Pavilion HPE-180 t: Compatible replacement hard drive

Similar Questions

• HP Pavilion dv6-6060ep: question to replace HARD drive

  Hello.

  I would like to know if replacing the current 500 Gb Hdd with a SSD would cancel or in any way affect my warranty coverage. The laptop is a year old. Thanks in advance for any assistance of withy this question.

  Hello:

  There should be no problem with the warranty as long as you don't break something trying to install the HARD drive.

  HP will not support the SSD however and your recovery disks don't work because the new drive must be the same size the 500 GB HARD drive you removed.

  I have a workaround for the problem of recovery disk...

  According to the specifications of your PC system, it came with W7 Home Premium 64-bit.

  It must be in English, French or Spanish version too.

  If so, download the ISO W7 Home Premium 64 bit on the link below.

  Burn the file on a disk using a program that can burn ISO files so the DVD is bootable DVD burning.

  Burn at the lowest speed as possible.

  Then use the product key 25 character on the bottom of your laptop computer to activate the installation.

  Support of your laptop and driver page visit to install all the drivers you need.

  Link to downloads of MS of W7.

  http://www.mydigitallife.info/official-Windows-7-s p1-iso-of-digital-River.

  Link to the support page and the driver of your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=5079222&CC=US&DLC=en&LC=en&os=228&Query=dv6-6060ep%20&sw_lang=&Tool=

  Paul

• Replacing hard drive HP Pavilion g4-1015dx

  I recently acquired a HP Pavilion 1015dx g4 with a failing hard drive.
  
  I was wondering if this computer supports SATA III drives specifically the

  Western Digital laptop bare drives 500 GB WD Blue SATA III 5400 RPM 8 MB Cache Bulk/OEM hard drive WD5000LPVX
  
  Thank you!

  Here is the Service Manual:

  Manual

  See page 51 for hard drive access. Note the connector that connects the bare hard drive to the motherboard. You will need to reuse the parts caddy/connector/mylar shield from the old drive.

  Your laptop SATA ports are SATA II. In most cases, if it doesn't have USB 3.0, it also doesn't have SATA III. Your don't have any USB 3.0. However, SATA-III hard disks 2.5 inches wide and 7 or 9.5 mm thick will work fine. SATA III interface is backward compatible with SATA-II.  I guess that you have chosen the WD Blue 5400 RPM drive due to their low cost, but it would be well worth an extra 10 or $15 to have a disk of 7200 RPM like the WD Black or this one:

  http://www.Newegg.com/product/product.aspx?item=N82E16822145587

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Replacing hard drive on HP Pavilion dv6700, must be 2.5 "?

  I have a Pavilion DV6700 HP laptop.  The hard drive is running out.  I need to know if I SHOULD replace the "320GB SATA hard drive - 5 400 rpm, 2.5 in. form factor, 9.5 mm thick" with another disk of 2.5 inches?

  Out of all these details with the player (RPM, 9.5 mm thick form factor of 2.5 in) those who MUST be included in the replacement drive?  Can I install a 3.5 inch drive?

  Thank you

  Hello

  To answer your questions in order.

  1. the speed can vary - that is to say, you could install a 7200 RPM 320 GB hard drive.

  2. in view of the size of your drive Bay, you will need a drive of 9.5 mm.

  3. the Player must be 2.5 "-a disk 3,5 '' HARD is for a desktop PC.

  Kind regards

  DP - K

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• Pavilion HPE 180 t, added third HD on Bay 4 in 5.25 SATA but win7 sees it as a DVD.

  I added the third hard drive to my Pavilion HPE 180 t on 3 SATA 5.25 Bay but win7 sees it as a DVD.  How can I do recognize this feature added as a third hard drive?  I have two HD in the bays of HD SATA 1 and 2 for RAID 0.

  Thanks for anyone who can help.

  Hello

  What is the make and model of drive you added? You you directly connected the hard drive the sata motherboard 3 or 4 port? 4 indicates it the title, but the post 3.  HP cables usually the DVD/CD drive and the motherboard 3 sata port.

  Boot in the bios (F10 at startup). The bios sees the new hard drive? If not, then the drive is DOA or there is a power problem.

  If the bios recognizes the new hard like a hard drive, then try the suggestion below.

  Go to--> disk management computer management and expand the screen entirely.  How many hard drives you see?  Post a picture of this screen.

  If the new drive has never been initialized, then you'll need to format/initialize it by right mouse clicking on the new drive and then format/initialize and assign a drive letter.

• This copy of windows is not genuine after the replacement hard drive and recovery system

  I was running factory installed windows 7 Home premium in my laptop hp pavilion dv6 6119tx. Due to hard drive crash I replaced with new HARD drive.  Previously, I did system image backup using easeus todo backup and recovery softeware. After system recovery with the same software, this massage flasehes "this copy of windows is not genuine". I tried to enter the key of product at the back of the laptop but it says invalid.
  I ran diagnstic windows validation tool. him as a result is below.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4ab
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CA180260-1211-48DB-834C-4805A4594053} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.111118 - 2330
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CA180260-1211-48DB-834C-4805A4594053}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1883088055-1570218021-1659234768Hewlett-PackardHP Pavilion dv6 Notebook PCHewlett-PackardF.1B20111005000000.000000 + 0002BFD3F07018400FE40090409India Standard Time(GMT+05:30)03DELL QA09 100100Microsoft Office Enterprise 2007126DF6616C522F5867l28mQpHyGN4/v7tLnJzLV + ZnKQ = 89388-707-5082974-6591914

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-16393-7601.0000-0552012
  Installation ID: 010735456091822376148725581093255175938323439855115461
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 1
  Trust time: 10/07/2012 10:49:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4AB
  Beyond: PASS
  Event timestamp: 10:7:2012 10:46
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: OAAAAAEAAQABAAIAAAAGAAAAAgABAAEA6GGaTIaqGKMieFCbUkhwn9QjphiojRKp0gzcQQzDLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HP APIC INSYDE
  HPQOEM FACP SLIC-MPC
  HPET HP INSYDE
  START HP INSYDE
  MCFG HP INSYDE
  ASF!            HP INSYDE
  QA09 DELL SLIC
  SSDT HP INSYDE
  ASPT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE

  Help, please

  Code of Validation caching: 0xc004c4ab

  
  
  Windows has detected the presence of a feat of activation as evidenced by the presence of a table of slic of Dell on a HP computer.
  You need to install windows genuine.

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• replacement HARD drive for dv7

  I have a Pavilion dv7 and I need to replace the HARD drive, I searched online for a replacement hard drive for her but I'm not sure of the good replacement of hard drive I need. service number is .theres dv7 - 1237cl a lot of picks and I used to make sure that I get the good Hdd but I don't want something cheap. what I have now, it's 500 gb Hdd and 4 GB ram upgrades I can do would be helpful too. I have 5 Hps and this my favorate a .i woild be thankful for any Hiep.

  Thank you very much for yor assistance I'm buyin the hybrid drive today and I will continue the ram as is for now and upgrade later. Once again thank you

• A100 replacement hard drive

  I saw the other posts on this but no definitive answer.
  My HARD drive is dying and needs to be replaced. I see the posotion from the LHS is under the Palm drive and there seems to be one removable flap - other posts say there is only one screw to remove, but there is no visible screws under the machine.

  I've changed hard disks on other Toshibas with absolutetly no problem - someone at - it ideas?

  Hello

  Replace HARD drive on this laptop is not simply the procedure. I'm not 100% sure, but the entire Palm rest/Touchpad should be removed first. HARD drive cover is fixed with a screw, but you'll see him only if the Palm is deleted.

  When this screw is removed, hold the HARD drive tab and pull the HARD drive bracket. Next step is to detach the HARD drive from the HARD drive support.
  The device is quite new and first of all, check if the warranty is still valid.

• NB100 - replacing hard drive

  How to replace hard drive Toshiba NB100

  Can someone help me?

  TY

  Sergio

  Post edited by: faggiano

  It is not so easy to change the HARD drive on this model.
  You have to remove many parts like keyboard, screen, cover and screw a lot.
  It's a little tricky, so you should have experience with this.

  As Akuma, go to a local ASP (authorized service provider) has said. They can help you replace the HARD drive.

• Satellite L300D-10 q recovery DVD Can be used on the replacement hard drive?

  Hello

  I was wondering if the DVD Recovery allows to install Vista on a replacement hard drive? The original hard drive is too small at 160 GB contain all the files that I use the virtual operating system image. The disk hard 500 GB of replacement must be large enough for that.

  The reason why I need to Vista, it's that the 32-bit and 64-bit versions of Ubuntu 8.04.1 and 8.10, cause the fan to run at full speed all the time which is very annoying. So for the moment I can only use Linux in a virtual machine.

  I intend to stay with Toshiba, though, as my two latest portable Toshiba Satellite a PII and a PIII still work today, and both have had Linux on them.

  Now, back to my story, I intend to remove the existing laptop, hard drive use DVD recovery to install to external USB 500 GB disk, replace the existing hard drive in starting up the laptop from the USB and copy my data overall. Before you reformat the old drive as external storage, I will replace in the laptop with 500 GB drive and the test so I can boot from the new drive.

  Key question will be the change of equipment, i.e. the new hard disk of 500 GB prevent Vista to install or activate?

  Thank you very much

  Vista itself can handle huge HARD drive sizes, but the question is: the recovery disc will be happy with 500 GB? The laptop will recognize 500 GB?

  I think it will work very well, because the new laptops are released with 320 HARD drive. 500 GB is not far.

  Its a few trial and error unless anyone here has tested a disc 500 GB HARD themselves.

• El Capitan compatible external hard drive?

  I have a Macbook Air with OS Elcapitan 10.11.3. I want a recommendation compatible external hard drive. I heard that some external dives have"problems" with El Capitan.

  I am a tech and have a large selection of discs between my personal and professional materials. Each external drive, I have worked with El Cap. In general however I avoid external drives Western Digital WD uses owners chipsets that are sometimes not completely compatible with Apple technology. I have a couple Seagate, Toshiba and IOmega readers of 'ready made '. As I said, they all work with El Cap.

  I prefer to create my own OWC external systems or IcyDock enclosure. I tend to buy bare drives HGST, Toshiba and Western Digital these days. My speakers are for backups and a multimedia disc of high quality is very important. I tend to buy Server nu class disks. I prefer to make my own because it gives me total control over quality enclosure recognized with a standard chipset in the industry and also a known internal drive. When I didn't buy an external 'ready made' I have no idea what is inside or who did the speaker. At this moment I have USB 2 and FireWire speakers that are 5-8 years and still going strong (even if I swapped drives several times over the years). I don't think that I have a single 'ready made' disc, which is close to that age.

• HP ENVY 14 2020NR: need a recommendation for a replacement hard drive

  Greetings,

  I have an a HP ENVY 14 2020NR with a hard drive died. Blue several screens before the new year, did a complete system restore, which seemed to have fixed things. Unfortunately, after 10 days the blue screens are back. The unit is several years old, and my next step is to replace the hard drive. I have all the data backed up elsewhere and ready DVD restore disc.

  Here are the specs of the drive:

  Hitachi disc HARD 7 K 750-750. P/N H2T7501672S.

  I am trying to identify the right replacement hard drive. Looks like it was 750 GB at 7200 RPM. Some choice out there. Can anyone recommend the correct replacement hard drive?

  Thanks in advance!

  DaniBoy

  Based on the laptop HP ENVY 14 - Maintenance Service Guide, it seems that your computer supports the following readers and more.

  6.35 cm (2.5 in) hard drives (HD) and the SSDS (SSD), 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in)
  Customer-accessible
  Serial ATA
  Supports the following hard disk configurations:
  ● 750 GB (7200 RPM)
  ● 640 GB (7200 RPM)
  ● 500 GB (7200 RPM)
  ● 320 GB (7200 RPM)

  Supports the following simple SSD drive configurations:
  ● 128 GB mSATA,
  ● 80 GB, mSATA
  ● 160 GB, SATA

  According to the above information, any hard disk 2.5 "SATA or SSD of 9.5 mm and 7.0 mm profile should work fine. This includes the newer readers who are more capacious.

  Please see Newegg - internal laptop hard drivesfor a few recommendations of HDD and Newegg - internal SSD for a certain number of decent SSD.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.