PC does not detect not monitor

Similar Questions

• Web site does not monitor

  I preview my new-designed (using Dreamweaver) site on my iMac and 15 "Powerbook screens in Safari and Firefox, and this worked perfectly. I sent it to my friend who said it worked perfectly on his Powerbook 15 "but not on his Apple Mini with a 15" Acer display. On the Acer, it had to scroll to the right to see the right side of the site. What because the resolution is too low? My site is based on a table 1200 px wide.

  And you PAID for this class?

  Tables have not been to the recommended way to create Web sites for a dozen years now.

  DIVs are definitely the way to go.

  Bob

• Can someone tell me which makes snmp service send a trap event. I mean, snmp does not monitor anything. To send a trap, a person or an application request SNMP to do. Which?

  I was doing some research on SNMP and MIBs.Hit a roadblock when this question came to my mind. Windows stores all MIBs under

  %SystemRoot%\System32

  I know that these MIBs are used to send traps. I just want to know the throughput, or how it's done. Who reads all this information and provides it to the snmp service to send a trap event? If I need to send traps that are defined in some other MIBs, how can I do it?

  Any help will be appreciated. :)

  Hello

  The question you posted would be better in the Technet forum. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

• CQ5320F, 40 seconds after the start, circle beep 3 seconds pause, 5 seconds, does not monitor

  Mine is Compaq Presario CQ5320F desktop PC, Windows 7 64-bit, monitor showed no, 40 seconds after the computer starts, it starts making beep for 3 seconds, then pause 5 seconds, 3 seconds, then pause 5 seconds...

  Thank you.

  I unplug the Mobo RAM and reinsert the memory into the slot and turn on the computer, it has a different tone, so I decide to replace the motherboard first. I am now waiting for my order of Mobo will then publish.

  I replaced the motherboard, and there work now.

  banhien wrote:

  Hello

  Please visit the following link to determine the error and after return. In my view, must be something to do with the RAM, can you reinstall them (it) and try again?

  http://www.computerhope.com/beep.htm

  Kind regards

  BH

• Question using FX100 and Windows not registering does not monitor arrangement.

  I am using Dell FX100 and view 4.5.  All of my users have two Dell monitors, and some of them want to move the main monitor to the right side and extend to the left. It's easy to set up, but I can't figure out how to keep memory settings after reboot/logoff of Windows. Any suggestions? I tried to save a theme without success.

  Go to power on the Zero Client, before you connect to a desktop computer:

  Options - Settings - display topology.

  From there, you will see what you need to do.

  Gunnar

• Screen color does not monitor calibration

  My monitor colors are OK, but photoshop apparently hate grey/grey.

  Any help on how to fix this?

  I've provided a screenshot and the istock photo is a screenshot which is supposed to be black and white. There is a cream/peach color that took my grey.

  Thank you

  * SG *.
  

  Here, try to calibrate your monitor with this: http://www.calibrize.com/

• Indoor walk/run - HR monitor does not?

  If not sure if this is a bug or if the program was designed like that, but when I select the indoor walking or exercise running, the watch does not monitor my heart rate (I tried with a chest strap (Polar) and optical sensor). How it exactly calculate calories burned if you don't measure my HR? Just by the time and distance? Especially for me who works on a maximum incline on treadmill.

  I would like to reset once

  Restart your Apple Watch - Apple Support

  Also make sure it is warm with a good fit

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• HP paviliion x 2 10-n002nl: microphone does not work on Hp pavilion x 2 10-n002nl

  Hello

  as in the title, I have problems with the microphone, I can't here my voice well when I sign and on Skype.

  How can I solve this problem?

  Thanx

  Emanuelelon,

  My apologies, I was never notified that you answered. Its been a problem with the forum recently.

  There are a few things to try if you still experience the problem. I'll post them even though its been a month that you posted.

  Go to control panel > hardware and sound > Sound. In the window that opens, select the recording tab, highlight the internal Microphone array and click Properties. Select the levels, make sure the slider for Microphone Array is 100%.

  Select the Advanced Settings tab and try to uncheck to allow applications to take exclusive control of the device.

  Apply and OK and close all open windows.

  Some have argued also that the driver update contributed.

  HP Software and Driver Downloads

  Direct download - SP 72832.exe

  IF you're still having problems with the microphone, you will need to contact HP support directly for a warranty issue.

  Contact HP worldwide | HP® official site

  -------------------------

  NOTE: HP Support does not monitor this forum that it is a (volunteer) arena of Peer to Peer.

• Stop does not not for scoring of dynamic text

  Stop for score does not. When my score is 30, he should go to box 5

  Stop();

  var score: Number = 0;

  movieClip_1.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler_2);

  function fl_MouseOverHandler_2(event:MouseEvent):void

  {

  score = score + 10;

  Text1. Text = String (score);

  }

  {if(score==30)}

  gotoAndStop (5);

  }

  The code that you show it will run only once, immediately entering into this framework - it does not monitor for a change in value.   Unless you return permanently to this image so that the code runs repeatedly, it's only going to run this code if() once while you are in the frame.  If the score is not 30 when you enter this setting it will not fall in box 5.

  Place it inside the function where it runs every time that the partition change and see if it does what you want...

  function fl_MouseOverHandler_2(event:MouseEvent):void

  {

  score = score + 10;

  Text1. Text = String (score);

  {if(score==30)}

  gotoAndStop (5);

  }

  }

• Z50 does not detect second monitor HDMI

  I recently purchased the Lenovo Z50 - 70 with 16 GB of ram and nvidia 840 m video card.

  Today I tried to connect the laptop to my LG 47LA6208-ZA, but the laptop does not recognize a second monitor. When I try to detect that another monitor nothing find it.

  I don't know there is no problem with the tv or hdmi cable, cause another pc with a cable hdmi even on the same port hdmi works perfectly.

  Any ideas what could be the problem here? I have already updated all the drivers.

  However, I do not know on what card video the hdmi port is on, the nvidia or intel on board.

  Any help would be appreciated!

  It turns out that the hdmi cable is the problem after all! Which is really strange, cause there is no problem with the other pc. However, I am very happy that this is resolved! Thanks for the support!

• My sager laptop does not detect my external monitor.

  My sager laptop does not detect my external monitor.  How can I do detect my monitor?

  Hi William,.

  1. What is the operating system installed on the computer?

  2. what happens when you connect an external monitor, receive no error message?

  I suggest you to follow the steps and check if it helps.

  Check out the links and check if that helps.

  Work and play better with multiple monitors for Windows 7

  Add a second monitor

  I hope this helps.

• NOR-XNET Bus Monitor does not detect port

  Hi all

  I need somehelp. I have 2 PXI-8512 and assembla CAN1 CAN2, CAN3 and MAY 4.
  I want to control my XNET data traffic. Yes, they are available in MAX. But once I open the monitor of Bus OR-XNET, every channel I have are not detected.  Interface name box is empty, does not show anything.

  Here is a screenshot.

  

  Someone knows what's the problem?

  Thanks for help.

  Rajamodol

  Hey Rajamodol, Nicola.

  I'm sorry, but this is a limitation of the distant targets in XNET bus monitor. See the following Knowledge Base article:

  Why can I not see my NOR-XNET CAN interface on my remote target in Bus monitor? -National Instruments
  http://digital.NI.com/public.nsf/allkb/92F10284E8061FB68625793600484D79?OpenDocument

  The article also mentions an alternative, where you use an example VI for a similar feature.

  Best regards

  Christoph

• T400 and Advanced Mini Dock - does not detect DVI monitor

  I have a T400 with integrated graphics and Windows 7 Professional 64-bit, and I recently bought an Advanced Mini Dock for it.  I have a Dell 1800FP monitor connected to the dock via the DVI output.  When I anchor the T400, the system does not detect the external monitor.  If I go to the resolution of the screen and click on detect, it does not appear.  The weird part is that if I reboot then than in the dock, when the system comes back he * is * detect and use the external monitor.

  Any ideas what's happening?  Other equipment connected by the base (USB, Ethernet cable devices) all work very well.

  I think I solved this problem.  I uninstalled my video driver and installed the latest version from the Lenovo Web site (which was more recent than the one found by Lenovo System Update).  Now my system properly detects the external monitor when I attach to the docking station.

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• Windows 7 does not detect external monitor!

  Hi I have a huge dilemma!

  My laptop does not recognize the external monitor. Earlier in the day, he detected the external monitor and perfectly well worked through to extend, in doubles, you name it. However, after restarting my computer, I was unable to get the external display to be recognized...

  I use a laptop Lenovo y470 and nvidia gt 550 m 64-bit. I've updated the grahpics card but in vain...

  The way I have it plugged into the external monitor is using a hdmi cable to connect the laptop to a monitor for a DVI-HDMI adapter. Basically, the dvi port became a port hdmi with this adapter.  its dvi - d.

  I think that restarting the computer developed a few updates and the graphics card only connects via VGA or HDMI and DVI not? I'm not sure... I'd love any idea of a solution.

  Hello

  If you do not see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

  Make sure that the monitor you want to extend your desktop is turned on and plugged the correct video port on your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

  Method 1:

  For more details, see the following articles:

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Method 2:

  I suggest you to check the history of update for the recently installed updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Method 3:

  I suggest to see the link and try to run the troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 4:

  I suggest that you try to do a system restore and check whether the problem is resolved.

  In Windows 7 system restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">