HP Pavilion Sleekbook 15-b000: my laptop makes buzzing noise

Similar Questions

• Pavilion Sleekbook 14-b000: try to install win7 64 bit

  Hey all, uh I got a "hp Pavilion sleekbook 14-b013au" to fix/installation of the new operating system, on, with a formatted hard drive, none of the scores of original disc hp exist.

  They had the hard drive out, he reformatted into partitions of 2 x 250 GB and tried to install win7 64 bit on it, without success.

  They tried to hook up the hard drive on a pc, installed the operating system that way, then tried plugging it back into the Sleekbook and should work.

  They won't win 8.1 back on it.

  I have a copy of work of this OS to a flash drive (used the "Windows USB/DVD Download Tool" to create a bootable flash drive).

  I am unable to install this, as the laptop will not recognize the flash drive, after that Windows Setup starts. Help, please

  Hello:

  I have a few suggestions...

  1. you must ensure that the secure boot is disabled and legacy mode is enabled in the BIOS to be able to install and run windows 7.

  2 make sure the flash drive is plugged into a USB2 port.  It will not work on all USB3 ports.

• Pavilion Sleekbook 14-b000: unable to connect after update

  Hello.. I'm at my wits end trying to "fix" this problem of mine.
  It all started when I got a Ransomeware virus, I downloaded some antivirus software (AVG, kaspersky, Malwarebytes) to remove the virus from my laptop. He worked in a way if my files are gone. I read on a site that I have to reformat my laptop to completely eradicate the virus. So after that Kaspersky did a complete and all analysis, I got an update from Microsoft. Without thinking too much, I clicked on "update & Restart', which was a big mistake I guess... the patch was fine til he was stuck or frozen for 6 hours... looked up Google again and I just did a hard reboot for it. Laptop was fine again til when I tried to uninstall Kaspersky, when suddenly the blue screen appeared with a sad smile, saying: you need to restart... and I clicked on restart. After the reboot, I was sent to the usual display of the Date and time before entering the login screen. That's when I noticed now that my keyboard, touchpad and external mouse doesn't seem to work. I couldn't connect anymore. Looked up on Google on top of many sites for this correction... seems simple enough... all I had to do was either do a system restore, refresh or Reset... you all one by one... and none of them worked. Could not do a refresh or back to zero because the message says I have no drive partition or something and my drivers are blocked... System Restore didn't work cos the message said that an Antivirus program blocked or something and that I should uninstall it antivirus software FIR... But I can't connect even in safe mode... and I checked if it's just like the keyboard material that gives me this problem... It's not like I tested it in the recovery menu or something... can't remember I'm so tired
  So now I'm stuck with a brick of a laptop that only shows me the time and date of the day... I don't know what else to do... and I'm not a computer person... so I hope there is a way to fix this big mess...
  And thanks for reading the whole problem of long breath of my friends... I'm sorry.

  Have you tried a system recovery? See section-"recovery when Windows does not start correctly:

  http://support.HP.com/us-en/document/c03489643#n144

• Satellite A500-1EJ - charger makes buzzing noise

  Hello world

  I have a Satellite A500-1EJ. A few months ago the original laptop computer charger died on me, so I bought a Spanish new from Amazon.
  Also, I bought a new battery and they worked perfectly until last week. Of fact changer this buzzing when it is connected (same as previous). As the charger and the battery are original I have tried to find a way to get a replacement but can't find anything on cell phone chargers.

  Could you please help me with this? Amazon said I need to contact the manufacturer of the product.

  Hello

  Purchased Toshiba AC adapter original with PA3716E-1AC3 part number?

• Re: My laptop makes a lot of noise

  Hi, my name is Akram, I come from the United States of America.

  I got this Toshiba laptop last year, I have all the details it s bought in the UK and sold in Saudi Arabia.
  Recently, since a month since my laptop makes a lot of noise can be the fan or the transformer.
  I'm a medical student, I t really know.

  The noise is so boring that I put t carry the laptop to the library or College. Everyone in my class knows once I have started using my laptop if I take it, irritated by all the comments made by my friends. I took the laptop for repair, somehow, I browsed your site and received your Toshiba repair depot.

  As I was in warranty until last week, I went to computer services of DATA VISION, 39th street, New York City, but to add to my problem the people he said he just cleaned up and said what he of done. But the problem is the same.

  I had to go again, then he said that all laptops Toshiba make these noises. Isn't annoying to know this?
  If it true s all Toshiba laptops make these noises, I beg you literally.

  Please, make not of the more portable, it s really annoying to know and just Fellows try to convince me.
  Nothing is managed best by Toshiba. I'm if unfortunate and disturbing why buy it.

  There is no management what so ever.
  Thanks I hope someone will never correct the problem, you can contact me on my mail id '[email protected] or [email protected] '.

  Hi mate

  Welcome to our community of small notebook

  Firstly if you are talking about a Toshiba laptop then you should post some details about your laptop. Who needs to know which model you have?

  Second, I don't know what sound you hear you noise which is create by module cooling fans?

  Just a comment in this regard:
  > As I was in warranty until last week, I went to computer services of DATA VISION, 39th street, new york city, but to add to my problem people there said he just cleaned and said its done. But the problem is the same. I had to go again, then he said that all laptops Toshiba make these noises.

  I put t know if it s your first computer laptop or not, but if you're talking about the noise created by the cooling fan, then you must know that you would hear on all laptops cooling fans!
  If the heat dissipation is higher, then the cooling modules must run faster and so the noise could be stronger. But you can also reduce noise if you define the CPU and modules cooling to a lower return. This may be down to the energy economy of Toshiba.

  I have had three different notebooks from Toshiba in the past. Now I have Satellite U400 and I'm happy. Of course, I can hear the fans running but that's nothing unusual.

• IDL audio driver on my HP Pavilion Sleekbook laptop problem. Sound does not work

  Hi, I have a HP pavilion Sleekbook 14-b029au and my sound does not work. I can't control the speakers of keyboard.

  I clicked on the "speaker" icon on my computer and it says that "no audio devices are installed." I went and downloaded an IDL HD Audio CODEC file on the HP site, but when I tried to install it, it failed. Now, when I have the audio troubleshooting it is said that "IDL HD Audio CODEC has a driver problem" and "hardware changes are not detected.

  Help!

  Hello fm111,.

  I would like that you can use the Recovery Manager and restore your drivers and software.  Follow the troubleshooting steps and then let me know if it helps to solve your sound problems.

  Good luck!

• Pavilion Sleekbook 15 will display the menu boot usb. Restarts continuously.

  Hello

  I have a HP Pavilion Sleekbook 15 (model: 15-b022es) in which I am tryig to install Linux.

  Since the day that I bought it, I was unable to boot anything directly via USB. I searched a lot on this subject, and the usual causes are order secure boot devices to boot, or Legacy Support options. This certainly isn't the case, since I tried all possible combinations. In fact, the exact symptoms that presents my laptop are not described anywhere I've found. What is:

  If I insert a USB drive into any port of the laptop, it makes the computer completely unable to boot. It is not that it freezes, it restarts again and again, but never goes beyond a black screen and make a few sounds HDD (usual start of sounds, nothing weird). In this State, with again inserted USB, I can access the configuration of the BIOS by pressing F10, but can't access devices (usually available at F9) Start menu, because pressing F9 just causes a new reboot.

  In the past I've accessed the start menu do not insert any USB and then pressing F9 then I walked into the USB port, entered and left some folder random to force a refresh of the display (and therefore show the USB) and finally selected my USB. It's a bit hacky and I can cease to apply this solution, as my HARD drive is now cleared and there is no file I can enter to refresh the screen and display the USB.

  Now the thing is: I can not install any operating system to my laptop if I can't boot from USB, so how can I do? For now, all I get are continuous resets the machine before you get to the boot menu.

  And what is the cause of all these resets? Maybe if I go out, I can imagine a way around this problem.

  Thanks for the quick reply, but this isn't the problem, I had already tried.

  I can handle the start menu until I do not start the computer with a USB stick inserted. If I insert one, it will prevent F9 to enter the boot menu, causing the machine to restart again indefinitely.

  However, after having tried everything I could think of (even different file formats in diferent USB drives and for different configurations of BIOS), I went paranoid and I tried with every USB that I have at home.

  I was able to start successfully with a Toshiba 8 GB fat32-formatted USB key (I tried with other pendrives fat32).

  So, finally, it seems to me that it is a bug in my computer EFI firmware. In the first place, the incomplatibility seems to be a bad transposition a standard on the side of various manufacturers of USB key or on the side of HP. But in any case, continuous restarts instead of an information on the error message (as happens for some other errors) seems to be a bug to me behavior.

• HP Pavilion Sleekbook 15-b104s: Sleekbook HP 15 - Touchpad Synaptics with Windows 10

  Hi all!

  I will try to be as brief as possible.

  Yesterday, I upgraded from 8.1 to win to win 10 on my Hp Pavilion Sleekbook 15; everything seems to work pretty well, except for the Synaptics touchpad.

  First Win10 start I notice scrolling is reversed (Mac style) and Synaptics touchpad icon had disappeared from the status bar. Not a big deal: I go in settings and as usual, disable "reverse scrolling" and activate the icon back to the status bar.

  It works like a charm, and I think I've sorted it.

  However, after reboot, the icon disappeared again from the Board and my touchpad is reversed again. For how I try, it always comes back to the defaults after restarting.

  Enable/disable the touchpad, unistalling and re - install the updated drivers do not resolve the issue.

  So I open regedit, to try to change channels manually.

  The string 'TrayIcon' was easy to find: value passed under '0' to '1' and the icon magically appears and always remains in the status bar. Inverted AX drives me crazy.

  I couldn't find any string on the inverted scrolling, and the only way to change it is manually whenever I restart my laptop. Can anyone help with this?

  I think that the only ways to solve this problem would be to replace the string correspondent in regedit (to keep uninverted for, as with the icon in the status bar) or change something to make these changes saved after reboot.

  Any help is appreciated! Thank you very much!

  Quick update of people.

  Thanks for the link I temporary solved the problem! I got my driver for the touchpad, version 19 to 18.

  Here is the link: http://support.hp.com/ee-en/drivers/selfservice/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118#Z7_3054ICK0K8UDA0AQC11TA930O2

  Now the settings remain saved after restarting too.

  Thank you all! If all goes well they'll fix with the next update.

  Mike

• Pavilion Sleekbook 15-B142DX memory upgrade

  Hello, I recently bought and installed an upgrade of DDR3 4 GB memory for my Pavilion Sleekbook 15-B142DX. It is PNY PC3-10666, chip of 4GB which says it's compatible with 1333 MHz and 1066 MHz I booted the laptop after the installation of the new chip, but reports still 4 GB of physical memory, msinfo and other online tests. Yet once, I opened the computer suspect that the chip was not fully connected. While there, I pass the tasks of the 1st round and the new stick. The computer registers yet only 4 GB of physical memory. Did I buy an incompatible chip or it's probably another problem?

  Thanks in advance.

  Hi Paul,.

  I received a HP technical support solution. The chipset you recommended works very well (thanks again). Here is the solution, in case anyone has the same problem with this model:

  (1) I removed the new chipset

  (2) I started the computer and went to menu BIOS setup > Boot Options > Secure Boot (those may not be the exact names)

  (3) switched start safe for people with reduced mobility.

  (4) reinstalled the new chipset

  (5) on the machine

  (6) checked to make sure that the computer record 8 GB

  (7) turned Secure Boot on

  Ensure that the computer has saved 8 GB 8) Made

• Pavilion Sleekbook 15-b003sm: Pavilion Sleekbook 15-b003sm processor and upgraded graphics card.

  Hello

  I should probably start by listing the specs of the laptop. So here it is:

  Model: Pavilion Sleekbook 15-b003sm

  Series: [personal information]

  Product: C6T29EA #BED

  Processor: Intel Core i5-3317U (1.7 GHz)

  Memory: 8 GB RAM

  Graphics card: GeForce GT 630 m 2 GB memory

  OS: Windows 7 x 64

  So the question, well not really a problem, but recently I have noticed that my laptop has been strugling to run the latest games coming out to the point where some games even on setting him down still have very low FPS.

  Then I thought to replace my CPU and graphics card because these two seem to be the issue.

  Now, I got the user guide but it was provided on a CD while my laptop is not a CD ROM  So, I have been unable to determine what kind of a slot processor use my laptop.

  So I was wondering if anyone of you could help me determine if I can replace the processor and the graphics card on my laptop and if I can provide some suggestions to what I should look at, since I read that chaning a CPU on a laptop is sticky bussines.

  Thank you in advance.

  Also if there is more information needed please tell me so that I can add.

  Please have look at the below information shown for the processor upgrade

  http://h10032.www1.HP.com/CTG/manual/c03733729 [Go to Page 1] 

  Intel Core i5-3337U (1.8 GHz, turbo up to 2.7 GHz, 1600 MHz/3 MB L3 cache, dual core, 17 W)

  Note: You already use the last chart on your laptop

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• HP Pavilion Sleekbook 15 TS. Next Message: Preparation AutoFix and then closes.

  Our laptop 6 months old is not working - I have to return it under warranty.                  It is a HP Pavilion Sleekbook 15 TS. Next Message: Preparation AutoFix and then closes. Journal F2: Specifies the ID of hard drive failure: failure of RTQHBO-6RJ75J-6OQW03 and the software. He came with Panda 2014 Spyware, but does not start in safe mode. Any who have experienced the same problem with this computer laptop touchscreen HP and how best to solve.

  Hello

  Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  As your laptop is still under warranty, contact HP and will make repair - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• separate user and HP Pavilion Sleekbook Windows 8 account passwords

  The Black Friday 2013, I bought a HP Pavilion Sleekbook running Windows 8 and has a tactile ability.  After that I loaded an update to 8.1, my computer at the next startup said it was up to the previous version of Windows and tried to make repairs. The operation failed with my refresh attempt.  I had to reset that completely erased my files.  On reboot, the requested lock screen my Microsoft email account and the password, he has not before.  Not knowing not if it would ruin, with a different password, I used the real one not my original password computer.  Now, I have to use my Microsoft account password to unlock my computer.  I want to change my lock screen password change my password of the Microsoft account.  Would defeat the purpose of changing the password.  Any help would be greatly appreciated, TMS

  Hello Kiralinde

  I hope that you do not give because your last post made me know what you wanted. The problem is not that you must change your password to what we must do is to change your profile to use a Microsoft Account to a local account. Follow the steps I am outlining below and you should fix:

  Step 1. The Control Panel (Display icon), click/click on the user accounts icon, click on / tap open the link Edit my account in the settings of your laptop .

  2. open the step PC settings, click/click on users on the left, click/tap on the shift to a local account on the right side.

• HP Pavilion sleekbook 14-b064LA not in the HP SoftPaq Download Manager 3.4

  HP Pavilion sleekbook 14-b064LA are not not in the HP SoftPaq Download Manager 3.4.

  We need Pack this driver in the sequence of tasks Microsoft SCCM to push users in Argentina. Kindly help.

  Download Manager Support HP currently lists only companies products.

  If your model is not a business model, we recommend that you visit http://www.hp.com/#Support and enter your model and the BONES to see that SoftPaqs are available.

  Please make sure the country where the computer was purchased at the bottom left of the page.  If this isn't the case, please click on the name of the country that is currently selected and choose the appropriate one.

  Once the country is selected, click 'Support & drivers' at the top of the page, click "drivers & software".  After this, please follow the instructions on the following pages.

• Battery for HP Pavilion Sleekbook 14

  Does anyone know what battery I need for the HP Pavilion Sleekbook 14-b008ea?

  He was bought as a display model of the Comet and had not one included.

  Hello james769,
  
  Assuming you have the laptop you have the HP Pavilion Ultrabook 14-b008ea (http://goo.gl/N3Yi5)
  
  These are the batteries that would be acceptable to use
  http://goo.GL/g1ZwT
  http://goo.GL/6ySVS

• HP Pavilion Sleekbook PC 14: Recovery of Windows 8: PC in a reboot cycle?

  Laptop model: HP Pavilion Sleekbook PC 14
  Product number: C7D58PA #AKL
  The system board ID: 18F9
  BIOS version: F 18
  Editor BIOS: Insyde

  64-bit Windows 8 (I think, unless he updated to 8.1 I don't know)

  No drive CD or DVD (Ultrabook).

  It is a laptop from a friend. At one point, he pointed out that it shows just a black screen with the mouse cursor after the start it (after loading Windows 8). He has no idea of what happened before that, I read a lot of online reports of people having problems after such a broken Microsoft updates for Windows 8 or 8.1.

  Anyway, it goes well with the idea of "clean install", nothing needs to be backed up. Recovery media (USB key) was created at the time. I start the laptop with the recovery media and get to HP Recovery Manager. I select 'Factory Reset' which is supposed to erase the whole hard drive and restore the initial factory condition.

  After some time (30-60 minutes, not sure), it has completed preparations, which I assume were re - create the recovery on the hard drive partition, etc. It is said the PC will start itself several times during the recovery process, and I should not meddle. Ok then.

  After I let it continue, Notepad starts, HP logo and the circle of rotation. After a while, I see a glimpse of what appears to be an empty office of Windows and a window that says something like:

  HP laptop
  < date > < time > (e.g. 14/08/2015 11:15)
  Please wait...

  (there is a button in there I think)

  Which is available for a fraction of a second, but then the laptop restarts automatically just and this very fact time and time again, showing this dialog screen each time after you start HP logo. I waited about 8 hours, and it continued just do so that even, it seems that the recovery process is interrupted every time with a reboot. If this restart is due to a system error, where I can see the journal, IE. What is the error?

  So, what to do next? I have reset defaults in case where (though I think that nothing has ever changed in any case) BIOS, no effect. I have not tried to update the BIOS, but even if I find a new/UEFI BIOS for this laptop, I would try rather than as a last resort, or after that I have the PC back on.

  I also tried the other recovery options, lighter, ('System Recovery' and 'Reduced Image recovery') prior to "Factory Reset", but they have not yet further, I think.

  In addition, I ran a full system check in the start menu (RAM and hard drive), everything was reported as fine.

  Yet one thing that may or may not serious, in case there is a problem of Windows 8: since the PC HP is bought in Thailand, it has a cheaper, 'reduced' Windows 8 version. It's a play full version, but apparently a kind of 'reduced' version that Microsoft sells cheaper on some countries, such as the Thailand. I'm not entirely sure what the restrictions are, at least you can not change the language of Windows system after the initial selection of IIRC (when Windows 8 was executed first to complete installation preloaded, English was chosen as the language of the system).

  I mention this only because I'm not sure if it causes certain restrictions on workarounds, such as the use of some other Windows 8/8.1 recovery media created on another PC or downloaded an ISO from Microsoft, or somesuch. I have already learned the hard way that not all editions of Windows seem to be created equal with regard to the options of recovery, being able to launch the etc SafeMode (at least this was the case with my Windows 7, a lot of instructions online for just would not work on it because they are expecting boot options that simply weren't there).

  USB media recovery that I use is created initially, according to HP.

  Problem solved. Steps to follow:

  1. forget about HP recovery. Of course it does not work for me little matter how I pray, I went to come and clean up the entire hard drive of all partitions (I presume that the recovery partition went too).

  2. create the installation media Windows 8.1 with Microsoft http://windows.microsoft.com/en-US/windows-8/create-reset-refresh-media media creation tool

  I created the USB media on a USB flash drive of 8 GB on another PC. It will work and install correctly on Windows 8 system, no need to install first 8.0 and then he move to 8.1.

  3 boot from the installation media, install (I chose the option to not save or move anything old windows, after all he was not supposed to be any previous Windows installed) and a great success. I guess you have to download and install drivers from HP separately, perhaps,

  In fact, I am now upgrading to Win10.