.exe, versão: 6.15.10.3574, carimbo of data/hora: 0x535821b3
  Modulo falha com Nome: combase.dll, versão: 6.3.9600.17031, carimbo of data/hora: 0 x 53087867
  Excecao code: 0xc0000005
  Desvio Falha: 0x0000000000005fc4
  Processo falha com ID: 0 x 894
  Inicio Hora da falha com application: 0x01d071899f305884
  Caminho da size falha com: C:\Windows\system32\igfxTray.exe
  Caminho modulo falha com: C:\Windows\SYSTEM32\combase.dll
  Relatório ID: de378e5a-dd7c-11e4-8280-142d27d7b406

  Thanks in advance for your support to solve as soon as possible

  Conclusion:

  Reason of error related to the use of HP Support Assistant HP SoftPaq SP68117 Version 1.10Ap2 (video "update").

  Difficulty:

  The step of the explanation of the step:

  1 search for "Device Manager."
  2. click on "Graphics cards" to open the drop-down list.
  3. write down the name of the driver you have so that you know what it is that you want to reinstall.
  4. right click on the faulty driver and select uninstall.
  5. allow the wizard to uninstall the driver.
  6. restart the computer.

  Check that it is uninstalled:

  7. follow the actions 1 and 2 once again and check that the driver is called something like Windows generic driver.

  8. to reinstall the driver from the HP website (because wasn't sure Intel Graphics specification):

  9. find the correct material using http://support.hp.com/us-en
  10. Select "Solution and Update Finder" install "HP Support Solutions Framework.
  11 installed Intel Graphics Driver selected by the HP software

  Solved!

  Thanks a lot for your incredible support