The new gpu in illustrator acceleration does support 750ti GTX?

Similar Questions

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• I have some pluggins I used in after effect 2014 CC and when I updated to the new version 2015, pluggins commentator does more work because they are not be updated yet, my question is how can I go back to the old version

  I have some pluggins I used in after effect 2014 CC and when I updated to the new version 2015, pluggins commentator does more work because they are not be updated yet, my question is how can I go back to the old version

  cc desktop application allows to install the previous versions.

  Here's how (about 1/3 of the bottom of page), download and install Adobe Creative Cloud apps

• Need information about the new version of Illustrator

  I am currently using my version of Illustrator CS3, but I was wondering if Illustrator grew to take in addition to the features that we used to have in Freehand. Here are the features that I miss more Freehand:

  1.) able to appoint work and change in the world through research and replace the function of art (change the outline width, fill color etc..)

  2.) here is the big one, I need: ability to select several works of art and modify each one in place. In other words, if you select three items and choose "turn every" they each turn by specified amounts, each in their place and not as a set.

  If the new version of Illustrator has had on these projects or even simply the need 2 above, spring for the new CS5 package.

  Thank you

  Ken

  (1) n ° but you can save the selections and reload. Create selections using Select > same. Or save an illustration as a symbol, and then change the symbol. (All possible in CS3)

  (2) you can already do this in CS3 (object > transform > transform each or effect > Distort & Transform > transform each)

  So, really, you can do everything you mentioned. CS5 did not specifically any achievements in these areas.

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

• Satellite P100 - 222 PSPA6E - when the new GPU driver will be available

  Hello!

  Me laptop Satellite P100-222 (PSPA6E), a GeForce 7900GS Videocard. Vista operating system is established. Display version 7.15.11.5666 driver.
  The driver are already obsolete, to some new 3D schedules it has a bad display of structures and so on.

  It would be desirable to learn, when appears in new display driver?

  Hello

  > when will appear in the new display driver?

  Who knows I didn t find any info on the Toshiba page.
  But as far as I know the many laptop models are equipped with the same graphics chip.
  Therefore, you can also try a driver for another model that was equipped with the same GPU chip.

  Welcome them

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• Windows Vista install the new WD hard drive empty - does not not :(

  It was my original question: http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-Pavillion-a6645f-No-hard-drive-detected-BIOHD-2-err...

  And now...

  I got my CD of HP recovery and ordered a new WD 500 GB HDD... same features as the seagate who pooped me and I can't get windows install on the new HD

  No matter what I do, computer wants to open the Recovery Manager and according to the available procedure does not work.  It works me in circles asking for #1 drive, then the drive recovery supplement and back with no progress.

  What I have to do is use this form: http://vistahomepremium.windowsreinstall.com/installnewhdd/installnewhdd.htm but only the Recovery manager opens when I boot from the CD.

  Anyone have any ideas?

  If I followed your questions correctly... you had a BIOHD-2 error, ordered HP recovery discs, replaced the hard drive and tried to restore your system with no luck. Is that a correct assessment of the situation?

  OK, you need to make a Windows Vista install screen... not who's going to go with your HP recovery CD/DVD. The disks do not contain the Windows installation routine, only the HP Recovery Manager. These discs contain more or less, an image of the HP installed OS and software, plus some drivers and applications. To the best of my knowledge, you should have three DVDs (1 of 3, 2 of 3 and 3/3) more an additional drive. You should boot from CD 1 of 3... Then, when asked to insert the 2/3... Then, when asked to insert 3/3. And finally if/when necessary additional drive.

  At HP; Recover the system after the hard drive is replaced (Windows Vista)

  Frank

• had to install the new hard drive, windows key does not

  My hard drive died in my Inspiron 660. I ordered a new hard drive and a recovery Dell USB key. A recovery key for Windows 8 pro based on my recommended by Dell service tag. I installed the new drive and used the recovery key to install Windows 8 pro. I then used a third-party tool to get the product key from the BIOS. The product key does not work. I wonder if the product key on the BIOS isn't for Windows 8, Windows 8 pro. If so, the wrong recovery key recommended by Dell.

  What should I do to activate Windows successfully?

  Secondly, on my old drive hard, I had upgraded to Windows 10 while he was a free upgrade. How to bring back the free update?

  Windows 8, Windows 8.1 and Windows 10 TH1 and TH2 had problems installing specific edition. Your key can be a simple language edition or one with Bing edition and therefore rejected by the installation of the edition of bad media.

  Windows 10 TH2 and later all the windows 8.x and 7 OEM keys are treated as Windows 10 keys. Edition installation specific issues have been fixed with Windows 10 RS1. The file .iso Windows 10 RS1 image is covering several editions. It contains all OEM editions and will automatically collect a key Windows 8/8.1/10 UEFI BIOS OEM System Locked Preinstallation and automatically installs the correct edition of Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

• I just updated my first at 2015.3. Now, it will not open one of my projects. It is said that they must be converted to the new version and then it does nothing passed. I need help.

  I just updated my Adobe Premiere 2015.3. He says now that all my projects were made in an earlier version. When I hit ok to update to convert to the new version. I have hot ok. Then just a project convert box and not going anywhere after that. Does anyone have any ideas as to what is the cause.

  I'm on a Mac 10.9.5.

  Any help would be received with gratitude that I am now on the ground at the judgment and may not work.

  CC 2015.3 is not an update until 2015 for CC (as it seems). It's actually a separate installation. So you can have it installed next to the CC 2014 and 2015 CC versions of Premiere Pro, if you wish.

  Default cloud creative app to remove older versions when you install new ones as shown here. (Which is a really stupid idea, in my opinion, but nobody asked me).

  If nothing else, you can reinstall any old version that you like. Your subscription to the CC includes all versions of Premiere Pro including CS6, CC, CC 2014, 2015 CC and CC 2015.3. Details to install older versions are here.

• Performance inside Premiere Pro (search for the new GPU)

  Hey everybody,

  I do a lot of green overlay inside After Effects with the Keylight plugin. Then I pass this comp to Premiere Pro where I do the editing. I really like this workflow, but my system has trouble reading the images in real time inside Premiere Pro. I must point out that I work with the Lumix GH4 in 4K (native). Here is a list of my current hardware:

  • CPU: Intel i7 3930 k (3.2 Ghz, 6 hearts)
  • Memory: 8GBDDR Crusial 1600 Mhz (x 4 = 32 GB total RAM)
  • Scratch disk: WD 7200 RPM in a RAID5 configuration
  • Application disc: Crusial M4 SSD
  • GPU: Gainward GTX580 3 GB

  Far as I can tell I think that fixed problem is at the limit of my GPU software. So my question is, this will help to invest in a "GIGABYTE GeForce GTX 760 4 GB"?

  Thanks in advance,

  Jordy

  You can use the Ultrakey inside the first. It's accelerated gpu and therefore very fast. For editing, the quality should be good enough and for the final touch, just send the clip to ae.

• I transferred CS5 to a new computer using the PC transfer program. CS5 starts on the new computer, OK, but now does not recognize raw files. Should I uninstall and reinstall again?

  CS5 I transferred to a new computer using ultimate PC mover. CS5 seems to start normally, I had to insert the serial number of my original CD. However, now, the program does not recognize files CR and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer by using the original CD, and then reinstall CS5 using the CD on the new computer?

  I finally got to work. I had to load the files CR of adobe several times but it finally worked. Thanks for your help.

• PC does not start after the installation of the new gpu (GTX Gigabyte 770 2 GB)

  Hi, I just bought a 770 2 gb gigabyte gtx and my pc is stuck in the bios screen and beep every 10 seconds, I think that the version of the bios or the pcie is not quite new

  Data sheet: HP - Pavilion h8-1040

  Mobo: Pegatron IPISB-CH2 (Chicago)

  Intel core i7-2600 3.40 ghz

  10 GB of ram DDR3

  650W PSU

  If its my motherboard what motherboard will u recomanded stay that fits my case, GPU, ram and processor

  THX in advance (im french sory for bad English)

  Hello again @nitrox,

  Unfortunately, I can't make a specific recommendation on a motherboard. I can however advise you to make sure that the motherboard that you buy not if you are going to use the same case is a form of plant uATZ and if you want to use the graphics card you bought ensure you that the motheboard has PCIe 3.0 expanstion slots. You'll also shop for a new processor and RAM probably as well. Shop and you can find packages where a motherboard, processor and RAM are all included.

  I hope this helps. Have a great day and thanks again for the display on the HP Forums.

• Compatibility problem of motherboard with the new GPU [h8-1214]

  I tried to upgrade my GPU [gtx 560] to a [ti gtx 780] and it seems that when I install my end card higher than my computer [h-8 1214] won't go past the splash screen.

  My OS is windows 7 64 bit.

  I already did to try to fix things:

  -Power supply is adequate and bronze certified (750w)

  -Update my BIOS

  -try a different card (gtx 770) video

  At this point I am sure that it is the motherboard having problems, I would like to know if there is a work around or should I just get a new motherboard.

  Sianmors, welcome to the forum.

  You are right.  It's a motherboard problem.  Your new video card requires the UEFI Firmware in the motherboard, instead of the standard BIOS.  HP didn't start using UEFI until mid-October 2012.

  I suggest that you contact the maufacturer Technical Support to see if they have a VBIOS update that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.