speakers of HP pavilion dv6-7020us has stopped working

Similar Questions

• HP Pavilion dv6-6b57sa suddenly stopped working and will not now to power on. Help, please!

  OK, so I'm a new student and my laptop has just decided to stop working. I had the laptop for 2 years but I have not used until I came to College. Long story short, I wanted to use it as a working laptop and one im using now for media.

  Anyway, I started the dv6 and it was fine so I jumped to get a coffee. As I got home I heard a click and then the screen was cut off and now it will not turn back. I tried the hard reset, take out the battery for 15 minutes. The battery charge indicator does not come on either. I use an original HP charger and have connected it to a plug adapter multiple with an influx of cutting on it.

  No LED, no noise, no charge indicator. Can someone help me with this, extremely upset I've saved this laptop for her than to die in the first week.

  Not sure, but there's less chance of it. Given that the laptop is not put under tension with other adapters. You must take it to store to get the verified motherboard.

• Pavilion g6: fan has stopped working

  Well, I posted something here last week, but no answer came.

  In the meantime, my laptop fan has completely stopped working. It overheated a few hours and it wound up out there, but now it is cooled, it works again.

  I'm afraid that overheating will happen, so I wonder what I can do to make sure that it doesn't happen again.

  My laptop has 2.5 years and before the problems with the fan, it worked perfectly fine.

  What can I do? My laptop is kind of my everything, at least for my school work.

  Thanks for your reply. I wanted to tell the fan, I suppose, made a mistake in translating from Dutch to English.

  Anyway, I contacted the Dutch customer service and repair their partner is very likely to replace the fan.

  Thanks anyway

• G7 2017 Pavilion: display driver has stopped working and has recovered

  I received this message at least twice this month. In addition, the laptop freezes several times a day. Not sure if the two problems are related. Thanks for any help you provide. Ana

  Hello @Anne47,

  Welcome to the Forums of HP Support!

  I read your post on the issue of the display and wanted to help you!

  Looks like there is a problem with the graphics driver.  First of all, try to review the following document and let me know how it goes:

  HP PC - error: display driver stopped responding and has recovered (Windows 10, 8, 7)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• Pavilion dv6 fingerprint reader has stopped working

  My fingerprint reader has stopped working. I can open the Simple pass identification program but when I click on fingerprints, it indicates 'identity check' with an hourglass on the top of the icon of fingerprints, and no matter how long I wait, that's all that happens. All advice appreciated.

  -----------------------------------------

  Pavilion dv6t laptop 3100, Win 7 Home Premium 64-bit, 8 GB of RAM, processor i5

  "Where you go, there you are."

  Hi Mikey,

  Looks like you're running the Digital Persona of SimplePass flavor.

  Two things to consider / try, in order.

  If the reset works, you don't have to reinstall the driver...

  • Hard reset
  • Reinstall the driver

  Hard Reset:

  Sometimes, all you need to do is the computer suddenly.  This method works for a variety of connection and "glued" program issues.

  • Disconnect all the external devices first.
  • Remove the AC power and battery
  • Press and hold the power button while in the minus 30 seconds
  • Reinstall the power supply for the first start only * see Note
  • Power on - connect
  • Next time you shut down the system, replace the battery.

  * Note: You can ignore the little battery aside.  If you wish, replace the battery the first time and do it with her.

  =====================================================================================

  The pilot, from your Internet site:

  Validity fingerprint sensor Driver sp52354 V2.1.0.2

  • Install the validity sensor Driver installation package: it if called sp*.exe - the package will be most likely located in the downloads folder.  If you have control of "Admin", you can highlight the package and "double-click on ' to install it, otherwise just right-click, select"Run as Administrator"and install.

  I hope this helps!

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.

  Good luck!  Year of the Dragon!

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• HP Pavilion dv7 6b51ea: GPU stuck at Intel, AMD GPU has stopped working

  A year ago, I received a notification of the CCC AMD the driver update and did. Since then, the 7400 m has stopped working and still did not so after;

  (a) rolling back drivers

  (b) reinstall the drivers from the HP website

  (c) using the system to factory settings restore

  After some research I found that the discrete GPU in HP laptops only works with the drivers offered by HP, but those who fail to solve the problem of too.

  I put Powerplay use Max Performance and even tried to disable ULPS, which of course failed because the system is locked ' dynamic single setting.

  Active power plan still shows as powerful, but it's the GPU integrated in use, not dedicated

  Also recently upgraded to Windows 10, had no problems but GPU problem remains

  AMD Catalyst Control Center poster always I have 7400M and hardware of MSI Afterburner monitoring shows his temperature to 45 c but 0% use of the GPU.

  When running games that allowed, with Powerplay can jump on the 7400 M, still work on the weak integrated Intel graphics.

  HP Support Assistant cannot detect all problems, troubleshooting

  HP Pavilion dv7-6b51ea

  Appreciate the help.

  Thanks for your help, very much appreciated a response.

  Assuming that I am in a bind.

  HP should not make laptops for gamers or those who buy specifically for the use of the dedicated GPU, if they cannot upgrade their GPU drivers dedicated by the manufacturer of this GPU IMO.

  Sister with a DV6 bought with my DV7 (2012) was lucky, I tried the update before she accepted AMD update notification

  Guess I will gift to a parent who does not require the dedicated GPU and I'll have to make sure my next laptop supports the amd/nvidia driver unlike HP updates of course

• HP pavilion n203tx 15: Amd driver has stopped working and has recovered

  Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

  my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

  Thanks in advance

  Hello

  Try this

  install the following in the same order

  Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

  Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

  BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

  Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

• Pavilion g4: apllication of Catalyst Control Center: Host has stopped working...

  I get a pop-up window saying: "Catalyst control centre: host application has stopped working.". "

  It is written in the body of the box: "a problem caused blocking program woring correctly. Windiows will close the program and notify you if there is a solution. "
  
  I can't connect my games online as well. Please give a good solution

  Hello @Sailorswrath ,

  Thank you for your inquiry.

  What is your exact model of the Pavilion G4 you have?

  How can I find my model number or product number?

  There was a recent change before that happened?

  Have you tried running MS difficulty?

  Have you checked against viruses and malware?

  Here is a link to help test for a hardware failure.

  HP Notebook PC - detection of hardware failures (Windows 7, Vista)

  If it is a recent change, you can perform a restore to a well known date?

  HP Notebook PC - using Microsoft System Restore

  Good luck!

• Cool fan has stopped working - laptop HP Pavilion dv7-6c95dx

  The colling fan has stopped working properly. After research, I learned that it is a COMMON problem for this laptop in particular. Of course my warranty just expired 2 months ago... so...

  I need info on this exact model fan, with that I need to replace it, as well as instructions on how to do it. It is a HP design flaw I think personally that you need security regardless, but I know that will never happen... so let me your useful insight in the matter. Thank you very much.

  HP Pavilion dv7-6c95dx laptop

  Here are the specifications of your HP Pavilion dv7-6c95dx Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the specifications and guide, it seems that HP part #666392-001 is the replacement part you need.

  

  Disassembly instructions start on page 41 of the maintenance and Service of Guide.

  Please send BRAVO

• Need help with my hp pavilion dv6-7020us keyboard. :(

  I was wondering if anyone knew if the Hp Pavilion dv6-7020us possesses a light to the top of the keyboard? I tried to use f5 already, but it does not work. This is what it says to do on the user guide, but I'm not having any luck. Anyone know?

  Your laptop does not have a backlit keyboard in accordance with the published specifications.

  My notebook of HP Envy17-3002ea replacement only and to the specifications, it is described as full-size backlit with proximity sensor Radiance. Your care of keyboard are not described as keyboard Island full size with pad, so no backlit keyboard.

• HP Envy dv6 7200 CTO: has stopped working

  Hello world.

  I have a problem with a stopped working error. When I opened the call of duty 4 Multipalyer and play for 5 to 6 minutes (sometimes up to 15 min) it give stopped working error (iw3mp.exe has stopped working). I use coolpad for the laptop to control heat. and I try these solutions:

  1 turn on the stereo mix

  2. put the socket for headphones

  3. put the microphone jack

  4.mssmp3. ASI-> mssmp3.bak

  and my problem not solved. Now what can I do with this error and my laptop?

  Thank you.

  HKN

  Hello;
  
  Let me welcome you on the HP forums!
  
  Sorry, but it's just a volunteer community support forum and we have no possibility for debugging problems with third parties (i.e., no HP) applications.
  
  For help with COD4, yout best bet is to see if the game provider has a support forum and post your concerns there.  You are more likely to help in this way.

  On an overheat, here are a few troubleshooting steps you can try: HP laptops - reduce the heat inside the PC to prevent overheating. HP® customer support

  Good luck

• Office Pavilion Elite HPE message: AMD/ATI Video Driver has stopped working properly

  I have a Windows 7 Desktop HPE-410y, this morning, that the flag of the action center was at the bottom of the screen.  I clicked on it and there was a message: AMD/ATI Video Driver has stopped working properly.  He also said I should click on a link for a solution to this problem, but of course when I made the site of HP said that the page does not exist.

  Maybe say if you have in fact noticed nothing else Action Center indicator would be useful.  If it seems to you that the computer was OK and run satisfactorly, then perhaps he had already solved the problem.  Usually reviews can occur if a program did unexpected things and crashed the video driver, then the driver recovered.

  HP site can be set to an old page.  The real driver has not been updated recently on the HP site.

• Laptop HP Pavilion 15-P002NP: Igfxtray module has stopped working

  Hello Hewlett-Packard, there.

  This is a new laptop, the problem come after HP Support Assistant update using the number of items and the cause is probably HP SoftPaq SP68117 Version 1.10Ap2

  After reboot, always get a boring box with the following error:

  "Igfxtray module has stopped working".

  Details of the event 8.1 Windows Viewer 64-bit:

  Nome da size falha com: igfxTray.exe, versão: 6.15.10.3574, carimbo of data/hora: 0x535821b3
  Modulo falha com Nome: combase.dll, versão: 6.3.9600.17031, carimbo of data/hora: 0 x 53087867
  Excecao code: 0xc0000005
  Desvio Falha: 0x0000000000005fc4
  Processo falha com ID: 0 x 894
  Inicio Hora da falha com application: 0x01d071899f305884
  Caminho da size falha com: C:\Windows\system32\igfxTray.exe
  Caminho modulo falha com: C:\Windows\SYSTEM32\combase.dll
  Relatório ID: de378e5a-dd7c-11e4-8280-142d27d7b406

  Thanks in advance for your support to solve as soon as possible

  Conclusion:

  Reason of error related to the use of HP Support Assistant HP SoftPaq SP68117 Version 1.10Ap2 (video "update").

  Difficulty:

  The step of the explanation of the step:

  1 search for "Device Manager."
  2. click on "Graphics cards" to open the drop-down list.
  3. write down the name of the driver you have so that you know what it is that you want to reinstall.
  4. right click on the faulty driver and select uninstall.
  5. allow the wizard to uninstall the driver.
  6. restart the computer.

  Check that it is uninstalled:

  7. follow the actions 1 and 2 once again and check that the driver is called something like Windows generic driver.

  8. to reinstall the driver from the HP website (because wasn't sure Intel Graphics specification):

  9. find the correct material using http://support.hp.com/us-en
  10. Select "Solution and Update Finder" install "HP Support Solutions Framework.
  11 installed Intel Graphics Driver selected by the HP software

  Solved!

  Thanks a lot for your incredible support